1. Which of the following is a true statement? a. The measure of angle A is 53°. b. The measure of angle B is 117°. c. The measure of angle C is 53°. d. All of the above are true.​

Limits of the functions are given as: Therefore, lim x→2 f(x) = 10. Therefore, lim x→-3 4g(x) = -40. Therefore, lim x→2 g(f(x)) = 3.

We start by finding the limit of f(x) as x approaches 2:

lim x→2 f(x) = lim x→2 [2x^2 / (x - 3)]

Using direct substitution gives an indeterminate form of 0/0. To resolve this, we can factor the numerator as follows:

lim x→2 f(x) = lim x→2 [2x^2 / (x - 3)]

= lim x→2 [(2x + 6)(x - 3) / (x - 3)]

= lim x→2 [2x + 6]

= 2(2) + 6

= 10

Therefore, lim x→2 f(x) = 10.

Next, we find the limit of 4g(x) as x approaches -3:

lim x→-3 4g(x) = 4 lim x→-3 (x - 7) = 4(-3 - 7) = -40

Therefore, lim x→-3 4g(x) = -40.

Finally, we find the limit of g(f(x)) as x approaches 2:

lim x→2 g(f(x)) = lim x→2 g(2x^2 / (x - 3))

Using the same factorization as before, we get:

lim x→2 g(f(x)) = lim x→2 g(2x + 6)

Now, using direct substitution, we get:

lim x→2 g(f(x)) = g(2(2) + 6)

= g(10)

= 10 - 7

= 3

Therefore, lim x→2 g(f(x)) = 3.

To know more about function,

https://brainly.com/question/28193995

#SPJ11

Answer:

B. 4

C. -40

A. -3

Step-by-step explanation:

Had the assignment and all these answers are correct, enjoy :)

p.s Keep up the great work you are doing an amazing job with school you should be very proud of yourself

The probability that a student was born in August is 1/8

To further clarify, the probability of an event happening is calculated by taking the number of favorable outcomes and dividing it by the total number of possible outcomes.

In this case, the favorable outcome is being born in August and the total number of possible outcomes is the total number of students in the class.

The given table shows that there are 5 students who were born in August.

The total number of students in the class is 40.

Therefore, the probability of a student being born in August is:

P(August) = Number of students born in August / Total number of students

P(August) = 5 / 40

P(August) = 1/8

So, the probability that a student was born in August is 1/8 or approximately 0.125.

Learn more about probability

brainly.com/question/30034780

#SPJ11

The linear function that best fits the data points is: f(t) = 2 + (1/3)t.

To fit a linear function of the form f(t) = c0 + c1t to the data points (−6,0), (0,3), (6,12), we need to find the values of c0 and c1 that minimize the sum of squared errors between the predicted values and the actual values of f(t) at each point. The sum of squared errors can be written as:

[tex]SSE = Σ [f(ti) - yi]^2[/tex]

where ti is the value of t at the ith data point, yi is the actual value of f(ti), and f(ti) is the predicted value of f(ti) based on the linear model.

We can rewrite the linear model as y = Xb, where y is a column vector of the observed values (0, 3, 12), X is a matrix of the predictor variables (1, -6; 1, 0; 1, 6), and b is a column vector of the unknown coefficients (c0, c1). We can solve for b using the normal equation:

(X'X)b = X'y

where X' is the transpose of X. This gives us:

[3 0 12][c0;c1] = [3 3 12]

Simplifying this equation, we get:

3c0 - 18c1 = 3

3c0 + 18c1 = 12

Solving for c0 and c1, we get:

c0 = 2

c1 = 1/3

Therefore, the linear function that best fits the data points is:

f(t) = 2 + (1/3)t.

To know more about linear function refer to-

https://brainly.com/question/29205018

#SPJ11

The only solution is a=b=c=d=0, which implies that the subspaces W1 and W2 are orthogonal. we have: α = -3 + 2d, β = -2 and c = 1 - 2d, We can choose d=0.

(a) To show that the subspaces W1 and W2 are orthogonal to each other, we need to show that any vector in W1 is orthogonal to any vector in W2. Since W1 is spanned by V1 and V2, any vector in W1 can be written as a linear combination of V1 and V2:

aV1 + bV2

Similarly, any vector in W2 can be written as a linear combination of V3 and V4:

cV3 + dV4

To show that these two subspaces are orthogonal, we need to show that the dot product of any vector in W1 with any vector in W2 is zero. Thus:

(aV1 + bV2)·(cV3 + dV4) = ac(V1·V3) + ad(V1·V4) + bc(V2·V3) + bd(V2·V4)

Calculating the dot products, we have:

V1·V3 = 2(0) + 2(1) + 1(3) = 7

V1·V4 = 2(2) + 2(6) + 1(4) = 20

V2·V3 = 6(0) + 1(1) + 3(3) = 10

V2·V4 = 6(2) + 1(0) + 3(4) = 24

Substituting these values into the dot product expression, we get:

(aV1 + bV2)·(cV3 + dV4) = 7ac + 20ad + 10bc + 24bd

Since we want this expression to be zero for any choice of a, b, c, and d, we can set up a system of equations:

7ac + 20ad + 10bc + 24bd = 0

where a, b, c, and d are arbitrary constants.

Solving this system, we find that the only solution is a=b=c=d=0, which implies that the subspaces W1 and W2 are orthogonal.

(b) To write the vector y = [2 3 4] as a sum of a vector in W1 and a vector in W2, we need to find scalars α and β such that:

αV1 + βV2 = [2 3 4] - (cV3 + dV4)

for some constants c and d. Rearranging, we have:

αV1 + βV2 + cV3 + dV4 = [2 3 4]

We can solve for α, β, c, and d by setting up a system of linear equations using the coefficients of the vectors:

α(0 1) + β(1 2) + c(1 3) + d(2 0) = (2 3 4)

This system of equations can be written as:

α + β + c + 2d = 2

α + 2β + 3c = 3

c = 4 - 2α - 3β - 2d

We can solve for α and β in the first two equations:

α = 2 - β - c - 2d

β = 3 - 3c

Substituting these into the third equation, we get:

c = 1 - 2d

Thus, we have:

α = -3 + 2d

β = -2

c = 1 - 2d

We can choose d=0, which implies that c

To know more about subspaces refer to-

https://brainly.com/question/31691975

#SPJ11

To write a mixed number as a division expression, one must follow certain steps. The steps are as follows:Step 1: Write the mixed number as an improper fraction. To do this, multiply the denominator by the whole number and add the numerator to it.

The result is the numerator of the improper fraction, while the denominator remains the same. For example, 3 1/2 can be written as (3 × 2 + 1) / 2 = 7/2.Step 2: Use the numerator of the improper fraction as the dividend and the denominator as the divisor in the division expression. For example, to write 7/2 as a division expression, we use 7 as the dividend and 2 as the divisor.7 ÷ 2 = Remainder 1The quotient is 3 and the remainder is 1, which means the mixed number 3 1/2 can also be written as the division expression 7 ÷ 2 with a remainder of 1. Therefore, the completed statement would be:First, write the mixed number as an improper fraction. Then, use the numerator as the dividend and the denominator as the divisor in the division expression.

To know more about division expression, visit:

https://brainly.com/question/29189074

#SPJ11

As x increases from 3 to 22 months, the value of y should tend to increase.

Using the formula for the correlation coefficient:

[tex]r = [\sum(x y) - (\sum (x) \times \sum (y)) / n] / [\sqrt{(\sum(x2)} - (\sum (x))^2 / n) * \sqrt{(\sum(y2) - (\sum (y))^2 / n)} ][/tex]

Substituting the given values:

[tex]r = [9622 - (62 \ttimes 644) / 20] / [\sqrt{(1034 - (62) } ^2 / 20) \times \sqrt{(93438 - (644)} ^2 / 20)][/tex]

r = 0.912

Rounding to three decimal places, we get:

r ≈ 0.912

Since the correlation coefficient is positive and close to 1, it implies a strong positive linear relationship between x and y.

Therefore, as x increases from 3 to 22 months, the value of y should tend to increase.

For similar question on correlation.

https://brainly.com/question/29318285

#SPJ11

The value of r obtained from the given data is a measure of the strength and direction of the linear relationship between x and y. Therefore, given our value of r, y should tend to increase as x increases from 3 to 22 months.

To compute the correlation coefficient (r), we will use the following formula:

r = (n * Σ(xy) - Σ(x) * Σ(y)) / sqrt[(n * Σ(x²) - (Σ(x))²) * (n * Σ(y²) - (Σ(y))²)]

Given the provided information, let's plug in the values:

n = 22 (since x increases from 3 to 22 months)

r = (22 * 9622 - 62 * 644) / sqrt[(22 * 1034 - 62²) * (22 * 93438 - 644²)]

r ≈ 0.772 (rounded to three decimal places)

A positive value of r (0.772) implies that there is a positive correlation between x and y. As x increases, y should also tend to increase. This means that as the months (x) increase from 3 to 22, the value of y should generally increase as well.

To learn more about coefficient click here : brainly.com/question/28975079

#SPJ11

By removing the quiz scores 0 and 100, the median stays the same (57.5) and the mean decreases (from 62.5 to 59.375).

To remove 2 quiz scores so the median stays the same and the mean decreases, follow these steps:

1. Arrange the scores in ascending order: 0, 45, 45, 55, 60, 60, 85, 85, 90, 100.
2. Identify the current median: (55 + 60)/2 = 57.5.
3. Calculate the current mean: (0 + 45 + 45 + 55 + 60 + 60 + 85 + 85 + 90 + 100)/10 = 62.5.
4. To maintain the median, remove one score from each side of the median (one lower and one higher). This way, the remaining middle scores will still average to 57.5.
5. Remove 0 and 100 to decrease the mean, as they are the lowest and highest scores. New list: 45, 45, 55, 60, 60, 85, 85, 90.
6. Calculate the new mean: (45 + 45 + 55 + 60 + 60 + 85 + 85 + 90)/8 = 59.375.

So, by removing the quiz scores 0 and 100, the median stays the same (57.5) and the mean decreases (from 62.5 to 59.375).

Learn more about median here:

https://brainly.com/question/24460174

#SPJ11

The level of measurement of the data is

a. Disabilities: Nominal or ordinal, depending on how disabilities are categorized.

b. Weight: Ratio.

c. Change in health: Ordinal.

d. Temperature: Interval.

a. Disabilities: The level of measurement of this data could be nominal or ordinal, depending on how the physician categorizes the disabilities. If the disabilities are simply listed as separate categories without any inherent order, then the data is nominal. If the disabilities are ranked in order of severity or some other attribute, then the data is ordinal.

b. Weight: The level of measurement of this data is ratio, as weight is a continuous variable that has a meaningful zero point (i.e., absence of weight).

c. Change in health: The level of measurement of this data is ordinal, as the categories for change in health are typically ranked in order from poor to excellent, with each category representing a different level of change.

d. Temperature: The level of measurement of this data is interval, as temperature is a continuous variable with equal intervals between values. However, it is important to note that the Celsius and Fahrenheit scales have arbitrary zero points, so temperature data should be treated as interval rather than ratio.

Learn more about ratio

brainly.com/question/13419413

#SPJ11

The polynomial function with the stated properties is:[tex]f(x) = -x^2 - 4x + 5[/tex]

To construct a second-degree polynomial function with zeros of -5 and 1, and goes to -∞ as f→-∞, follow these steps:

1. Identify the zeros: -5 and 1

2. Write the factors associated with the zeros: (x + 5) and (x - 1)

3. Multiply the factors to get the polynomial: (x + 5)(x - 1)

4. Expand the polynomial: x^2 + 4x - 5

Since the polynomial goes to -∞ as f→-∞, we need to make sure the leading coefficient is negative. Our current polynomial has a leading coefficient of 1, so we need to multiply the entire polynomial by -1:

[tex]-1(x^2 + 4x - 5) = -x^2 - 4x + 5[/tex]

The polynomial function with the stated properties is:

[tex]f(x) = -x^2 - 4x + 5[/tex]

To know more about  polynomial function refer here:

https://brainly.com/question/12976257

#SPJ11

The probability that a randomly selected male has a systolic blood pressure between 126.26 and 159.16 mmHg is approximately 0.8219 or 82.19%.

a) We can use the formula z = (x - μ) / σ to calculate the z-scores for the given systolic blood pressures.

For x = 102 mmHg:

z = (102 - 125) / 14 = -1.64

For x = 150 mmHg:

z = (150 - 125) / 14 = 1.79

Rounding to 2 decimal places, we get:

z-score for 102 mmHg: -1.64

z-score for 150 mmHg: 1.79

b) To find the probability that a randomly selected male has a systolic blood pressure between 126.26 and 159.16 mmHg, we need to find the area under the standard normal distribution curve between the corresponding z-scores.

Using a standard normal distribution table or a calculator, we can find:

P( -1.64 < z < 1.79 ) ≈ 0.8219

Rounding to 4 decimal places, we get:

P( 126.26 < x < 159.16 ) ≈ 0.8219

Learn more about probability at: brainly.com/question/32004014

#SPJ11

(a), we are asked to find the value of a missing quantity after performing addition. (b), we are given the total number of bears and asked to determine the number of bears that belong to a specific category.(c), we are given the final result of an operation and asked to determine one of the operands.(d), we are given the number of one category and a relationship between the two categories, and asked to determine the number of the other category.

a. Type: Missing value. Subtype: Direct question.

The problem asks for a missing value, which is the number of bears Clare got. It is a direct question because the problem asks for a specific value rather than asking to solve for a general equation.

b. Type: Part-whole. Subtype: Unknown part.

The problem involves a part-whole relationship, where the whole is the total number of bears that Clare has, and the part is the number of blue bears. It is an unknown part problem because the problem asks to find the unknown quantity of blue bears that Clare has.

c. Type: Change. Subtype: Start-unknown.

The problem involves a change in the number of bugs that Kwon has, and asks for the initial number of bugs that Kwon had before the change. It is a start-unknown problem because the starting value is unknown and needs to be determined.

d. Type: Comparison. Subtype: Unknown difference.

The problem involves a comparison between the number of red bugs and blue bugs that Kwon has, and asks to find the unknown quantity of blue bugs. It is an unknown difference problem because the problem asks to find the difference between the known quantity of red bugs and the unknown quantity of blue bugs.

For such more questions on Operands:

https://brainly.com/question/30715928

#SPJ11

a. Type: Join Result Unknown, Subtype: Change Unknown b. Type: Part-Part-Whole, Subtype: Part Unknown c. Type: Join Result Unknown, Subtype: Start Unknown d. Type: Part-Part-Whole, Subtype: Part Unknown In problem a, the type of problem is Join Result Unknown, as the problem involves adding an unknown amount to a known amount to reach a certain total.

The subtype is Change Unknown, as the problem is asking how much more bears Clare got. In problem b, the type of problem is Part-Part-Whole, as the problem involves knowing the total amount and the amount of one part to find the amount of the other part. The subtype is Part Unknown, as the problem is asking how many blue bears Clare has.
In problem c, the type of problem is Join Result Unknown, as the problem involves adding an unknown amount to a known amount to reach a certain total. The subtype is Start Unknown, as the problem is asking how many bugs Kwon had at first. In problem d, the type of problem is Part-Part-Whole, as the problem involves knowing the total amount and the amount of one part to find the amount of the other part. The subtype is Part Unknown, as the problem is asking how many blue bugs Kwon has. Understanding the type and subtype of math problems can help students identify the problem-solving strategy to use. By recognizing the structure of a problem, students can develop a plan to solve it more efficiently. It also helps teachers design appropriate instructional activities that target specific problem types.

Learn more about Subtype here: brainly.com/question/166075

#SPJ11

To find the surface area of a right triangular prism, we need to calculate the area of each face and add them up.

The triangular faces:

The base of the triangular faces is the right triangle with legs of size 6 yd. The area of a triangle can be calculated using the formula A = (1/2) * base * height.

In this case, the base is 6 yd and the height is also 6 yd, as they are the lengths of the legs.

So, the area of each triangular face is (1/2) * 6 yd * 6 yd = 18 yd².

The rectangular faces:

There are three rectangular faces on a right triangular prism, each with dimensions of length (12 yd) and width (6 yd). The area of a rectangle is calculated by multiplying the length and width.

The area of two rectangular faces is 12 yd * 6 yd = 72.

The area of the bottom rectangular faces is 12 yd * 6 √2 yd =  101.82.

Now, let's calculate the total surface area by summing up the areas of all the faces:

Total surface area = 2 * (area of triangular faces) + 3 * (area of rectangular faces)

= 2 * 18 + 2 * 72 +101.82

= 281.82 yd²

To find the volume of a right triangular prism, we multiply the area of the triangular base by the length of the prism.

Volume = (area of triangular base) * (length)

= (1/2) * 6 yd * 6 yd * 12 yd

= 216 yd³

Learn more about the Surface area here:

https://brainly.com/question/29298005

#SPJ1

Thus,  the given quantities using the t-distribution table:

(a) Xо.05, 5 = 2.571

(b) x2 0.05, 10 =  20.015

(c)  x2 0.025, 10 = 22.452

(d) 0.005, 10 = 21.59

(e) X0.99, 10 = 2.764

(f) X0.975, 10 = 2.228

To determine the values of the given quantities, we need to use the appropriate table in the Appendix of Tables.

The table we need is the t-distribution table, which gives the values of the t-distribution for different degrees of freedom and levels of significance.

(a) Xо.05, 5: The degrees of freedom are 5, and the level of significance is 0.05. From the t-distribution table, we find the value of t for 5 degrees of freedom and a level of significance of 0.05 to be 2.571. Therefore, Xо.05, 5 = 2.571 (rounded to two decimal places).

(b) x2 0.05, 10 18.307: The degrees of freedom are 10, and the level of significance is 0.05. From the t-distribution table, we find the value of t for 10 degrees of freedom and a level of significance of 0.025 to be 2.228. Therefore, x2 0.05, 10 = 18.307 + (2.228 * (10^(1/2))) = 20.015 (rounded to two decimal places).

(c) x2 0.025, 10 20.48: The degrees of freedom are 10, and the level of significance is 0.025. From the t-distribution table, we find the value of t for 10 degrees of freedom and a level of significance of 0.025 to be 2.764. Therefore, x2 0.025, 10 = 20.48 + (2.764 * (10^(1/2))) = 22.452 (rounded to two decimal places).

(d) 0.005, 10 25.19: The degrees of freedom are 10, and the level of significance is 0.005. From the t-distribution table, we find the value of t for 10 degrees of freedom and a level of significance of 0.005 to be 3.169. Therefore, 0.005, 10 = 25.19 - (3.169 * (10^(1/2))) = 21.59 (rounded to two decimal places).

(e) X0.99, 10: The degrees of freedom are 10, and the level of significance is 0.01 (since we want the upper-tail probability). From the t-distribution table, we find the value of t for 10 degrees of freedom and a level of significance of 0.01 to be 2.764. Therefore, X0.99, 10 = 2.764 (rounded to two decimal places).

(f) X0.975, 10: The degrees of freedom are 10, and the level of significance is 0.025 (since we want the upper-tail probability). From the t-distribution table, we find the value of t for 10 degrees of freedom and a level of significance of 0.025 to be 2.228. Therefore, X0.975, 10 = 2.228 (rounded to two decimal places).

In conclusion, we have determined the values of the given quantities using the t-distribution table and rounding the answers to two decimal places.

Know more about the degrees of freedom

https://brainly.com/question/30403653

#SPJ11

Structured methodologies use structure charts to show each level of a system's design, its relationship to other levels, and its place in the overall design structure.

Structure charts are graphical representations used in structured methodologies to depict the hierarchical organization and relationships within a system's design. They provide a visual representation of the modules or components of a system and how they interact with each other.

A structure chart shows the different levels or layers of the system's design, from the highest level down to the lowest level. Each level represents a module or component of the system, and the connections between the levels indicate the relationships and dependencies between these modules.

By using structure charts, structured methodologies help in understanding and documenting the overall design structure of a system. They provide a clear and concise representation of the system's architecture, allowing developers and stakeholders to visualize the system's organization and easily identify its components and their interconnections.

Other tools like Gantt and PERT charts may be used for project scheduling and management, process specifications for describing individual processes, data flow diagrams for illustrating data movement, and user documentation for providing instructions and information to users.

However, when it comes to showing the system's design structure and its relationship to other levels, structure charts are specifically used in structured methodologies.

Learn more about modules here:

https://brainly.com/question/30319966

#SPJ11

Rachel made an error in simplifying the given rational expression. Let's go through the steps to identify her mistake and find the correct simplified expression.

Given rational expression:

[tex](x^2 + 3x) / (32 + 6x)[/tex]

Rachel's work:

[tex](x^3 + 3x^2) / (22 + 6x)[/tex]

Step 1: Rachel incorrectly wrote [tex]x^3[/tex] instead of [tex]x^2[/tex] in the numerator. This is where the mistake occurred.

The correct work should be as follows:

Step 1: The numerator remains the same as [tex]x^2 + 3x.[/tex]

Step 2: The denominator should be simplified, which is [tex]32 + 6x.[/tex]

Therefore, the correct simplified expression would be:

[tex](x^2 + 3x) / (32 + 6x)[/tex]

It is important to note that no further simplification can be done without more information about the values of x or any other constraints. So, the final answer would be [tex](x^2 + 3x) / (32 + 6x)[/tex]. Rachel mistakenly wrote x^3 instead of x^2 in her work. The correct simplified expression is             [tex](x^2 + 3x) / (32 + 6x).[/tex]

For more such questions on  rational expression.

https://brainly.com/question/29061047

#SPJ8

To calculate SST, we first need to find the sum of squares of deviations from the overall mean:

SS_total = Σ(xᵢ - μ)²

where Σ represents the sum over all 15 numbers, xᵢ is each individual number, and μ is the overall mean.

Since the overall mean is 0, we have:

SS_total = Σ(xᵢ - 0)² = Σxᵢ²

To calculate SSB, we need to find the sum of squares of deviations between the group means and the overall mean:

SS_between = n₁(ȳ₁ - μ)² + n₂(ȳ₂ - μ)² + n₃(ȳ₃ - μ)²

where n₁, n₂, and n₃ are the sample sizes of the three groups, and ȳ₁, ȳ₂, and ȳ₃ are their respective means.

Since the sample sizes are not given, we can't calculate SSB.

To calculate SSW, we need to find the sum of squares of deviations within each group:

SS_within = Σ(xᵢ - ȳᵢ)²

where Σ represents the sum over all 15 numbers, xᵢ is each individual number, and ȳᵢ is the mean of the group to which xᵢ belongs.

Using the formula above, we get:

SS_within = (x₁ - 2)² + (x₂ - 2)² + (x₃ - 2)² + ... + (x₁₅ + 5)²

We can simplify this expression by noting that each term is of the form (x - a)², where x is an individual number and a is the mean of the group to which x belongs. We can expand each term using the identity:

(x - a)² = x² - 2ax + a²

Substituting xᵢ for x and ȳᵢ for a, we get:

SS_within = (x₁² - 2x₁ȳ₁ + ȳ₁²) + (x₂² - 2x₂ȳ₁ + ȳ₁²) + ... + (x₁₅² - 2x₁₅ȳ₃ + ȳ₃²)

Simplifying and collecting like terms, we get:

SS_within = Σxᵢ² - n₁ȳ₁² - n₂ȳ₂² - n₃ȳ₃²

Since we know the group means are 2, 3, and -5, respectively, we can substitute these values into the equation above:

SS_within = Σxᵢ² - 2²n₁ - 3²n₂ - (-5)²n₃

= Σxᵢ² - 4n₁ - 9n₂ - 25n₃

Using the fact that the sample standard deviation is 5, we can write:

SS_total = Σxᵢ² = (n₁ + n₂ + n₃)S² = 15(5²) = 375

Substituting this value into the expression for SS_within, we get:

SS_within = 375 - 4n₁ - 9n₂ - 25n₃

Therefore, the values for SST, SSB, and SSW are:

SST = 375

SSB = cannot be calculated without knowing the sample sizes

SSW = 375 - 4n₁ -

To know more about derivations refer here:

https://brainly.com/question/30365299

#SPJ11

The value of expression (b - c) / (c - a) is,

⇒ (b - c) / (c - a) = 1

We have to given that;

Here, a, b and c are distinct numbers such that;

⇒ (b - a)²-4(b - c)(c- a) = 0

Now, We can simplify as;

⇒ (b - a)²- 4(b - c)(c- a) = 0

⇒ b² + a² - 2ab - 4 (bc - ab - c² + ac) = 0

⇒ b² + a² - 2ab - 4bc + 4ab + 4c² - 4ac = 0

⇒ b² + a² + 4c² + 2ab - 4bc - 4ac = 0

⇒ (2c - a - b)² = 0

⇒ 2c = a + b

⇒ c + c = a + b

⇒ c - a = b - c

⇒ (b - c) / (c - a) = 1

Hence, The value of expression (b - c) / (c - a) is,

⇒ (b - c) / (c - a) = 1

Learn more about the mathematical expression visit:

brainly.com/question/1859113

#SPJ1

Given,Total = 44 + 41 = 85.The percentage of the 8th graders who estimated they spend less than an hour a day on social media can be found using the following steps:

Step 1: Determine the number of students who spend less than an hour a day on social media. From the table given, it is known that 26 of the 7th graders and 18 of the 8th graders spend less than an hour a day on social media. Therefore, the total number of students who spend less than an hour a day on social media = 26 + 18 = 44.

Step 2: Calculate the percentage of 8th graders who spend less than an hour a day on social media. The number of 8th graders who spend less than an hour a day on social media is 18.Therefore, the percentage of 8th graders who spend less than an hour a day on social media = (18/85) × 100% ≈ 21.2%.Therefore, the percent of the 8th graders estimated they spend less than an hour a day on social media is 21.2%, rounded to the nearest tenth of a percent.

Know more about Calculate the percentage here:

https://brainly.com/question/1163846

#SPJ11

Answer:

(the letter 'x' represents the amount of miles he hiked)

x≤8

To calculate the 5% commission on the total revenue generated by the TV network from producing 10 episodes, we can follow these steps:

Step 1: Calculate the total revenue generated by the TV network from producing 10 episodes.

Total Revenue = Number of episodes * Revenue per episode

Total Revenue = 10 episodes * $12,000 per episode

Total Revenue = $120,000

Step 2: Calculate the 5% commission on the total revenue.

Commission = (5/100) * Total Revenue

Commission = (5/100) * $120,000

Commission = 0.05 * $120,000

Commission = $6,000

Therefore, the 5% commission on the total revenue generated by the TV network from producing 10 episodes will be $6,000.

Learn more about  Calculate here:

https://brainly.com/question/30151794

#SPJ11

To determine if u and v form a fundamental solution set for the linear differential system x' = ax, we need to calculate the Wronskian W(u, v) = u'v - uv' and check if it is nonzero. If the Wronskian is nonzero, u and v form a fundamental solution set. The general solution to the system can then be expressed as x(t) = c1u(t) + c2v(t), where c1 and c2 are constants.

A fundamental solution set for a linear differential system is a set of linearly independent solutions that can be used to construct the general solution. In this case, u and v are potential solutions to the system x' = ax. To check if they form a fundamental solution set, we calculate the Wronskian W(u, v) = u'v - uv'. If the Wronskian is nonzero for all values of t, then u and v are linearly independent and form a fundamental solution set.

If the Wronskian is nonzero, the general solution to the system can be expressed as x(t) = c1u(t) + c2v(t), where c1 and c2 are constants. This general solution represents the linear combination of u and v, where the constants c1 and c2 determine the specific solution for a given initial condition. If the Wronskian is zero, u and v are linearly dependent, and we need to find additional linearly independent solutions to form a fundamental solution set.

learn more about linear differential here:

https://brainly.com/question/30645878

#SPJ11

If the cost equation, which represents the "total-cost" for "Lavish-landscaping" is "y=36x", then True statement is Option (c) because "Lavish-Landscaping" costs $12 per-hour-less than "Landscape designs.

To select the True statement, we compare the cost of Landscape Designs with the cost of Lavish Landscaping and determine the difference in cost per hour.

We can start by finding the cost per hour for Lavish-Landscaping using the given equation:

y = 36x,

Here, y represents the total cost in dollars and x represents the number of hours of work.

When x = 3, the total cost is $108,

So, the per-hour cost of "Lavish-Landscaping" is $36.

Next, we find the cost per hour for "Landscape-Designs" when x = 3,

For x = 3, the value of y is $144;

So, the per hour cost of "Landscape-Designs" is $48.

To find difference in cost-per-hour, we can subtract the cost per hour for Landscape Designs from the cost per hour for Lavish Landscaping:

⇒ $48 - $36 = $12;

This means that "Lavish-Landscaping" costs $12 "per-hour" less than "Lavish-Landscaping".

Therefore, the correct statement is (c).

Learn more about Equation here

https://brainly.com/question/17337691

#SPJ1

The given question is incomplete,  the complete question is

The equations y = 36x represents the totals cost, y, in dollars, to hire Lavish Landscaping for x hours of work. The table represents the cost to hire Landscape Designs.

   Number Of Hours       Total Cost($)

                  3                           144

                 4                            192

                 5                            240

                 6                            288

Which statement is true?

(a) Landscape designs costs $12 per hour less than Lavish Landscaping.

(b) Landscape designs costs $108 per hour less than Lavish Landscaping.

(c) Lavish Landscaping costs $12 per hour less than Landscape designs.

(d) Lavish Landscaping costs $108 per hour less than Landscape designs

The domain of the function is from 0 to infinity or all positive numbers.

The domain of a function is the set of possible input values or the set of all values that x can take.

The range of a function is the set of possible output values or the set of all values that f(x) can take.

The car buyer considers the depreciation of a new car by creating a function to represent the car, f(x), based on the number of years after the car is purchased, x.

Therefore, the function is dependent on the number of years after the car is purchased and can be represented as:

f(x) = g(x) + p, where g(x) is the depreciation function and p is the purchase price of the car.

The best representation of the domain of this function is x ∈ [0,∞) or x ≥ 0. The car buyer considers the depreciation of a new car by creating a function to represent the car, f(x), based on the number of years after the car is purchased, x.

Thus, the best represents the domain of the function is "x ≥ 0".The statement means that the domain of the function is from 0 to infinity or all positive numbers.

To learn about the domain here:

https://brainly.com/question/2264373

#SPJ11

To prove that a = a′ ,by combining the information from Steps 1, 2, and 3, we have proven that a = a′.

1. Use the definition of a partial order
2. Use the definition of the greatest element in set t
3. Show that a = a′

Step 1: Definition of a partial order
A partial order (denoted by '≤') on a set S is a binary relation that is reflexive, antisymmetric, and transitive. In this problem, r is a partial order on set S, and t ⊆ S.

Step 2: Definition of the greatest element in set t
An element 'a' is said to be the greatest in set t if:
- a ∈ t
- For all elements x ∈ t, x ≤ a

Given that both a and a′ are the greatest elements in t, we have:
- a, a′ ∈ t
- For all elements x ∈ t, x ≤ a and x ≤ a′

Step 3: Show that a = a′
Since a and a′ are both the greatest elements in t, we can say that:
- a ≤ a′ (because for all x ∈ t, x ≤ a′, and a ∈ t)
- a′ ≤ a (because for all x ∈ t, x ≤ a, and a′ ∈ t)

Now, as the partial order r is antisymmetric, we know that:
If a ≤ a′ and a′ ≤ a, then a = a′

https://brainly.com/question/31959359

#SPJ11

The statement, "the intensity of sound varies inversely with the square of its distance," can be explained using the inverse square law. The inverse square law states that a specified physical quantity or strength is inversely proportional to the square of the distance from the source of the physical quantity.

In other words, if the distance between the source and the receiver of the sound is doubled, the sound intensity will decrease by a factor of four. Similarly, if the distance is tripled, the sound intensity will decrease by a factor of nine.
This law applies to sound intensity because sound waves radiate outward from their source and spread out over an increasingly large area as they travel. This means that the same amount of sound energy must be spread out over a larger and larger area, resulting in a decrease in intensity.
The inverse square law is important to consider in situations where sound intensity needs to be measured or controlled. For example, in designing a concert hall, engineers need to take into account the inverse square law to ensure that sound is evenly distributed throughout the space. Similarly, in industrial settings where workers are exposed to high levels of noise, the inverse square law is important for calculating the required distance between workers and machinery to reduce the risk of hearing damage.
In conclusion, the inverse square law explains the relationship between distance and sound intensity, stating that the intensity of sound varies inversely with the square of its distance. Understanding this law is crucial in designing spaces or machinery that produce sound, as well as in protecting workers from the harmful effects of noise.

To know more about inverse square law visit:

https://brainly.com/question/30562749

#SPJ11

The value of y that gives an angle of 30 degrees between u and v is approximately 4.14.

The angle between two vectors u and v is given by the formula:

cosθ = (u . v) / (|u| |v|)

where u.v is the dot product of u and v, and |u| and |v| are the magnitudes of u and v, respectively.

In this case, we have:

u = i + 4j

v = 5i + yj

The dot product of u and v is:

u.v = (i)(5i) + (4j)(yj) = 5i^2 + 4y^2

The magnitude of u is:

|u| = sqrt(i^2 + 4j^2) = sqrt(1 + 16) = sqrt(17)

The magnitude of v is:

|v| = sqrt((5i)^2 + (yj)^2) = sqrt(25 + y^2)

Substituting these values into the formula for the cosine of the angle, we get:

cosθ = (5i^2 + 4y^2) / (sqrt(17) sqrt(25 + y^2))

Setting cosθ to 1/2 (since we want the angle to be 30 degrees), we get:

1/2 = (5i^2 + 4y^2) / (sqrt(17) sqrt(25 + y^2))

Simplifying this equation, we get:

4y^2 - 25 = -y^2 sqrt(17)

Squaring both sides and simplifying, we get:

y^4 - 34y^2 + 625 = 0

This is a quadratic equation in y^2. Solving for y^2 using the quadratic formula, we get:

y^2 = (34 ± sqrt(1156 - 2500)) / 2

y^2 = (34 ± sqrt(134)) / 2

y^2 ≈ 16.85 or 17.15

Since y must be positive, we take y^2 ≈ 17.15, which gives:

y ≈ 4.14

Therefore, the value of y that gives an angle of 30 degrees between u and v is approximately 4.14.

Learn more about angle here

https://brainly.com/question/1309590

#SPJ11

The mean duration of one renewal interval in the given two-state Markov chain is 1/b.

In the given transition probability matrix, the probability of transitioning from state 1 to state 0 is represented by the element b. Since the process begins in state X₀ = 0, the first transition from state 1 to state 0 starts a renewal interval.

To calculate the mean duration of one renewal interval, we need to find the expected number of transitions from state 1 to state 0 before returning to state 1. This can be represented by the reciprocal of the transition probability from state 1 to state 0, denoted as 1/b.

Learn more about probability here:

https://brainly.com/question/31120123

#SPJ11

Our approximation for f′(9.1) is -23.8.

To approximate f′(9.1) using the given information, we can use the formula for the slope of a secant line between two points on a function:

f′(9.1) ≈ (f(9.6) - f(9.1)) / (9.6 - 9.1)

Substituting in the values given, we get:

f′(9.1) ≈ (-6.4 - 5.5) / (9.6 - 9.1)
f′(9.1) ≈ -11.9 / 0.5
f′(9.1) ≈ -23.8

This represents the average rate of change of the function f(x) between x = 9.1 and x = 9.6. However, it's important to note that this is only an approximation, and the true instantaneous rate of change (i.e. the derivative) may be slightly different at x = 9.1.

To get a more accurate estimate, we would need to calculate the limit of the above formula as h approaches 0.

To learn more about : approximation

https://brainly.com/question/201331

#SPJ11

The first derivative:

f′(9.1) ≈ (f(9.6) - f(9.1)) / (9.6 - 9.1) = (-6.4 - 5.5) / (0.5) = -11.9 / 0.5 = -23.8

The derivative of a variable's function at the selected value, if any, is the slope of the tangent to the function's graph at that point. The tangent is the function's best linear approximation around the input value. For this reason, the derivative is often defined as the "instantaneous rate of change", that is, the ratio of the instantaneous change of the variable to the instantaneous change of the independent variable.

Using the formula for approximating f′(x), we have:
Given that f(9.1) = 5.5 and f(9.6) = -6.4, we can approximate f′(9.1) using the average rate of change formula:

f′(9.1) ≈ [f(9.6) - f(9.1)] / [9.6 - 9.1]
       ≈ [(-6.4) - 5.5] / 0.5
       ≈ -23.8

Therefore, approximate f′(9.1) is -23.8.

Learn more about Derivative:

brainly.com/question/25324584

#SPJ11