a 0.32 m aqueous solution of an unknown solute has a density of 1.08 g/ml. the molar mass of the solute is 146.8 g/mol. what is the molality of this solution? report your answer in mol/kg and round to the second decimal place.

Answer:

Rubidium

Explanation:

Add the exponents: 2+2+6+2+6+2+10+6+1=37

Look for the atomic number 37

The element having electronic configuration 1s₂, 2s₂, 2p₆, 3s₂, 3p₆, 4s₂, 3d₁₀, 4p₆, 5s₁ is rubidium .

A chemical element is a species of atoms, including the pure substance made entirely of that species, that have a specific number of protons in their nuclei. Chemical elements, in contrast to chemical compounds, cannot be reduced by any chemical process into simpler molecules.

They can be identified by their particular atomic number. The periodic table groups the elements according to their atomic number and draws attention to those with related qualities.

The most vital ingredient for life is carbon. Life as we know it would not exist without this element. You'll see that carbon is the main component of the chemicals required for life.

Thus, The element having electronic configuration 1s₂, 2s₂, 2p₆, 3s₂, 3p₆, 4s₂, 3d₁₀, 4p₆, 5s₁ is rubidium .

To learn more about an element, follow the link;

https://brainly.com/question/13025901

#SPJ2

Answer:

Hot magma rises from the mantle at mid-ocean ridges pushing the plates apart. Earthquakes occur along the fractures that appear as the plates move apart.:

Answer: Increasing the temperature increases reaction rates because of the disproportionately large increase in the number of high energy collisions. It is only these collisions (possessing at least the activation energy for the reaction) which result in a reaction.

Explanation:

Answer:

Not necessarily.

Explanation:

Answer:

there are four peaks in the 13c NMR (B)

To solve this we must be knowing each and every concept related to NMR. Therefore, the correct option is option B among all the given options.

NMR spectroscopy is a form of spectroscopy that may be used to evaluate the quality or purity of such a sample as well as the molecular weight of a substance.

It really is based on the observation that now the nuclei among most atoms have spin and that all nucleus are electrically charged. NMR spectroscopy relies on the electromagnetic radiation absorption in the radiofrequency range 3kHz-300 GHz. There are four peaks in the 13C NMR  spectrum of 1,4-dimethylbenzene.

It occurs at such a wavelength that corresponds to radio frequencies, and when an electron recovers from such an excited state back ground state, it produces the same frequency radio wave.

Therefore, the correct option is option B.

To know more about NMR, here:

https://brainly.com/question/28484846

#SPJ2

Answer:

Option A, A-light bends around the edges of the slit.

Answer:

Resolution is the ability to distinguish two objects from each other. Light microscopy has limits to both its resolution and its magnification.

Answer:

0.714Jg^-10C^-1.

Explanation:

According to specific heat capacity, the specific heat of graphite is -0.714 J/g°C.

Specific heat capacity is defined as the amount of energy required to raise the temperature of one gram of substance by one degree Celsius. It has units of calories or joules per gram per degree Celsius.

It varies with temperature and is different for each state of matter. Water in the liquid form has the highest specific heat capacity among all common substances .Specific heat capacity of a substance is infinite as it undergoes phase transition ,it is highest for gases and can rise if the gas is allowed to expand.

It is given by the formula ,

Q=mcΔT

In the given example, it is calculated as, c=Q/mΔT

Substituting values in above equation, c= 815.1/15×(-76.1)

c=-0.714 J/g°C

Thus, the specific heat of graphite is -0.714 J/g°C.

Learn more about specific heat capacity,here:

https://brainly.com/question/1747943

#SPJ2

Answer:

Rhodium is used to make electrical contacts, as jewelry and in catalytic converters, but is most frequently used as an alloying agent in other materials, such as platinum and palladium. These alloys are used to make such things as furnace coils, electrodes for aircraft spark plugs and laboratory crucibles.

Explanation:

Answer:

They are both letters?

Explanation:

Answer:

it's an acid

Explanation:

because itis soda

Molar mass:-

[tex]\\ \sf\longmapsto LiCN[/tex]

[tex]\\ \sf\longmapsto 7u+12u+14u[/tex]

[tex]\\ \sf\longmapsto 21u+12u[/tex]

[tex]\\ \sf\longmapsto 33u[/tex]

[tex]\\ \sf\longmapsto 33g/mol[/tex]

No of moles=Given Mass/Molar mass

[tex]\\ \sf\longmapsto \dfrac{83}{33}[/tex]

[tex]\\ \sf\longmapsto 2.5mol[/tex]

Answer:

Most of the mass of an atom is found in the nucleus.

Explanation:

Answer:

Atom 1 after gaing 2 electrons have -2 charge

And atom 2 after donating 2 electrons have +2 charge

Explanation:

Answer:

1.14 moles of oxygen will react

Explanation:

The balanced equation of reaction between iron and oxygen is  

4 Fe + 3 O₂  → 2 Fe₂O₃

By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of each compound participate in the reaction:

The molar mass of iron being Fe 55.85 g/mole, then the following amount of mass reacts by stoichiometry: 4 moles* 55.85 g/mole=223.4 g

You can apply the following rule of three: if by stoichiometry 223.4 grams of Fe react with 3 moles of O₂, 84.9 grams of Fe react with how many moles of O₂?

[tex]moles of O_{2} =\frac{84.9 grams of Fe*3 moles ofO_{2} }{223.4 grams of Fe}[/tex]

moles of O₂= 1.14 moles

1.14 moles of oxygen will react

Answer:

The answer is compound because they consist of multiple things.

Answer:

B. (NH₄)₃PO₄

Explanation:

Elevation of boiling point is one of the colligative properties.

Formula is: ΔT = Kb . m . i

ΔT = Boiling T° of solution - Boiling T° of pure solvent.

i = Van't Hoff factor (numbers of ions dissolved)

Kb = Ebulloscopic constant

In this case, all the m are the same so let's dissociate the salts:

NaI → Na⁺  +  I⁻     i = 2

(NH₄)₃PO₄ → 3NH₄⁺  +  PO₄⁻³     i = 4

NaBrO₄  →  Na⁺  +  BrO₄⁻    i = 2

LiCN  →  Li⁺  +  CN⁻         i = 2

KNO2  →  K⁺  +  NO₂⁻        i = 2

The biggest i would have the biggest boiling point, then B is the right answer, ammonium phosphate.

You count the i, with the moles of ions, you dissociate from the salt.

Answer:

I already am

Explanation:

Answer:

i did this so the next person can have brainliest

Explanation:

Answer: The water vapor, carbon dioxide, methane, and other trace gases in the earth's atmosphere absorb the longer wavelength. These are all reasons why infrared waves hit the ground.

The water vapor, carbon dioxide, methane, and other trace gases in the earth's atmosphere absorb the longer wavelength. These are all reasons why infrared waves a part of electromagnetic spectrum  hit the ground.

The electromagnetic radiation consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.

The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.

In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.

Learn more about electromagnetic spectrum,here:

https://brainly.com/question/23727978

#SPJ6

Answer:

1kg= 1000 grams hope it helps

Answer:

Number of representative particles of a substance can be converted to moles of that substance by multiplying it by Avogadro's number as 1 mole=6.023 ×10²³.

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ2

Answer:

This is true

Explanation:

Even at the atomic level when an element is heated up, the atoms continue to move faster and continue colliding.

The opposite happens with the cooling of elements.

Answer:

Metal name (charge in roman numerals) Non metal

for example Iron (III) chloride

Explanation:

The rule for naming special transition metal are as follows -

a) First name the transition metal

b) Now write the name of the non metal in the chemical formula.

c) Write the charge for the non metal.

d) If there is a polyatomic ion, write the Common Ion Table ,its formula and charge.

e) Based on the total charge on the non-metal or polyatomic ion, deduce the total charge on the transition metal

f) Write the charge of transition metal after the name of metal in Roman Numeral in parentheses

non-Metals:

Nitrogen.

Oxygen.

Helium.

Sulfur.

Chlorine.

Explanation/Answer:

Metal atoms have only a few electrons in their outer shell whereas non-metal atoms have lots of electrons in their outer shell. This means that metals tend to react with non-metals. When a metal reacts with a non-metal, electrons transfer from the metal to the non-metal.

HOPE I HELPED!!

According to the enthalpy diagram true statement is that Arrow C indicates that third intermediate reaction is exothermic in nature.

Enthalpy of the reaction gives idea about the exchange of heat during the whole chemical reaction process.

Hence Arrow C indicates that the third intermediate reaction is exothermic is true statement.

To know more about enthalpy, visit the below link:
https://brainly.com/question/14291557

#SPJ2

Answer: c

Explanation:

Answer:

Human exhale

Explanation:

When humans exhale-carbon is that which all humans produce=18% of all carbon output