Answer:
10. it increases the boiling point because it is a stone bond and will require much energy to break it.
11.So, to boil liquid water, all hydrogen bonds have to be broken and it requires a large amount of energy. This isn't the case in HF; all hydrogen bonds need not to be broken, and therefore a lesser amount of energy is required. So HF boils at a much lower temperature as compared to water even though F has high electronegativity but the force of attraction or the intermolecular is is weak
can you balance 12 blocks on the 3x2 platform
How much heat is produced by the combustion of 125 g of acetylene (C2H2)?
C2H2(g) +
202(8)
2C02(8) + H2O(1)
AH = -1301.1 kJ/mol
The amount of heat produced when 125 g of acetylene C₂H₂ combust in air is –6255.3 KJ
Balanced equationC₂H₂ + 5/2O₂ —> 2CO₂ + H₂O ΔH = –1301.1 KJ/mol
From the balanced equation above,
1 mole of C₂H₂ releases –1301.1 KJ of heat energy
But
1 mole of C₂H₂ = (2×12) + (1×2) = 26 g
Thus,
26 g of C₂H₂ releases –1301.1 KJ of heat energy
How to determine the heat released by 125 g of C₂H₂From the balanced equation above,
26 g of C₂H₂ releases –1301.1 KJ of heat energy
Therefore,
125 g of C₂H₂ will release = (125 × –1301.1) / 26 = –6255.3 KJ of heat energy
Thus, –6255.3 KJ of heat energy were produced from the reaction.
Learn more enthalpy change:
https://brainly.com/question/11967318
A sample of sodium hydroxide (naoh) has a mass of 160.0 g. the molar mass of naoh is 40.00 g/mol. how many moles of naoh does this sample contain? 4.000 moles 40.00 moles 160.0 moles 6,400 moles
The number of moles the sample of sodium hydroxide (NaOH) will contain is 4 moles.
How we calculate moles?Moles of any substance will be calculated by using the below formula:
n = W/M, where
W = given mass
M = molar mass
Given mass of NaOH = 160 g
Given molar mass of NaOH = 40 g/mole
On putting these values on the above equation, we get
n = 160 / 40 = 4 moles
Hence, required moles is 4 moles.
To know more about moles, visit the below link:
https://brainly.com/question/15303663
Answer:
A). 4.000
Explanation:
Poopy fart fart
The number of joules needed to raise the temperature of 100 grams of water by 10°C is the same as the number of joules needed to raise the temperature of 1,000 grams of water by what? Hint: Look at ratios – you don't need to do the q = m•Cp•Δt calculation!
Answer:
1°C
Explanation:
We know that the heat required to raise the temperature is given by :
[tex]Q=mc\Delta T[/tex]
m is mass
c is specific heat
[tex]\Delta T[/tex] is the change in temperature
ATQ,
[tex]m_1c\Delta T_1=m_2c\Delta T_2\\\\m_1\Delta T_1=m_2\Delta T_2\\\\\dfrac{100}{1000}=\dfrac{\Delta T_2}{10^{\circ}}\\\\\Delta T_2=1^{\circ}C[/tex]
Hence, the required temperature is 1°C.
hello people ~
What happens when lead nitrate reacts with potassium iodide?
(a) They will not react
(b) Large amount of hydrogen release
(c) Yellow ppt of lead iodide and potassium nitrate will be produced
(d) Evolution of gas will occur
Answer:
Option C
Explanation:
The reaction is given by
[tex]\\ \rm\rightarrowtail {Pb(NO_3)_2\atop Lead\:nitrate}+{KI\atop Potassium\:iodide}\longrightarrow {KNO_3\atop Potassium\:nitrate}+{PbI_2\atop Lead\:Iodide}[/tex]
This is a double Displacement reaction
Which statement describes a difference between transcription in eukaryotic and prokaryotic cells?
In eukaryotes, transcription occurs simultaneously with translation, while transcription in prokaryotes must complete before translation can begin..
In eukaryotes, transcription produces a monocistronic RNA, while transcription in prokaryotes produces a polycistronic RNA.
In eukaryotes, transcription produces an RNA molecule, while transcription in prokaryotes produces a DNA molecule.
In eukaryotes, transcription produces an DNA molecule, while transcription in prokaryotes produces a RNA molecule.
In eukaryotes, transcription is completed by an RNA polymerase, while transcription in prokaryotes is completed with a DNA polymerase.
Answer:
Which statement describes a difference between transcription in eukaryotic and prokaryotic cells?
In eukaryotes, transcription occurs simultaneously with translation, while transcription in prokaryotes must complete before translation can begin..
In eukaryotes, transcription produces a monocistronic RNA, while transcription in prokaryotes produces a polycistronic RNA.
In eukaryotes, transcription produces an RNA molecule, while transcription in prokaryotes produces a DNA molecule.
In eukaryotes, transcription produces an DNA molecule, while transcription in prokaryotes produces a RNA molecule.
In eukaryotes, transcription is completed by an RNA polymerase, while transcription in prokaryotes is completed with a DNA polymerase.
I need help pls help me I’m stuck
Answer:
True
Explanation:
All living things are made from many cells
Answer:
[tex]\huge\boxed{True}[/tex]
Explanation:
All living things are composed of cells which are the basic building blocks of living things.
Cell => Tissue => Organ => Organ System => Organism
So, Cell is the "basic" unit of living organism without which living things cannot be mage or cannot function.
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AnonymousHelper1807Consider the chemical equation in equilibrium. A(g) 2B(g) Double headed arrow. C(g) D(g) heat What will happen to the equilibrium of this reaction if the temperature is increased? It will shift to the left because heat is released. It will shift to the left because heat is absorbed. It will shift to the right because heat is released. It will shift to the right because heat is absorbed.
If the temperature is increased then reaction will shift to the left because heat is absorbed.
What is equilibrium state?Equilibrium of any reaction is that state in which concentration of reactant and concentration of product will be constant.
Given chemical reaction is:
A(g) + 2B(g) ⇄ C(g) + D(g)
From the equilibrium state reaction will move only that side which will contribute to maintain the stable state. In the forward reaction heat is released as mention in the question. So, when the temperature of reaction is increased then it shifts towards the left side by absorbing the heat and maintain the stability.
Hence, option (2) is correct, i.e. It will shift to the left because heat is absorbed.
To know more about equilibrium, visit the below link:
https://brainly.com/question/14297698
Answer:
B. It will shift to the left because heat is absorbed.
Explanation:
Correct on Edge 2022!!!
Good luck everyone, you got this! Have a great day!
Why is the center of the galaxy only visible in radio waves?
Answer:
its to far to be seen with a telescope and it would take over 10 billion light yrs to travel there
Explanation:
What happens to temperature as a substance melts and heat energy is used to break the connections between molecules, until all melting is complete?.
What happens to temperature as a substance melts and heat energy is used to break the connections between molecules, until all melting is complete?.
Answer : Stays the same
Solid zinc and aqueous lead (II) nitrate react to from aqueous zinc (II) nitrate and solid lead.
Zn(s) + Pb(NO₃)₂ (aq) → Zn(NO₃)₃ (aq) + Pb (s)
Further explanationThere are two types of chemical reactions that may occur.
single-replacement reactions and double-replacement reactions.
A single replacement reaction is a chemical reaction in which one element replaces the other elements of a compound to produce new elements and compounds
A + BC ⇒ AC + B
Not all of these reactions can occur. We can use the activity series, which is a list of elements that can replace other elements below / to the right of them in a single replacement reaction.
This series is better known as the Volta series, where the metal element with a more negative electrode potential is on the left, while the element with a more positive electrode potential on the right.
The more left the position of a metal in the series, the more reactive metal (easy to release electrons)
Generally, the Volta series used is
Li K Ba Sr Ca Na Mg Al Mn Zn Cr Fe Cd Co Ni Sn Pb H Sb Bi Cu Hg Ag Pt Au
Solid zinc and aqueous lead (II) nitrate react to from aqueous zinc (II) nitrate and solid lead.
Can be expressed in chemical equations :
Zinc + aqueous lead (II) nitrate ⇒aqueous zinc nitrate + lead metal
Zn(s) + Pb(NO₃)₂ (aq) → Zn(NO₃)₃ (aq) + Pb (s)
Reactants : Zn and Pb(NO₃)₂
Products : Zn(NO₃)₃ and Pb
The existing Zinc element can replace the Lead element, which is on the right side of Zn, so the reaction will occur.
Does anyone know this answer ?
Answer:
sorry I can't able to help you
Explanation:
[tex]hii[/tex]
have a nice day ✌️✌️
What is the defenition of protons?
Answer:
It's basically a positive charged atom.
Explanation:
An isotope has a half-life of 2 days. How much will be left after 6 days?
O 1/6
O 1/2
O 1/8
O 1/4
Fe + Cl2 → FeCl3, what coefficients would balance the equation?
3,2,2
1,1,1
2,3,2
4,2,2
The coefficients that will balance the equation will be 2,3,2.
Balancing chemical equationFor a balanced equation, the number of atoms of each element on the reactant side must be equal to those of the product side.
Thus, the balanced equation of the reaction will be:
2Fe + 3Cl2 → 2FeCl3
Consequently, the coefficients of the balanced equation are 2,3,2.
More on balancing chemical equations can be found here: https://brainly.com/question/8062886
A student is studying a sample of carbon dioxide gas inside a small syringe. At constant temperature the syringe has a volume of 89. 6 ml at a pressure of 3. 00 atm. When the syringed is expanded to a volume of 215 ml, what is the new pressure inside the syringe?.
The new pressure inside the syringe will be 1.25 atm
Gas lawAt constant temperatures, the volume of a gas is inversely proportional to its pressure.
Thus: P1V1 = P2V2
In this case, P1 = 3.0 atm, V1 = 89.6 mL, V2 = 215 mL
P2 = P1V1/V2
= 3 x 89.6/215
= 1.25 atm
More on gas laws can be found here: https://brainly.com/question/1190311
Please help me with this chemistry work !!!!!
Answer:
1. Mn
2. Se
3. Al
4. Na
5. Ca
6. IE
7. Mg
8. Sb
9. Sn
10. H
Explanation:
BER:
Which of the following predictions about global climate change is directly related to an increase in the burning of fossil
fuels?
a. increased extreme weather
b. decreased food supply
c. global warming
d. falling sea levels
oo
How is temperature related to the physical change of a
substance?
Answer:
Physical conditions like temperature and pressure affect state of matter. ... When thermal energy is added to a substance, its temperature increases, which can change its state from solid to liquid (melting), liquid to gas (vaporization), or solid to gas (sublimation)
Answer:
Temperature is a measure of the kinetic energy of particles in a substance. As temperature increases, the atoms or molecules in a substance gain energy. As temperature decreases, the particles lose energy. A change in the energy of particles causes a change in their arrangement. A change in the arrangement of particles can lead to a physical change.
Explanation:
on edge 2021
The property of matter that resists changes in motion is called?
Answer:
Inertia.
Explanation:
Its inertia it slows down objects with out it we would fly away.
(25 POINTS) How does sediment size around a river affect erosion?
Answer: It can affect the shape of sediment because it is scraping very slowly against it causing it to change,
Explanation:
What would happen if sodium and potassium are placed in hot water?
1.
Which weather pattern can drop torrential amounts of rain, create storm surges, and destroy structures with high winds?
drought
tornado
hurricane
thunderstorm
2.
What is the main energy source for a hurricane?
winds blowing from high pressure to low pressure
warm air masses
cool ocean water
warm ocean water
3.
What makes the weather inside the eye of the storm calm and clear?
high pressure air
low pressure air
clockwise rotation
counterclockwise rotation
I will mark brainliest.
*These three questions are strictly for study.
1) Hurricane
A hurricane can cause destruction at a high scale2) winds blowing from high pressure to low pressure
when the clouds take up the hot vapours , making the atmosphere warm ,the pressure increases resulting in formation of wind and when these winds wind up to make a huge pattern which we call hurricane3) Clock wise rotation
The clockwise rotation moving a same direction helps to make the eye visible to usHow is the burning candle similar to a living organism?
Answer:
it responds to fire because the fire is something called the stimulus which forces the wax on the candle to melt.
What's the correct IUPAC name of the structure shown?
A. Methylhexene
B. 4-methylhex-1-ene
C. Hex-1-ene
D. 3-methylhex-5-ene
Answer:
B. 4-methylhex-1-ene
Explanation:
There are 6 carbons for the main molecule of 1-hexene. They are counted from the first (1) on the terminal C with the double bond (ene). A methyl group is hanging on carbon number 4, so it is the 4-methyl.
4-methylhex-1-ene.
What is a single celled organism able to do?
differentiate
grow to large sizes
make tissues
survive on its own
Answer:
he or she is right
make tissues is the answer
Explanation:
hope this helps :)
I’m marking BRAINLIEST for whoever answers first. and this is science.
Answer:
The right answer is electrons :)
Answer:
Magnetism is caused by the motion of:
Option 3, electrons.
Explanation:
Because every substance is made up of these tiny units called atoms. And each atom has electrons, particles that carry electric charges.
Hope this helps you out!
compressed springs and stretch rubber bands store ______ energy
Answer:
elastic potential energy
Explanation:
Elastic potential energy is the energy stored in elastic materials as the result of their stretching or compressing.
The chemical equation below shows the reaction between carbon dioxide (CO2) and lithium hydroxide (LiOH). CO2 2LiOH Right arrow. Li2CO3 H2O The molar mass CO2 is 44. 01 g/mol. How many moles of LiOH are needed to react completely with 25. 5 g of CO2? 0. 290 moles 0. 579 moles 1. 16 moles 1. 73 moles.
Answer:
C
Explanation:
The reaction between carbon dioxide and lithium hydroxide can be represented by the equation:
[tex]\displaystyle \text{CO$_2$} + 2\text{LiOH} \longrightarrow \text{Li$_2$CO$_3$}+ \text{H$_2$O}[/tex]
We want to determine the amount of moles of LiOH needed to react completely with 25.5 g of CO₂.
Determine the number of moles of CO₂ in 25.5 g of CO₂:
[tex]\displaystyle 25.5\text{ g CO$_2$} \cdot \frac{1\text{ mol CO$_2$}}{44.01\text{ g CO$_2$}} = 0.579\text{ mol CO$_2$}[/tex]
Use stoichiometry to determine the amount of LiOH necessary. CO₂ and LiOH are in a 1:2 ratio. That is, for every one mole of CO₂ that reacts, two moles of LiOH must also react.
[tex]\displaystyle 0.579\text{ mol CO$_2$} \cdot \frac{2\text{ mol LiOH}}{1\text{ mol CO$_2$}} = 1.16\text{ mol LiOH}[/tex]
In conclusion, our answer is C.
17. True or False: Proximal means farther away from the point of attachment of the limb. *
(1 Point)
True
False