Answer:
5.6
Explanation:
Not so sure
At a construction site, a 68.0 kg bucket of concrete hangs from a light (but strong) cable that passes over a light friction-free pulley and is connected to an 85.0 kg box on a horizontal roof (see the figure (Figure 1)). The cable pulls horizontally on the box, and a 46.0 kg bag of gravel rests on top of the box. The coefficients of friction between the box and roof are shown. The system is not moving.
Following are the calculation to the friction force:
Please see the diagram below for an illustration of the forces acting on objects.Therefore, m denotes the mass of a gravel bag, and M denotes the overall mass of the box.Whenever the system is stationary, the friction force on the box equals the tension in the string.The substring tension force is provided as follows:
[tex]\to T-m_{1}g=0 \\\\\to T = m_{1}g \\\\[/tex]
[tex]= (68\ kg) (9.81 \ \frac{m}{s^2} ) (\frac{ 1\ N}{ 1\ kg \cdot \frac{m}{s^2}}) \\\\ = (68 ) (9.81 ) ( 1\ N) \\\\= 667.08\ N \\\\[/tex]
Therefore, the friction force on the box is "667 N".
Learn more:
brainly.com/question/2285391
Comparing energy resources
Answer:
Sorry, This Photo is not clear.
What is the possible resultant of a 2-unit vector and 4-unit vector?
Answer:
Explanation:
resultant could have magnitude 4 - 2 ≤ V ≤ 4 + 2 or 2 ≤ V ≤ 6
If θ is the angle of the 4 unit vector, the resultant could have angle φ in the range of
φ = θ ± arcsin (2/4)
θ - 30° ≤ φ ≤ θ + 30°
The possible resultant of a 2-unit vector and 4-unit vector is 6 and 2.
What is a Unit vector?The quantity which has both the magnitude and direction is known as vector.The Examples for Vector quantity is Acceleration, velocity, force and displacement, etc.,.The quantity which has only the magnitude but has no direction, (examples include speed, time and distance) can be known as scalar.If the magnitude of vector is 1, then it can be the Unit vector.
In the Unit vector, x axis will have the vector of i, y axis will have the vector j, z axis will have the vector k.
When two vectors are in same direction then we add up to get their resultant and in this case resultant would be maximum
R = A + B
R = 4 + 2
R = 6
If vectors are in opposite direction then they provide minimum resultant and in this case we subtract them
R = A - B
R = 4 - 2
R = 2
Thus, the possible resultant are 6 and 2.
Learn more about Possible resultant,
https://brainly.com/question/10655545
#SPJ2
Carrie is driving a car. Which factors determine the kinetic energy of her car
at this point
Answer:
The two main factors that affect kinetic energy are mass and speed.
Explanation:
Kinetic energy is the energy that is caused by the motion. The kinetic energy of an object is the energy or force that the object has due to its motion. Your moving vehicle has kinetic energy; as you increase your vehicle's speed, your vehicle's kinetic energy increases.
Have a great day! :D
PLEASE HELP BRAINLIEST TO THE RIGHT ANSWER!!!!!
A 7.8 kg object is suspended by a string from the ceiling of an elevator. The acceleration of gravity is 9.8 m/s^2.
A. Determine the tension in the string if it is accelerating upward at a rate of 1.5 m/s^2. Answer in units of N.
B. Determine the tension in the string if it is accelerating downward at a rate of
1.5 m/s^2
Gravitational pull downward on the object: 7.8 x 9.8 = 76.44N
A. 7.8 x 1.5 = 11.7N upward force
Tension = 76.44 + 11.7 = 88.14 N
Answer: 88.14 N
B. 76.44 - 11.7 = 64.74N
Answer: 64.74 N
Answer:
88.14 N
64.74 N
Explanation:
Which is the best way to avoid plagiarism? O use more than one source from your research O repeat information from your sources O present a topic in your own words O understand your topic before you begin writing
Answer:
O present a topic in your own words
Explanation:
Plagiarism is using someone else's words or work without giving them proper credit. Presenting a topic in your own words means you are not copying anyone.
Answer:
present a topic in your own words
Explanation:
A 45 kg figure skater is spinning on the toes of her skates at 1.1 rev/s. Her arms are outstretched as far as they will go. In this orientation, the skater can be modeled as a cylindrical torso (40 kg, 20 cm average diameter, 160 cm tall) plus two rod-like arms (2.5 kg each, 71 cm long) attached to the outside of the torso. The skater then raises her arms straight above her head. In this latter orientation, she can be modeled as a 45 kg, 20-cm-diameter, 200-cm-tall cylinder.
What is her new rotation frequency, in revolutions per second?
Answer: HOPE THIS HLEP YOU
Explanation:
A car of mass 200 kg, moving with a forward acceleration of 3 m/s-ıs acted upon by
constant resistive force of 500 N. Calculate the force exerted from the engine to
maintain this forward acceleration.
Answer:
600 N
Explanation:
The force exerted from the engine to maintain this forward acceleration is 600 N.
What is force?Force is defined in physics as: the push or pull on an object with mass that causes it to change velocity. Force is an external agent that can change the state of rest or motion of a body.
The term "force" has a specific meaning in science. At this level, it is perfectly acceptable to refer to a force as a push or a pull.
A force is not something that an object possesses or possesses. Another object applies a force to another.
We know that,
F = ma
Here, it is given that
Acceleration = 3 m/s
Mass = 200Kg.
So, by keeping the value
F = 200 x 3
F = 600 N
Thus, the force is 600 N.
For more details regarding force, visit:
https://brainly.com/question/13191643
#SPJ2
In an earlier chapter you calculated the stiffness of the interatomic "spring" (chemical bond) between atoms in a block of lead to be 5 N/m. Since in our model each atom is connected to two springs, each half the length of the interatomic bond, the effective "interatomic spring stiffness" for an oscillator is 4*5 N/m = 20 N/m. The mass of one mole of lead is 207 grams (0.207 kilograms).
What is the energy, in joules, of one quantum of energy for an atomic oscillator in a block of lead?
Answer:
8.01e-22
Explanation:
The energy of one quantum of energy for an atomic oscillator in a block of lead is 0.102 J.
Extension produced by one mole of leadThe extension produced by one mole of lead atom is calculated by applying Hooke's law;
F = kx
mg = kx
x = mg/k
x = (0.207 x 9.8) / (20)
x = 0.101 m
Energy stored in the lead blockThe Energy of one quantum of energy for an atomic oscillator in a block of lead is calculated as follows;
E = ¹/₂kx²
E = ¹/₂ (20)(0.101)²
E = 0.102 J
Thus, the energy of one quantum of energy for an atomic oscillator in a block of lead is 0.102 J.
Learn more about Hooke's law here: https://brainly.com/question/2648431
I need the answer to this question
Answer:
I don't see anything so you should repost
A block slides down a smooth ramp, starting from rest at a height h. When it reaches the bottom it's moving at speed v. It then continues to slide up a second smooth ramp. At what height is its speed equal to v/2
Answer:
3h/4
Explanation:
At speed v/2 height will be 3/4 h
What is equation of motion in kinematics?Equation that describes the motion of point , bodies , and system of bodies without considering the force that cause them to move is called equation of motion in kinematics
When block is at top of first ramp
u=0 ( block was at rest )
a = g ( acceleration due to gravity
using equation of motion
2as = v^2 - u^2
2gh = v^2
Then the block continued and reached a speed of v1 = v/2 on second ramp
now , final velocity = v= v1 =[tex]\sqrt{2gh}[/tex] / 2
u= [tex]\sqrt{2gh\\}[/tex]
s= h1
using equation of motion , we get
2as = v^2 - u^2
2(-g)h1 =( [tex]\sqrt{2gh}[/tex]/2)^2 - [tex]\sqrt{2gh}[/tex]
2(-g)h1 = (g h - 4 g h) / 2
h1 = 3/4 h
At speed v/2 height will be 3/4 h
learn more about equation of motion in kinematics:
https://brainly.com/question/14355103?referrer=searchResults
#SPJ2
A person is pushing a box with 5 N to the right while another person pushes with 10 N to the left, what is the net force on the box?
Answer:
Fnet = 5 Newton
Explanation:
Fnet = 10 N - 5 N
Fnet = 5 N
A car driving on level ground at 20.0 m/s slams on its brakes and skids to a halt. If the coefficient of kinetic friction between the car’s tires and the road is 0.750, how far does the car skid before stopping? How far would the car have skidded if it had been moving at 40.0 m/s?
The distance the car has skidded if it had been moving at 40.0 m/s is 27.2m
The linear force acting on the car is opposed by the frictional force. Hence;
[tex]F=F_f[/tex]
[tex]ma = -\mu R\\ma =-\mu mg[/tex]
m is the mass of the car
a is the acceleration
[tex]\mu[/tex] is the coefficient of friction
R is the normal force
Given the following parameters
[tex]a=-\mu g[/tex]
[tex]a =-0.75(9.8)\\a=-7.35m/s^2[/tex]
Get the distance the car has skidded if it had been moving at 40.0 m/s
[tex]v^2=u^2+2as[/tex]
[tex]0^2=20^2+2(-7.35)s\\0=400-14.7s\\s=\frac{400}{14.7}\\s= 27.2m[/tex]
Hence the distance the car has skidded if it had been moving at 40.0 m/s is 27.2m
Learn more here: https://brainly.com/question/15246552
Mr foster and his students have launched a small rocket. The rocket has just started moving upward due to the thrust
The thrust force that cause the small rocket can be defined as a push, Thrust is a force or a push.
From Newton's First Law
Newton's first law can be stated as:
A body will continue ti be arrest or uniform motion except acted upon by an external force
If an object, such as the rocket, is at rest then the forces on it are balanced. It takes an additional force to unbalance the forces and make the object move. If the object is already moving, it takes such an unbalanced force, to stop it, change its direction from a straight line path, or alter its speed.
Newton's Second Law
This law of motion is essentially a statement of a mathematical equation. The three parts of the equation are
Mass (m)Acceleration (a), and force (f)Using letters to symbolise each part, the equation can be written as follows:
F = ma
Learn more at :
https://brainly.com/question/20337199
Answer:answer in image
Explanation:
mark me brainliest
I will mark brainlist
If a wave’s amplitude is 2cm, then its height is equal to:
5 cm.
0 cm
4 cm.
2 cm
Answer:
4 cm
Explanation:
Amplitude is the measure from the MIDLINE to the peak of the wave....so the wave HEIGHT is twice the ampltude
2 x 2 cm = 4 cm
The fundamental cause of a variable star's change in luminosity is that the star's _____ is changing.
Ignoring any effects of dc resistance, what is the total reactance of a 250 mH coil in series with a 4.7 microfarad capacitor at a signal frequency of 60 Hz
The total reactance of the inductor and the capacitor is 470.1 ohms.
The given parameters;
inductance of the coil, L = 250 mHcapacitance, C = 4.7 μfrequency of the circuit, f = 60 HzThe inductive reactance of the coil is calculated as follows;
[tex]X_l = \omega L\\\\X_l = 2\pi f L\\\\X_l = 2\pi \times 60 \times 250 \times 10^{-3}\\\\X_l = 94.26 \ ohms[/tex]
The capacitive reactance of the capacitor is calculated as follows;
[tex]X_c = \frac{1}{\omega C} \\\\X_c = \frac{1}{2\pi f C} \\\\X_c = \frac{1}{2\pi \times 60 \times 4.7 \times 10^{-6}} \\\\X_c = 564.31 \ ohms[/tex]
The impedance of the circuit is calculated as follows;
[tex]Z = \sqrt{(X_c - X_l)^2} \\\\Z = X_c - X_l\\\\Z = 564.31 - 94.26\\\\Z = 470.1 \ ohms[/tex]
Thus, the total reactance of the inductor and the capacitor is 470.1 ohms.
Learn more here:https://brainly.com/question/10886711
Be able to list the three compounds that are formed as products of highly exothermic
reactions such as detonating nitrogen-based explosives?
Answer:
Ammonium perchlorate NH4ClO4
Ammonium Nitrate
Calcium Cyanamide
When detonated, the reaction products are all gases, such as water vapor, nitrogen gas, and oxides of nitrogen.
Hopefully this helps :)
A phone is dropped from the roof of the school building. The building is 13.2 meters high. How long was the phone in the air before it crashed on the ground?
Answer:
5scs
Explanation:
phones fall fast so i guessed
when an object is immersed in liquid at rest,why is the net force on the object is the horizontal direction equal to zero?
Based on Newton's third law, the pressure is the same on points that are at the same level but on opposite sides.
Why is the net force in the horizontal direction on an object immersed in a liquid at rest equal to zero?When an object is immersed in a fluid at rest,
the fluid exerts a force on its surface which always normal to the object's surfacethe pressure is the same on points that are at the same level but on opposite sides.Therefore, the net force along horizontal firection is equal to zero.
Learn more about net forces at: https://brainly.com/question/14361879
Question 3 of 20 :
Select the best answer for the question.
3. Which of the following accurately describes the behavior of water when subjected to
temperature change?
A. The volume of water will decrease if heated from 6°C to 7°C.
B. The volume of water will increase if cooled from 3°C to 2°C.
O C. A mass of water will contract if cooled from 1°C to 0°C.
D. A mass of water will expand if heated from 0°C to 2°C.
As water cools the volume expands.
Answer: B. The volume of water will increase if cooled from 3°C to 2°C.
Which strategy should you use if your research question is too broad for the scope of your project? (1 O narrow the focus of research question o add another research question o use the very first source you find for your project O change the scope of your project
Answer:
"Narrow the focus of research question"
Explanation:
O Narrow the focus of research question
This is good! You can still use your question, but focus in on something so you have a proper research project.
O Add another research question
Would adding another question to an already broad question help? No.
O Use the very first source you find for your project
If your question is too broad, you should not use whatever you see first as it may be incorrect or does not answer the question
O Change the scope of your project
You could, but if you have a set scope for your project (a) you might not be able to change it (b) you don't need to restart
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
In an oscillating LC circuit, when 86.6% of the total energy is stored in the inductor's magnetic field, (a) what multiple of the maximum charge is on the capacitor and (b) what multiple of the maximum current is in the inductor
We have that for the Question "(a) what multiple of the maximum charge is on the capacitor and (b) what multiple of the maximum current is in the inductor"
Answer:
a) maximum charge = [tex]0.366Q_{max[/tex]b) maximum current = [tex]0.931I_{max}[/tex]
From the question we are told
In an oscillating LC circuit, when 86.6% of the total energy is stored in the inductor's magnetic field
A) When 86.6\% energy is stored in inductor
[tex]\%[/tex]of energy stored in electric field = [tex]1 - 0.866 = 13.4\%[/tex]
[tex]\frac{V_E}{V} = \frac{\frac{q^2}{2c}}{\frac{Q^2}{2c}} = 0.134\\\\\frac{q}{Q} = \sqrt0.134\\\\\frac{q}{Q} = 0.366\\\\q = 0.366Q_{max[/tex]
B)
[tex]\frac{V_B}{V} = \frac{\frac{Li^2}{2}}{\frac{LI^2}{2}} = 0.866\\\\\frac{i}{I} = \sqrt0.866\\\\\frac{i}{I} = 0.931\\\\i = 0.931I_{max[/tex]
For more information on this visit
https://brainly.com/question/23379286
While forming a 1.5kg aluminum statue, a metal smith heats the aluminum to 2700 degrees C, pours it into a mould, and then cools it to a room temperature of 23.0 degrees C. Calculate the thermal energy released by the aluminum during the process.
Answer is supposed to be: 4.7*10^6 j/kg?
The heat released by the aluminum during the process is [tex]3.6 \times 10^6 \ J[/tex].
The given parameters:
Mass of the statues, m = 1.5 kgFinal temperature of the status, t₂ = 2700 CTemperature when it is in the mould, t₁ = 23 ⁰CSpecific heat capacity of aluminum, C = 900The heat released by the aluminum during the process is calculated as follows;
[tex]Q = mc \Delta t \\\\Q = 1.5\times 900 \times (2700 - 23)\\\\Q = 3.6 \times 10^6 \ J[/tex]
Thus, the heat released by the aluminum during the process is [tex]3.6 \times 10^6 \ J[/tex].
Learn more about heat capacity here: https://brainly.com/question/21406849
An applied force accelerates a 4.00 kg block to an initial velocity of 11 m/s across a rough horizontal surface, in the positive x direction. As the block reaches 11 m/s, the applied force is removed. The block then slows to 1.5 m/s at a distance of 4.00 m beyond where the applied force was removed. Determine the magnitude and the direction of the non-conservative force acting on the box as it slides.
The only force opposing the block's sliding as it slows down is friction with magnitude f . By Newton's second law, the net force in this direction is
∑ F = -f = ma = (4.00 kg) a
Assuming constant acceleration a , the acceleration applied by friction is such that
(1.5 m/s)² - (11 m/s)² = 2a (4.00 m)
Solve for the acceleration :
a = ((1.5 m/s)² - (11 m/s)²) / (8.00 m) ≈ -14.8 m/s²
Then the frictional force exerted a magnitude of
-f = (4.00 kg) (-14.8 m/s²)
f ≈ 59.4 N
and was directed opposite the block's motion.
Help please..
Kepler’s third law states that:
A. the orbits of the planets are elliptical.
B. the planets move slower when they are closer to the Sun and faster when they are farther from the Sun.
C. the square of the ratio of the periods of any two planets revolving around the Sun is equal to the cube of the ratio of their average distance from the Sun.
D. objects attract other objects with a force that is directly proportional to the product of their masses, and inversely proportional to the square of the distance between them.
Answer:
c
Explanation:
Harriet is practicing archery. As she draws back an arrow, the arrow has LaTeX: 34.3 J of elastic potnetial energy, and LaTeX: 0.40 J of gravitational potential energy. How much kinetic energy will the arrow have when it is about to hit the ground?
The kinetic energy of the arrow when it is about to hit the ground is 34.7 J.
The given parameters;
elastic potential energy of the arrow, Ux = 34.3 Jgravitational potential energy, P.E = 0.4 JAccording the principle of conservation of energy, the total potential energy of the arrow will be converted to maximum kinetic energy when the arrow is about to hit the ground.
[tex]K.E = P.E + U_x\\\\K.E = 34.3 \ J \ + \ 0.4 \ J\\\\K.E = 34.7 \ J[/tex]
Thus, the kinetic energy of the arrow when it is about to hit the ground is 34.7 J.
Learn more about conservation of energy here:
https://brainly.com/question/24772394
please help asap 100 POINTS and BRAINLIEST to best answer.
D. :)
lmk if im right or wrong
Answer:
D. 5ºC
Explanation:
Not B, because 1k= -457.87 fahrenheit. That means it is also not C. Since the icicles are melting, then that means it is not A either.
5ºC=about 41ºF
What is Motion ?????
Answer:
the action or process of moving or being moved.
Explanation:
which an object changes its position over time
according to Newton's __ law, an object with no net force acting on it remains at rest or in motion with a constant veloctiy
Answer:
i think its his law of inertia
Explanation:
this law is about motion