According to stoichiometry and STP conditions ,1785.90 liters of hydrogen is produced.
What is stoichiometry?It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.
In the given reaction as per stoichiometry, 149.84 g of As produces 6 g hydrogen , thus, 39.3 g of As will produce 39.3×6/149.84=1.573 g.
As per STP conditions, V=1.573/2×8.314×273/1=1785.90 liters.
Thus, 1785.90 liters of hydrogen is produced.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ1
1. Assertion:Amobea is unicellular organism and has no organs for
breathing.
R: Respiration of amobea is by diffusion.
Answer:
Amoeba has no special respiratory organs and no respiratory pigments but there is a free exchange of gases by diffusion through the general body surface which is permeable to the gases dissolved in water
How many bonds could each of the following chelating ligands form with a metal ion?
a. acetylacetone(acacH)
b. dirthylenetriamine
c. Salen
d. porphine
a. Acetylacetone(acacH) can form up to 4 bonds with a metal ion.
b. Dirthylenetriamine can form up to 4 bonds with a metal ion.
c. Salen can form up to 6 bonds with a metal ion.
d. Porphine can form up to 8 bonds with a metal ion.
If the element gallium has an atomic number of 31 and an atomic mass of 70, how many neutrons does it have
diatomic elements are important. what makes them different from other elemental substances?
Diatomic elements are important because they make up a significant portion of the Earth's atmosphere and are crucial for many biological and chemical processes.
Diatomic elements are elements that exist in nature as molecules made up of two atoms of the same element, such as H2, O2, N2, and F2.
A diatomic atom is one that cannot exist on its own. There are no single O atoms floating around in the sky. Because O atoms must exist in pairs, oxygen occurs as O2. These atoms are too unstable to live on their own.
This elements are different from other elemental substances because they are composed of multiple atoms of the same element, rather than a single atom or a mixture of different elements.
Learn more about diatomic elements here:https://brainly.com/question/23162019
#SPJ4
Sodium chloride reacts with silver nitrate. Type of reaction ______________________________ Balance chemical equation:
Sodium chloride reacts with silver nitrate. NaCl + AgNO3 → AgCl + NaNO3
intermolecular forces present in it.
The attracting and repellent forces that develop between the molecules of a substance are known as intermolecular forces or IMF for short. Individual molecules of a substance interact with one another through the mediation of these forces.
Most of the physical and chemical features of matter are caused by intermolecular forces.
An intermolecular force is an attractive force that develops between the protons or positive parts of one molecule and the electrons or negative parts of another molecule. This force affects a substance's many physical and chemical properties. The strength of a material's intermolecular forces directly relates to the boiling point of that substance; the stronger the intermolecular forces, the higher the boiling point.
Learn more about Intermolecular forces here:
https://brainly.com/question/9007693
#SPJ4
Calculate each of the following quantities:
A. Volume (ml) of 2.25 M potassium hydroxide that contains 15.0 g of solute enter a 3 significant figure number
B. molarity of 250. ml of solution containing 1.25 moles of glucose
C. volume (ml) of 10.00 M copper(II) nitrate that must be diluted with water to prepare 750.0 ml of a 2.500 M solution (enter to 4 significant figures)
D. Are the following instructions for diluting a 10.0 M solution to a 1.00 M solution correct: "Take 100.0 mL of the 10.0 M solution and add 900.0 mL water"? enter either true or false
(A) Vol. of solvent is 119.8 ml, (B) Molarity (M) of sol. is 5.00 M, (C) V1 of copper nitrate solution is 187.5 ml, (D) The instruction given is false.
(A). To calculate the volume (ml) of a 2.25 M potassium hydroxide solution that contains 15.0 g of solute, we can use the formula:
The unit of measurement for molarity (M) is moles of solute per liter of solvent.
Rearranging the formula to solve for liters of solvent:
Molecularity = moles of solute / liters of solvent (M)
We know that the molar mass of potassium hydroxide (KOH) is 56.1 g/mol. To find the moles of solute, we can divide the given mass (15.0 g) by the molar mass of KOH:
15.0 g / 56.1 g/mol = 0.2679 moles
Now we can plug this value into the formula above:
Liters of solvent = 0.2679 moles / 2.25 M
Liters of solvent = 0.1198 L or 119.8 ml (rounded to 3 significant figures)
(B). To calculate the molarity of a solution containing 1.25 moles of glucose in 250. ml of solvent, we can use the formula:
The unit of measurement for molarity (M) is moles of solute per liter of solvent.
Plugging in the given values:
Molarity (M) = 1.25 moles / 0.250 L
Molarity (M) = 5.00 M
(C). To calculate the volume of a 10.00 M copper(II) nitrate solution that must be added to water to prepare 750.0 ml of a 2.500 M solution, we can use the formula:
M1V1 = M2V2
Where M1 and V1 are the concentration and volume of the original solution, and M2 and V2 are the concentration and volume of the final solution.
We know that the final solution has a volume of 750.0 ml and a concentration of 2.500 M, so we can plug in these values for V2 and M2:
M1V1 = 2.500 M x 750.0 ml
Now we can solve for V1 (the original volume) by rearranging the formula:
V1 = M2V2 / M1
V1 = (2.500 M x 750.0 ml) / 10.00 M
V1 = 187.5 ml (rounded to 4 significant figures)
(D). The instructions "Take 100.0 mL of the 10.0 M solution and add 900.0 mL water" are not correct for diluting a 10.0 M solution to a 1.00 M solution.
To achieve this dilution, you would need to take a smaller volume of the 10.0 M solution and add a larger volume of water, because the final volume should be larger than the starting volume.
For example, you could take 10.0 mL of the 10.0 M solution and add 90.0 mL of water, which would give you a final volume of 100.0 mL and a concentration of 1.00 M. The instruction given above is false.
To know more about molarity please refer: https://brainly.com/question/8732513
#SPJ4
The activation energy of a first order reaction is 83. 5kJ/mol. The rate constant is 3. 54x10^-5s^-1 at 45 C. What is the rate constant at 65 C?
The rate constant at 65 C is k65= 4.8 x 10^-5 s^-1 .Below is the explanation for the answer
To find the rate constant at a different temperature, you can use the Arrhenius equation, which relates the rate constant to the activation energy and the temperature. The equation is:
k = A * e^(-Ea/RT)
where
k is the rate constant,
A is the pre-exponential factor (also known as the frequency factor),
Ea is the activation energy,
R is the universal gas constant,
T is the absolute temperature.
We are given that the activation energy is 83.5 kJ/mol and the rate constant at 45 C is 3.54 x 10^-5 s^-1. To find the rate constant at 65 C, we can substitute these values into the equation and solve for k.
k = A * e^(-Ea/RT)
k = 3.54 x 10^-5 s^-1 * e^(-(83.5 kJ/mol) / (8.314 J/mol*K * (45 + 273.15 K))
However, A is a constant that we don't know. To find the rate constant at 65 C, we can use the fact that the rate constant is proportional to the temperature. Therefore, we can find the ratio of the rate constants at 65 C and 45 C, then multiply it by the rate constant at 45 C to find the rate constant at 65 C.
k65/k45 = (T2/T1)^n
where
k65 is the rate constant at 65 C
k45 is the rate constant at 45 C
T2 is the temperature in Kelvin (65 + 273.15)
T1 is the temperature in Kelvin (45 + 273.15)
n is the order of the reaction, which is 1 in this case
we can find the rate constant at 65 C is:
k65 = k45 (T2/T1)^n
k65 = 3.54 x 10^-5 s^-1 * ( (65 + 273.15) / (45 + 273.15) )^1
k65= 4.8 x 10^-5 s^-1
Learn more about Rate Constant here: brainly.com/question/14977272
#SPJ4
A balloon of hydrogen is subjected to vacuum. The initial pressure and volume of hydrogen is 0. 95 atm and 0. 55 L. Calculate the final pressure if the final volume is 1. 22 L?
The final pressure if the final volume is 1. 22 L will be 0.4234 atm
To calculate the final pressure of the hydrogen in the balloon if the final volume is 1.22 L, the ideal gas law can be used. The ideal gas law states that PV = NRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature.
Since the number of moles and the temperature is not given, we can assume that they remain constant. So we can use the equation PV = k, where k is a constant.
Given the initial pressure and volume of the hydrogen are 0.95 atm and 0.55 L respectively.
0.95*0.55 = k
so k = 0.5175
then the final pressure can be calculated by:
P1V1 = P2V2
0.950.55 = P21.22
P2 = (0.5175) / (1.22) = 0.4234 atm
The final pressure of the hydrogen in the balloon will be 0.4234 atm.
Learn more about the effect of changing the volume of a gas on its pressure here: https://brainly.com/question/27704299
#SPJ4
draw a diagram of the structure of the following atoms and state their electron arrangement:
(i) Mg
(ii)Ca
The diagrams of the arrangement of the electrons in calcium and magnesium have been shown in the image attached to this answer. There are two electrons in the valence shell of calcium.
How are the electrons arranged?We know that the electrons are the subatomic particles that we can be able to see in the shells of the atom. It is important that we ought to know that the electrons are the particles that are known to be responsible for the reactivity of the atom.
The number of the electrons that we can find in the atom would depend on the number of the protons that we have in the nucleus of the atom and this is because for the atom to be electrically neutral then we would have to have the same number of electrons and protons being in the atom as we know.
It is clear that calcium is a member of group two of the periodic table and that magnesium is also a member of group two of the periodic table.
The structures for calcium would have Ca and two dots while that of magnesium would have Mg and two dots.
Learn more about periodic table:https://brainly.com/question/11155928
#SPJ1
energy transfer wet table information??
The energy is produced due to the process of beak down in the chemical process or reaction.
What is energy transfer and how can energy transfer?
That energy is stored in the bonds of the chemical compounds which include molecules and atoms. The point is released in the chemical reaction and the most power produces heat as a by-product, known as an exothermic reaction.
Energy may be released in a chemical reaction in the form of heat; that reaction is called exothermic. Reactions that require an input of heat to proceed may store some of that energy as chemical energy in newly formed bonds.
So we can conclude that Energy defined as the capacity to supply heat or do work is known as energy.
Learn more about Energy here: https://brainly.com/question/13881533
#SPJ1
Classify each amino acid according to whether its side chain is predominantly protonated or deprotonated at a pH of 7. 40. The p K a values of the Asp, His, and Lys side chains are 3. 65 , 6. 00 , and 10. 53 , respectively
His and Lys are deprotonated but Asp will be protonated.
What is amino acids?Organic substances that possess both amino and carboxylic acid functional groups are known as amino acids. Although hundreds of amino acids occur in nature, the alpha-amino acids that constitute proteins are by far the most significant. The genetic coding contains only 22 alpha amino acids. Amino acids are chemicals that make proteins when they combine. The building blocks of life are amino acids and proteins. Amino acids are left over after proteins are digested or broken down. To support the body, the human body utilizes amino acids to build proteins: Food should be broken down.
Here,
As the pH is given as 7.4 and pK of His is given as 6.00. There will occur a positive charge on His when it's pH < pK therefore, it is neutral at the given pH.
As the pK value of Lys is 10.53 that is greater than the pH of 7.40. Therefore, charge on Lys is positive.
As the pK value of Asp is 3.65 which is less than the pH value of 7.40. Hence, Asp has a negative charge.
Therefore, we can conclude that His and Lys are deprotonated but Asp will be protonated.
To know more about amino acid,
https://brainly.com/question/16832236
#SPJ4
For your new candle-making business, you need to purchase a large amount of a unique scented wax. You plan to charge $9. 95 per large candle. The wax you need is availbale form a U. S. Supplier for $25. 53/1b and also from a German supplier for €11. 90/kg. The current exchange rate is $1=€0. 76 and 1 kg=2. 20 lb
What is the price of the wax from the U. S. Supplier in €/kg?
What is the price of the wax from the German supplier in $/lb
The price of the wax from the U.S. supplier in €/kg would be: €25.53 / 2.20 lb = €11.67/kg.
The price of the wax from the German supplier in $/lb would be $11.90 / 0.76 = $15.68/lb.
This price is calculated by taking the cost of the wax in US dollars and converting it to Euros using the current exchange rate of $1 = €0.76.
This price is calculated by taking the cost of the wax in Euros and converting it to US dollars using the current exchange rate of $1 = €0.76. It's important to note that the price of the wax from the German supplier is higher than the price from the US supplier when converted to dollars per pound.
This is because the price per kg is lower but the conversion to pound makes it higher.
The price of the wax from the U.S. supplier in €/kg would be: €25.53 / 2.20 lb = €11.67/kg.
The price of the wax from the German supplier in $/lb would be $11.90 / 0.76 = $15.68/lb.
To learn more about Pricing,
https://brainly.com/question/25716956
#SPJ4
Write the equilibrium expression, Kc, for Reaction 4: H2 + I2 ⇌ 2HI (Hint: Because of the coefficient “2” in front of HI, you will have to square the concentration of HI to find Kc.)
The formula for the equilibrium constant is; [tex][HI]^{2} /[H_{2} ] [I_{2} ][/tex]
What is the equilibrium constant?We know that when we talk about the equilibrium constant that we are looking at the kind of constant that shows the extent to which there has been the conversion of the reactants to the products.
We can be able to obtain the equilibrium constant of the system by the application of the law of mass action and this would give the correct6 form of the expression for the equilibrium constant. This is how we know which of the species would have the square.
Learn more about equilibrium constant:https://brainly.com/question/10038290
#SPJ1
What is the E0cell? Mg 2+|Mg and Ci2|Ci
The E0cell for the halfcell that we have in the question is 3.73 V.
What is the cell potential?We have to know that the cell potential as we know it has to do with the electrical potential that is involved when we have the oxidation or the reduction of a given specie. In the case of what we have here, we have the cells that are composed of magnesium and chlorine and we want to find the electrode potential of the cells.
We must note that the basis that we can be able to use to find the electrode potential of the cell is the standard hydrogen electrode which has been assigned the value of about 0.00 V and all of the other cell potentials that we have can now be measured against this standard that has been fixed.
We have;
Magnesium half cell= -2.37 V
Chlorine half cell = + 1.36 V
Then we have;
E0cell = + 1.36 - (-2.37)
= 3.73 V
Learn more about cell potential:https://brainly.com/question/1313684
#SPJ1
What is measuring tools for sewing?
Measuring tools like Clear ruler, yardstick, measuring tape etc. They are very useful for the perfect fit and shape of any garment and even home furnishing.
Sewing is the craft of fastening or attaching objects using stitches which is made up of a sewing needle and thread.
Measuring tools are the instruments used by practitioners and researches to aid in the assessment or evaluation of the subjects, clients or patients etc. These instruments are used to measure or collect the data on a variety of variables ranging from psychosocial wellbeing or physical functioning.
Measuring tools in sewing are as follows: Measuring tape, clear ruler, quilting ruler, yardstick, French curve etc.
To know more about sewing here
https://brainly.com/question/1642881
#SPJ4
Question 6
Since the Moon has no living organisms, which method would be best for determining the age of a Moon rock?
А
radioactive dating
B
law of superposition
С
density of sediment collection
D
fossil and mineral comparison
Me
Radioactive dating measures the rate of decay of radioactive materials in rocks.
What is radioactive dating?Radiometric dating, radioactive dating, or radioisotope dating is a technique used to date things such as rocks or carbon that included trace radioactive contaminants when they were produced. Radioactive dating is a technique for dating rocks and minerals that makes use of radioactive isotopes. This approach is appropriate for igneous and metamorphic rocks that cannot be dated using the sedimentary stratigraphic correlation method. There are around 300 naturally occuring isotopes known. The underlying idea behind radiometric dating is that you can compute the age of a sample by comparing the presence of a radioactive isotope within it to its known abundance on Earth and its known half-life (rate of decay).
Here,
Radioactive dating determines the rate at which radioactive elements in rocks decay.
To know more about radioactive dating,
https://brainly.com/question/27527601
#SPJ4
Do you multiply grams to moles?
So
A scientist collected a 37.50 g sample of a
compound. Determine the % composition
of Cr in the compound if the sample is
made up of 19.01g O, Oxygen and 4.76 g
C, Carbon, and the remainder is Cr,
chromium. Type your answer to two
decimal places. Do not put the percent
sign.
Mass is a measure of an object's resistance to acceleration.
1. Calculate the total mass of the sample:
37.50 g
2. Calculate the total mass of the elements O and C:
19.01 g + 4.76 g = 23.77 g
3. Calculate the mass of Cr:
37.50 g - 23.77 g = 13.73 g
4. Calculate the composition of Cr in the compound:
13.73 g / 37.50 g x 100 = 36.56
What is Mass?
The resistance to acceleration of an object is measured by its mass. It is a fundamental property of physical objects and is often expressed in kilograms (kg) or grams (g). Mass is related to the inertia of an object, which is a measure of how difficult it is to change the object's motion. Mass also determines the strength of the gravitational force acting on an object.
To know more about Mass,
https://brainly.com/question/28021242
#SPJ1
Why does c14 have 8 neutrons?
C14 have 8 neutrons, because C have 6 atomic number and it have 14 atomic mas , where atomic mass is total of proton and neutron so the neutron of C14 is 8.
It is commonly known that Carbon-14 is an isotope of carbon. It is also known as a neutral atom. Additionally, the ratio of neutrons to protons varies among different isotopes.
The total number of protons that make up an atom's nucleus is represented by the atomic number of that atom, as is well known. We know that carbon has an atomic number of 6, a mass number of 14. It is common knowledge that mass is the product of protons and neutrons. There will thus be = 14 - 6 = 8 neutrons.
Learn more about neutron at brainly.com/question/29248303
#SPJ4
A ring stand is used to ________ devices during laboratory procedures.
A ring stand is used to hold glassware devices during laboratory procedures.
Ring stands and accessories can make your lab experiments much easier if you are studying chemistry or physics.
A ring stand and its accessories are versatile pieces of equipment that will improve your hands-on activities by allowing you to conveniently heat beakers, flasks, test tubes, and other glassware over an alcohol burner, as well as set up physics apparatus such as moveable pulleys and inclined planes.
Each accessory is supported by a heavy base and an upright rod on the ring stand. To support additional equipment, a ring support is attached to the stand. Glassware is supported above an alcohol burner by wire gauze resting on the ring. To support funnels, crucibles, and evaporating dishes, the triangle rests on the ring. Burettes and test tubes are held in the burette clamp.
Know more about Ring Stand here:
https://brainly.in/question/13111005
Tropospheric ozone is rapidly consumed in many reactions, including:
SO3(g) + NO(g) --------> NO2(g) + O2(g)
Use the following data to calculate the instantaneous rate of the preceding reaction at t = 0. 000 s and t = 0. 0520 s. Express your answers to three significant figures.
Time (s) [NO] (M)0. 000 2. 00 x 10^-80. 0110 1. 80 x 10^-80. 0270 1. 60 x 10^-80. 0520 1. 40 x 10^-80. 1020 1. 20 x 10^-8
Part 1:
For t = 0. 000 s: ________ M/sPart 2:For t = 0. 052 s: _________ M/s
Part-1 The instantaneous rate at 0.000s is 1.8 ×10⁻⁷m/s.
Part-2 The instantaneous rate at 0.0s is 5.3×10⁻⁸m/s.
What do the terms average rate and instantaneous rate mean?The concentration change over a chosen time period is the average rate. When you take the measurements makes a difference. The instantaneous rate is the rate that exists at a specific time. The solution is found at that point by determining the slope of the tangent to the concentration vs. time curve.
Given chemical reaction,
SO₃(g) + NO(g) --------> NO₂(g) + O₂(g)
t = 0. 000s
instantaneous rate = 1.38×10⁻⁸ - 2.0×10⁻⁸/0.011 - 0.000
instantaneous rate = 1.8 ×10⁻⁷m/s
Therefore the instantaneous rate at 0.000s is 1.8 ×10⁻⁷m/s.
for t = 0.052s,
instantaneous rate = 1.2×10⁻⁸ - 1.6×10⁻⁸/0.102 - 0.027
instantaneous rate = 5.3×10⁻⁸m/s.
Therefore the instantaneous rate at 0.0s is 5.3×10⁻⁸m/s.
To know more about instantaneous rate visit:
https://brainly.com/question/28168147
#SPJ4
PLS HELP ME WITH THIS QUESTION answer all blanks
The balanced chemical equation is N₂ + 3 H₂[tex]\rightarrow[/tex] 2 NH₃ which gives the formation of ammonia.
What is chemical equation?
Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ1
What is the function of a climograph?
Answer:
A climograph is a graphical representation of the climate of a particular location over a period of time. It typically shows the average temperature and precipitation for a specific location over the course of a year, with the temperature plotted on the y-axis and the months of the year plotted on the x-axis.
The primary function of a climograph is to provide a visual representation of the climate of a particular location, which can be useful for understanding the weather patterns and temperature ranges that are typical for that location. Climographs can also be useful for comparing the climate of different locations, as they provide a convenient way to see how temperature and precipitation patterns differ from one place to another.
Which has the larger ionic size Li+ or K?
Answer: K
Explanation: as we move down the group new shells are added and this increases the distance between the outermost electron and the nucleus.
What is the mass of 10 g?
The amount of matter contained within an object is commonly referred to as mass. The most typical way to measure it is as inertial mass, which refers to an object's resistance to acceleration under the influence of a net force.
Although the size of an object and its mass are frequently associated, larger objects do not always have more mass. For instance, an inflated balloon would have substantially less mass than a silver golf ball. Although there are numerous alternative units used to describe mass around the world, the kilogram is the accepted unit of mass according to the International System of Units (SI) (kg).
Learn more about mass here:
https://brainly.com/question/15940284
#SPJ4
Calcium oxide reacts with water to form calcium hydroxide. Type of reaction ____________________________ Balanced chemical equation:
Calcium oxide reacts with water to form calcium hydroxide which is a type of combination reaction. Therefore, the balanced chemical equation is: CaO+H2O→Ca(OH)2+Δ
The symbolic representation of a chemical reaction is a chemical equation. In this, the formulas and symbols for the reactants and products are used to depict them. Since the Middle Ages, quicklime, also known as calcium oxide, has been utilized as an alkaline substance. One of the oldest substances that humans have ever discovered is quicklime. Other names for it include lime or burned lime. Lime, or calcium oxide, is a chemical substance with the formula CaO. When calcium oxide, also referred to as quick lime, and water combine, calcium hydroxide is created (commonly known as slaked lime). This reaction is an example of a combination reaction.
Calcium oxide + Water → Calcium hydroxide
To learn more about calcium oxide click here https://brainly.com/question/20417380
#SPJ4
Graph the system on a separate sheet of paper and determine the number of solutions it has one solution If it has one
determine its coordinates.
2x + 3y = 12
2x - y = 4
To learn more about linear equations refer to:
brainly.com/question/30206248
#SPJ1
Which of the following is incorrect:
A. Protons contribute to the mass of the atom
B. Electrons have a negative charge
c. Neutrons are found in the nucleus of the atom
d. Electrons, neutrons and protons all have the same mass
Answer: D
Explanation:
electrons have no mass
In a car engine, energy in the fuel ___ energy tore i tranferred to ueful kinetic energy tore
In a car engine, energy in the fuel's chemical energy stores is transferred to useful kinetic energy stores.
Explanation:
Chemical energy is the form of energy held within the fuel. A car's engine operates by burning fuel. The fuel is burned, creating mechanical energy that moves the vehicle. The engine thus transforms chemical energy into mechanical energy.
What are the Energy Conversions of a car?By applying pressure to the pistons and exerting work on them, the internal combustion engine of a car transforms the potential chemical energy in gasoline and oxygen into thermal energy, which is then translated into mechanical energy that drives the vehicle (raising its kinetic energy).
To learn more about fuel's chemical energy visit;
https://brainly.com/question/11867037
#SPJ4
Prior to making your first extrication cut, you must first stabilize the vehicle. What tool will you use
Cribbing is the tool we use prior to making your first extrication cut in the vehicle
Before making the first extrication cut, it is important to stabilize the vehicle to prevent it from moving and to ensure the safety of the individuals involved in the extrication process. One tool that is commonly used to stabilize a vehicle during extrication is a set of stabilizing struts, also known as cribbing. Cribbing is a set of wooden or composite blocks that are placed under the vehicle to support it and prevent it from moving. The cribbing is typically placed at strategic points, such as the frame of the vehicle or the wheels, to provide a stable base for the vehicle.Additionally, other tools like wheel chocks, jacks, and air bags may be used to provide additional support and stability. The extrication team will assess the situation and choose the most appropriate tool to stabilize the vehicle.
Learn more about extrication here:
https://brainly.com/question/29910467
#SPJ4