Step-by-step explanation:
Area of a square = s x s and this equals 10 x s
this is :
s^2 = 10 s divide both sides of the equation by 's'
s = 10 units ( or zero....but that makes no sense)
Rob says -3(x-2) is equivalent to -3x-6. What was his error?
A) heshould have written -3x-2 which would have given him the right answer.
B) hedid not multiply 3 with x to get 3x, and instead put -3x.
C) he had no error.
D) he did not multiply -3 with -2 to get +6 instead of -6
Answer:
D) he did not multiply -3 with -2 to get +6 instead of -6
Step-by-step explanation:
-3(x - 2)
-3x + 6
Compare the two
-3x + 6 ≠ -3x - 6
They are not equal! Looking at the options, D is the answer.
Answer:
The correct answer is D) he did not multiply -3 with -2 to get +6 instead of -6.
To expand -3(x-2), we need to distribute -3 to both terms inside the parentheses, which gives us:
-3(x-2) = -3x + (-3(-2)) = -3x + 6
Therefore, the correct equivalent expression is -3x + 6, not -3x - 6 as Rob wrote. He made a mistake in multiplying -3 and -2, which should have given him +6 instead of -6.
(please mark my answer as brainliest)
What is the volume of a hemisphere with a diameter of 5.5cm, rounded to the nearest tenth of a cubic centimeter.
if the hemisphere has a diameter of 5.5, then its radius is half that or 2.75.
[tex]\textit{volume of a hemisphere}\\\\ V=\cfrac{2\pi r^3}{3}~~ \begin{cases} r=radius\\[-0.5em] \hrulefill\\ r=2.75 \end{cases}\implies V=\cfrac{2\pi (2.75)^3}{3}\implies V\approx 44~cm^3[/tex]
28) The waiting time for the first claim from a good driver and the waiting time for the first claim from a bad driver are independent and follow exponential distributions with mean 6 years and 3 years, respectively. What is the probability that the first claim from a good driver will be filed within 3 years and the first claim from a bad driver will be filed within 2 years? 18 18 18
Previous question
The probability that both events occur simultaneously is 0.1913.
We can model the waiting time for the first claim from a good driver and the waiting time for the first claim from a bad driver as independent exponential distributions with mean 6 years and 3 years, respectively.
Let X be the waiting time for the first claim from a good driver and Y be the waiting time for the first claim from a bad driver.
Then, P(X ≤ 3) = 1 - e^(-3/6) = 0.3935 and P(Y ≤ 2) = 1 - e^(-2/3) = 0.4866.
Since X and Y are independent, the probability that the first claim from a good driver will be filed within 3 years and the first claim from a bad driver will be filed within 2 years is
(X ≤ 3) * P(Y ≤ 2) = 0.3935 * 0.4866 = 0.1913(rounded to four decimal places).
(rounded to four decimal places).
Therefore, the probability that both events occur simultaneously is 0.1913.
For more questions like Probability click the link below:
https://brainly.com/question/30034780
#SPJ11
Here is a scale drawing of a garden. Tom wants to plant a tree in the garden according to the following rules: It must be 4 m from A and 2 m from CD. Place a cross where Tom can plant the tree. D 2.5 cm A 4 cm C B 1 cm represents 2m
Answer:
the cross is the blue color
Find m ∠ R . Use the Picture
m∠R is therefore 76 degrees as a triangle's total sides equal 180 degrees.
what is angle ?The degree of rotation between two lines or two planes around a central point is measured by an angle. Typically, it is expressed in radians or degrees. Angles are used in many mathematical and scientific uses, including trigonometry, physics, and engineering, where they are crucial in determining the shape and characteristics of geometric figures. Angles come in four different varieties: acute (less than 90 degrees), right (exactly 90 degrees), oblique (more than 90 degrees), and straight (exactly 180 degrees).
given
Because a triangle's total sides equal 180 degrees, we have:
R, S, and T add up to 180.
Inputting the numbers provided yields:
m∠R + 72 + 32 = 180
Simplifying the equation:
m∠R = 76
m∠R is therefore 76 degrees as a triangle's total sides equal 180 degrees.
To know more about angles visit:
https://brainly.com/question/14569348
#SPJ1
Given the following Year 12 balance sheet data for a footwear company:
Balance Sheet Data
Cash on Hand 2,000
Total Current Assets 78,000
Total Assets 315,000
Overdraft Loan Payable 4,000
1- Year Bank Loan Payable 8,000
Current Portion of Long-Term Loans 13,000
Total Current Liabilities 48,000
Long - Term Bank Loans Outstanding 105,000
Shareholder Equity Year11 Balance Year 12 Change Common Stock 10,000 0 10,000
Additional Capital 100,000 0 100,000
Retained Earning 30,000 22,000 52,000
Total Shareholder Equity 140,000 +22,000 162,000
Based on the above figures and the formula for calculating the debt-assets ratio, the company's debt-assets ratio (where debt is defined to include both short-term and long-term debt) is
a) 0.375
b) 0.413.
c) 0.40.
d) 0.318.
e) 0.333.
Based on the above figures and the formula for calculating the debt-assets ratio, the company's debt-assets ratio (where debt is defined to include both short-term and long-term debt) is 0.413 or 41.3%.
The given balance sheet data,
Balance Sheet Data
Cash on Hand 2,000
Total Current Assets 78,000
Total Assets 315,000
Overdraft Loan Payable 4,000
1- Year Bank Loan Payable 8,000
Current Portion of Long-Term Loans 13,000
Total Current Liabilities 48,000
Long-Term Bank Loans Outstanding 105,000
Shareholder Equity Year11 Balance Year 12 Change Common Stock 10,000 0 10,000
Additional Capital 100,000 0 100,000
Retained Earning 30,000 22,000 52,000
Total Shareholder Equity 140,000 +22,000 162,000
The debt-assets ratio is calculated by dividing the total debt (current liabilities + long-term loans) by the total assets.
In this case, the total debt is 48,000 + 105,000 = 153,000
and the total assets are 315,000.
Thus, the debt-assets ratio is 153,000/315,000 = 0.413.
Also, the debt-assets ratio is 0.413 * 100 = 41.3%
The correct answer is b) 0.413.
Learn more about Balance Sheet Data at: https://brainly.com/question/17131502
#SPJ11
What are the expectations for the following $1 bet on a U.S. roulette wheel? (Round each answer to the nearest cent.)
0 & 00 split = $
The expectation for a $1 bet on a U.S. roulette wheel for a 0 & 00 split is -$2. This means that you are expected to lose $2 for every $1 you bet.
The expected payout for a $1 bet on the 0 & 00 split in a U.S. roulette wheel is $0.45.
On a U.S. roulette wheel, there are 38 possible outcomes, consisting of the numbers 1 through 36, 0, and 00.
The 0 and 00 numbers are green, while all other numbers are either red or black.
Placing a $1 bet on the 0 & 00 split means that the bettor is betting that either the 0 or the 00 number will hit. If either of these numbers hits, the payout is 17 to 1, meaning the bettor will receive $17 for every $1 bet.
To calculate the expected payout for a $1 bet on the 0 & 00 split, we multiply the probability of winning (1/38) by the payout ($17), resulting in an expected payout of $0.447.
Therefore, the expected payout for a $1 bet on the 0 & 00 split is:
(1/38) × 17 × $1 = $0.447
Rounding this to the nearest cent, the expected payout for a $1 bet on the 0 & 00 split is $0.45.
Hence, the answer is $0.45.
To learn more about expected payout:
https://brainly.com/question/24855677
#SPJ11
David is working two summer jobs, making $13 per hour landscaping and making $8 per hour clearing tables. In a given week, he can work no more than 16 total hours and must earn no less than $160. Also, he must work at most 13 hours landscaping. If
� x represents the number of hours landscaping and �y represents the number of hours clearing tables, write and solve a system of inequalities graphically and determine one possible solution.
Answer: One possible solution is to work 12.3 hours landscaping and 3.7 hours clearing tables, earning approximately $167.1.
Step-by-step explanation:
Let x be the number of hours landscaping and y be the number of hours clearing tables.
The system of inequalities can be written as:
x ≤ 13 (maximum of 13 hours landscaping)
x + y ≤ 16 (maximum of 16 hours total)
13x + 8y ≥ 160 (minimum earnings of $160)
To graph this system of inequalities, we can start by graphing the boundary lines of each inequality as follows:
x = 13 (vertical line at x = 13)
x + y = 16 (line with intercepts at (0, 16) and (16, 0))
13x + 8y = 160 (line with intercepts at (0, 20) and (12.3, 0))
Note that we only need to graph the portion of the lines that are in the feasible region (i.e. where x and y are non-negative).
The feasible region is the triangle formed by the intersection of the three boundary lines, as shown below:
|
20 --|--------------------------
| /|
| / |
| / |
| / |
16 --|------------------
| / |
|/ |
-------------------------
13 12.3
Let x be the number of hours landscaping and y be the number of hours clearing tables.
The system of inequalities can be written as:
x ≤ 13 (maximum of 13 hours landscaping)
x + y ≤ 16 (maximum of 16 hours total)
13x + 8y ≥ 160 (minimum earnings of $160)
To graph this system of inequalities, we can start by graphing the boundary lines of each inequality as follows:
x = 13 (vertical line at x = 13)
x + y = 16 (line with intercepts at (0, 16) and (16, 0))
13x + 8y = 160 (line with intercepts at (0, 20) and (12.3, 0))
Note that we only need to graph the portion of the lines that are in the feasible region (i.e. where x and y are non-negative).
The feasible region is the triangle formed by the intersection of the three boundary lines, as shown below:
lua
Copy code
|
20 --|--------------------------
| /|
| / |
| / |
| / |
16 --|------------------
| / |
|/ |
-------------------------
13 12.3
The vertices of the feasible region are (0, 16), (12.3, 3.7), and (13, 0).
To determine one possible solution, we can evaluate the objective function (total earnings) at each vertex:
(0, 16): 13(0) + 8(16) = $128
(12.3, 3.7): 13(12.3) + 8(3.7) ≈ $167.1
(13, 0): 13(13) + 8(0) = $169
Therefore, one possible solution is to work 12.3 hours landscaping and 3.7 hours clearing tables, earning approximately $167.1.
ABCD is a quadrilateral A) Calculate the value of x. B) When ABCD is drawn to scale, would the lines AD and BC be parallel or not? You must justify your answer without using a scale drawing
A) The value of x = 45 degrees
B) Lines AD and BC are not parallel when ABCD is drawn to scale.
To solve this problem, we can use the fact that the sum of the angles in a quadrilateral is 360 degrees.
A) angle A + angle B + angle C + angle D = 360
2x + 90 + x + 3x = 360
6x + 90 = 360
6x = 270
x = 45
Therefore, x = 45 degrees.
B) To determine if lines AD and BC are parallel, we can look at the opposite angles of the quadrilateral. If they are supplementary (add up to 180 degrees), then the lines are parallel.
angle A + angle C = 2x + x = 3x = 135 degrees
angle B + angle D = 90 + 3x = 90 + 135 = 225 degrees
Since angle A + angle C and angle B + angle D do not add up to 180 degrees, the opposite angles are not supplementary, and therefore, lines AD and BC are not parallel.
Learn more about quadrilateral here
brainly.com/question/9550663
#SPJ4
The given question is incomplete, the complete question is:
ABCD is a quadrilateral A) Calculate the value of x. B) When ABCD is drawn to scale, would the lines AD and BC be parallel or not?
The volume of the right cone below is 5677 units³. Find the value of x.
According to the given information value of X =16.06
What is the volume of right cone?The volume of a cone defines the space or the capacity of the cone. A cone is a three-dimensional geometric shape having a circular base that tapers from a flat base to a point called apex or vertex. A cone is formed by a set of line segments, half-lines or lines connecting a common point, the apex, to all the points on a base that is in a plane that does not contain the apex.
A cone can be seen as a set of non-congruent circular disks that are stacked on one another such that the ratio of the radius of adjacent disks remains constant.
According to the given information:Cone volume formula
A cone is a solid that has a circular base and a single vertex. To calculate its volume, you need to multiply the base area (area of a circle: π × r²) by height and by 1/3:
volume = (1/3) × π × r² × h
5677 = (1/3) x 22/7 x r² x 21
x = 16.06
Therefore, according to the given information value of X =16.06
To know more about click:
brainly.com/question/10625069
#SPJ1
27. Let W be a subspace, and let S be a spanning set for W. Find a basis for W, and calculate dim(W) for each set S. a) S = COCIOC) 3 0 2 -2 b) S= -2 1 2 2 2
Answer:best thing for you is drink milk
Step-by-step explanation:
Ixl dilations-find the scale factor and center dilation
The scale factor is 2 and center dilation is reduced.
The scale factor is a ratio that describes how much a figure has been enlarged or reduced. It is calculated by dividing the length of the corresponding sides of the original and dilated figures. If the scale factor is greater than 1, then the figure is enlarged, and if it is less than 1, then the figure is reduced.
To find the scale factor in an IXL dilations problem, you need to compare the corresponding sides of the original and dilated figures.
If the original figure has a side length of 4 units, and the dilated figure has a corresponding side length of 8 units, then the scale factor is 8/4=2. This means that the dilated figure is twice as large as the original figure.
The center of dilation is the point about which the figure is enlarged or reduced. It is the fixed point that remains unchanged during the dilation process.
To know more about scale factor here
https://brainly.com/question/30215119
#SPJ4
Elmer is on a Ferris wheel which has a diameter of 180 ft and whose center is 120 ft off the ground. Find all of the angles θ such that 0≤θ≤3π and such that Elmer's carriage is at a height of 165 ft when it makes an angle of θ with the horizontal. Leave your answers in exact form
The angles θ at which Elmer's carriage is at a height of 165 ft are θ = π/6, 13π/6 and 25π/6
The center of the Ferris wheel is represented by the point at the top of the triangle, and Elmer's carriage is represented by the lower point on the right-hand side of the triangle. We are given that the diameter of the Ferris wheel is 180 ft and that its center is 120 ft off the ground. This means that the radius of the Ferris wheel is 90 ft (half of the diameter), and that the distance from the center of the Ferris wheel to Elmer's carriage is also 90 ft.
We are also given that Elmer's carriage is at a height of 165 ft when it makes an angle of θ with the horizontal. Using trigonometry function , we can find the sine of θ as follows:
sin(θ) = (165 - 120) / 90
= 45 / 90
= 1/2
Therefore, we have:
θ = sin^(-1)(1/2)
= π/6
Since we are looking for all angles θ such that 0≤θ≤3π, we need to add multiples of 2π to our answer. The multiples of 2π that satisfy this inequality are 0, 2π, and 4π. Therefore, the solutions to the problem are:
θ = π/6, 13π/6, 25π/6
Learn more about trigonometric functions here
brainly.com/question/14434745
#SPJ4
HELP
Given the information in the diagram of circle P below, find:
Based on the information in the diagram of circle P, the magnitude of the missing angle are as follows;
m∠BPC = 80 degrees.
m∠ADC = 205 degrees.
What is the central angle property?In Mathematics and Geometry, the central angle property states that an inscribed angle is equal to one-half the measure of a central angle that is subtended by the same arc.
Based on the information provided about circle P, the central angle of circle P is represented by m∠BPC and the measure of arc BC is equals to 80 degrees. Therefore, the magnitude of angle BPC is given by:
m∠BPC = 80 degrees.
Since m∠A is an inscribed angle, its magnitude can be calculated as follows;
m∠A = 1/2(m∠BPC)
m∠A = 1/2(80)
m∠A = 40 degrees.
For the magnitude of m∠ADC, we have:
m∠ADC = 360 - (80 + 75)
m∠ADC = 360 - 155
m∠ADC = 205 degrees.
Read more on central angle here: https://brainly.com/question/27203912
#SPJ1
Can someone please help me with this?
The triangles within kite with corresponding angles and sides are similar, so options A, B, D, and E are true statements while options C and F are wrong.
What are similar trianglesSimilar triangles are two triangles that have the same shape, but not necessarily the same size. This means that corresponding angles of the two triangles are equal, and corresponding sides are in proportion.
The line FH bisects the kite so:
triangle ∆FGK is similar to ∆FJK, ∆FGK ≅ ∆FJK
angle m∠GKH corresponds to m∠JKH, m∠GKH ≅ m∠JKH
angle m∠GFH corresponds to m∠JFH, m∠GFH ≅ m∠JFH
triangle ∆GKH is similar to ∆JKH, ∆GKH ≅ ∆JKH.
The line FG is not shown to be same with KG, likewise lines FG and JK, so lines FG ≅ KG and
FG ≅ JK are not true statements.
Therefore, options A, B, D, and E are true statements for the triangles within the kite with corresponding angles and sides that are similar, while options C and F are wrong.
Know more about similar triangles here:https://brainly.com/question/14285697
#SPJ1
Use a double integral to find the area of the region D.
The x y-coordinate plane is given. There is a curve that encloses a region.
The curve, labeled r = √theta, starts at the origin, goes counterclockwise and away from the origin, and ends on the positive x-axis.
The region, labeled D, is the area enclosed by the curve and the positive x-axis.
Geographic area D has an area of /8 square units.
What is the formula for the area?Area is a phrase used to describe how much room a 2D form or surface occupies. Area is measured in square units, such as cm2 or m2. The area of a form is computed by dividing its length by its breadth.
What really is area in plain English?Area is the entire amount of space occupied by a plain (2-D) area or an object's form. The area of a planar figure is the area that its perimeter encloses. The quantity of unit square that cover a closed figure's surface is its area.
0 = √θ
θ = 0
Similarly, the curve intersects the [tex]x-axis[/tex] again when [tex]x = r cos[/tex] θ = √θ cos θ = 0, which implies θ = π/2.
Thus, the limits of integration for θ are [tex]0[/tex] and π/2. For r, the curve is given by [tex]r =[/tex] √θ, so the limits of integration are [tex]0[/tex] and √(π/2).
Evaluating this integral gives:
∫(θ=0 to π/2) [[tex]1/2 r^2[/tex]] (r=0 to √(π/2)) dθ
= ∫(θ=0 to π/2) [[tex]1/2[/tex] (π/2)] dθ
= π/8
Therefore, the area of region D is π/8 square units.
To know more about area visit:
https://brainly.com/question/27683633
#SPJ1
Find five consecutive integers if the sum of the first three is 7 more that the sum of the last two
the consecutive integers are 11, 12, 13, 14, 15 using the given condition.
What is an integer?The group of whole numbers and negative numbers is known as an integer in mathematics. Integers, like whole numbers, do not include the fractional portion. Integers can therefore be defined as numbers that can be positive, negative, or zero but not as fractions. On integers, we can carry out all arithmetic processes, including addition, subtraction, multiplication, and division. It's a good idea to have a backup plan in case something goes wrong. "Z" stands for a number.
Let the consecutive integers be n, n+1, n+2,n+3,n+4.
n+n+1+n+2=7+n+3+n+4
3n+3=14+2n
n=11
therefore the integers are 11, 12, 13, 14, 15.
To know more about integers visit
https://brainly.com/question/15276410
#SPJ1
You are on the observation deck of the Empire State building looking at the Chrysler building when you turn 145° clockwise you see the Statue of Liberty you know that the Chrysler building in the Empire State building or about 0.6 miles apart and that the Chrysler building in the Statue of Liberty are about 5.6 miles apart estimate the distance between the Empire State building in the Statue of Liberty round your answer to the nearest 10th of a mile
A single person earns a gross biweekly salary of $840 and claims 5 exemptions. How will federal taxes affect his net pay?
Option (a) it is the same as the gross pay. is true statement about a person who is claiming 5 exemptions and biweekly salary of $ 840.
What separates a gross pay from a net salary?Yοur incοme is referred tο be yοur grοss pay if it is unaffected by taxes and οther withhοldings.
When referring tο yοur yearly grοss incοme, the phrase "annual pay" is frequently used. Net pay is the amοunt that remains after deductiοns like sοcial security and incοme tax have been made.
the persοn want mοre exemptiοns, it means that persοn thinks that, his οr her salary is less than οthers when cοmpared with οther emplοyee having mοre expenditure, and he οr she dοes nοt want tο pay tax οr will pay minimum amοunt οf tax tο the Gοvernment.
Sο, tο dο this he want exemptiοns.
As,persοn earns a grοss biweekly salary οf $840 and claims 5 exemptiοns.
→it means he οr she want tο reduce his tοtal tax tο minimum amοunt.
→it means he οr she dοes nοt have enοugh mοney in his οr her pοcket thrοughοut the year.
→ there will be nο tax deductiοn οn persοn net pay.And if he fοund caught cheating , he will have tο pay Penality.
Sο, οptiοn (a) it is the same as the grοss pay. is true statement abοut a persοn whο is claiming 5 exemptiοns and biweekly salary οf $ 840.
Learn more about Gross pay
brainly.com/question/14690804
#SPJ1
What is the domain of the square root function graphed below?
The inequality that represents x is x ≥ 0/
A square root function is defined ?The basic square rοοt οperatiοn. (οften knοwn as the "square rοοt functiοn") is a mapping that applies tο the set οf nοnnegative real numbers. The square rοοt functiοn, in geοmetric terms, cοnverts a square's area tο its side length.
The οrder οf pοsitive numbers is preserved by the square functiοn: greater numbers have larger squares. The square, then, is a mοnοtοnic functiοn οn the range [0, +]. With negative numbers, absοlute values are mοre significant than squares, making it a mοnοtοnically decreasing functiοn οn [(, 0]].
Here, The domain of the graph is domain : [0, +∞)
With this, we can clearly state that 0 < x < +∞
Thus, The inequality that represents x is x ≥ 0
To know more about square root visit:-
brainly.com/question/29286039
#SPJ1
A beef rancher randomly sampled 42 cattle from her large herd to obtain a 95% confidence interval to estimate the mean weight of the cows in the herd. The interval obtained was (1010, 1321). If the rancher had used a 90% confidence interval instead, the interval would have been
(A) wider and would have more precision than the original estimate
(B) narrower and would have more precision than the original estimate
(C) wider and would have the same precision as the original estimate
(D) narrower and would have less precision than the original estimate
(E) wider and would have less precision than the original estimate
(E)The interval would have been wider and would have less precision than the original .
A beef rancher randomly sampled 42 cattle from her large herd to obtain a 95% confidence interval to estimate the mean weight of the cows in the herd. The interval obtained was (1010, 1321). If the rancher had used a 90% confidence interval instead, the interval would have been narrower and would have less precision than the original estimate.
If the sample size is constant, then we can say that as the level of confidence is increased, the width of the interval will also increase. This is because a higher level of confidence will require a larger interval to include the population mean. Similarly, if the level of confidence is decreased, then the width of the interval will also decrease as a smaller interval is needed to include the population mean.
This directly implies that if the confidence interval is wider, then it has more precision and vice versa. Hence, Option (E) is the correct answer.
To learn more about confidence interval refer :
https://brainly.com/question/24131141
#SPJ11
James have 18 litres of water. He poured unequally into 3 tank
I. Poured three quarter of water from tank one into tank 2
II. Poured half of the water that is now in tank 2 into tank 3
III. Poured one third of water that is now in tank 3 into tank 1
Answer:
Tank 1: 6 litres
Tank 2: 6.75 litres
Tank 3: 4.5 litres
Step-by-step explanation:
Initially, James had 18 litres of water, and he poured three-quarters of it from tank 1 into tank 2. This means that the volume of water left in tank 1 is:
18 - (3/4) * 18 = 4.5 litres
The volume of water in tank 2 is:
(3/4) * 18 = 13.5 litres
Next, he poured half of the water in tank 2 (which is now 13.5 litres) into tank 3. The volume of water left in tank 2 is:
(1/2) * 13.5 = 6.75 litres
The volume of water in tank 3 is:
13.5 * (1/2) = 6.75 litres
Finally, he poured one-third of the water in tank 3 (which is now 6.75 litres) into tank 1. The volume of water in tank 1 after this is:
4.5 + (1/3) * 6.75 = 6 litres
The volume of water in tank 3 after this is:
6.75 * (2/3) = 4.5 litres
So the final volume of water in each tank is:
Tank 1: 6 litres
Tank 2: 6.75 litres
Tank 3: 4.5 litres
Kierran spends approximately 3 hours per day playing video games and approximately 20 minutes per day doing chores. If Kierran's mother tells him to play video games when he completes his chores, then she is employing the ______________ whereas if she restricts video game play and only allows him to play video games if he does his chores then she is employing the ___________________.
When she restricts video game play and only allows him to play games if he completes his tasks, she is using the punishment technique.
what is unitary method ?A mathematical strategy known as the unitary method involves identifying a single unit value and utilizing it to determine additional values based on how they relate to it. The inverse proportionality method and the method of proportionality are other names for it. When dealing with complex problems that include numerous units or quantities, the unitary technique is frequently employed to solve difficulties requiring ratios and proportions. Several industries, including banking, science, engineering, and mathematics, can use it.
given
When Kieran's mother instructs him to play video games after finishing his work, she is using the reinforcement approach.
Drive reduction theory, the Premack Principle
According to the Premack Principle, low probability conduct can be reinforced by using high probability behavior.
According to the hypothesis of drive reduction, animals will take actions to
When she restricts video game play and only allows him to play games if he completes his tasks, she is using the punishment technique.
To know more about unitary method visit:
https://brainly.com/question/28276953
#SPJ1
Elise saved $184. She bought a scarf, a necklace, and a notebook. After the purchases, she still had $89. 50. The scarf cost three-fifths the cost of the necklace and the notebook cost one-sixth as much as the scarf. How much did the notebook cost?
The cost of the notebook is $4.50
Let's call the cost of the necklace "N" and the cost of the scarf "S". We know that Elise spent a total of $184 on the scarf, necklace, and notebook, so we can write:
S + N + NB = 184
We also know that after making her purchases, Elise had $89.50 left, so we can write:
89.5 = 184 - (S + N + NB)
Simplifying this equation, we get:
S + N + NB = 94.5
We're also given that the scarf cost three-fifths the cost of the necklace, so we can write
S = (3/5)N
Finally, we're told that the notebook cost one-sixth as much as the scarf, so we can write:
NB = (1/6)S
Now we can the substitution method here
(3/5)N + N + (1/6)(3/5)N = 184 - 89.5
Simplifying the right-hand side
(3/5)N + N + (1/6)(3/5)N = 94.5
Combining like terms on the left-hand side
(21/10)N = 94.5
Multiplying both sides by 10/21
N = 45
So the necklace cost $45. We can use this to find the cost of the scarf
S = (3/5)N = (3/5)($45) = $27
And we can use the cost of the scarf to find the cost of the notebook
NB = (1/6)S = (1/6)($27) = $4.50
Learn more about substitution method here
brainly.com/question/14619835
#SPJ4
If AC = 57, find the measure of AB.
Segment Addition Postulate - Meaning, Formula & Examples
Answer:
AB = 27
Step-by-step explanation:
AC = AB + BC
[tex]{ \rm{57 = 3x + (4x - 6)}} \\ \\ { \rm{57 = 7x - 6}} \\ \\ { \rm{7x = 57 + 6}} \\ \\ { \rm{7x = 63}} \\ \\ { \rm{x = 9}}[/tex]
Therefore;
[tex]{ \rm{AB = 3x = 3 \times 9}} \\ { \boxed{ \rm{AB = 27}}}[/tex]
Determine whether the planes are parallel, perpendicular, or neither. If neither, find the angle between them. x + 4 y − 3 z = 1 , − 3 x + 6 y + 7 z = 0
The angle between the two planes is approximately 64.63°.
The two planes x + 4 y − 3 z = 1 and − 3 x + 6 y + 7 z = 0 are neither parallel nor perpendicular. The angle between them can be determined by the following formula:
[tex]\theta = \cos^{-1}\left(\frac{A\cdot B}{\left\lvert A\right\rvert\left\lvert B\right\rvert}\right)[/tex]
where A and B are the normal vectors of the two planes, and \theta is the angle between them.
A normal vector for the plane x + 4 y − 3 z = 1 can be calculated as:
A = \begin{bmatrix} 1 \\ 4 \\ -3 \end{bmatrix}
A normal vector for the plane − 3 x + 6 y + 7 z = 0 can be calculated as:
B = \begin{bmatrix} -3 \\ 6 \\ 7 \end{bmatrix}
The angle between the two planes can be found by plugging the vectors into the formula above:
[tex]\theta
= \cos^{-1}\left(\frac{A\cdot B}{\left\lvert A\right\rvert\left\lvert B\right\rvert}\right)
= \cos^{-1}\left(\frac{(-3)\cdot(-3) + 6 \cdot 4 + 7 \cdot (-3)}{\sqrt{1 + 16 + 9}\sqrt{9 + 36 + 49}}\right)
= \cos^{-1}\left(\frac{-37}{\sqrt{26}\sqrt{94}}\right)\approx 64.63^\circ[/tex]
for such more questions on angle between vectors
https://brainly.com/question/31062862
#SPJ11
Translate the shape A seven squares right and five squares down
The points that form the corners of the shape have the following coordinates: (-1,-6), (0,-4), and (4,-6).
The graph is attached below
To plot these coordinates on a graph, first draw the x and y axes. Label the x-axis with integers from negative 6 to positive 6 and label the y-axis with integers from negative 7 to positive 3. Next, locate the point (-1, -6) on the graph by counting 1 unit to the left of the origin (0) on the x-axis and 6 units down on the y-axis. Place a dot at that location. Repeat the process for the point (0, -4) by plotting a dot at the point where the y-axis intersects the x-axis (0) and 4 units down on the y-axis. Finally, locate the point (4, -6) by counting 4 units to the right of the origin on the x-axis and 6 units down on the y-axis, and place a dot there.
Learn more about graphs here: brainly.com/question/17267403
#SPJ4
The missing graph in the question is in the image attached below
Consider the second order differential equation with initial conditions u" +2u' - 5u = 5 sin(3t), u(1) = 3, u'(1) = 4.5. Without solving it, rewrite the differential equation as an equivalent set of first order equations. In your answer use the single letter u to represent the function u and the single letter v to represent the "velocity function" ul. Do not use u(t) or v(t) to represent these functions. Expressions like sin(t) that represent other functions are OK. u= V Now write the first order system using matrices: u C ] [: + The initial value of the vector valued solution for this system is: u(1) = v(1)
The equivalent set of first-order equations in matrix form is [tex]w' = Cw + [0,[/tex] [tex]5sin(3t)^{T}[/tex] and the initial value of the vector-valued solution is w(1) = [tex][3,4.5]^{T}[/tex].
The given second-order differential equation as a set of first-order equations, we can define a new variable v(t) to represent the derivative of u(t), i.e., v(t) = u'(t). Then, we can rewrite the second-order differential equation as two first-order differential equations:
[tex]u' = v[/tex]
[tex]v' = 5sin(3t) + 5u - 2v[/tex]
where u' and v' represent the derivatives of u and v with respect to t, respectively.
To write this first-order system in matrix form, we can define the vector-valued function w(t) = [u(t), v(t)]^T and write the system as:
[tex]w' = [v, 5sin(3t) + 5u - 2v]^T[/tex]
where the superscript T denotes the transpose of a vector or matrix.
Using this notation, the initial value of the solution vector is given by w(1) =[tex][u(1), v(1)]^T = [3, 4.5]^T.[/tex]
In matrix form, the first-order system can be written as:
[tex][ u' ] [ v ]\\[ ] = [ ]\\[ v' ] [ 5sin(3t) + 5u - 2v ][/tex]
or
[tex]w' =\\[ u' ]\\[ v' ]\\[ v ]\\[ 5sin(3t) + 5u - 2v ][/tex]
where
w =
[tex][ u ]\\[ v ][/tex]
and the coefficient matrix C is given by:
[tex]C =\\[ 0 1 ]\\[ 5 -2 ][/tex]
A differential equation is a mathematical equation that relates a function to its derivatives. It is a powerful tool used in many fields of science and engineering to describe how physical systems change over time. The equation typically includes the independent variable (such as time) and one or more derivatives of the dependent variable (such as position, velocity, or temperature).
Differential equations can be classified based on their order, which refers to the highest derivative present in the equation, and their linearity, which determines whether the equation is a linear combination of the dependent variable and its derivatives. Solving a differential equation involves finding a function that satisfies the equation. This can be done analytically or numerically, depending on the complexity of the equation and the available tools.
To learn more about Differential equation visit here:
brainly.com/question/14620493
#SPJ4
Brittany needed new tires for her truck. She went to the auto shop and bought 4 tires on sale for $85.95 each. The salesman told her that she saved a total of $96.16. If Brittany saved the same amount on each tire, what was the original price of each tire?
The best solution gets brainlist
Answer:
$109.99
Step-by-step explanation:
The original price of each tire is [tex]\[/tex][tex]109.99[/tex]
Solution:Take the amount saved and divide by 4 to find the amount saved on each tire
[tex]96.16\div4 =24.04[/tex]
Add that to the sale price of each tire to find the original price
[tex]85.95+24.04 =109.99[/tex]
Therefore, The original price is $109.99.
based on historical data, it takes students an average of 48 minutes with a standard deviation of 15 minutes to complete the unit 5 test. what is the probability that your class of 20 students will have a mean completion time greater than 60 minutes on the unit 5 test?
Using central limit theorem, the probability that the class of 20 students will have a mean completion time greater than 60 minutes on the unit 5 test is 0.00017332
What is the probability that your class of 20 students will have a mean completion time greater than 60 minutes on the unit 5 test?We can use the Central Limit Theorem (CLT) to approximate the distribution of the sample mean completion time for the class. According to CLT, the distribution of the sample mean is approximately normal, with a mean equal to the population mean and a standard deviation equal to the population standard deviation divided by the square root of the sample size.
In this case, the population mean is given as 48 minutes, the population standard deviation is given as 15 minutes, and the sample size is 20. Therefore, the mean of the sample mean completion time is also 48 minutes, and the standard deviation of the sample mean completion time is 15/√20 ≈ 3.3541 minutes.
To find the probability that the class mean completion time is greater than 60 minutes, we can standardize the distribution of the sample mean completion time using the z-score formula:
z = (x - μ) / (σ / √n)
where x is the value we want to find the probability for (in this case, x = 60), μ is the population mean, σ is the population standard deviation, and n is the sample size.
Plugging in the values, we get:
z = (60 - 48) / (15 / √20) = 3.5777
Using a standard normal distribution table (or calculator), we can find the probability that a z-score is greater than 3.5777.
P = 0.00017332
Learn more on probability here;
https://brainly.com/question/24756209
#SPJ1