Answer:
Deposition
Explanation:
Deposition occurs when water slows or ceases moving, the wind dies or stops blowing, or glaciers melt. The deposited material can also be used to construct new landforms. Waves, for example, can dump sediment in places offshore, where it might accumulate to form sand dunes.When the wind calms down or vegetation stops or slows the breeze, the sediment particles begin to fall. Water is another factor that may erode, move, or deposit sediment. Flowing water is a key erosive agent. Water transports dirt and rock fragments as it moves. Warm, wet air will not travel if wind systems are not present. Water will still evaporate, but it will not move, therefore everywhere else than a major body of water will dry up. Lakes may be fine since evaporating water will flow back into them, and the sea will be fine, but everywhere else will become extremely dry very rapidly. Wind is constantly blowing somewhere on the world at any given time. Winds are usually quiet near the middle of a high pressure system. Wind is the passage of air from a high pressure location to a low pressure area.... So essentially air is always moving. Weathering and erosion are caused by wind. Weathering is caused by wind blowing debris against cliffs and huge rocks. This wears down the rock, reducing it to sand and dust. Sand and dust are also eroded by wind. 2. Rocks are tough and durable, but they don't last forever. Weathering and erosion are processes that occur as a result of forces such as wind and water breaking down rocks. Weathering is the process through which rocks deteriorate. Weathering is caused by a variety of factors, including climate change.
Deposition occurs when wind dies down or stops blowing happens.
What is deposition?Deposition refers to the depositing of sediment carried by wind, flowing water, the sea, or ice. Sediment can be carried in the form of pebbles, sand, and mud, or as salts dissolved in water. Organic activity may later deposit salts.
The fractured rock fragments or soil particles are accumulated in an environment where the energy of the flowing river is reduced. It settles the particles, which compact and form sedimentary rocks over time.
Deposition can occur when a river enters a shallow area of water or when the volume of water decreases, such as after a flood or during a drought. Deposition is common at the mouth of a river near the end of its journey.
Thus, the answer is deposition.
For more details regarding deposition, visit:
https://brainly.com/question/13475951
#SPJ2
Select the correct answer.
In the "Describe the situation" step of the decision-making model, which of the following questions may be helpful to ask yourself?
А What decision needs to be made? OB. Why must this decision be made? OC. How will this decision affect me and others?
OD. All of the above
Answer:
d
Explanation:
what is true about a horizontally launched projectile?
Answer:
it has lateral momentum
Explanation:
it explains itself
A transformer has 500 volts applied to the primary side and 10,000 volts are measured
on the secondary side. If 10mA is applied to the primary side. What is the anticipated
current on the secondary side? Is this a step-up or step down transformer?
Answer:
0.5 mA, step-up transformer
Explanation:
Power is constant
V * I = constant
500 V * 10 mA = 10,000 V * I
so I = 0.5 mA
From 500 V increases to 10,000 V, so it is a step-up transformer
A 75.0-kg athlete performs a single-hand handstand. If the area of the hand in contact with the floor is 125 cm2, what pressure is exerted on the floor
The pressure exerted on the floor by the athlete having a mass of 75 Kg is 58800 N/m²
How to determine the force
Mass (m) = 75 KgAcceleration due to gravity (g) = 9.8 m/s²Force (F) =?F = mg
F = 75 × 9.8
F = 735 N
How to determine the pressure Force (F) = 735 NArea (A) = 125 cm² = 125×10¯⁴ m²Pressure (P) =?P = F / A
P = 735 / 125×10¯⁴
P = 58800 N/m²
Thus, the pressure exerted on the floor is 58800 N/m²
Learn more about pressure:
https://brainly.com/question/1393320
Which of the following best explains why engineers are constantly looking for innovative ways to investigate
and improve fluid power designs?
Changes in fluid power systems lead to increased sustainability, such as decreases in fuel costs and carbon emissions.
Changes in fluid power will reach all different types of applications beyond their current uses.
Changes in fluid power will not benefit efficiency ratings but will decrease the costs of products.
Changes are necessary as more designs and products are created and more power systems are required.
Answer:
Explanation:
What was the answer Im stuck on it rn...
Answer:
Changes in fluid power systems lead to increased sustainability, such as decreases in fuel costs and carbon emissions.
Explanation:
What will make it hard to remember that blood is an organ?
A - it is red
B - it has parts
C - it is a liquid
D - it moves
Answer:
C . it is a liquid
hope it helps you
1. You set the thermostat in your house to 70 degrees so that when it goes above that temperature the air conditioner will turn on. What is the feedback of this system? 2. You set the thermostat in your house to 70 degrees so that when it goes above that temperature the air conditioner will turn on. What is the input of this system?
PLEASE HELP
Answer:
Negative Feedback...... Temperature
Explanation:
as the Temperature increase more than the set point the air conditioner turn on to lower the temperature so that means it is Negative feedback because it is not INHANCING the temperature
Input should be Temperature or Heat because AC turns on when the temperature is getting above 70 degrees
NOW WHERE IS MY BRAINLIESTTTT
Sand and salt are poured into a single beaker. The result is a mixture because_____?
Answer:
Sand and salt are poured into a single beaker. The result is a mixture because they can be separated by simple and easy physical means.
Explanation:
Mixture : Properties :
They are put in a indefinite proportion.They are physically mixed with each other.They can be separated by physical and easily methodsConstituents retain their own propertiesNow let us see these in the perspective of the question :
We could have put more of salt and less of sand, still it would not have become a compound. We had poured it into a single beaker with some physical means.We can use sedimentation and evaporation to separate them. After separating them, the will retain their own properties, it is not that the salt will become bitter or the sand will start not allowing the water to flow through it.These are some few reasons why these getting mixed, becomes a mixture, and we can choose any one point of the properties of mixture and give the answer.
If my answer helped, kindly mark me as the brainliest!!
Thank You!!
WHO WANTS BRAINLY? PLEASE ANSWER THIS PHYSICS QUESTION!
force of 187 N acts on a 7.3 kg bowling ball for 0.40 s.
1. What is the change in momentum of the ball?
2. What is its change in velocity?
Change in momentum of the ball is 74.8 kg m/s
change in velocity of the ball is 0.25 m/s
What is change in momentum?
Change in momentum is the product of mass and change in velocity this is also equal to impusle which ia a product of force and time.
Change in momentum = m ( v - u ) = Impulse = f * t
m = mass
change in velocity = v - u
v = final velocity
u = initial velocity
f = force
t = time
Given:
f = 187 N
m = 7.3 kg
t = 0.40 s
!.
Change in momentum = impulse = f * t
Change in momentum = 187 * 0.40
Change in momentum = 74.8 kg m/s
2.
Change in momentum = m * ( v - u )
( v - u ) = change in momentum / m
( v - u ) = 187 / 7.3
( v - u ) = 10.25 m/s
Read more on Change in momentum and Impuelse here: https://brainly.com/question/904448
An athlete needs to get across a river. She must reach from point A on one bank to point B, which is directly across from point A on the opposite bank. If she wishes to minimize the total time T it would take to do so, at what angle upstreams (measured from the line AB) should she swim? Let her swimming/rowing speed relative to the water be 2.0 mi/h, and her running speed along the bank be 5 mi/h. The river flows downstream at 1.5 mi/h. (The rule of the competition stipulates that the athletes must swim first from point A, then run to reach point B.)
Answer:
θ = 90°
Explanation:
Speed at which she can swim in stationary water; v_m = 2 mi/h
Speed at which the river is flowing downstream; v_r = 1.5 mi/h
This can be illustrated in a form of triangle as attached. Where θ is the angle to the x-axis.
With respect to the bank of the river, the total speed of the girl is;
V_R = v_r + v_m
Now the horizontal component is;
V_R = v_r + v_m(cos θ)
While the vertical component is;
V_R = v_m(sin θ)
Now, the total time taken to get across the river is;
T = width of river/vertical component of total speed
Let's denote width of river as d.
Thus;
T = d/(v_m(sin θ))
Now, we are told she wishes o minimize the total time(T) .
Since the width(d) of the river is constant, and v_m is fixed, then it means the only variable we have is the angle θ.
Now, for the total time to be minimized, the denominator has to be at maximum.
Since angle θ is the only one that is variable, we have to find the value of angle θ that will make sin θ to be at a maximum value.
Now, for sin θ to be maximum, it means it has to be equal to 1.
Thus, θ = sin^(-1) 1
θ = 90°
QUESTION 4
w
If a car is moving at 37 km/h for 42 min, what is the distance that the car has traveled. (Give your answer in terms of meters and round to
the nearest whole number.)
Answer:
s=25956m
Explanation:
first 37 km/h is 10.3 m/s
then 42 min is 2520s
finally s=vt => s=2520s*10.3m/s
s=25,956m
Answer:
25956
Explanation:
Convert 37km/h to m/s =10.3m/s
Where s=vt
S=10.3×2520
S=25,956
S=25,000
What occurs during stage one sleep
Answer:
Stage one of sleep, also known as the transitional phase, occurs when one finds themselves floating in and out of consciousness. During this NREM stage, you may be partially awake while your mind begins to drift off. This period of drowsiness eventually leads to a light sleep
Explanation:
i found it on google
How does the organization know what their needs and expectations are ?
Answer:
When scientific knowledge changes overtime, it can be to anything at anytime. The Explosion in what we know about life form is important and change because we might have a plant we can’t touch or something like that. That is not the only thing that is important about how scientific knowledge change over time it is also the food pyramid. We know that especially The Explosion in What We Know About Life Forms, is because there might be like a new plant we can’t touch because say it is potions or something. According to the life forms article people are wondering if scientist have found all the living species on earth yet
Explanation:
A student is moving a magnet through a coil of wire. Which of these indicates the strength of the electric current in the coil?
Answer:
Can you help me with another question
Explanation:
The electric current in the coil depends on changes in the magnetic field of the magnet.
Electricity is generated when there is relative motion between a conductor and a magnetic field. As the magnet is being moved through the coil of wire, the magnetic flux around the conductor changes and current is induced on it.
Hence, the strength of the electric current in the coil is determined by changes in the magnetic field of the magnet.
Learn more: https://brainly.com/question/9352088
A boulder of mass 4 kg rolls over a cliff and reaches the beach below with a velocity of 20 metres per second minus 1.
what is the kinetic energy of the boulder when it lands?
what is the potential energy on the cliff?
How high is the cliff??
Given:-
Mass of boulder = 10kg
Final Velocity = 15m/s
Acceleration due to gravity = +10m/s
To Find:-
The kinetic energy of the boulder as it lands
The potential energy of the boulder when it was at the top of the cliff
The height of the cliff
Formulae used:-
Kinetic energy = mv²/2
Potential energy = mgh
Now,
We will first find the Kinetic enrgy,
→ K. E = ½mv²
→ K. E = ½ × 10 × (15)²
→ K. E = 5 × 225
→ K. E =1125J
But we know that when the body starts moving the Potential enrgy of the body starts Converting into Kinetic enrgy. Before reaching to the last spot it has equal kinetic energy and Potential energy.
Therefore,
→ mgh = 1125J
The Potential enrgy of the boulder when it was on top is 1125J
Now,
→ mgh = 1125J
→ 10 × 10 × h = 1125J
→ 100h = 1125J
→ h = 1125/100
→ h = 11.25m
Hence, The Height of the Cliff is 11.25m
Thanks!
Mark me brainliest!
Which particles have more speed: Solid or Liquid? Why?
Solar energy can be directly converted to elec-trical energy by which of the following de-vices?
Answer: (c) solar cell
Explanation:
differentiate kinetic energy from potential energy
The main difference between potential and kinetic energy is that one is the energy of what can be and one is the energy of what is. In other words, potential energy is stationary, with stored energy to be released; kinetic energy is energy in motion, actively using energy for movement.
Hope it helps you! :)
Answer:
Potential energy is the energy that happens before kinetic energy, it might be slow and preparing for the kinetic energy act. Kinetic energy is the outcome of the potential energy. You can say a man climbing a hill with his bike is potential energy, and when he rides his bike down is kinetic energy
a girl on a bridge throws a rock straight down at -12.5 m/s. it hits the ground 38.4 m below. How much time did it take?
[tex]\\ \rm\rightarrowtail s=ut+\dfrac{1}{2}gt^2[/tex]
[tex]\\ \rm\rightarrowtail 38.4=12.5t+4.9t^2[/tex]
On solving further we get
t=1.8sA girl on a bridge throws a rock straight down at -12.5 m/s.the time required to hit the ground 38.4 m below is 4.35 s.
Given:
Speed, u = -12.5 m/s
Distance, d = 38.4 m/s
There are three equations of motion present. For the given question, we will use the second equation of motion.
The second equation of motion helps in the determination of velocity, time, and distance. For the given question, we have initial velocity, and distance, to find time we can use the second equation of motion.
From the second equation of motion:
[tex]s = ut + 1/2 at^2\\38.4 = -12.5t - 9.8/2* t^2\\\4.9t^2 - 12.5 t -38.4 = 0[/tex]
Solving the equation, the required time is:
[tex]t = 4.35 s[/tex]
Hence, the time required to hit the ground 38.4 m below is 4.35 s.
To learn more about time, here:
https://brainly.com/question/82806
#SPJ4
29N, 60° +59N, 125° + 72N, 261°
Vectors
389wujh
which means it 240C
Where is the stigma located?
Answer:
At the tip of the pistil
Explanation:
Hope it helped!
Rihanna can go from 0-60 miles per hour in 3.5 seconds. Calculate the acceleration.
Please show ALL work and CIRCLE your answer.
Answer:
7.66 m/s²
Explanation:
The following data were obtained from the question:
Initial velocity (u) = 0 mph
Final velocity (v) = 60 mph
Time (t) = 3.5 s
Acceleration (a) =.?
Next, we shall convert mile per hour (mph) to metre per second (m/s). This can be obtained as follow:
Recall:
1 mph = 0.447 m/s
Initial velocity (u) = 0 mph
Initial velocity (u) = 0 × 0.447 = 0 m/s
Final velocity (v) = 60 mph
Final velocity (v) = 60 × 0.447 = 26.82 m/s.
Finally, we shall determine the acceleration of Rihanna as follow:
Initial velocity (u) = 0 m/s
Final velocity (v) = 26.82 m/s.
Time (t) = 3.5 s
Acceleration (a) =.?
a = (v – u) /t
a = (26.82 – 0) / 3.5
a = 26.82 / 3.5
a = 7.66 m/s²
Thus, the acceleration of Rihanna is 7.66 m/s²
A large toy car has a mass of 15 Kg and is pushed horizontally with a force of 2 N. Assume friction is so small it can be ignored. What is the acceleration?
Answer:
0.133 m/s²
Explanation:
F=ma
F is force
m is mass
a is acceleration
F=ma
2=15.a
a=2/15
a=0.133 m/s²
convert 10 erg into joule
Answer:
0.000001
Explanation:
Went to google converter.
Condition when an organ is impaired sickness
Answer:
As traditionally used, impairment refers to a problem with a structure or organ of the body; disability is a functional limitation with regard to a particular activity; and handicap refers to a disadvantage in filling a role in life relative to a peer group.
Explanation:
Hope this helps u
Crown me as brainliest:)
A bird uses 10 N of force to pull a worm out of the ground a distance of 3 inches. How much work did the bird do?
Answer:
The work done by the bird is 0.762 J
Explanation:
Given;
force applied by the bird, f = 10 N
distance the bird moved the worm, d = 3 inches = 0.0762 m
The work done by the bird is given by;
W = F x d
where;
W is the work done by the bird
d is the distance the bird moved the load
Substitute the given values and estimate the work done by the bird;
W = 10 x 0.0762
W = 0.762 J
Therefore, the work done by the bird is 0.762 J
Which of the following statements about charging objects is FALSE. Select one: If an object gains electrons it becomes positively charged. If an object gains electrons it becomes negatively charged. Charges cannot travel in an insulator. Charges can travel in a conductor.
Answer:
If an object gains electrons it becomes positively charged.
Explanation:
Electrons negatively charge.
What variables do you think affect the strength of the force of gravity between two objects?.
Answer:
Mass and distance.
Explanation:
The force of gravity is proportional to the masses of the two objects and inversely proportional to the square of the distance between them.
Amanda has started running as her primary form of exercise, but she's getting bored with it and finds excuses to procrastinate. It's also getting really hot outside now that it's summer, and Amanda's skin is sensitive to the sun. She has a significant budget available to help her fix the problem but is unsure how to spend the money.
What might be the most appropriate purchase for Amanda?
ANSWER please ⬆️⬆️⬆️ correctly! GIVING OUT BRAINLY STARS!!!
Answer:
: An app thr features menu planning with healthy recipes and pairs with a calorie tracking tool
How can you strengthen the magnetic force of an electromagnet? (check all that apply)
(I'M TAKING TEST PLEASE HELP)
A. Increase the voltage of the battery attached to the electromagnet.
B. Increase the wire coils wrapped around the metal core.
C. Spread out the wire coils wrapped around the metal core.
D. Increase the number of batteries attached to the electromagnet.
1 wrapping the coil around a piece of iron (such as an iron nail)
2 adding more turns to the coil.
3 increasing the current flowing through the coil.