Answer: American red squirrel
Explanation:
The American red squirrel is the smallest squirrel. The color of the fur may vary from season to season. The color of the squirrel can also vary depending of the environment in which it lives. In summer the black stripe appears on the sides over the white fur. It has a backbone and like other mammals nurses the offsprings. It has a bushy tail. It is a native of North America. Red fur appear on the back and white on the belly. Strong claws, strong muscles, and compact body are other key features of the squirrel.
Body Color is a ___________
Variation
Trait
Feature
Observation
Experimental value of acceleration due to gravity is found to be
9.842 m/s2. The accepted value of acceleration due to
gravity is 9.81 m/s2. What is the percent error in calculation?
Answer:
0.33%
Explanation:
From the question given above, the following data were obtained:
Experimental value = 9.842 m/s²
Accepted value = 9.81 m/s²
Percentage error =?
The percentage error in the calculation can be obtained as follow:
Percentage error = |Experimental – Accepted| / Accepted value × 100
Percentage error = |9.842 – 9.81| / 9.81 × 100
Percentage error = 0.032 / 9.81 × 100
Percentage error = 0.33%
Therefore, the error in the calculation is 0.33%
how does bases taste?
Answer:
bases taste bitter, feel slippery, and conduct electricity when dissolved in water
Explanation:
Answer:
like peas
Explanation:
Which fuel does not produce air pollution when it burns
Answer:
Natural gas
Explanation:
Natural gas is pretty clean when it burns compared to other gases.
Weathering, erosion, and deposition by water, wind, and ice are interactions between
which two of Earth's systems?
(a) calculate the %ic of the interatomic bond for the intermetallic compound tial3. (b) on the basis of this result, what type of interatomic bonding would you expect to be found in tial3?
Answer:
See explanation
Explanation:
We know that
%ic of the interatomic bond = [1 - e^-(XA - XB)^2/4] * 100%
Now;
XA = electronegativity of Ti = 1.61
XB = electronegativity of Al = 1.54
Substituting values;
%ic of the interatomic bond = [1 - e^-(1.61 - 1.54)^2/4] * 100%
%ic of the interatomic bond = 0.12%
Given the low %ic of the interatomic bond, the bond is metallic.
The percent ionic character is 0% and the type of interatomic bonding would be metallic.
The percent ionic character can be determined by using the formula,
[tex]1-exp{-0.25(Xa-Xb)^{2} ][/tex]
• In the given equation, Xa and Xb refers to the electronegativities of the elements.
• The intermetallic compound given is TiAl₃.
• Based on the electronegativity table, the electronegativity of Al or Xa is 1.5 and the electronegativity of Ti or Xb is 1.5.
Now putting the values in the above formula we get the % ionic character,
[tex]= 1-exp [-0.25 (Xa -Xb)^{2}]*100%\\\\\\=1-exp [-0.25 (1.5 -1.5)^{2}]*100%\\[/tex]
[tex]= 0 percent[/tex]
Thus, the ionic bond character is 0% and the compound TiAl₃ comprises two metals, it exhibits metallic bonding.
To know more about:
https://brainly.com/question/10889818
Balance the following equation. ___MgCI2+ ___ AgNO3-->___Mg(NO3)2
Answer:
MgCI2+ ___ AgNO3-->___Mg(NO3)2
i think u put 2 before NO3
Explanation:
Balance each of the following equations by placing coefficients in front of the formulas as needed MgO(s) Mg(s) + 02(8) ZnCI.(ag)
Is the equation wrong. Such a equation cannot be formed. pls enter the write equation i will help you
helllppp i have a test!!!!
A compound has a molar absorptivity of 40.9 cm ^ - 1 * M ^ - 1 at 293 nm. If a 1.00 cm cuvette is used, and the absorbance found to be 0.111, what is the concentration of the sample ?
Answer:
0.00271 M
Explanation:
To solve this problem we can use the formula:
A = ε * C * lWhere A is the absorbance, ε is the molar absorptivity, C is the molar concentration and l is the optical path length.
We input the data given by the problem:
0.111 = 40.9 cm⁻¹M⁻¹ * C * 1.00 cmAnd solve for C:
C = 0.00271 MThe study of chemicals is called chemistry.
The correct answer is 0.00271 M
To solve this problem the formula is used as follows:-
A = ε * C * l
The data is given as follows:-
A is the absorbance,ε is the molar absorptivity, C is the molar concentration l is the optical path length.
[tex]0.111 = 40.9 * C * 1.00[/tex]
After solving the equation the value of C is as follows:-
[tex]C = 0.00271 M[/tex]
Hence, the correct answer is 0.00271.
For more information, refer to the link:-
https://brainly.com/question/14698383
A 57 g g sample of iron reacts with 24 g g of oxygen to form how many grams of iron oxide?
A 57 grams sample of iron reacts with 24 grams of oxygen to form 81 grams of iron oxide.
What is iron oxide?
Iron oxide is a chemical compound that is made by the addition of iron and oxygen can also be known as ferrous oxide if react with two oxygen molecules then ferric oxide.
In the sample, the iron is 57 grams and the oxygen is 24 grams,
Fe + O -------------> FeO
Iron oxygen iron oxide
By adding the mass of iron and oxygen,
57 + 24 = 81 grams of iron oxide.
Therefore, the mass of iron oxide is 81 grams if 57 grams sample of iron reacts with 24 grams of oxygen.
Learn more about iron oxide, here:
https://brainly.com/question/9496279
#SPJ2
The absolute temperature of a gas is increased four times while maintaining a constant volume. What happens to the
pressure of the gas?
O It decreases by a factor of four.
O It increases by a factor of four.
O It decreases by a factor of eight.
O It increases by a factor of eight.
Save and Exit
What is the density of a brick with a mass of 150gm and the sides are 2cm long 5cm high and
5cm wide?
Which of these pairs of elements have the same number of valence electrons?
I need 11 12. 13. 14. 15. And 16 please and thank you ❤
Answer:
11.) Radio
12.) Microwave
13.) Infrared
14.) Ultraviolet
15.) X-Ray
16.) Gamma Ray
Radio waves have the longest wavelength, and gamma rays have the shortest wavelength.
What is the molecular polarity of calcium hydroxide
Answer:Calcium hydroxide is a polar compound. 2. Carbonates are insoluble in water unless it is combined with NH4+ or any group 1A ion. It is a colorless crystal or white powder and is produced when quicklime (calcium oxide) is mixed, or slaked with water.Ca(OH)2 is an ionic compound, in which Ca is the cation and OH is the anion. Ca (calcium) has a charge of 2+, since it is in group 2 on the periodic table.
Explanation: hope this helps and have a great night
14) Propane, C3H8, is a hydrocarbon that is commonly used as fuel for cooking.
a) Write a balanced equation for the complete combustion of propane gas, which yields CO2(g) and
H2O(l).
b) If 10.0 g of propane undergo combustion, how many moles of oxygen will be consumed?
c) Assuming that air is 21.0 percent O2 by volume, calculate the volume of air needed to completely
combust 10.0 g of propane at 30oC and 1 atm
d) If the combustion of propane produces 2220 kJ/mole, how much energy is produced when 30.0 g
of propane undergoes complete combustion?
e) If the process described in d) above occurs in a calorimeter containing 8.25 kg of water, calculate
the change in temperature of the water that would be observed.
Pls help I’ll mark brainliest pls pls pls
Answer:
the tea was not hot sugar dissolves quickly and hot water than cold
An object has a mass of 15.2 g and a volume of 8.9 mL.
What is the density of the object?
Answer:
recordando también que ** 1mL = 1cm ^ 3 **
(como ** 1 dm ^ 3 = 1 L **)
What will be the volume occupied by 100 grams of oxygen gas
at STP?
Answer:70L
Explanation:
The volume occupied by 100g of oxygen gas at STP is 70L.
1 mole of a gas at STP occupies 22.4 L volume.
The same goes for oxygen gas, [tex]O_2[/tex]. 1 mole of [tex]O_2[/tex] occupies 22.4L volume.
Now the molar mass of [tex]O_2[/tex] is = 32g
So the number of moles of [tex]O_2[/tex] in 100g is
n = 100/32
n = 3.125 moles
Volume occupied by 3.125 moles or 100g of [tex]O_2[/tex] is
V = 3.125 × 22.4 L
V = 70 L volume is occupied by 100g of oxygen gas.
Learn more :
https://brainly.com/question/19958403
An artificial reef is intended to affect the ocean ecosystem by — А A removing pollution from the water B В providing shelter for marine organisms causing sediment to erode into deeper waters D preventing people from overfishing along the shore
Answer:
B
Explanation:
just answered
An artificial reef is intended to affect the ocean ecosystem by providing shelter and habitat for marine organisms causing sediment to erode into deeper waters. Hence, option C is correct.
What is artificial reef ?An artificial reef is a human-made underwater structure, typically constructed with the purpose of enhancing marine biodiversity, providing habitat for marine organisms, and promoting recreational activities like fishing, diving, and snorkeling.
Artificial reefs can be created from a variety of materials, such as concrete, metal, tires, and sunken ships. The reef structure can also increase the overall biodiversity of an area by creating a new habitat for species that may not have been present before.
Additionally, the presence of an artificial reef can help to reduce pressure on natural reefs by providing an alternative location for fishing and other activities. However, artificial reefs are not typically used as a means of removing pollution from the water or preventing erosion.
Therefore, option C is correct.
Find more on artificial reef:
https://brainly.com/question/17238115
#SPJ2
Newton's Law of Gravity says that any the effect of gravity between two objects depends on what two factors?
Answer:
Explanation:
you sack
Help!!
Which set of Earth components is arranged in order from solid to liquid to gas?
hydrosphere, atmosphere, lithosphere
hydrosphere, lithosphere, atmosphere
lithosphere, atmosphere, hydrosphere
lithosphere, hydrosphere, atmosphere
Answer:
Lithosphere, Hydrosphere, atmosphere
The set of Earth components that is arranged in order from solid to liquid to gas is D. lithosphere, hydrosphere, atmosphere
Lithosphere refers to the solid, outer part of the Earth. It is also known as the Rocky part of the Earth. It consists of the top part of the upper mantle and the brittle crust.Hydrosphere simply refers to the water on the Earth, underground and those that are in the air. This can be seen in ocean, seas, rivers, etc.Atmosphere refers to the layers of gases that can be found on Earth.ut contains gases like nitrogen, oxygen, etc.Read related link on:
https://brainly.com/question/19541638
Is salt water considered a mixture or a solution?
Answer: Salt water is a solution because it has these two characteristics: it has the same concentration of each of its parts throughout the solution, and it can be separated by some physical process.
Explanation: Literally learning about this in my science class XD
Hello,
After doing the Knewton assignments and watching some videos. I really do not understand some basics concepts of Energy. One of the questions is asking: Which of the following objects has more kinetic energy than does potential energy?
a) a compressed spring in a pinball machine just before the ball is launched.
b)a rollercoaster motionless at the top of the track.
c) a yo-yo before it is released
d)the pendulum of a grandfather clock at the lowest point of its arc of motion.
I thought that the answer was b, but the correct answer was c). I did not understand the explanation. It says " Kinetic energy is the energy of motion. Each of the objects above are motionless—with stored potential energy—except for the clock. At the bottom of its arc it will have the greatest kinetic energy, which is then converted to potential energy as it swings back up to one side"
So if someone could explain this better I would so good.
I have these orgo problems for homework and I have no idea where to even begin. We have to find missing reagents and products based on regioselectivity and stereoselectivity. Any help or explanations would be greatly appreciated!!
Answer:
Honestly makes no sense sorry :(
Explanation:
I can try though.. There are three types of selectivity possible for any synthesis: (i) Chemoselectivity is deciding which group reacts. (ii) Regioselectivity is where the reaction takes place in that group. (iii) Stereoselectivity is how the group reacts with respect to the stereochemistry of the product.
A stereospecific mechanism specifies the stereochemical outcome of a given reactant, whereas a stereoselective reaction selects products from those made available by the same, non-specific mechanism acting on a given reactant. Of stereoisomeric reactants, each behaves in its own specific way.
I tried to explain it the best I could.
Hopefully this helps you :)
Feel free to correct me If it was wrong
Calculate the volume of 2.408x1024 molecules of water vapor at STP.
89.00 L
90.00L
89.61 L
89.60 L
Answer:
B
Explanation: im not rlly sure you can go with what i said or you dont
5 What does 2Na2O mean?
Answer:
2 Na2O means two molecules of Sodium oxide.
mark me please
How many atoms of oxygen are on the reactants side of this balanced equation?
2AgNO3 (aq)+ Cu(s) —Cu(NO3)2 (aq)+ 2Ag(s)
12
2
3
6
6
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Stoichiometry
Analyzing Reactions RxNExplanation:Step 1: Define
[RxN - Balanced] 2AgNO₃ (aq) + Cu (s) → Cu(NO₃)₂ (aq) + 2Ag (s)
Step 2: Identify
Reactants: 2AgNO₃ (aq) + Cu (s)
# of O atoms: 2(O₃) = 6 O
Explain the difference between endothermic and exothermic processes. Provide an example of each.
These are reactions that transfer energy to the surroundings (ie the energy exits from the reaction, hence the name exothermic). The energy is usually transferred as heat energy, causing the reaction mixture and its surroundings to become hotter. A thermometer is used to detect the temperature increase.
Examples:
Combustion
Neutralisation between acids and alkali
Endothermic reactionsThese are reactions that take in energy from the surroundings (ie energy enters the reaction, which will help you to remember the name endothermic). The energy is usually transferred as heat energy, causing the reaction mixture and its surroundings to become colder. A thermometer is used to detect the temperature decrease.
Example:
Electrolysis
A hot air ballon will rise in air because:
Answer: C
Explanation:
Hot air is a lot less dense for a few reasons. Hot air essentially means the particles have more kinetic energy, and move around a lot more. Cold air is dense because the particles move a lot less, have less energy, and are closer together.
Answer:
A
Explanation:
Since the balloon itself is heavier than air, it must be filled with a large volume of something much lighter—either hot air or a very light gas, such as helium. Because the combined weight of the balloon and the gas is less than the weight of an equal volume of surrounding air, the balloon rises.