1. Which of the following statements about the properties of elements related to an
atomic emission spectrum are true? Select all that apply. (3 are correct)
Answers
The emission spectrum of an atom consists of limited lines that are unique to a given element.
According to the Bohr model of the atom, energy is absorbed or emitted when an atom moves from one energy level to another. Since energy is quantized, the spectrum of atoms often consists of single lines.
Hence, the true statement about atomic spectrum is that; "the light that an element emits is made up of a limited number of narrow lines that produce a unique pattern or atomic emissions spectrum for that element."
Learn more about atomic spectrum: https://brainly.com/question/2049494
Related Questions
Some tomato ketchup accidentally got onto a piece of white fabric. Your mother suggested that lemon juice, baking soda, or vinegar would be good for removing the tomato stain. Plan and design an experiment that can be used to investigate which of the three substances is most effective in removing the tomato stain.
1. Write a hypothesis for your investigation
2. Identify the dependent, independent, and controlled variables.
3. Outline a proposed method for the experiment you would conduct.
4. What data would be collected? Suggest a suitable way(s) for recording your data.
5. Identify ONE (1) possible source of error and ONE (1) precaution.
Please if you see this help me answer these questions.
Answers
Answer:
3... uhm I'm not sure it could 2
Question 13 (2 points)
Given the following images, choose the one that most likely represents an M-class star. (2 points)
A
B
с
D
Оа
A
Oь в
Ос
О с с
Od D
Answers
Answer:
b. because its Rigel star
Explanation:
hope itsattachments
according to iupac nomeclature rules which set of chemical name and formula for the same compound is correct?
Answers
Answer:
stock and traditional
Explanation:
the iupac says so
How might a firefighter use chemistry?
A. Chemistry can help a firefighter plan an escape route through a
burning building
B. Chemistry can help a firefighter understand combustion and how
to put out fires.
C. Chemistry can help a firefighter understand how much of a load
the floors of a burning building can hold,
D. Chemistry can help a firefighter plan an exercise routine to prepare
for fires
Answers
Answer:
me has answer
Explanation:
b
What is the purpose of an indicator in a titration.
Answers
Answer:
The role of indicator in titration is to detect the endpoint of the titration. When the colour of the solution changes, it indicates that the concentration of the chemical specie has reached a critical range. This change in colour is possible with the help of indicators.
Explanation:
hope it helps
#carry on learning and keep safe
correct me if I'm wrong and if correct brainliest me please
I hop this helps! :)
(01.07 HC)
A student collected the data shown in the table below during an experiment.
Liquid Characteristics
Liquid Characteristics
Boiling Point Freezing Point Color Expansion per Degree Change in Temperature
Mercury 357 °C −39 °C shiny silver gray relatively lower
Alcohol 78 °C −115 °C colorless relatively higher
Based on the data, which of the following conclusions can be made about the use of mercury and alcohol thermometers?
A mercury thermometer can measure the freezing point of a liquid that freezes at −80 °C.
An alcohol thermometer can measure the boiling point of a liquid that boils at 80 °C.
A mercury thermometer is better to measure very small changes in temperature.
An alcohol thermometer is better to measure the boiling points of colorless liquids.
Answers
Answer: a mercury thermometer is better to measure very small changes in temperature
Explanation:
i took the test and got it right
Answer:
the answer is C, a mercury thermometer is better to measure very small changes in temperature.
Explanation:
i just took the test and it was correct :)
pleaseee PLEASEEE PLEASEEE I NEED HELPPP!!
can someone do these for me I will give brainliest
Answers
2. 40atm
3. 627C
Vinegar is an acid. Based on
what you know about the
properties of acids and bases,
which would you expect from
vinegar?
A. It should feel slippery.
B. It will release OH-in water.
C. It will release H+ in water.
Answers
Answer:
C
Explanation:
Acids contain H plus ions. When within a solution or neutralised these ions are released.
The substance which gives H+ ion are called as acid. Vinegar is an acid because it will release H+ in water. Therefore, option C is correct.
What is vinegar ?Acetic acid and water are combined to create vinegar through a two-step fermentation process. First, yeast consume any liquid derived from a plant source, such as fruits, whole grains, potatoes, or rice, and feed on the sugar or starch therein. It ferments into alcohol.
White vinegar typically contains 93–96% water and 4-7% acetic acid. It can be used to cook, bake, clean, and control weeds. It may also help with weight loss and decrease cholesterol and blood sugar levels.
The sugar is converted to ethanol (ethyl alcohol) by yeast and bacteria in a two-step fermentation process, which is followed by the production of acetic acid. Vinegar is acidic because it contains acetic acid.
Thus, option C is correct.
To learn more about vinegar, follow the link;
https://brainly.com/question/4239583
#SPJ2
HOW DO THE FOLLOWING COMPARE IN THE AMOUNT OF ALCOHOL THEY CONTAIN: 12 OZ. BEER(5% ALCOHOL), 12 OZ. WINE COOLER(5% ALCOHOL), 1 1/2 OZ. OF 80 PROOF LIQUOR, 5 OZ. OF WINE(12% ALCOHOL)?
Answers
The amount of alcohol contained in each of the listed beverages can be compared as follows; 1/2 oz of 80 proof liquor > 5 oz of wine (12% alcohol) > 12 oz of wine cooler (5%alcohol) = 12 oz of beer (5%alcohol) .
A drink that contains alcohol must be an intoxicating beverage. The extent of intoxication of an alcoholic beverage depends on the amount of alcohol that the beverage contains. There are various types of alcoholic beverages as listed in the question.
The amount of alcohol contained in each of the listed beverages can be compared as follows; 1/2 oz of 80 proof liquor > 5 oz of wine (12% alcohol) > 12 oz of wine cooler (5%alcohol) = 12 oz of beer (5%alcohol) .
Learn more about alcoholic beverage: https://brainly.com/question/6967136
Identify the total number of molecules in the chemical formula: 6CH4 a 6 b 10 c 24 d 30
Answers
Answer: A.6
Explanation:
The total number of molecules in the chemical formula is 6
What is a molecule?
Molecules are the smallest particle of a substance that has all of the physical and chemical properties of that substance. Molecules are made up of one or more atoms.
The correct form of question will be:-6 molecule of methane CH₄
6CH4
a) 6 c) 10 c) 24 d) 30⇒ Number of aton of carbon is 6
⇒Number of atom of hydrogen is 24
⇒Total number of atom is 30
What is an atom ?
An atom is a particle of matter that neither be created nor be destroyed. An atom consists of a central nucleus that is usually surrounded by one or more electrons. Each electron is negatively charged. The nucleus is positively charged, and contains one or more relatively heavy particles known as protons and neutrons.
Learn more about molecules here: https://brainly.com/question/26044300
#SPJ2
what object has a mass of 10 grams and a volume of 2 mL
Answers
Answer:
Destiny = 5 g/ml
Explanation:
The formula for density is d=
Knowing this, divide your mass by volume:
10 g / 2 ml = 5 g/ml
Final answer:
Destiny = 5 g/ml
What type of reaction takes place when using this enzyme (endergonic or exergonic)?
lactase is the enzyme
Answers
Answer:
we do the best possible in our
5. What is a chemical equation? What are the essentials of a chemical equation? What information is conveyed by a chemical equation? What are its limitations and how are they removed?
Answers
Answer:
A chemical equation is the symbolic representation of a chemical reaction in the form of symbols and formula. (i) It must refer to an actual chemical reaction. (ii) It should be molecular. For example, H, O, N should be written as H2, O2, N2. (iii) It should be balanced and conform to the law of conservation of matter.A chemical equation conveys both qualitative and quantitative information. Qualitatively, a chemical equation tells the names of the various reactants and the products.
How did the atomic model change due to the research of thomson, rutherford, and bohr?
Answers
Answer:
Thomson's plum pudding model of the atom had negatively-charged electrons embedded within a positively-charged "soup." Rutherford's gold foil experiment showed that the atom is mostly empty space with a tiny, dense, positively-charged nucleus. Based on these results, Rutherford proposed the nuclear model of the atom.
which is the correct formula for the compound dinitrogen monoxide?
Answers
Answer: Dinitrogen Monoxide ( also called nitrous oxide )
is an inorganic ( not made from living matter) compound with the chemical formula of N2O.
Explanation:
Read above
Maximum s-character is observed in
a) Triple bonded carbon atom b) Double bonded carbon atom
c) Single bonded carbon atom d) Carbon atom of benzene
Answers
[tex]\huge{\underline{\underline{\boxed{\sf{\purple{ǫᴜᴇsᴛɪᴏɴ}}}}}}[/tex]
Maximum s-character is observed ina) Triple bonded carbon atom b) Double bonded carbon atomc) Single bonded carbon atomd) Carbon atom of benzene[tex]\huge{\underline{\underline{\boxed{\sf{\red{Answer}}}}}}[/tex]
Maximum s-character is observed ina) Triple bonded carbon atomname any two chemical required for preparation of ammonia gas
Answers
Answer:
Ammonium chloride and slacked lime
Explanation:
We can generate ammonia gas in the research centre by slowly heating ammonium chloride (NH4Cl) and slaked lime [Ca(OH)2]. Ammonia gas is lighter than air, requiring its accumulation by the descending displacement of air.
a) how many moles of o2 are needed to burn 1.50 mol of c8h18?
Answers
Answer:
Moles of oxygen needed to burn given amount of octane is 16.875 moles.
Explanation:
how much water will you need to add to your working solution to get to a 100 ml total volume of a 0.03m nacl solution?
Answers
Answer:
The solution is made by adding 4.38 g NaCl to a 250-mL volumetric flask. About 100 mL of water are added and when all the NaCl dissolves water is added up ...
nomenclature of this compound
spammers will be reported
Answers
Answer:
Nomenclature is the process of naming chemical compounds with different names so that they can be easily identified as separate chemicals. ... For example, organic compounds include molecules with carbon rings and/or chains with hydrogen atoms (see picture below).01-Jul-2014
Nomenclature: Iron (II) Chloride
Compound: FeCl2
Which statement does NOT describe subduction zones?
A.
Earthquakes and volcanoes occur at these boundaries.
B.
Old crust is recycled into Earth's mantle.
C.
Volcanic mountains can form at these boundaries.
D.
New crust forms by seafloor spreading
Answers
Which elements are the most reactive and why?
Answers
Answer:
Fluorine is identified as the most reactive nonmetal and the most electro-negative element in the periodic table, making it the strongest oxidizing agent. Caesium is the most reactive metal in the periodic table, so much that working with this metal often ends in explosions!
Hydrogen is a very reactive gas, and the alkali metals are even more reactive. In fact, they are the most reactive metals and, along with the elements in group 17, are the most reactive of all elements.
Hope that helps.
Melting gold with other metals makes 10-karat gold. Which term best describes 10-karat gold?
homogeneous mixture
compound
heterogeneous mixture
pure substance
Answers
Answer: a
Explanation:
Gold is known to be an element. The term that best describes 10-karat gold is that it is an homogeneous mixture.
Gold as an element of often has an ideal state of purity where there contains nothing but gold atoms.
A heterogeneous mixture is known to be a mixture that cannot be chemically sound everytime. Gold jewelry is known to be a homogeneous mixture as it is always will look good and remain unchanged for a long time.
As good example of homogeneous products, e.g a 1-kilogram 24-karat gold bar has unique properties.
Learn more about Gold from
https://brainly.com/question/11083304
What is a net ionic equation?
Answers
why does hydrogen fluoride have a high boiling point
Answers
The intermolecular bonding for HF is van der Waals, whereas for HCL, the intermolecular bonding is hydrogen. Since the van der Waals bond is stronger than hydrogen, HF will have a higher boiling temperature. Since the covalent bond is stronger than van der Waals, HF will have a higher boiling temperature.
What percentage of the Periodic Table of Elements is Metals?
Answers
80 percent
About 80 percent of the elements are metals (shiny elements that conduct heat and electricity well), and 15 percent of the elements are nonmetals (poor conductors of heat and electricity). The remaining elements are metalloids, which share properties of both metals and nonmetals.
Answer:
80% of the Periodic Table consists of metals and 15% non-metals and 5% other elements.
Explanation:
PLZ HELP?! 50 points
Write the correct IUPAC name for the following compound
Answers
Answer:
2-ethly-3-5 dimethylheptam
Explanation:
trust meeeeee
what species has an atom with an oxidation number of 3
Answers
Which two elements have more protons per atom than phosphorus?
Answers
Answer:
nitrogen have more protons per atom than phosphorus
Oxygen and fluorine are the two elements that have more protons per atom than the element phosphorus.
What is phosphorus?Phosphorus (P), a nonmetallic chemical element of something like the nitrogen group (Group 15 [Va] of the periodic table), is a colorless, semitransparent, soft, sticky solid that glows in the dark at room temperature.
Hennig Brand, a German businessman with an interest in alchemy, appears to have discovered phosphorus around 1669. Brand left 50 buckets of pee alone till they putrified and "produced worms." He then reduced the urine to a paste and burned it with sand to extract elemental phosphorus first from combination. Oxygen and fluorine are the two elements that have more protons per atom than phosphorus.
Therefore, oxygen and fluorine are the two elements that have more protons per atom than phosphorus.
To learn more about phosphorus, here:
https://brainly.com/question/29789850
#SPJ6
rank the crystal lattice structures in order of decreasing efficiency of space in the structure.
Answers
Rank the crystal lattice structures in order of decreasing efficiency of space in the structure.
1. Simple cubic
2. Body centered cubic
3. Face centered cubic
4. Hexegonal close packed