a 1540-kg parked truck has a wheel base of 3.13 m (this is the distance between the front and rear axles). the center of mass of the truck is 1.3 m behind the front axle. (a) what is the force exerted by the ground on each of the front wheels? [4000,5000] n (b) what is the force exerted by the ground on each of the back wheels? [3000,4000] n hint: this is a chapter 12 equilibrium problem. remember that the truck has four wheels, not just the two you can see in the drawing.

Given,F1 = 20 kN Reaction at Pin A is represented as FAB, and the reaction at Pin D is represented as FDC. Let the angle between AB and the horizontal be θ.

Let the angle between CD and the horizontal be φ.Resolution of Force F1:Let the x-component of the reaction at Pin A be FABx and the y-component be FABy. Thus, from the force balance equation, we get,∑F_x = FABx + FDCx = 0⇒ FABx = -FDCxAlso, ∑F_y = FABy + FDCy = F1 = 20kNAs the beam is in equilibrium,∑M_{D} = FABy . AD - FDCy . DC = 0This is the moment balance equation of the beam. We can solve for either FAB or FDC using these two equations, as the magnitude of the forces will be the same.Resolution of forces at Pin A:For forces at Pin A, we use scalar notation.∑F_x = F_{ABx} = 0As there is no external force in the x direction, FABx is 0.∑F_y = F_{ABy} - F1 = 0Hence, the y-component of the reaction at Pin A is FABy = F1 = 20kN.Resolution of forces at Pin D:For forces at Pin D, we use scalar notation.∑F_x = F_{DCx} = 0As there is no external force in the x direction, FDCx is 0.∑F_y = F_{DCy} - F1 = 0Hence, the y-component of the reaction at Pin D is FDCy = F1 = 20kN.Thus, the x-component of the reaction at Pin A and Pin D is 0, and the y-component of the reaction at Pin A and Pin D is 20 kN.

for more such questions on angle .

https://brainly.com/question/29506154

#SPJ11

The principle that best describes the motion of the stuffed animal as the car accelerated is inertia.

Inertia is a property of matter that describes the resistance of an object to changes in its state of motion. An object will stay at rest or continue moving in a straight line at a constant speed if no external force acts upon it. This property of matter is referred to as inertia.

The stuffed animal in the scenario experienced the effects of inertia. The stuffed animal was at rest on the dashboard, and when the car accelerated quickly, the stuffed animal had a tendency to remain at rest due to its inertia. This resistance to a change in motion led to the stuffed animal being propelled backward and off the dashboard and onto the seat.

The principle that best describes the motion of the stuffed animal as the car accelerated is inertia. The stuffed animal had a tendency to remain at rest due to its inertia. This resistance to a change in motion led to the stuffed animal being propelled backward and off the dashboard and onto the seat.

Learn more about inertia:

https://brainly.com/question/1830739

#SPJ11

The speed of sound is found out to be 349.4 ms⁻¹ from the frequency of the seventh resonance heard when the water level is 217.75 cm below the top of the tube.

Frequency of wave:

v = nλ

where, v = speed of sound, n = frequency, λ = wavelength

Speed of sound:

v = frequency n × wavelength λ

Frequency, n = v/λ

Wavelength, λ = v/n

The 7th resonance frequency of the tuning fork is given by:

n = 7 × f

where, f is the frequency of the tuning fork

Speed of sound, v = nλ

Speed of sound, v = 7fλ

Speed of sound, v = 7 × 256 Hz × λ

λ = 1.3671 m

Distance travelled by the sound wave in the water column is L = h + l

where, h = length of the air column and l = length of water column where the resonance was heard.

L = h + l

L = 217.75 cm + 50 cm

L = 267.75 cm = 2.6775 m

Length of the air column, h = L - l

where, l = length of water column where the resonance was heard.

h = 2.6775 m - 0.5 m

h = 2.1775 m

Wavelength of sound wave in air column, λ₁ = 4h

λ₁ = 4 × 2.1775 m

λ₁ = 8.71 m

Frequency of the sound wave in air column is given by:

n = v/λ₁

n = 349.4 ms⁻¹ / 8.71 m

n = 40.112 Hz

The 7th resonance frequency of the tuning fork is given by:

n = 7 × f

40.112 Hz = 7 × f

Frequency of the tuning fork, f = 5.73 Hz.

Learn more about Frequency here:

https://brainly.com/question/14316711

#SPJ11

Nuclear reactors have three separate water loops instead of just a single one that runs from the water source, through the reactor, then back to the cooling tower because the water running through the reactor is highly radioactive.

A nuclear reactor is a device that controls and maintains a sustained nuclear chain reaction for the purpose of generating heat or power, as well as the materials that make up a nuclear reactor.

The water running through the reactor is highly radioactive, which means that it cannot be released into the atmosphere or allowed to come into touch with humans or the environment. As a result, nuclear reactors are designed with three separate water loops.

In summary, nuclear reactors have three separate water loops instead of a single one that runs from the water source, through the reactor, and back to the cooling tower because the water running through the reactor is highly radioactive.

Learn more about nuclear power: https://brainly.com/question/29472057

#SPJ11

The electric field at a distance r from the center of a sphere of total charge Q is given by E=Q/(4πε0r^2). Calculate the radius of the earth R = 6.37 x 10^6 m2. Determine the volume of the earth V = (4/3)πR^33. Use the density of the earth, 5.5 g/cm3 to determine the mass of the earth m = density x volume4. Calculate the total charge of the earth Q = E x 4πε0R^2 Where,ε0 = permittivity of free spaceε0 = 8.85 x 10^-12 C^2 / Nm^2(a) The radius of the earth, R is;R = 6.37 x 10^6 m(b) Volume of the earth, V is;V = (4/3)πR^3= (4/3)π(6.37 x 10^6)^3= 1.086 x 10^21 m^3(c) Mass of the earth, m is;m = density x volume= 5.5 g/cm^3 × 1.086 x 10^21 m^3 × (10^3 cm/m)^3= 5.98 x 10^24 kg(d) Total charge of the earth, Q is;Q = E x 4πε0R^2= 100 (V/m) × 4π(8.85 × 10^-12 C^2/Nm^2) × (6.37 × 10^6 m)^2= 8.86 × 10^11 C.

Therefore, the total charge of the earth is 8.86 × 10^11 C.

For more information regarding this topic, you can click the below link

https://brainly.com/question/19878202

#SPJ11

This means that the maximum magnitude of the magnetic force the electron can experience in this situation is 6.17 x 10-14 N.

The maximum magnitude of the magnetic force that an electron can experience when accelerated through 1.65 103 V from rest and entering a uniform 2.80-T magnetic field can be calculated using the equation F=q(v X B), where F is the force, q is the charge of the electron, v is its velocity, and B is the magnetic field.

Using the equation above, we can calculate the maximum magnitude of the magnetic force as F=1.6 x 10-19C(1.65 x 103 m/s x 2.8T)=6.17 x 10-14 N.

for such more questions on  magnetic field

https://brainly.com/question/26257705

#SPJ11

Therefore, the magnetic field at the center of the arc is 1.005 × 10^-5 T.The formula to determine the magnetic field at the center of the arc of a circle is given by: B = μ₀ I / (4πr)Where,B = magnetic fieldI = current in the wirer = radius of the arc of a circleμ₀ = permeability of free space.

Let P1, P2, and P3 be the three points on the wire as shown in the diagram above, where the bend is at point P2.

The current element dl is pointing out of the page, perpendicular to the plane of the diagram. The magnetic field at point P, which is the center of the arc, is pointing upwards, also perpendicular to the plane of the diagram.

Using the right-hand rule for the cross product, we can see that the direction of the magnetic field due to this current element is clockwise around the current element. Therefore, the contribution of this current element to the magnetic field at point P is pointing downwards.

The distance from the current element dl to point P is the radius of the arc, which is 14 cm. Therefore, we can write:

dB = (μ₀/4π) * (I dl / r²)

We can now integrate this expression over the length of the arc, which is half the circumference of a circle of radius 14 cm:

B = 2 * ∫[0,π] dB = 2 * ∫[0,π] (μ₀/4π) * (I dl / r²)

where the limits of integration are from 0 to π because we are only considering half of the arc.

Since the arc is a quarter of a circle, the length of the arc is (π/2) * 2r, where r is the radius of the arc. Therefore, we can write:

dl = (π/2) * 2r * dθ

where dθ is a small angle element. Substituting this into the integral, we get:

B = 2 * ∫[0,π] (μ₀/4π) * (I (π/2) * 2r * dθ / r²)

Simplifying, we get:

B = (μ₀I/4) * ∫[0,π] dθ

Integrating, we get:

B = (μ₀I/4) * [π - 0]

Finally, substituting the values, we get:

B = (4π × 10^-7 T m/A × 32 A/4) * π

B = 1.005 × 10^-5 T

Therefore, the magnetic field at the center of the arc is 1.005 × 10^-5 T.

For such more questions on magnetic field

https://brainly.com/question/13689629

#SPJ11

The maximum height (h) of the jump is 12.22 m above the end of the ramp.

The man on the motorcycle plans to make a jump with an initial speed of 33.0 m/s and a final speed of 31.5 m/s. The maximum height (h) of the jump can be calculated using the following equation:

h = (vi2 - vf2) / (2g)

where

Plugging in the given values, we get:

h = (33.02 - 31.52) / (2 x 9.81)
h = 12.22 m

Therefore, the maximum height (h) of the jump is 12.22 m above the end of the ramp.

Learn more about maximum height: brainly.com/question/28060976

#SPJ11

When a tree is planted in an orchard, the tree's height increases by 8% every year. The height of the tree is 78 cm when it is planted.

The correct formula that can be used to calculate the height of the tree years after planting is:

[tex]h = 78(1.08)^t[/tex]

where "h" represents the height of the tree after "t" years of planting, and 1.08 is the growth factor that takes into account the 8 percent increase in height each year.

To use the formula, simply substitute the value of "t" with the number of years since planting, and then evaluate the expression to get the height of the tree in centimeters. For example, after 5 years, the height of the tree would be:

[tex]h = 78(1.08)^5[/tex]

h = 114.60 cm

Learn more about percent:

https://brainly.com/question/24877689

#SPJ11

Answer:

An atom is the smallest unit of matter that retains the chemical properties of an element. Atoms are composed of a central nucleus, which contains protons and neutrons, surrounded by a cloud of negatively charged electrons.

The idea of the atom has been around for centuries, but it was not until the late 19th and early 20th centuries that scientists began to understand its structure. Some of the scientists involved in the discovery of the atom include:

John Dalton (1766-1844) - Dalton proposed the atomic theory, which stated that all matter is composed of small, indivisible particles called atoms.

J.J. Thomson (1856-1940) - Thomson discovered the electron and proposed the "plum pudding" model of the atom, in which electrons are embedded in a positively charged sphere.

Ernest Rutherford (1871-1937) - Rutherford conducted the gold foil experiment, which led to the discovery of the nucleus and the proposal of the nuclear model of the atom.

Niels Bohr (1885-1962) - Bohr proposed the planetary model of the atom, in which electrons orbit the nucleus in discrete energy levels.

The particles that atoms are composed of are protons, neutrons, and electrons. Protons have a positive charge and are located in the nucleus, while neutrons have no charge and are also located in the nucleus. Electrons have a negative charge and orbit the nucleus in shells or energy levels.

Explanation:

ABOVE

The correct order of electromagnetic waves from longer wavelength to shorter wavelength are D) radio waves, microwaves, infrared, visible, ultraviolet, x-rays, and gamma rays. Therefore, the correct option is D.

The electromagnetic spectrum includes the entire range of electromagnetic radiation. This range is divided into seven main categories depending on their wavelength and frequency. These categories are radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays.

Radio waves: These are the longest wavelengths and the lowest frequency in the electromagnetic spectrum. Radio waves have a frequency of fewer than 300 GHz and wavelengths ranging from a few centimeters to a few kilometers.

Microwaves: These waves are next in order of wavelength after radio waves. The microwave wavelength ranges from a few millimeters to a few centimeters. Microwaves are used in many applications like communication, heating food, and radar systems.

Infrared: The wavelength of infrared radiation ranges from 700 nm to 1 mm. Infrared radiation is used in many applications like heating, remote temperature sensing, and security systems.

Visible Light: It is a part of the electromagnetic spectrum that is visible to the human eye. The wavelength of visible light ranges from 400 to 700 nm. The color of light changes depending on the wavelength.

Ultraviolet: Ultraviolet light has a wavelength ranging from 10 nm to 400 nm. UV light is harmful to living organisms and can cause skin cancer, eye damage, and premature aging.

X-rays: X-rays have a wavelength ranging from 0.01 nm to 10 nm. They are used in medicine and industry to produce images of the internal structures of objects.

Gamma rays: They are the most energetic waves in the electromagnetic spectrum. Gamma rays have the shortest wavelengths and the highest frequencies. They are produced by nuclear explosions, radioactive decay, and nuclear reactions.

To learn more about "electromagnetic waves", visit: https://brainly.com/question/31138669

#SPJ11

Suppose two rings are at the top of a ramp. The rings have the same mass, but one ring has a much larger radius than the other. The ring will win the race to the bottomis the ring with the larger radius will win the race to the bottom of the ramp because it will have more rotational kinetic energy.

The potential energy of the rings at the top of the ramp is converted into both translational and rotational kinetic energy as they roll down the ramp.At the top of the ramp, both rings have the same potential energy. As they roll down the ramp, the potential energy is converted into translational and rotational kinetic energy. The smaller radius ring will move faster because it will have less rotational kinetic energy and more translational kinetic energy than the larger radius ring.

Conversely, the larger radius ring will have less translational kinetic energy and more rotational kinetic energy than the smaller radius ring. Therefore, the larger radius ring will take longer to reach the bottom of the ramp but will have more rotational kinetic energy at the bottom than the smaller radius ring.

Learn more about kinetic energy at:

https://brainly.com/question/22174271

#SPJ11

The point on the x-axis between the two charges where the electric field is zero is 0.747 m, when the charges -2.1 μC and -5.6 μC are located at (-0.50 m , 0) and (0.50 m , 0), respectively.

An electric field is defined as the electric force per unit charge. It is a field of force surrounding electrically charged particles, such as electrons or protons in motion, that exerts force on surrounding matter. It is represented by the symbol E.

The electric field E at any point (x,y) on the x-axis due to the charge Q1 at (-0.50 m, 0) is

[tex]E1 = k * Q1 / r1^2[/tex]

where, k = Coulomb's constant = [tex]9 x 10^9 Nm^2/C^2[/tex]

Q1 = charge = -2.1 μC

r1 = distance between Q1 and

(x,y) = (0.50 + x) m

The electric field E at any point (x,y) on the x-axis due to the charge Q2 at (0.50 m, 0) is

[tex]E2 = k * Q2 / r2^2[/tex]

where,

Q2 = charge = -5.6 μC

r2 = distance between Q2 and (x,y) = (0.50 - x) m

The total electric field E at any point (x,y) on the x-axis due to both the charges is

[tex]E = E1 + E2 = k * Q1 / r1^2 + k * Q2 / r2^2[/tex]

[tex]E = k * (-2.1 * 10^-6) / (0.5 + x)^2 + k * (-5.6 * 10^-6) / (0.5 - x)^2[/tex]

At the point on the x-axis between the two charges where the electric field is zero,

[tex]E = 0k * (-2.1 * 10^-6) / (0.5 + x)^2 + k * (-5.6 * 10^-6) / (0.5 - x)^2 = 0[/tex]

Simplifying, we get [tex](0.5 + x)^2 / (0.5 - x)^2 = 2.667x^2 + 2.667x - 0.50 = 0[/tex]

Solving for x, we get

x = -1.74 m or

x = 0.747 m

We cannot have a negative value of x as the point has to be between the two charges. So, the location of the point where the electric field is zero is x = 0.747 m.

Learn more about electric field: https://brainly.com/question/14372859

#SPJ11

Leaning back in a chair shifts your center of mass outside the base of support and creates a turning force around the pivot point of the two back legs, which can cause the chair to tip over.

When you lean back in a chair, your body's weight creates a turning force, or torque, around the pivot point formed by the two back legs of the chair. This torque tends to rotate your body further back, causing the chair to tip over if the force becomes too great. To maintain stability, you need to apply a counter-torque by shifting your center of mass back over the base of support.

What is turning force?

Turning force, also known as torque, is a force that causes an object to rotate around a fixed axis or pivot point. It is a product of a force acting on a lever arm (the perpendicular distance between the force's line of action and the pivot point).

What is pivot point?

A pivot point, also known as a fulcrum, is a fixed point around which a lever or other object is able to rotate or pivot. It is the point on which the object balances and rotates.

To know more about pivot point, visit:

https://brainly.com/question/29606651

#SPJ1

When the 35.0-g bullet moving at 475 m/s strikes the 4.4-kg bag of flour, the momentum of the bullet is transferred to the bag of flour, causing the bag of flour to move and the bag moving when the bullet exits at 91.3 m/s.

We can calculate the velocity of the bag of flour after the collision using conservation of momentum:

Here we have the following data as :

Momentum of bullet before collision = Momentum of bullet and bag after collision

m bullet × v bullet, before = (m bullet + m bag) bag × v bag, after

We can solve for v bag ,after:

v bag ,after = (m bullet × v bullet, before) / (m bullet + m bag)

v bag, after = (35.0 g × 475 m/s) / (35.0 g + 4.4 kg) = 91.3 m/s

Therefore, the bag of flour is moving at 91.3 m/s when the bullet exits.

Read more about mass here:

https://brainly.com/question/1838164

#SPJ11

Earth is the only planet with a daily rotation. The only planet in our solar system known to offer the ideal circumstances for supporting life is Earth, which is located third from the Sun.

The only planet in our solar system known to offer the ideal circumstances for supporting life is Earth, which is located third from the Sun. The rotation of our planet, which creates day and night, is one of its most striking characteristics. Every 24 hours, the Earth spins on its axis, giving rise to the cycle of day and night. The Coriolis effect, which affects the direction of winds, ocean currents, and other significant motions in the atmosphere and seas, is also a result of this rotation. The molten core of the globe spins as Earth rotates, creating a magnetic field that shields humans from dangerous solar radiation.

Learn more about planet here:

https://brainly.com/question/26756957

#SPJ4

A species-specific, genetically programmed pattern of behavior is known as an instinct. It includes activities like migration, hunting, and grooming and is essential for an animal's survival; it is not learned but inherited.

A species-specific reaction pattern that is intrinsic and genetically encoded is known as an instinct. It is an activity or habit that is present from birth or hatching and is not learned but rather inherited. An animal's ability to reproduce and survive depends on these instincts. Depending on the species, instincts may involve activities including migration, nest-building, hunting, and grooming. Animals may compete for resources and adapt to their environments thanks to these behaviors, which are frequently complicated and quite particular. Natural selection is assumed to have led to the evolution of instincts, with creatures with advantageous instincts having a higher chance of surviving and passing on their genes to subsequent generations.

learn more about genetically programmed here:

https://brainly.com/question/15048208

#SPJ4

In addition to hundreds of smaller objects they have been discovering in the Kuiper Belt recently, astronomers were surprised to find dwarf planet Eris.

The first object that was bigger than Pluto was Eris. The initial estimate of Eris' size was 1,240 miles (2,000 kilometers) in diameter. It was later discovered to be a bit smaller, with a diameter of 1,163 miles (1,864 kilometers). Its moon, Dysnomia, was also discovered.Eris' orbit is far more eccentric than Pluto's, ranging from 38 to 97 astronomical units (AU) from the Sun.

Eris takes 557 Earth years to orbit the Sun. Despite the fact that Pluto's path also varies in shape, it is always closer to the Sun than Eris. Pluto and Eris were both discovered in the early 21st century, in 1930 and 2005, respectively. Because it was the largest known body in the Kuiper Belt, Pluto was formerly classified as the Solar System's ninth planet. Following the discovery of Eris and other trans-Neptunian objects, Pluto was reclassified as a dwarf planet.

Learn more about kuiper belt at:

https://brainly.com/question/25583240

#SPJ11

Heat transfer that occurs through liquids and gases is called Convection.

Heat transfer is the exchange of thermal energy between physical systems. It occurs when there is a temperature difference between two objects or regions of space, causing heat to flow from the hotter system to the cooler one. There are three modes of heat transfer: conduction, convection, and radiation.

Conduction is the transfer of heat through a material by direct contact. In this mode, heat flows from a region of higher temperature to a region of lower temperature. Convection is the transfer of heat through a fluid (liquid or gas) by the movement of the fluid itself. This mode of heat transfer occurs through convection currents, where hot fluids rise and cooler fluids sink.

To learn more about Heat transfer visit here:

brainly.com/question/13433948

#SPJ4

The ratio of the low temperature to high temperature of the Carnot engine is 2.38.

The efficiency of the Carnot engine can be defined as the ratio of network done per cycle by the engine to the heat energy absorbed by the engine per cycle by the working substance from the source.

Efficiency = 1 - (Tlow/Thigh)


Heat absorbed by engine = 480J

Heat expelled by engine = 320J

Efficiency of the engine = 56% of efficiency of Carnot engine

The ratio of low temperature to high temperature in the Carnot engine.

Let's assume the efficiency of the Carnot engine is 'ηc' = 1 - T₂/T₁

Where, T₂ = Low temperature and T₁ = High temperature

To calculate the efficiency of the engine given, η = (Q1 - Q2)/Q1

η = (480 - 320)/480

η = 160/480

η = 1/3

η = 33.33%

Now, η = 56% × ηc

0.56ηc = 1/3ηc = (1/3)/0.56 = 0.58

As we already know, ηc = 1 - T₂/T₁

T₂/T₁ = 1 - ηc

T₂/T₁ = 1 - 0.58

T₂/T₁ = 0.42

T₁/T₂ = 1/0.42

T₁/T₂ = 2.38

Therefore, the ratio of low temperature to high temperature in the given Carnot engine with an efficiency of 56% will be about 2.38.

Learn more about Carnot engine here:

https://brainly.com/question/14680478

#SPJ11

The magnitude of the magnetic field within the coaxial cable between the wire and the shell; that is, in the region r is 0. This can be calculated through Ampere's law.

The magnitude of the magnetic field between the wire and the shell (i.e. in the region r) can be calculated using Ampere's Law. This states that the integral of the magnetic field around any closed path is equal to the magnitude of the current passing through that path. Since the current I is flowing in the +x direction through the wire, and in the -x direction around the conducting shell, the total current passing through any path (r) in the radial direction will be 0.

Outside the coaxial cable (i.e. in the region r>R), the magnitude of the magnetic field can be calculated through Ampere's Law. Since the current I is flowing in the +x direction through the wire, and in the -x direction around the conducting shell, the total current passing through any path (r>R) in the radial direction will be I. Hence, the magnitude of the magnetic field in the region r>R is (μ/2π) × I/R, where μ is the permeability of free space.

Learn more about Ampere's law here:

https://brainly.com/question/29831953
#SPJ11

Focusing a camera changes the distance between the lens and the film. And the eye focus by changing the distance between the lens and the retina is true as, the eye does focus by changing the distance between the lens and the retina.

When we focus on an object, the curvature of the lens in our eye changes. This causes the light rays from the object to converge and focus on the retina, located at the back of the eye.

In order to focus on objects at different distances, our eye's lens must adjust its shape by changing its curvature, which changes the distance between the lens and the retina. This process is called accommodation.

The process of focusing the eye is similar to the process of focusing a camera. In a camera, changing the distance between the lens and the film allows for the object to be in focus. Similarly, in the eye, changing the distance between the lens and the retina allows for objects to be in focus.

Therefore, the eye focuses by changing the distance between the lens and the retina.

Read more about the retina:

https://brainly.com/question/28098895

#SPJ11

The Periodic Table of Elements served as the inspiration for this scavenger hunt. The exercise consists of two sets of questions, each of which has 28 questions that must be answered using the Periodic Table.

Students are tasked with identifying elements in the first set of questions using information from their attributes, such as the element's position on the periodic table, atomic mass, or quantity of electrons, protons, or neutrons. The objectives of the questions are to familiarise students with the properties of various elements and the structure of the Periodic Table. The second series of questions is comparable to the first, but more difficult because it asks students to identify components using less obvious cues, like their chemical symbol or a chemical formula. In order to succeed in their future studies of chemistry and other related sciences, students will benefit from being more familiar with the structure of the periodic table and the characteristics of various elements.

learn more about Periodic Table here:

https://brainly.com/question/11155928

#SPJ4

Answer: Lets say he is traveling that speed per 5 second.

Average Speed= Total Velocity/Time

(10+20)/5

30/5

6

Explanation:

Each tic mark indicates a time period of 9 seconds if the scale on the horizontal axis has a division of 9 seconds. As a result, the third tic point on the horizontal axis would denote the following period of time:

3 x 9 s = 27 s

Hence, 27 seconds are indicated by the third tic point on the horizontal axis.

It is true! The third tic point would represent three times nine seconds, or 27 seconds, as each tic mark on the horizontal axis denotes a time interval of nine seconds.Each tic mark indicates a time period of 9 seconds if the scale on the horizontal axis has a division of 9 seconds. As a result, the third tic point on the horizontal axis would denote the following period of time:Hence, 27 seconds are indicated by the third tic point on the horizontal axis.

learn more about horizontal axis here:

https://brainly.com/question/29774083

#SPJ4

Running on a treadmill is slightly easier than running outside because there is no drag force to work against. Suppose a 60 kg runner completes a 5.0 km race in 22 minutes. The drag force on the runner during the race is 13.4 N.

Running on a treadmill is slightly easier than running outside because there is no drag force to work against. Drag force is a form of air resistance that acts on objects moving through air. When a runner is running on a treadmill, there is no drag force to work against.

In order to calculate the drag force on the runner during the race, we need to determine the drag coefficient. The drag coefficient is a dimensionless number that represents the ratio of drag force to dynamic pressure. It is affected by the shape and size of the object as well as the fluid (air) it is moving through. Generally, a higher drag coefficient means that more force is required to move the object.

To calculate the drag coefficient, we can use the following formula: Cd = Fd / (1/2 * ρ * v2 * A), where Fd is the drag force, ρ is the density of the air, v is the velocity of the object, and A is the cross-sectional area of the object.

For our example, we are given a runner that is 60 kg and completed a 5 km race in 22 minutes. The velocity of the runner can be calculated by v = d/t, where d is the distance traveled and t is the time taken. This gives us a velocity of 8.3 m/s. The density of the air is given to be 1.2 kg/m3 and the cross-sectional area is 0.72 m2.

Plugging these values into the formula gives us a drag coefficient of 0.385. This means that for every 1 unit of dynamic pressure, the drag force is 0.385. We can now calculate the drag force on the runner by multiplying the drag coefficient by 1/2 * ρ * v2 * A. In this case, the drag force is 13.4 N.

In conclusion, the drag force on the runner during the race is 13.4 N. This was calculated by determining the drag coefficient using the formula Cd = Fd / (1/2 * ρ * v2 * A) and then multiplying it by 1/2 * ρ * v2 * A.

For more such questions on Drag force.

https://brainly.com/question/12774964#

#SPJ11

We cannot determine the value of interference with the given information.

The interference can be determined using the following formula:

interference = (observed double crossover rate - expected double crossover rate) ÷ (1 - expected double crossover rate).

The expected double crossover rate can be calculated using the formula:

expected double crossover rate = (distance AB × distance BC) ÷ total distance (AB + BC + AC).

Given:

Distance between A and B is 10mu;

Distance between B and C is 15mu;

Observed double crossover rate is 0.25%.

Therefore,

Distance AB = 10mu;

Distance BC = 15mu;

Total distance = AB + BC + AC

Expected double crossover rate = (10 × 15) ÷ (10 + 15 + AC)

expected double crossover rate = 150 ÷ (AC + 25)

The observed double crossover rate is 0.25%.

Therefore, the observed double crossover rate = 0.25% = 0.0025.

Interference = (observed double crossover rate - expected double crossover rate) ÷ (1 - expected double crossover rate)=

[0.0025 - (150 / (AC + 25))] ÷ [1 - (150 / (AC + 25))]

what is the interference if: distance between a and b is 10mu distance between b and c is 15mu observed double crossover rate is: 0.25%

To learn more about interference:https://brainly.com/question/16098226

#SPJ11

(a)  the work done by the force is -7 N.m

(b) the speed of the particle at r is 3.52 m/s

(c) Since the given force is not a conservative force, we cannot calculate the change in the potential energy of the system.

Work done by this force:

The work done by a force is calculated using the formula W = F.d, Where W is the work done, F is the force, and d is the displacement of the particle.Here, F = (3 i + 5 j) N, and d = r - 0 = ( i - 2 j) m - 0 i.e., d = (1 i - 2 j) m So,

W = F.d= (3 i + 5 j) N. (1 i - 2 j) m= 3 N.m - 10 N.m= -7 N.m

Therefore, the work done by the force is -7 N.m.

Speed of the particle at r:

Initial speed of the particle is given as 4 m/s. We need to calculate the final speed of the particle when it is at r. We can calculate the final speed using the work-energy principle which states that the work done by a force is equal to the change in kinetic energy of the particle.i.e., W = ΔKE. Total work done by the force is -7 N.m. Initial KE of the particle is 1/2 × 3.97 kg × (4 m/s)2 = 31.76 J.

Substituting the values in the above equation, we get

-7 = ΔKE - 31.76ΔKE = 24.76 J

Final KE of the particle is ΔKE = 1/2 × 3.97 kg × v2... (1)

Substituting the value of ΔKE in equation (1), we get

24.76 = 1/2 × 3.97 kg × v2v2 = 12.426 m2/s2v = 3.52 m/s

Therefore, the speed of the particle at r is 3.52 m/s.

Change in the potential energy of the system:

Potential energy of a system is defined as the work done by conservative forces to bring the particle from infinity to that position. Since the given force is not a conservative force, we cannot calculate the change in the potential energy of the system.

Learn more about potential energy, Speed and force at: https://brainly.com/question/24284560

#SPJ11

When the person jumps off the platform, traveling a horizontal distance of 1.00 m while falling a vertical distance of 0.500 m to the ground, the final speed of the platform is: 0.602 m/s

The momentum of the person right before he jumps off is given by [tex]P = m*v = 75 kg * 0 m/s = 0 Ns.[/tex]

After he jumps off, the momentum of the platform-person system must remain the same: P = m*v. So, the final velocity of the platform after the person jumps off is given by v = P/m.

Now, we just need to calculate the new momentum of the system after the person jumps off. For that, we can use the conservation of energy, which states that the total energy in a closed system remains constant:

Potential energy before = Potential energy after + Kinetic energy after mgh

[tex]= (1/2)mv^2 + (1/2)Mv^2[/tex]

where m is the mass of the person (75.0 kg), M is the mass of the platform (155 kg), h is the height (0.500 m), and v is the velocity of the platform after the person jumps off.

Solving this equation for v, we get:

[tex]v = sqrt(2gh/(m+M))[/tex]

[tex]v = sqrt(2*9.81*0.500/(75.0+155)) = 0.602 m/s[/tex]

Therefore, the final speed of the platform is 0.602 m/s.

To know more about speed refer here:

https://brainly.com/question/28224010#

#SPJ11

Answer:

[tex]\boxed{5427N}[/tex]

Explanation:

We use the well-known equation:

[tex]F=m\cdot a[/tex]

where:

so, we can rewrite the equation like this:

[tex]F= (810kg)(6.7m/s^2)\\F=5427N[/tex]

So, taking into account the statement as seen in the image, your answer must be correct.

[tex]\text{-B$\mathfrak{randon}$VN}[/tex]