A 10,000 kg railroad car is rolling at 8.00 m/s when a 6000 kg load of gravel is suddenly dropped in. What is the car's speed just after the gravel is loaded? Express your answer with the appropriate units.

The unknown weight is 16 N and  the mass of the pulley is 4.26 kg.

The weight of the mass can be found using the formula;

W = T

where;

so W = 16.0 N.

To find the mass of the pulley, we need to take into account its weight and the tension in the cable. Since the tension is greater than the weight of the object, we know that the tension is also supporting the weight of the pulley.

T - m_pulley x g = 0

where;

m_pulley = T/g

= 41.8 N/9.81 m/s^2 = 4.26 kg

Learn more about weight here: https://brainly.com/question/2337612

#SPJ1

For solution of a) of the particular question where a thin rod and uniform change lies along the x axis=

λ = linear charge density

Consider a small length "dx" at distance "x" from the origin

dq = small charge on the small length = λ dx

r = distance of small length from point P = sqrt(x2 + d2)

small electric field at P due to small length is given as

dE = k dq/r2

dE = k λ dx /(sqrt(x2 + d2))2

dE = k λ dx /(x2 + d2)

From the diagram , we see that "dE Sinθ" are equal and opposite, hence x-components cancel out.

Net electric field at P is given as

E = ∫ 2 dE Cosθ

E = ∫ 2 (k λ dx /(x2 + d2)) (d/sqrt(x2 + d2))

E = ∫ 2 (k λ d dx /(x2 + d2)3/2)

E = ∫ _{0}^{l/2} 2 (k λ d dx /(x2 + d2)3/2)

E = (2 k λ d) ∫_{0}^{l/2}dx /(x2 + d2)3/2

E = (2 k λ d) ((l/2)/ (d2 sqrt(d2 + (l/2)2))

E = (2 k λ d) (Sinθ _{o}/ d2 )                                    

Since

Sinθ _{o} = (l/2) /sqrt(d2 + (l/2)2)

E = 2 k λ Sinθ _{o}/ d

For solution of b)

for infinite length , θ _{o}= 90

E = 2 k λ Sin90/ d

E = 2 k λ / d

Learn more about charge density here brainly.com/question/12968377

#SPJ4

Answer:

Explanation:

To study the effect of rotation on a small rotating tank, we want the Rossby number to be much less than one, so that rotation will be a controlling factor in shaping the patterns of flow.

Based on the given information, the length scale of the tank is L = 30 cm and the current speed is U = 0.1 cm/s. To calculate the timescale of the motion, Tmotion, we can use the formula Tmotion = L/U, which gives us:

Tmotion = 30 cm / 0.1 cm/s = 300 s

Next, we need to estimate an appropriate rotation period, Trot, so that the Rossby number Ro = Trot / Tmotion will be much less than one. We can use the formula Ro = Trot * U / L, rearrange it to solve for Trot:

Trot = Ro * L / U

If we take Ro to be 0.1 (for example), then we have:

Trot = 0.1 * 30 cm / 0.1 cm/s = 30 s

So, with a rotation period of 30 s and a current speed of 0.1 cm/s, we should expect the rotation to have a significant influence on the patterns of flow in the small rotating tank.

Explanation:

the displacement is the length of direct line of sight from the starting point to the end point. in other word the baseline of the created triangle.

the legs of that triangle are 10 cm and 6 cm.

the angle between both legs is 90 + 45 = 135°.

because 90° is the angle between South and West. and for southwest we have to add 45°

the law of cosine :

c² = a² + b² - 2ab×cos(C)

c is a side, C is the opposite angle, a and b are the other 2 sides.

so, we have in our case

displacement² = 10² + 6² - 2×10×6×cos(135) =

= 100 + 36 - 120×cos(135) =

= 136 - 120×-0.707106781... =

= 136 - 120×-sqrt(2)/2 =

= 136 + 60×sqrt(2) =

= 220.8528137...

displacement = 14.86111751... cm ≈ 15 cm

According to the question, for a car with a force of 18 N and displacement of 8 m, the work done by a car is calculated as 144Nm.

Force may be defined as a process of pushing or pulling on an object that significantly produces acceleration in the body on which it acts. It is an external agent capable of changing a body's state of rest or motion. It has a magnitude and a direction.

According to the question,

The force applied on a car = 18 N

The displacement made by a car = 8m.

Now, the work done is calculated with the help of the given formula:

                          = 18 N × 8m = 144Nm.

Therefore, the work done by a car is calculated as 144Nm.

To learn more about Force and displacement, refer to the link:

https://brainly.com/question/28356414

#SPJ9

Answer:

Explanation:

Kinetic energy = 1/2*m*v^2

The kinetic energy is 4400 joules. The mass is 29 kg. What is the speed

4400 = 1/2*29*v^2

v^2 = 303.44

v=17.42m/s^2

The mass is 18 kg. The velocity is 4.7 m/s. What is the kinetic energy?

KE= 1/2*18*4.7*4.7=198.81J

The maximum range of the water jet is[tex]Rmax = h(sqrt(2)),[/tex] and it is achieved when the height of the hole is [tex]yo = h/2.[/tex]

We can use the equations of motion for an object under constant acceleration to derive the formula for the horizontal distance R that a jet of water will travel before striking the ground. The acceleration of the water jet is due to gravity, and it is constant and equal to the acceleration due to gravity, g.

Let t be the time it takes for the water jet to hit the ground after leaving the hole. We can use the equation of motion for the vertical direction:

[tex]y = yo + voy t - (1/2)gt^2[/tex]

where y is the vertical displacement of the water jet, yo is the initial vertical displacement (the height of the hole from the bottom of the tank), voy is the initial vertical velocity (which is zero), and g is the acceleration due to gravity.

Solving for t, we get:

[tex]t = sqrt((2(yo - y))/g)[/tex]

Now we can use the equation of motion for the horizontal direction:

[tex]x = v_{0} x t[/tex]

where x is the horizontal displacement (which is R), and vox is the initial horizontal velocity (which is constant and equal to the velocity of the water jet as it emerges from the hole).

We can express [tex]v_{0} x[/tex] in terms of the vertical displacement y and the time t:

[tex]v_{0} x = R/t = R(sqrt(g/(2(yo - y))))[/tex]

Substituting for t and simplifying, we get:

[tex]v_{0} x = R(sqrt(2g/h))[/tex]

Now we can express the range R in terms of the tank height h and the height of the hole yo:

[tex]R = (v_{0} x^2/h) = 2h(sqrt(yo/h))[/tex]

To derive the formula for an identical tank on the moon where the acceleration due to gravity is Jm = 1/4 of the acceleration due to gravity on Earth (g), we can substitute g/4 for g in the equation for the horizontal velocity vox. This gives:

[tex]vox = R(sqrt(g/(8h)))[/tex]

Substituting into the equation for R, we get:

[tex]R = (vox^2/h) = 8h(sqrt(yo/h))[/tex]

To show that the maximum range of the water jet is achieved when yo = h/2, we can differentiate R with respect to yo and set the result equal to zero:

[tex]dR/dyo = (4/h)(sqrt(yo/h))(h/2 - yo)[/tex]

Setting this equal to zero and solving for yo, we get:

[tex]yo = h/2[/tex]

To find the maximum range Rmax, we substitute yo = h/2 into the equation for R:

[tex]Rmax = 2h(sqrt(h/2h)) = h(sqrt(2))[/tex]

Therefore, the maximum range of the water jet is [tex]Rmax = h(sqrt(2))[/tex], and it is achieved when the height of the hole is yo = h/2.

Learn more about range, here:

https://brainly.com/question/29897758

#SPJ9

Answer:

Explanation:

edge 2023 b

The Sun appears smaller than the Earth from here on Earth, but that is only because the Earth is considerably closer to you than the Sun is. Jupiter due to its rapid revolution, which increases its diameter in the midsection.

Our solar system consists of the star, Sun, planets: Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune, and small planets such as Pluto.

While the Sun is 150 million kilometers away from where you are, you are on the surface of the Earth.

The planet is an oblate spheroid due to its rapid revolution, which increases its diameter in the midsection.

Therefore, Jupiter due to its rapid revolution increases its diameter in the midsection making it bigger as compared to the world, so it is believed small compared to the Sun and Jupiter.

Learn more about Sun, here:

https://brainly.com/question/2526507

#SPJ9

This is a quote from the novel Song of Solomon which has been authored by Tomi Morrison.

The narrative comes to an ambiguous end with the vision of flying. Readers are left in the dark regarding the fate of Milkman and Guitar even though they both appear to fly in the conclusion. However, Milkman's ability to fly indicates that he has beyond the limitations of his physical form and has a connection to his great-grandfather, Jake, whom he has spent his entire life trying to understand. Despite the fact that Pilate is dead, the book finishes mystically and with a hopeful attitude.

Song of Solomon is a 1977 novel by American author Toni Morrison, her third to be published. It follows the life of Macon "Milkman" Dead III, an African-American man living in Michigan, from birth to adulthood.

Learn more about Toni Morrison here brainly.com/question/30398751

#SPJ4

1.12 MPa is the shear stress in the glued joint.

If you think of an object as a 2D object, its cross section area is one of its areas. Consider a perfectly spherical ball as an illustration. A circle with a radius equal to the ball can be seen if you view the ball as a 2D object. Consider a cone for another illustration.

The axial or normal stress, σ, in the glued joint can be calculated as:

σ = P/A

A = 2 × b × h

A = 2 × 75 mm × 150 mm = 22,500 mm²

Substituting the values of P and A, we get:

σ = 18 kN / 22,500 mm² = 0.8 MPa

So the normal stress in the glued joint is 0.8 MPa.

The shear stress, τ, in the glued joint can be calculated as:

τ = VQ/It

V = P/2 = 9 kN

The first moment of area, Q, can be calculated as:

Q = b×h2/4

When we change the values of b and h, we obtain:

Q = 75 mm × (150 mm)2 / 4 = 1,406,250 mm³

Calculating the second instant of area, I, is as follows:

I = b×h3/12

The result of substituting the values of b and h is:

I = 75 mm × (150 mm)3 / 12 = 1,054,687.5 mm⁴

Substituting the values of V, Q, I, and t, we get:

τ = 9 kN × 1,406,250 mm³/ (1,054,687.5 mm⁴ × 75 mm) = 1.12 MPa

To know more about stress visit:-

https://brainly.com/question/12910262

#SPJ4

The correct answer is e) both b and c.

The quantities that will always be larger for waves on A than for waves on B are the frequency of the first harmonic and the wave velocity.

The frequency of the first harmonic is determined by the tension in the wire. Since A is stretched more tightly than B, the frequency of the first harmonic will be larger for waves on A than for waves on B.

The wave velocity is also determined by the tension in the wire. A higher tension results in a higher wave velocity. Therefore, the wave velocity will also be larger for waves on A than for waves on B.

The amplitude and wavelength of the first harmonic are not affected by the tension in the wire, so they will not be larger for waves on A than for waves on B.

In conclusion, the frequency of the first harmonic and the wave velocity will always be larger for waves on A than for waves on B.

Therefore, the correct answer for quantities that will be larger for waves on A than for waves on B is option e) both b and c.

To know more about frequency, refer here:

https://brainly.com/question/5102661#

#SPJ11

(a) The work done by the 150 N force is given by W = F * d * cos(Θ), where Θ is the angle between the force and displacement vectors and d is the distance over which the force is applied. In this case, the angle is 0° (the force is applied in the same direction as the displacement), so the work done is simply W = F * d = 150 N * 4.80 m = 720 J.

(b) The coefficient of kinetic friction can be calculated using the equation F_friction = μ_k * F_norm, where F_friction is the force of friction, μ_k is the coefficient of kinetic friction, and F_norm is the normal force. The normal force is equal to the weight of the crate, which is given by F_norm = m * g, where m is the mass of the crate and g is the acceleration due to gravity.

So, we have:

F_friction = μ_k * m * g

150 N = μ_k * 42.5 kg * 9.8 m/s^2

Solving for μ_k, we get μ_k = 150 N / (42.5 kg * 9.8 m/s^2) = 0.0313.

2. a) The work done by the force of gravity can be calculated using the formula:

work_gravity = m * g * cos(θ) * d

where m is the mass of the block (4.60 kg), g is the acceleration due to gravity (9.8 m/s^2), θ is the angle of incline (30.0°), and d is the distance traveled (2.40 m).

cos(30°) = 0.866025

work_gravity = 4.60 kg * 9.8 m/s^2 * 0.866025 * 2.40 m = 68.44 J

b) The work done by the friction force can be calculated using the formula:

work_friction = -friction_force * d

where friction_force is the force of friction between the block and incline, which can be calculated as:

friction_force = k * normal_force

where k is the coefficient of kinetic friction (0.436) and normal_force is the normal force exerted on the block, which can be calculated as:

normal_force = m * g * sin(θ)

sin(30°) = 0.5

normal_force = 4.60 kg * 9.8 m/s^2 * 0.5 = 22.47 N

friction_force = 0.436 * 22.47 N = 9.82 N

work_friction = -9.82 N * 2.40 m = -23.58 J

c) The work done by the normal force is zero since the normal force is perpendicular to the direction of motion and does not perform any work.

4. a) The kinetic energy of a particle can be calculated using the formula:

KE = 0.5 * m * v^2

where m is the mass of the particle (0.46 kg) and v is its velocity (5.0 m/s).

KE_A = 0.5 * 0.46 kg * (5.0 m/s)^2 = 12.75 J

b) The kinetic energy of a particle can be used to find its velocity using the formula:

KE = 0.5 * m * v^2

Rearranging this equation to solve for velocity:

v = sqrt(2 * KE / m)

v_B = sqrt(2 * 8.5 J / 0.46 kg) = 4.76 m/s

c) The work done on the particle as it moves from A to B can be calculated as the change in its kinetic energy:

work = ΔKE = KE_B - KE_A = 8.5 J - 12.75 J = -4.25 J

4. a) The kinetic energy of a particle can be calculated using the formula:

KE = 0.5 * m * v^2

where m is the mass of the particle (0.46 kg) and v is its velocity (5.0 m/s).

KE_A = 0.5 * 0.46 kg * (5.0 m/s)^2 = 12.75 J

b) The kinetic energy of a particle can be used to find its velocity using the formula:

KE = 0.5 * m * v^2

Rearranging this equation to solve for velocity:

v = sqrt(2 * KE / m)

v_B = sqrt(2 * 8.5 J / 0.46 kg) = 4.76 m/s

c) The work done on the particle as it moves from A to B can be calculated as the change in its kinetic energy:

work = ΔKE = KE_B - KE_A = 8.5 J - 12.75 J = -4.25 J

The negative sign indicates that the work done on the particle was done against its motion, decreasing its kinetic energy.

5. a) The net force on the crate can be found by considering the horizontal forces acting on it. These forces include the applied force F_applied and the frictional force F_friction:

F_friction = friction_coefficient * normal_force

where friction_coefficient is the coefficient of kinetic friction (0.350) and normal_force is the normal force acting on the crate, which can be calculated as:

normal_force = m * g

where m is the mass of the crate (92.0 kg) and g is the acceleration due to gravity (9.8 m/s^2).

normal_force = 92.0 kg * 9.8 m/s^2 = 903.6 N

F_friction = 0.350 * 903.6 N = 317.3 N

The net force is given by:

F_net = F_applied - F_friction = 289 N - 317.3 N = -28.3 N

The negative sign indicates that the net force is in the direction opposite to the direction of the applied force, i.e., to the left.

b) The net work done on the crate can be calculated using the formula:

work = force * distance * cos(θ)

where force is the net force on the crate (-28.3 N), distance is the distance traveled along the rough surface (0.65 m), and θ is the angle between the net force and the direction of motion, which is 0° since the net force and the displacement are in opposite directions.

work = -28.3 N * 0.65 m * cos(0°) = -18.4 J

c) The final kinetic energy of the crate can be calculated using the formula:

KE_final = KE_initial + work

where KE_initial is the initial kinetic energy of the crate, which can be calculated as:

KE_initial = 0.5 * m * v^2

KE_initial = 0.5 * 92.0 kg * (0.870 m/s)^2 = 6.66 J

KE_final = 6.66 J - 18.4 J = -11.7 J

learn more about kinetic energy: https://brainly.com/question/8101588

#SPJ1

In the centre of- mass (CM) frame, the energies of the two decay products are:

[tex]$$ E_1 = \frac{(m-m_2)^2 - p^2}{2m_1}c^2 $$[/tex]

[tex]$$ E_2 = \frac{(m-m_1)^2 - p^2}{2m_2}c^2 $$[/tex]

The momenta of the two decay products are:

[tex]$$ p_1 = \frac{\sqrt{(m^4 - 2m^2(m_1^2+m_2^2) + (m_1^2-m_2^2)^2)}}{2m c} $$[/tex]

[tex]$$ p_2 = -p_1 $$[/tex]

The centre of mass (CM) is a point that represents the average position of mass in a system. In a system of particles, the CM is the point where the weighted average position of all the particles is located. It is a useful concept in physics and engineering because it allows us to simplify calculations of the motion and interactions of the system as a whole.

In the context of particle physics, the CM frame is a reference frame in which the total momentum of a system of particles is zero. This means that the particles are moving with equal and opposite momenta in this frame, and it simplifies the analysis of the system, allowing us to study its properties and interactions. The CM frame is often used in particle accelerators, where high-energy collisions between particles can produce a large number of new particles that move in various directions.

Let the initial particle of mass [tex]$m$[/tex] be at rest in the CM frame. After decay, the two particles will move in opposite directions, each with momentum [tex]$p$[/tex]The total energy of the system is conserved, and it is given by the sum of the energies of the two particles:

[tex]$$ E = E_1 + E_2 $$[/tex]

where[tex]$E_1$[/tex]and [tex]$E_2$[/tex]the energies of the two particles.

The total energy [tex]$E$[/tex] of the system is given by:

[tex]$$ E = \sqrt{(mc^2)^2 + (pc)^2} $$[/tex]

where [tex]$c$[/tex] is the speed of light.

Since the particles are moving in opposite directions, their momenta are equal in magnitude but opposite in direction, i.e., [tex]$p_1 = -p_2 = p$[/tex]. The energies of the particles can be found using the following expression:

[tex]$$ E_i = \sqrt{(m_ic^2)^2 + (p_ic)^2} $$[/tex]

where [tex]$i$[/tex] is the particle index.

Substituting[tex]$p_1 = -p_2 = p$ and $E = E_1 + E_2$[/tex] in the above equations, we get:

[tex]$$ E_1 = \frac{m_1^2c^4 + p^2c^2}{2m_1c^2} $$[/tex]

[tex]$$ E_2 = \frac{m_2^2c^4 + p^2c^2}{2m_2c^2} $$[/tex]

Solving for [tex]$p$[/tex]

[tex]$$ p = \frac{\sqrt{(E^2 - (m_1c^2 + m_2c^2)^2)(E^2 - (m_1c^2 - m_2c^2)^2)}}{2Ec} $$[/tex]

The momenta of the two particles in the CM frame are given by:

[tex]$$ p_1 = \frac{\sqrt{(E^2 - (m_1c^2 + m_2c^2)^2)}}{2c} $$[/tex]

[tex]$$ p_2 = \frac{\sqrt{(E^2 - (m_1c^2 - m_2c^2)^2)}}{2c} $$[/tex]

To know more about Centre of mass(CM), visit:

https://brainly.com/question/28021242

#SPJ4

(a) The total acceleration of the car in xy components is 16.73 m/s^2.

(b) The linear velocity of the car in xy components is 33.3 m/s.

To find the total acceleration of the car in xy components, we need to find the sum of the centripetal and tangential accelerations.

The centripetal acceleration is given by a = v^2/r

where;

At point P, the velocity of the car is 120 km/h = 33.33 m/s. Therefore, the centripetal acceleration is:

a_c = v^2/r

a_c = (33.33 m/s)^2 / 70 m

a_c = 15.88 m/s^2

The tangential acceleration is given by a_t = dv/dt

where;

v is the velocity of the car and

t is time

The rate of change of velocity is given as 5 m/s^2. Therefore, the tangential acceleration is:

a_t = 5 m/s^2

The total acceleration of the car in xy components is the vector sum of a_c and a_t. Since the two accelerations are perpendicular, we can use the Pythagorean theorem to find the magnitude of the total acceleration:

a_total = √(a_c^2 + a_t^2)

a = √((15.88 m/s^2)^2 + (5 m/s^2)^2)

a = 16.73 m/s^2

(b) The linear velocity of the car in xy components can be found using the formula;

v = rω

where;

The angular velocity is related to the linear velocity by the formula ω = v/r. At point P, the linear velocity of the car is 33.33 m/s. Therefore, the angular velocity is:

ω = v/r = 33.33 m/s / 70 m

ω = 0.476 rad/s

The linear velocity in the x-direction is v_x = v cos(θ),

where;

Since the car is entering the circular portion of the track, the angle θ is 0. Therefore, v_x = v cos(0) = 33.33 m/s.

The linear velocity in the y-direction is v_y = v sin(θ). Since the car is entering the circular portion of the track, the angle θ is 90 degrees. Therefore, v_y = v sin(90°) = 33.33 m/s.

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

Range of values for given condition will depend on magnitude and directions of the three given forces. [tex]|R| < = 2400 N[/tex]

To find the range of values for the magnitude of force P so that the resultant of the three forces does not exceed 2400 N, find magnitude and direction.

We can do this by using vector addition. Adding the three forces together, we get:

R = F1 + F2 + F3

where F1, F2, and F3 are the magnitudes and directions of the three given forces, and R: magnitude with resultant force direction.

To ensure that the resultant force does not exceed 2400 N, we must have:

|R| <= 2400 N

Therefore, we need to find the range of values for the magnitude of force P that satisfy this inequality.

The magnitudes and directions of the three given forces are not specified in the problem, so we cannot provide a specific numerical answer. However, we can provide a general method for solving the problem.

To find the range of values for the magnitude of force P, we can first find the maximum and minimum values of the magnitude of the resultant force for different values of P. We can then find the range of values of P that satisfy the inequality above.

This can be done numerically by using vector addition and trigonometry to find the magnitude and direction of the resultant force for different values of P. Alternatively, we can use graphical methods such as force polygons or vector diagrams to visualize the resultant force and find the range of values of P that satisfy the inequality.

Learn more about magnitude here:

https://brainly.com/question/30683294

#SPJ4

In order to reach the fishing boat in the smallest amount of time and distance, the speedboat's pilot should point it 15.0 + 13.7 = 28.7° east of true north from the lighthouse.

Typically speaking, if I see the initial line of sight from the lighthouse as being straight north, this is the simplest for me to solve.

The fishing vessel is thus traveling 40.0 – 15.0 = 25.0° east of north.

The fishing boat's eastward speed is 29.0sin25.0, or 12.3 kilometers per hour.

The fishing boat's northward speed is 29.0cos25.0, or 26.3 kilometers per hour.

If the speedboat matches the fishing boat's eastward speed such that the two boats stay on a line that is exactly north/south of one another, the speedboat will go the smallest distance in the quickest time.

The speedboat makes northward progress at

√(52.0² - 12.3²) = 53.4 km/hr

The net northward speed difference is

53.4 – 26.3 = 27.1 km/hr

so the gap between them closes in

16 km/27.1km/hr = 0.6 hr (or 36 min)

The speed boat will be traveling in the direction θ to the right of our artificial north

sinθ = 12.3/52.0

θ = 13.7°

Read more about speed

https://brainly.com/question/28224010

#SPJ1

To calculate the velocity of a spherical raindrop falling from 4.4 km without air drag, we can use the equations of motion:

v² = u² + 2as

v² = 0 + 2(-9.81 m/s²)(4.4 km) = -2(9.81 m/s²)(4400 m) = -86,140 m²/s²

v = sqrt(86,140 m²/s²) = 293.9 m/s

Therefore, the velocity of the raindrop falling from 4.4 km without air drag is approximately 293.9 m/s.

b. To calculate the velocity of the raindrop falling with air drag, we can use the following equation:

F_drag = 1/2 * rho * v^2 * A * C_d

F_drag = m * g

m * g = 1/2 * rho * v^2 * A * C_d

Solving for v, we get:

v = sqrt((2 * m * g) / (rho * A * C_d))

Substituting the values, we get:

v = sqrt((2 * (4/3) * pi * (3.8/2)^3 * 1000 kg/m³ * 9.81 m/s²) / (1.16 kg/m³ * pi * (3.8/2)^2 * 1.0))

Simplifying, we get:

v = 9.7 m/s

Therefore, the velocity of the raindrop falling from 4.4 km with air drag is approximately 9.7 m/s.

To know more about velocity , check out :

https://brainly.com/question/80295?source=archive

#SPJ4

Electric force by one sphere on other is [tex]-4.80 * 10^(-3) N[/tex] and after they have come to equilibrium is [tex]1.08 * (10^-3) N[/tex]

(a) The electric force exerted by one sphere on the other can be calculated using Coulomb's law:

F = k * (q1 * q2) / r^2

where F is the force, k is Coulomb's constant (9.0 x 10^9 Nm^2/C^2), q1 and q2 are the charges on the two spheres (12.0nC and -18.0nC), and r is the distance between their centers (0.300m).

Plugging in the values, we get:

F = 9.0 x 10^9 * (12.0 x 10^-9) * (-18.0 x 10^-9) / (0.300)^2 = -4.80 x 10^-3 N

The negative sign indicates that the force is attractive.

(b) When the spheres are connected by a conducting wire, they will share charge until they reach equilibrium. At equilibrium, the net force on each sphere will be zero. The electric force each sphere exerts on the other will be the same in magnitude, but opposite in direction.

To find the magnitude of the force, we can use the fact that the potential of each sphere will be the same at equilibrium. The potential can be calculated using:

V = k * q / r

where V is the potential, k is Coulomb's constant, q is the charge on the sphere, and r is the distance from the sphere's center.

At equilibrium, the potential of each sphere will be the same, so:

k * q1 / r1 = k * q2 / r2

Solving for q1 and q2, we get:

q1 = -q2 * r1 / r2

Plugging in the values, we get:

q1 =[tex]-(-18.0 * 10^(-9)) * 0.150m / 0.150m = 18.0 * 10^(-9) C[/tex]

q2 = -q1 = [tex]-18.0 * 10^-(9) C[/tex]

The electric force each sphere exerts on the other can be calculated using Coulomb's law with the new charges:

F = k * (q1 * q2) / r^2

Plugging in the values, we get:

F =[tex]9.0 * 10^(-9) * (18.0 * 10^(-9)^2 / (0.300)^2 = 1.08 * 10^(-3) N[/tex]

Learn more about electric force here:
https://brainly.com/question/2526815

#SPJ4

When the liquid cools down, it loses heat energy.

As the liquid cools, it loses heat energy. As a result, its particles slow down in movement and come closer to one another. Attractive forces begin to hold particles and the crystals of a solid form.

If water is cooled, it can change into ice. If ice is warmed, it can change into a liquid state. Heating a substance makes the molecules move very fast whereas cooling a substance makes the molecules move very slowly.

Heating a liquid increases the speed of the molecules present in it. An increase in the molecule's speed competes with the attraction between molecules and results in the molecules moving apart whereas Cooling a liquid decreases the movement of the molecules.

So we can conclude that the liquid cools down when it loses heat energy.

Learn more about physical properties here: https://brainly.com/question/12330204

#SPJ1

Answer:

Below

Explanation:

Find time of first stone to strike water ....second stone take 1 s less

First stone

d = 1/2 a t^2

43.9 = 1/2 (9.81)(t^2)   shows  t = ~ 3 seconds

Second stone

d = vo t + 1/2 a t^2

43.9 = vo (t) + 1/2 (9.81) t^2       t = 3 -1 = 2 seconds

43.9 = vo (2) + 4.905 (2)^2

   shows vo = 12.1 m/s

If half of the heat generated goes into warming the ball then the

temperature increase of the ball into 0.71°C

Conservation of energy: ball is dropped (Vinitial=0, KE=0) so Energy at top is PE=mgh.

This will be the same amount used to generate heat.

1/2E=1/2 mgh=1/215 kg 9.8 m/s²

m =.5159.8J

H=1/2E=cmT

.5159.8J=450 J/kgC 15kg T

T=.5159.8J / (450 J/kgoC 15kg) =.5159.8/(450*15)°C

potential energy U = m*g*h

heat = U/2

m*c * delta _T = m*g*h/2

delta_T = m*g*h/2*m*c

delta_T = g*h / 2C

delta_T = 9.8*150 / 2*450

delta_T = 1.63 degrees

What is energy?

To know more about energy, click the link given below:

https://brainly.com/question/1932868

#SPJ1

The force of 15 lbs in the direction of (4,1) is: 41.3 ft-lb.

The work done by a force of 15lbs moving an object from (0,0) to (3,0) in the direction of (4,1) is given by the formula:

W = Fdcos(θ), where F is the force, d is the distance, and θ is the angle between the force and the direction of motion.

In this case, θ = arctan(1/4) = 14.036 degrees, so the work done is W = 153cos(14.036) = 41.3 ft-lb.

Force is a physical quantity that is defined as the rate of change of momentum. It is a vector, meaning that it has both magnitude and direction. Force is usually represented by the symbol F and is measured in newtons (N).

Learn more about Force:

https://brainly.com/question/12785175

#SPJ4

The statement consistent with the first law of thermodynamics is the internal energy of the gas will increase. Option a is correct.

The statement consistent with the first law of thermodynamics is (a) The internal energy of the gas will increase. This is because the work done on the gas is being converted into an increase in internal energy.

Option (b) (c) The internal energy of the gas will decrease, or will not change is incorrect, because work is being done on the gas which will increase its internal energy.

Option (d) does not address the fact that work is being done on the gas, which is also contributing to changes in its internal energy.

To know more about the internal energy, here

https://brainly.com/question/1581254

#SPJ4

It will take about 233.34 seconds for the hot dog cooker to raise the temperature of the hot dog from 20∘C to 85∘C.

Specific heat is the amount of heat energy required to raise the temperature of a substance by one degree Celsius or one Kelvin per unit mass.

Here,
To solve this problem, we can use the formula for the amount of heat required to change the temperature of an object,

Q = mcΔT

First, we need to calculate the amount of heat required to raise the temperature of the hot dog from 20∘C to 85∘C:

Q = (0.07 kg)(2500 J/kg⋅K)(85∘C - 20∘C)

Q = 1058.5 J

Next, we can use the formula for electrical power,

P = IV

We can rearrange this formula to solve for the current:

I = P/V

The power required to heat the hot dog can be calculated using the formula for electrical power:

P = V²/R

Substituting the given values, we get:

P = (120 V)²/160 Ω

P = 90 W

I = 90 W/120 V

I = 0.75 A

Finally, we can use the formula for the amount of time required to transfer a certain amount of heat:

t = Q/(IΔT)

Substituting the values we calculated, we get:

t = 1058.5 J/(0.75 A)(65∘C)

t = 233.34 s

Therefore, it will take about 233.34 seconds for the hot dog cooker to raise the temperature of the hot dog from 20∘C to 85∘C.

Learn more about specific heat here:

https://brainly.com/question/11297584

#SPJ1

The relationship between the decay constant ahd half life of the radioactive isotope is given as :

So putting all the values , we get :

4.63 x 10-2 = 0.693 / (t1/2)

t1/2 = 14.97 hr

So the half life of sodium - 24 is 14.97 hours.

What is radioisotopes ?

a chemical element in an unstable state that emits radiation as it decomposes and becomes more stable. Radioisotopes can be created in a lab or in the natural world. They are utilised in imaging studies and therapy in medicine. likewise known as radioisotopes.

Hence 14.97 hours is a correct answer.

To know more about  sodium-24 follow link

https://brainly.com/question/15904050

#SPJ1

The organic compounds in the homologous series have similar chemical properties. The simplest example of homologous series is the first four hydrocarbons; methane, ethane, propane and butane.

The homologous series is known as the group of organic compounds that differ from each other by a methylene group. They are series of compounds with the same functional group and similar chemical properties.

The compounds of carbon in homologous series have different number of carbon atoms. But they contain the same functional group. Alkanes, alkenes and alkynes form the homologous series.

Thus all the alkanes, alkenes and alkynes form homologous series.

To know more about  homologous series, visit;

https://brainly.com/question/1569487

#SPJ1

The voltage across the element is 24 V where if the energy absorbed by the element is 120 j.

Given data as per the question:

Charges = 5 coulomb

Energy absorbed by the element = 120 J

As per the formula we have,

Energy = Voltage X Charge

120= Voltage X 5

Voltage = 120/5 = 24 V

The voltage in the whole process will be negative because the energy is absorbed.

In a series circuit, the current is the same for all the components. While the circuit reaches its steady state, the capacitor charges and the voltage across its plates increases until it reaches the one on the terminals, and at that point it is in the steady state.

Learn more about Voltage:

brainly.com/question/12017821

#SPJ4

If the energy absorbed by the element is 120 j, So 5*V1 =120 , V1 =24 Volts.

The voltage distinction be V1 Volts.

When 5C of charge moves from A to B, its energy increments by 120J.

So 5*V1 =120

V1 =24 Volts.

The voltage distinction is hence 24 Volts.

At the point when the charge moves from higher potential to lower, it loses energy and when it moves from lower potential to higher, it retains energy. The energy ingested (or lost) is relative to the potential (voltage) contrast between the two focuses.

The voltage in the entire cycle will be negative in light of the fact that the energy is retained.

In a series circuit, the current is no different for every one of the parts. While the circuit arrives at its consistent express, the capacitor charges and the voltage across its plates increments until it arrives at the one on the terminals, and by then it is in the consistent state.

to know more about voltage click here:

https://brainly.com/question/1176850

#SPJ4

The volume of the reaction flask would be needed to calculate the rate in units of concentration per time. Option d is correct.

Reaction rates are usually expressed as the concentration of reactant consumed or the concentration of product formed per unit time. The units are thus moles per liter per unit time, written as M/s, M/min, or M/h.

Chemists start a reaction, measure the reactant or product concentration at various points as the reaction advances, and maybe display the concentration as a function of time on a graph. Then they compute the change in concentration per unit time.

The volume of the reaction flask is required to know the concentration of the solution. Thus the rate.

To know more about the Reaction rates, here

brainly.com/question/497987

#SPJ4

--The complete question is, Which of the following would be needed to calculate the rate in units of concentration per time?

a. the pressure of the gas at each time

b. the molecular weight of a

c. the temperature

d. the volume of the reaction flask--