5, 6, 7 8,? Plzzzzzzzz

Answer:

I not see the number 2

I think that is number 2

Answer:

first and last one should be the answer (not sure about the first, cant see it too good)

Answer:

270 degree rotation about point 0 composition .translations of negative 2 units

Step-by-step explanation:

Answer:

B

Step-by-step explanation:

Took the test

Answer:

The​ homoskedasticity-only F​-statistic and the​ heteroskedasticity-robust F​-statistic typically​ are different.

Step-by-step explanation:

An F statistic is a value derived by running an ANOVA test or a regression analysis to find out if the means between two populations are significantly different.

The homoskedasticity-only” F-statistic is derived by running two regressions, one under the null hypothesis and one under the alternative hypothesis. If the “unrestricted” model fits sufficiently better, reject the null.

In the first regression, the restricted regression (the null hypothesis) is forced to be true. This is the regression in which all the coefficients are set to zero; the relevant regressors are excluded from the regression. In the second regression, the unrestricted regression, the alternative hypothesis is allowed to be true. If the sum of squared residuals is sufficiently smaller in the unrestricted than the restricted regression, then the test rejects the null hypothesis

The heteroskedasticity-robust F-statistic is built in to STATA (“test” command); this tests all q  restrictions at once.

The homoskedasticity-only F-statistic is important historically (and also in practice), and can  help intuition, but isn’t valid when there is heteroskedasticity

Answer:

So first you must understand what your function represents the 2 is your (slope of the line) the +4 is the y intercept.

So you need to plot a point at (0,4) and then you need to use the slope to go up 2 units over 1 unit. And you need to use the negative of the slope to the left of the point you plotted on the y - int so you need to go down 2 units and left 1.

Hope you understood if you didn't drop a comment and I will try to reply.

Answer:

[tex](-5,\frac{1}{2} )[/tex]

Step-by-step explanation:

Midpoint Formula: [tex](\frac{x_1+x_2}{2},\frac{y_1+y_2}{2} )[/tex]

Simply plug in your coordinates into the midpoint formula to find midpoint:

R(-2, 3)

S(-8, -2)

[tex](\frac{-2+-8}{2},\frac{3+-2}{2} )[/tex]

[tex](\frac{-10}{2},\frac{1}{2} )[/tex]

[tex](-5,\frac{1}{2} )[/tex]

Answer:  x ≤ 6

Solution:  -10, -4, 0, 3, 6

Not a solution: 10

Plz mark brainliest:)

The answer to the inequality is [tex]x[/tex] ≤ [tex]6[/tex]

First, you must subtract 17 on both sides

[tex]-2x[/tex] ≥ [tex]-12[/tex]

Then, you must divide -2 on both sides.

[tex]x[/tex] ≥ [tex]6[/tex]

Finally, since x was changed from negative to positive using division, switch the inequality sign.

[tex]x[/tex] ≤ [tex]6[/tex]

Answer:

4a^3b − 6a^2c

Step-by-step explanation:

Answer:

Study 2 will produce a greater power to detect an effect because it has a lower beta level

Step-by-step explanation:

Generally, alpha level is the probability of rejecting the null hypothesis when it's true. Whereas beta level is the opposite and it's the probability of accepting the null hypothesis even though it’s false.

Now, in statistics the lower the alpha level, the more we require a stronger evidence. Thus, a higher alpha level is usually required to produce a stronger evidence.

Now, an increase in alpha level means a decrease in beta level and a decrease in alpha level means an increase in beta level.

This means that the lower the beta level, the greater is the power to detect an effect.

Now, we are told that the beta level in study 1 was larger than the beta level used in Study 2.

Thus, study 2 will produce a greater power to detect an effect because it has a lower beta level

Answer:

atleast 1

Step-by-step explanation:

Answer:

word problems are pretty tricky

Step-by-step explanation:

y= punch

2*y > 4  Liters

y >2 Liters

Answer:2y>4

Step-by-step explanation:

Two times the amount of punch needed =2y. Because this amount must be greater than 4 liters, the inequality is given by 2y>4

Answer:

17160

Step-by-step explanation:

first there are 13 options

then there are 13 - 1 that was chosen

then there are 13 - 2 that were chosen

then there are 13 - 3 that were chosen

so that's 13 options, then 12 options, then 11 options, and then 10 options

and in order to figure out all of the possibilties we mutiply the options so

13*12*11*10 = 17160

little further explaining of why this works:

we have a set of letters (3 in a set)

A B C

what are the possible combinations?

AB

AC

BC

BA

CA

CB

the answer is 6 which is also 3 * 2 * 1 = 6

HOPE THAT HELPS!1! ^_^

Using the Fundamental Counting Theorem, it is found that there are 28,561 ways in which four cards, each of a different face value, can be chosen.

Fundamental counting theorem:

States that if there are n things, each with [tex]n_1, n_2, …, n_n[/tex] ways to be done, each thing independent of the other, the number of ways they can be done is:

[tex]N = n_1 \times n_2 \times \cdots \times n_n[/tex]

In this problem, four cards are chosen, each with 13 ways, hence [tex]n_1 = n_2 = n_3  = n_4 = 13[/tex], and:

[tex]T = 13 \times 13 \times 13 \times 13 = 13^4 = 28561[/tex]

There are 28,561 ways in which four cards, each of a different face value, can be chosen.

A similar problem is given at https://brainly.com/question/19022577

Answer:

37.50/5 = $7.50/week

so the difference is 8.25-7.50 = $0.75/week

Step-by-step explanation:

Answer:

y = 2x + 10

Step-by-step explanation:

Remember, slope-intercept form is:

y = mx + b

where m is the slope and b is the y-intercept.

To write the equation in slope-intercept form, we can just solve the equation for slope-intercept form.

y - 4 = 2(x + 3)

Distribute the 2 on the right side.

y - 4 = 2x + 6

Add 4 to both sides.

y = 2x + 10

Notice, now we have the equation in slope-intercept form.

I hope this helps. Happy studying.

Answer:

False

Step-by-step explanation:

The standard normal distribution is represented by P(-zc < z < zc) = c

From this, you see that -zc is less than the variable of interest z and z is less than zc.

The equation simply means that the probability that -zc is less than z and z is less than zc, is c.

The value zc is NOT a value from the above distribution. All values in the distribution are of the variable z. For example, z might be equal to 1, z might be equal to 6, but the variable of interest in the distribution is z, not zc.

Step-by-step explanation:

Advantages of using measures of dispersion are that it gives us a better idea of the range in which an average was calculated and it is easy to calculate and understand. A disadvantage of using measures of dispersion is that it is a broad measurement because it only shows the maximum and minimum values of data.

Answer:

[tex] \large{3 \times 3 - 2 \times 2}[/tex]

[tex] \large{9 - 4}[/tex]

[tex] \large{5}[/tex]

Answer:

2/9

Step-by-step explanation:

4/18 and that can be reduced by dividing both (denominator and numerator) by 2 which leaves you with 2/9

Hope that helps and have a great day!

Answer:

13 milliliters

Step-by-step explanation:

it is 13

Answer:

x = 3/2

Step-by-step explanation:

2x = 4-1

2x = 3

x = 3/2

hope it will be helpfull

Answer:

3/35

Step-by-step explanation:

3*1=3

5*7=35

3/35

Answer:

it is D trust me

Step-by-step explanation:

Answer:

the answer is d

Step-by-step explanation:

the way you can figure this out is by looking at the figures and finding what transformation came first because of the number of prime notations on a letter in a figure. in this case is was ABC first then A'B'C' then A''B''C''

using that we can now determine the order of how the composition will be written. the first step of the composition is the left most part and the last part of the composition is the right most part. basicly the order is left to right.

we see that figure ABC is reflected across the line m to create the figure A'B'C' relections are written like r for the relection and the sub letter is the line the figure is reflected across to in this case it would be written as r sub m meaning that r sub m is the 2nd part of the composition.

the 2nd step in the composition is when figure A'B'C' turns into figure A''B''C'' the way we find out its transformation is determine whether it was slid or if it was rotated aroound a point of rotation. here we have a rotation. now we got to determine what the center of roation is. in this case its B'. looking at the options there is no negative -90 degrees which means that the rotation happened counter clockwise because all valuse are positive. counter clockwise is to the left. now simple math figure A'B'C 180 degrees would make it need 90 more degrees so 180+90=270 thats the degree of the roation around point B'

rotations are written as R sub point of rotation, __ degrees. in our case it is r sub B', 270 degrees. this is the second step so it will be on the right of the equation.  the full equation turns out to be R sub B', 270 degrees composition of transformations r sub m.

it must be that way because if you rotated the figure first then reflected it it would look like an entirely different image.

pls give brainliest

Answer:

Ava

Step-by-step explanation:

because we multiply by 3 miles, 50 minutes, 0.83

and you get 124.5

its not maura because if you multiply 5 miles, by 1.25 hours you get 6.25

sorry if wrong! hope this helps!

Answer:

1. The expected pay-out on each policy is 250 * 1/90 + 12000 * 1/100 + 17000 * 1/400 = $165.  So that's what the premium would have to be in order to get a profit of 0.

2. The profit per policy is the premium the company receives minus the expected payout = 350 - 165 = $185.

3. The expected profit on 375 policies would be 375 * 185 = $69375

Step-by-step explanation:

Answer:

Main difference between circle & ellipse

Step-by-step explanation:

Circle is a line forming a close loop, all points on the loop line are at equal distance from the centre, that distance is called Radius. Eg : Wheel

Ellipse is also a close loop line, such that distance of locus of all points on the plane to two fixed points (foci) always sum up to same constant. Eg : Orbits of planets

Cricle is the round shape entity in which it contains only radius and double of radius is diameter Thus below explanation is the answer to the Question

Explanation:

Thus we conclude that cricle is totally different from ellipse

To know more about cricle and ellipse

https://brainly.com/question/9689499

Answer:

ok

Step-by-step explanation:

heres a memeeeee

Answer:

2430

Step-by-step explanation:

The revenue is the amount of money generated by an organization from sales or services made in a specific time. The conclusion from the computation made are:

Given that:

[tex]R = (p - 1)(200 - 40p)[/tex]

To calculate the break even, we set R to 0.

So, we have:

[tex](p - 1)(200 - 40p) =0[/tex]

Split

[tex]p - 1 = 0[/tex] or [tex]200 - 40p = 0[/tex]

Solve for p

[tex]p = 1[/tex] or [tex]40p = 200[/tex]

Divide by 40 in the second equation

[tex]p=1[/tex] or [tex]p =5[/tex]

The break even price is at $1 and $5

To maximize his revenue, we have:

[tex]R = (p - 1)(200 - 40p)[/tex]

Open bracket

[tex]R = 200p - 200 - 40p^2 + 40p[/tex]

Rewrite as:

[tex]R = - 40p^2+ 200p + 40p- 200[/tex]

[tex]R = - 40p^2+ 240p- 200[/tex]

Differentiate

[tex]R' = -80p + 240[/tex]

Equate to 0 and solve for p

[tex]-80p + 240=0[/tex]

[tex]-80p =- 240[/tex]

Divide by -80

[tex]p = 3[/tex]

To maximize his revenue, he as to charge $3

The most money he can make is calculated as:

[tex]R = (p - 1)(200 - 40p)[/tex]

Substitute [tex]p = 3[/tex]

[tex]R = (3 - 1)(200 - 40 \times 3)[/tex]

[tex]R = (3 - 1)(200 - 120)[/tex]

[tex]R = 160[/tex]

The most money he can make is $160

The charges he sold when he made $100 is:

[tex]R = - 40p^2+ 240p- 200[/tex]

Substitute 100 for R

[tex]- 40p^2+ 240p- 200=100[/tex]

Collect like terms

[tex]- 40p^2+ 240p- 200-100=0[/tex]

[tex]- 40p^2+ 240p- 300=0[/tex]

Divide through by -20

[tex]2p^2- 12p+ 15=0[/tex]

Using quadratic formula, the solution of p is:

[tex]p = \frac{-b \± \sqrt{b^2 - 4ac} }{2a}[/tex]

So, we have:

[tex]p = \frac{-(-12) \± \sqrt{(-12)^2 - 4\times 2 \times 15} }{2 \times 2}[/tex]

[tex]p = \frac{12 \± \sqrt{24} }{4}[/tex]

[tex]p = \frac{12 \± 4.90 }{4}[/tex]

Split

[tex]p = \frac{12 + 4.90 }{4}\ or p = \frac{12 - 4.90 }{4}[/tex]

[tex]p = \frac{16.90 }{4}\ or\ p = \frac{7.1 }{4}[/tex]

[tex]p = 4.225\ or\ p = 1.775[/tex]

He charged $4.225 or $1.775 to make $100.

Read more about revenue and price at:

https://brainly.com/question/11859895

Answer:

[tex]\huge\boxed{y+3=-(x+2)}\\or\\\boxed{y-3=-(x+8)}[/tex]

Step-by-step explanation:

The point-slope form of an equation of a line:

[tex]y-y_1=m(x-x_1)[/tex]

[tex]m=\dfrac{y_2-y_1}{x_2-x_1}[/tex]

Put the coordinates of the given point:

(-2, -3); (-8, 3)

[tex]m=\dfrac{3-(-3)}{-8-(-2)}=\dfrac{3+3}{-8+2}=\dfrac{6}{-6}=-1\\\\\text{for}\ (-2;\ -3)\\\\y-(-3)=-1(x-(-2))\\\\y+3=-(x+2)\\\\\text{for}\ (-8;\ 3)\\\\y-3=-1(x-(-8)\\\\y-3=-(x+8)[/tex]

Answer:

If this is basic mathematics its =

Step-by-step explanation:

You won't have to worry about sig figs until chemistry.