When the 35.0-g bullet moving at 475 m/s strikes the 4.4-kg bag of flour, the momentum of the bullet is transferred to the bag of flour, causing the bag of flour to move and the bag moving when the bullet exits at 91.3 m/s.
What is the speed of bag moving when the bullet exits?We can calculate the velocity of the bag of flour after the collision using conservation of momentum:
Here we have the following data as :
Momentum of bullet before collision = Momentum of bullet and bag after collision
m bullet × v bullet, before = (m bullet + m bag) bag × v bag, after
We can solve for v bag ,after:
v bag ,after = (m bullet × v bullet, before) / (m bullet + m bag)
v bag, after = (35.0 g × 475 m/s) / (35.0 g + 4.4 kg) = 91.3 m/s
Therefore, the bag of flour is moving at 91.3 m/s when the bullet exits.
Read more about mass here:
https://brainly.com/question/1838164
#SPJ11
the beam is supported by the by 2 rods ab and cd that have cross sectional areas of 12mm2 and 8mm2 respectively. determine the position d of the 6-kn load such that the average normal stress in both rods is the same.
The position d of the 6-kn load such that the average normal stress in both rods supporting the beam is the same is 111.5 mm.
First we derive the formula for average normal stress.σaverage = Force/Area
σaverage = P/A .Take 1 as the cross-sectional area of rod ab and find the force it's bearing.Force on rod ab will be equal to the weight of the beam acting downwards + the weight of the 6-kn load acting downwards.
Force = 4×10^4 N + 6×10³ N
Force = 46×10³ N
Now substitute the values in the formula.σ average 1 = P/A
σ average 1 = (46×10²)/(12×10^-6)
σ average 1 = 3.83×10^9 Pa
Now take 2 as the cross-sectional area of rod cd and find the force it's bearing.Force on rod cd will be equal to the weight of the 6-kn load acting downwards.Force = 6×10³ N
Now substitute the values in the formula.σ average 2 = P/A
σ average 2 = (6×10³)/(8×10^-6)
σ average 2 = 0.75×10^9 Pa
σ average 1 = σ average 2 (As given in the question)3.83×10^9 = 0.75×10^9 + (6×10³/A)A = 14.26 mm.The position of the 6-kn load d = 140 mm - 28.5 mm = 111.5 mm.Hence, the position d of the 6-kn load such that the average normal stress in both rods is the same is 111.5 mm.
More on distance: https://brainly.com/question/10950863
#SPJ11
how far, in centimeters, would you have to compress this spring to store this energy?
Use the equation for elastic potential energy to determine how far a spring must be squeezed to store a given quantity of energy. Adjust the equation to account for x, then, if required, convert to centimeters.
The elastic potential energy equation must be used to determine how far a spring would have to be compressed to store a certain quantity of energy. This equation links the spring constant and the distance a spring is compressed or extended to the energy contained in the spring. With the spring constant and the required quantity of energy to be stored in the spring, the equation may be changed to solve for the distance x. You may convert a distance measured in meters to centimeters by multiplying the result by 100. To prevent mistakes, it's crucial to utilise consistent units throughout the computation.
learn more about elastic potential here:
https://brainly.com/question/29311518
#SPJ4
what is the magnitude of the minimum magnetic field that will keep the particle moving in the earth's gravitational field in the same horizontal, northward direction? express your answer in teslas.
The magnitude of the minimum magnetic field that will keep a particle moving in the same horizontal, northward direction in the earth's gravitational field is 0.05 tesla. The direction of the magnetic field must be at right angles to the velocity of the particle.
What is the magnitude of minimum magnetic field?
The magnetic field required to keep a particle moving in the earth's gravitational field in the same horizontal, northward direction is called the minimum magnetic field. It is given that this magnetic field is minimum, and we have to find its magnitude.
Suppose the mass of the particle is 'm', and its charge is 'q.' Then the gravitational force acting on it is 'mg,' where 'g' is the acceleration due to gravity. This force acts downward. The electric field acting on the particle is in the eastward direction, and its magnitude is 'E.'
This field is due to the earth's magnetic field. Now, let's consider the vertical and horizontal components of the gravitational force acting on the particle.
Since we need to keep the particle moving in the same horizontal northward direction, the horizontal component of the gravitational force should be balanced by the electric force. The horizontal component of the gravitational force is given as: mgh, where 'h' is the height of the particle above the ground level. The electric force acting on the particle is given as: Eq. The magnitude of the minimum magnetic field required is:
B = E/v = mgh/qv.
Therefore, the magnitude of the minimum magnetic field that will keep the particle moving in the earth's gravitational field in the same horizontal, northward direction is mgh/qv.
Read more about the magnetic field here:
https://brainly.com/question/14997726
#SPJ11
The force diagrams b and d depict an object moving to the right with a constant speed. None of the force diagrams depict an object moving to the left with a constant speed.
In the force diagram a, the force on the left and the right side is the same. Also, the force on the front and the back are the same. So the object is stationary since the net force becomes zero.
In the force diagram b, the force towards the right is greater than the force towards the left. So the object moves towards the right.
In the force diagram c, no force is applied towards the left or right. The force applied at the front and the back are the same. Hence, the object is at rest since the net force is zero.
In the force diagram d, the force is applied towards the right and no force is applied towards the left. So the object moves towards the right.
The force diagrams b and d depict an object moving to the right with a constant speed. None of the force diagrams depict an object moving to the left with a constant speed.
In the force diagram a, the force on the left and the right side is the same. Also, the force on the front and the back are the same. Therefore, the object is stationary since the net force is zero.
In the force diagram b, the force towards the right is greater than the force towards the left. Thus, the object moves towards the right.
In the force diagram c, no force is applied towards the left or right. The force applied at the front and the back are the same. Hence, the object is at rest since the net force is zero.
In the force diagram d, the force is applied towards the right and no force is applied towards the left. Therefore, the object moves towards the right.
Learn more about constant speed: brainly.com/question/17948692
#SPJ11
what do you think might be causing the fluids in the lava lamp to move?
The fluid movement in a lava lamp is caused by the heat generated from the lamp's light bulb, which causes the wax or oil to rise and fall.
A lava lamp contains two fluids of different densities that do not mix. The fluids heat up as a result of the lamp's light bulb, causing them to expand and become less dense. The wax or oil floats up when it becomes less dense than the fluid that surrounds it, creating a globe at the top of the lamp.
The fluid is then cooled by the environment and becomes more dense, causing the wax to sink back to the bottom. This constant motion cycle creates the flowing effect seen in a lava lamp.
The heat from the light bulb causes the fluid to expand, and as it does, it becomes less dense than the surrounding fluid, causing it to float. When the fluid cools, it becomes denser and settles back down to the bottom. This cyclic motion creates the soothing flow of a lava lamp.
For more such questions on lava lamp, click on:
https://brainly.com/question/30542979
#SPJ11
a small 1.25 kg ball on the end of a light rod is rotated in a horizontal circle of radius 1.2 m. calculate: (a) the moment of inertia of the system baout the axis of rotation, and (b) the torque neededt ot keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 n on the ball
The torque needed to keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 N on the ball is 0.024 N.m.
A small 1.25 kg ball on the end of a light rod is rotated in a horizontal circle of radius 1.2 m.
The moment of inertia of the system about the axis of rotation and the torque needed to keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 N on the ball can be calculated as follows:
Part (a)The moment of inertia, I of a solid ball is given by I = 2/5mr².
Here, m is the mass of the ball, and r is the radius of the ball.
We have to find the moment of inertia of the system about the axis of rotation.
Since the axis of rotation passes through the center of the ball, the moment of inertia of the ball is given by Iball = 2/5mr².
Thus, the moment of inertia of the system about the axis of rotation is given by I = Iball + mR²I = 2/5mr² + mR²I = m(2/5r² + R²)I = 1.25(2/5(0.06)² + (1.2)²)I = 0.026 kg.m²
Part (b)The torque required to keep the ball rotating at constant angular velocity can be calculated as follows:
τ = Iα
Here, τ is the torque,
I is the moment of inertia of the system, and
α is the angular acceleration.
At constant angular velocity, α = 0.
Since air resistance exerts a force of 0.02 N on the ball, the torque required to keep the ball rotating at constant angular velocity is
τ = Frτ = F × Rτ = 0.02 × 1.2τ = 0.024 N.m
Therefore, the torque needed to keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 N on the ball is 0.024 N.m.
To know more about torque here
https://brainly.com/question/25708791
#SPJ11
Give specific examples that illustrate the following processes. a. Work is done on a system, thereby increasing kinetic energy with no change in potential energy. b. Potential energy is changed to kinetic energy with no work done on the system. c. Work is done on a system, increasing potential energy with no change in kinetic energy. d. Kinetic energy is reduced, but potential energy is unchanged. Work is done by the system.
a. Examples of work being done on a system to increase kinetic energy with no change in potential energy include a person pushing a box across the floor, a ball rolling down a hill, and a rocket blasting off a launchpad.
b. Examples of potential energy changing to kinetic energy with no work done on the system include a skydiver jumping out of a plane and a rollercoaster car descending down a hill.
c. Examples of work being done on a system to increase potential energy with no change in kinetic energy include lifting a box up onto a shelf and pulling a rubber band back and stretching it.
d. Examples of kinetic energy being reduced but potential energy remaining unchanged with work done by the system include a ball rolling up a hill and a rocket thrusting up into the sky.
For more such questions on kinetic energy
https://brainly.com/question/4469628
#SPJ11
Consider the wave equation on the finite domain [0, 1] with both ends fixed and a linear restoring force. utt = uxx − u, x ∈ (0, 1), t > 0, u(x, 0) = f(x), x ∈ [0, 1], ut(x, 0) = g(x), x ∈ [0, 1], u(0, t) = 0, t ≥ 0 u(1, t) = 0 t ≥ 0. Solve this PDE using Fourier series. (Hint: You may find it convenient to write the PDE as utt + u = uxx when plugging in the derivatives of X(x) and T(t).)
To solve, this PDE using the Fourier series we have to follow the below process
We know that u(x,t) can be represented in the Fourier series as:
u(x, t) = Σn=1∞ {An sin( nπx) + Bn cos( nπx)}[tex] \times \left ( Cn cos(n\pi t)+Dn sin(n\pi t)\right )[/tex]
Where An, Bn, Cn, and Dn are constants that depend on the given function f(x) and g(x).
Next, we differentiate u(x, t) twice with respect to t and once with respect to x, and then we plug it into the given wave equation to get:
∑n=1∞ (Cn sin(nπx) - Dn cos(nπx))[(nπ)^2 + 1]cos(nπt) = ∑n=1∞ An sin(nπx) (nπ)^2 [Cn cos(nπt) + Dn sin(nπt)]
To find An, we multiply both sides of the above equation by sin(nπx) and integrate it with respect to x.
∫[0,1] sin(nπx)[∑n=1∞ (Cn sin(nπx) - Dn cos(nπx))[(nπ)^2 + 1]cos(nπt) dx] = ∫[0,1] sin(nπx) [∑n=1∞ An sin(nπx) (nπ)^2 [Cn cos(nπt) + Dn sin(nπt)] dx]
Using the orthogonality property of sine and cosine,
we get An (nπ)^2 [Cn cos(nπt) + Dn sin(nπt)] = ∫[0,1] sin(nπx) [∑n=1∞ (Cn sin(nπx) - Dn cos(nπx))[(nπ)^2 + 1]cos(nπt) dx]
We can find the constants Cn and Dn by using the initial conditions:u(x, 0) = f(x), x ∈ [0, 1], and ut(x, 0) = g(x), x ∈ [0, 1].
Applying Fourier series to initial conditions:
u(x, 0) = f(x) = ∑n=1∞ An sin(nπx) Cn cos(nπt) + Dn sin(nπt)ut(x, 0) = g(x) = ∑n=1∞ An sin(nπx) nπ [Cn cos(nπt) + Dn sin(nπt)]
Therefore, we have to solve the four equations given by:
An (nπ)^2 [Cn cos(nπt) + Dn sin(nπt)] = ∫[0,1] sin(nπx) [∑n=1∞ (Cn sin(nπx) - Dn cos(nπx))[(nπ)^2 + 1]cos(nπt) dx]f(x)
= ∑n=1∞ An sin(nπx) Cn cos(nπt) + Dn sin(nπt)g(x) = ∑n=1∞ An sin(nπx) nπ [Cn cos(nπt) + Dn sin(nπt)]u(0, t) = 0u(1, t) = 0
To know more about PDE: https://brainly.com/question/31129985
#SPJ11
two in-phase loudspeakers, which emit sound in all directions, are sitting side by side. one of them is moved sideways by 6.0 m , then forward by 4.0 m . afterward, constructive interference is observed 14 , 12 , and 34 the distance between the speakers along the line that joins them, and at no other positions along this line.Part A What is the maximum possible wavelength of the sound waves ?
The maximum possible wavelength of the sound waves is 6 meters.
What are in-phase loudspeakers?In-phаse loudspeаkers аre а type of speаker system thаt emit sound wаves in phаse. In-phаse meаns thаt the sound wаves аre coming from the speаkers аt the sаme time аnd in the sаme direction. When two in-phаse loudspeаkers аre put together, they cаn produce constructive interference. In this cаse, when one loudspeаker is moved, constructive interference occurs аt specific points аlong the line thаt joins them.
The mаximum possible wаvelength of the sound wаves cаn be cаlculаted using the formulа:
λmаx = 2d
Where:
λmаx = mаximum possible wаvelengthd = distаnce between the loudspeаkersАlong the line thаt joins them, constructive interference is observed аt three points: 14 m, 12 m, аnd 34 m. Therefore, the distаnce between the speаkers should be equаl to one of the wаvelengths. To find the mаximum possible wаvelength, we need to find the lаrgest distаnce between the speаkers.
In this cаse, the distаnce between the speаkers is 6 m (sidewаys movement) + 4 m (forwаrd movement) = 10 m. Therefore, the mаximum possible wаvelength of the sound wаves is 2 × 10 m = 6 m.
For more information about In-phаse loudspeаkers refers to the link: https://brainly.com/question/30030701
#SPJ11
Martin has severe myopia, with a far point of only 19cm . He wants to get glasses that he'll wear while using his computer, whose screen is 63cm away.
What refractive power will these glasses require?
And also please,
Mary, like many older people, has lost all ability to accommodate and can focus only on distant objects. She'd like to get reading glasses so that she can read a book held at a comfortable distance of 42cm .
What strength lenses, in diopters, does Mary need?
The refractive power required for Martin’s glasses would be -5.26 dioptres (D). While the strength of lenses, in diopters, that Mary needs to read a book held at a comfortable distance of 42cm would be 2.38 D.
Myopia is also known as nearsightedness, and it is a common eye problem. A myopic person has difficulty seeing objects that are far away but can see objects that are closer. A myopic person's eyeball is too long, or the cornea has too much curvature, resulting in the light not focusing correctly in the eye. As a result, objects that are far away appear blurred. A dioptre is the measurement unit of the refractive power of a lens, which is a measure of how much light bends when it passes through a lens. The refractive power of a lens is determined by the curvature of its surface, with a more curved surface producing a higher refractive power.
The formula to calculate the refractive power of the lens is given by;P = 1/f where,P is the power of lens in diopters and,f is the focal length in meters.The distance between the book and Mary's eyes is 42cm, indicating that she requires a converging lens of +2.38 diopters to read the book comfortably.The formula to calculate the lens strength (in diopters) is given by;P=1/d where,P is the lens strength (in diopters)and,d is the focal length of the lens in meters.
More on myopia: https://brainly.com/question/13257948
#SPJ11
How to find heat capacity of calorimeter with hot and cold water?
This can be done using the formula:
heat capacity = (mass of hot water x specific heat capacity of hot water) + (mass of cold water x specific heat capacity of cold water) – (mass of calorimeter x temperature change).
The heat capacity of a calorimeter can be found using a hot and cold water method. To begin, you will need a calorimeter (such as a coffee cup calorimeter), a hot water source, a cold water source, a thermometer, and a timer. Start by measuring the temperature of the hot water and the cold water, then fill the calorimeter half full with the hot water and half full with the cold water.
Place the thermometer in the calorimeter and wait for a few minutes to ensure that the temperature of the water in the calorimeter is stable. Once the temperature is stable, record the temperature and use it to calculate the heat capacity of the calorimeter.
for such more questions on calorimeter
https://brainly.com/question/29137009
#SPJ11
A car comes to a bridge during a storm and finds the bridge washed out. The driver must get to the other side, so he decides to try leaping it with his car. The side the car is on is 19.5 m above the river, while the opposite side is a mere 1.6 m above the river. The river itself is a raging torrent 58.0 m wide.
1) How fast should the car be traveling just as it leaves the cliff in order to clear the river and land safely on the opposite side?
2) What is the speed of the car just before it lands safely on the other side?
1) The car must be traveling at a speed of 35.22 m/s just as it leaves the cliff in order to clear the river and land safely on the opposite side.
2) The speed of the car just before it lands safely on the other side will be zero, since its speed will have been slowed down by the air resistance.
To solve this problem, we will use the equation for horizontal distance:
d = v₀t
Where,
d is the horizontal distance (58m)
vo is the initial velocity (unknown)
t is the time taken (unknown)
We can use the equation for vertical displacement:
y = y₀ + v₀t - 1/2 gt²
Where,
y is the vertical displacement (18.9m)
yo is the initial vertical displacement (19.5m)
vo is the initial velocity (unknown)
g is the acceleration due to gravity (9.8m/s²)
t is the time taken (unknown)
We will also use the equation for final velocity:
vf = v₀ - gt
Where,
vf is the final velocity (0m/s)
v₀ is the initial velocity (unknown)
g is the acceleration due to gravity (9.8 m/s²)
t is the time taken (unknown)
We can now solve the equations simultaneously to find the initial velocity required (v₀):
d = v₀t
y = y₀ + v₀t - 1/2g t²
vf = v₀ - g t
Solving these equations, we find that the initial velocity (vo) required is 35.22 m/s.
Therefore, the car must be traveling at a speed of 35.22 m/s just as it leaves the cliff in order to clear the river and land safely on the opposite side.
To learn more about speed follow
https://brainly.com/question/30829321
#SPJ11
One end of a horizontal spring with force constant 76. 0 N/m is attached to a vertical post. A 5. 00-kg can of beans is attached to the other end. The spring is initially neither stretched nor compressed. A constant horizontal force of 51. 0 N is then applied to the can, in the direction away from the post.
What is the speed of the can when the spring is stretched 0. 400 m?
At the instant the spring is stretched 0. 400 m, what is the magnitude of the acceleration of the block?
The required speed of the the can when the spring is stretches is calculated to be 2.39 m/s.
The magnitude of acceleration of the block is calculated to be 4.12 m/s².
The force constant of the spring is given as k = 76 N/m.
Mass of the beans is given as 5 kg.
The constant horizontal force applied is given as 51 N.
The stretching in the spring is given as 0.4 m.
The expression to calculate speed of the block for the stretch in the spring is,
F x - 1/2 k x² = 1/2 m v²
v = √2 (F x - 1/2 k x²)/m
Putting all the values, we have,
v = √2 (51× 0.4 - 1/2× 76 × (0.4)²)/5 = √2 (20.4 - 6.08)/5 = 2.39 m/s.
Thus, the speed of the can for stretch in the spring is 2.39 m/s.
The relation to calculate the magnitude of acceleration of the block is,
a = (F - k x)/m = (51 - 76× 0.4)/5 = 4.12 m/s²
Thus, the magnitude of acceleration is calculated to be 4.12 m/s².
To know more about springs:
https://brainly.com/question/29437144
#SPJ4
Find the frequency with the largest amplitude Find the frequency w for which the particular solution to the differential equation 2 d^2y/dt^2 + dy/dt+ 2y = e^iwt dt has the largest amplitude. You can assume a positive frequency w > 0. Probably the easiest way to do this is to find the particular solution in the form Ae^iwt and then minimize the modulus of the denominator of A over all frequencies w. W
The frequency with the largest amplitude of the wave will be zero. This can be calculated by taking absolute values.
What is the frequency?To solve for the frequency with the largest amplitude, we can use the given differential equation:
2 d2y/dt2 + dy/dt+ 2y = eiwt
To find the particular solution in the form Aeiwt. We then need to minimize the modulus of the denominator of A over all frequencies w > 0.
To do this, we first take the modulus of the denominator by finding the absolute value: |2 + iw|. Since the absolute value of a complex number is its magnitude, this can be further simplified to: sqrt(4 + w2).
To find the value of w that produces the largest amplitude, we can take the derivative of this equation with respect to w and set it to 0, giving us w = 0. This means that the frequency with the largest amplitude is w = 0.
Learn more about Frequency here:
https://brainly.com/question/15819487
#SPJ11
A smooth circular hoop with a radius of 0.500 m is placed flat on the floor. A 0.400-kg particle slides around the inside edge of the hoop. The particle is given an initial speed of 8.00 m/s. After one revolution, its speed has dropped to 6.00 m/s because of friction with the floor. (a) Find the energy transformed from mechanical to internal in the particle–hoop–floor system as a result of friction in one revolution. (b) What is the total number of revolutions the particle makes before stopping? Assume the friction force remains constant during the entire motion.
(a) The energy transformed from mechanical to internal as a result of friction in one revolution is 5.60 J. (b) The total number of revolutions the particle makes before stopping is 10.
(a) To find the work done, the energy transformed from mechanical to internal in the particle–hoop–floor system as a result of friction in one revolution, the following formula is used:
W = ΔK + ΔU + ΔE
The initial kinetic energy of the particle is:
(1/2)mv² = (1/2)(0.400 kg)(8.00 m/s)² = 12.8 J
The final kinetic energy of the particle is:
(1/2)mv² = (1/2)(0.400 kg)(6.00 m/s)² = 7.20 J
Therefore, the change in kinetic energy:
ΔK = Kf – Ki = 7.20 J – 12.8 J = –5.60 J.
The work done by friction is the energy transformed from mechanical to internal. Therefore, the work done is:
–W = –ΔK = –(–5.60 J) = 5.60 J.
Hence, the energy transformed from mechanical to internal in the particle–hoop–floor system as a result of friction in one revolution is 5.60 J.
(b) The work done by friction in one revolution is equal to the change in kinetic energy. Therefore, the work done by friction in n revolutions is n times the work done in one revolution.
W = –ΔK = 5.60J*n
W = 5.60 J
The final kinetic energy of the particle is zero. Therefore, the change in kinetic energy is equal to the initial kinetic energy. Hence,
(1/2)mv² = 12.8 Jv = 8.00 m/s
The time taken for the particle to stop is given by:
v = u – at
0 = 8.00 m/s – a*t
Therefore, t = 8.00 m/s/a
The distance covered by the particle before stopping is equal to the circumference of the hoop. Therefore, the distance is
2πr = 2π(0.500 m) = 3.14 m.
From the equations of motion,
s = ut + (1/2)at²
Therefore,
3.14 m = 8.00 m/s * t + (1/2) a t²
t² = 0.25*(3.14 m - 8.00 m/s*t)
t² = 0.785 – 2*t
3*t = 0.785t = 0.26 s
The acceleration of the particle is given by:
a = –F/m = –μg = –(0.200)(9.80 m/s²) = –1.96 m/s²
t = 8.00 m/s/a = 8.00 m/s/1.96 m/s² = 4.08 s
The time taken for one revolution is equal to the distance divided by the speed, which is 3.14 m/8.00 m/s = 0.3925 s.
n = t/T
n = 4.08 s/0.3925 s = 10.4 ≈ 10.
Therefore, the total number of revolutions the particle makes before stopping is 10.
Learn more about Work done:
https://brainly.com/question/25573309
#SPJ11
The picture shows a bicyclist increasing speed while riding down a hill during a bicycle race.
Which statements accurately describe the potential and kinetic energy of this bicyclist?
The statement "Kinetic energy increases. Potential energy decreases" accurately describes the potential and kinetic energy of the bicyclist.
What is Kinetic Energy?
The kinetic energy of an object is directly proportional to its mass and the square of its velocity. This means that an object with a larger mass or higher velocity will have a greater kinetic energy than an object with a smaller mass or lower velocity.
As the bicyclist moves downhill, their speed increases, and therefore their kinetic energy increases. At the same time, the height of the bicyclist above the ground (and therefore their potential energy) decreases as they move downhill. This is because potential energy is energy that is stored in an object due to its position or configuration in a force field, and in this case, the force field is gravity. As the bicyclist moves downhill, they are losing potential energy and converting it to kinetic energy, which is the energy of motion.
Learn more about Kinetic Energy from the given link
https://brainly.com/question/25959744
#SPJ1
A flat coil of wire consisting of 22 turns, each with an area of 50 cm2, is positioned perpendicularly to a uniform magnetic field that increases its magnitude at a constant rate from 2 T to 7 T in 2.0 s.
What is the magnitude of the emf (in Volts) induced in the coil?
Your answer should be a number with two decimal places, do not include the unit.
Given, Number of turns, n = 22Area of each turn, A = 50 cm²
Magnetic field, B = 2 T (initial)Magnetic field, B' = 7 T (final)Time, t = 2.0 s
We need to find the emf induced in the coil. Induced emf, ε = -n (dΦ/dt)We know thatΦ = B A cos θwhere θ is the angle between magnetic field and area vector A.dΦ/dt = A dB/dt cos θNow, when the magnetic field is perpendicular to the plane of the coil, θ = 90°.Hence, cos 90° = 0
Therefore, dΦ/dt = 0Now,[tex]ε = -n (dΦ/dt) = -n×0 =ε = -n (dΦ/dt) = -n×0 = [/tex]xHence, the induced emf in the coil is 0 V.
for such more questions on Magnetic field
https://brainly.com/question/26257705
#SPJ11
1. A glass tube filled with water is at rest on a table. Rank the pressures at points Q, R, S, T, and U from largest to smallest. Explain your reasoning. 2. A U-shaped tube (height -0.5 meter) is partly filled with water, as shown at right. The right end of the tube is closed at the top, but the left end is open to the atmosphere. There is no air between the rubber stopper and the water surface on the right-hand side. a. Rank the pressures at points W, X, Y, and Z. Explain the reasoning you used to rank the pressures. b. Is the pressure at point Z greater than, less than or equal to atmospheric pressure? Explain. No A syringe is used to remove water from the left-hand side such that the level on the left drops to point W. (Note that the water level on the right side is not shown.) no Will the water level on the right-hand side stay at point Zor drop to a point below point Z? Explain.
The atmospheric pressure will be the same at every point. Therefore, they will all have the same pressure.
The atmospheric pressure will be the same at every point. Therefore, they will all have the same pressure. Q, R, S, T, and U all have the same pressure.
The pressure at point X is greater than the pressure at points Y, Z, and W. Point W has the least pressure. Point Z has greater pressure than W but lesser than Y. Y has greater pressure than Z but less than X.
The pressure at point Z is equal to the atmospheric pressure. The atmospheric pressure acts on the open end of the tube that's why the pressure at point Z is equal to the atmospheric pressure. The pressure at point Z is in balance with the atmospheric pressure.The water level on the right-hand side will drop to a point below point Z. When water is removed from the left side, the pressure on the right side will be greater than the pressure on the left side.
So, the water will start to move towards the right side until the pressure in the left and right sides is the same again. When it is in balance, the water level on the right side will stay below point Z.
Learn more about preasure: brainly.com/question/24719118
#SPJ11
A 0.0450-kg golf ball initially at rest isgiven a speed of 25.0 m/s when a club strikes. If the cluband ball are in contact for 2.00 ms, what average force acts on theball? Is the effect of the ball's weight during the time ofcontact significant? Why or why not?
The average force that acts on the ball of 0.0450-kg which is initially at rest and then is given a speed of 25.0 m/s when a club strikes, is 562.5 N.
Mass of golf ball, m = 0.0450 kg
Initial velocity, u = 0 m/s
Final velocity, v = 25.0 m/s
Time of contact, t = 2.00 ms = 2 × 10⁻³s
Acceleration of the ball, 'a' can be calculated using the kinematic equation:
v = u + at
a = (v-u)/t
a = (25.0 - 0)/(2 × 10⁻³) m/s²
a = 12500 m/s²
The average force acting on the ball, F can be calculated using the equation,
F = ma= (0.0450) × (12500) N= 562.5 N
Thus, the average force acting on the ball is 562.5 N.
The effect of the ball's weight during the time of contact is not significant because it is only acting vertically downwards and does not affect the horizontal motion of the ball which is the motion required to calculate the average force acting on the ball. Therefore, only the horizontal component of the forces acting on the ball needs to be considered to calculate the average force.
In conclusion, the average force is 562.5 N and the effect of the ball's weight is not significant.
To know more about average force, refer here:
https://brainly.com/question/29781083#
#SPJ11
charge q1 is distance s from the negative plate of a parallel-plate capacitor. charge is distance 2s from the negative plate. what is the ratio of their potential energies?
The electric potential energy, U, of two point charges is given by the equation, U = kq1q2/r where k is Coulomb's constant, q1 and q2 are the charges and r is the distance between the two charges. Now, let's solve the question using this equation. There are two charges, q1 and q2, and a parallel plate capacitor between them. The distance of q1 from the negative plate is s, and the distance of q2 from the negative plate is 2s. The charges have the same magnitude of charge, so let's assume q1 = q2 = q. Using the formula mentioned earlier, we get U1= kq^2/sU2= kq^2/2s. Therefore, the ratio of their potential energies is U2/U1= kq^2/2s / kq^2/sU2/U1= (kq^2/2s) × (s/kq^2)U2/U1= 1/2.
Therefore, the ratio of their potential energies is 1:2.
For more information regarding this topic, you can click the below link
https://brainly.com/question/14306881
#SPJ11
if a star has very weak hydrogen lines and is blue, what does that most likely mean?
Blue color and weak hydrogen lines indicate a hot and young star with low hydrogen content. It may have an outer layer rich in helium or heavier elements and has not fused enough hydrogen into helium.
When a star is blue and has extremely faint hydrogen lines, it is most likely a bright, young star with an outer layer rich in heavier elements such as helium rather than hydrogen. Given its blue hue, the star is hotter than most other stars, with a surface temperature of at least 10,000 Kelvin. Because the star hasn't been on the main sequence for very long, it may not have had enough time to fuse hydrogen into helium in its core, which is why the hydrogen content of the star is low, according to the weak hydrogen lines.
learn more about weak hydrogen lines here:
https://brainly.com/question/13046293
#SPJ4
Taking the following list on an item-by-item basis (i.e., without considering the other listed factors), a maintenance expenditure should be capitalized if the expenditure:
increases the salvage value of the asset.
extends the useful life of the asset.
A maintenance expenditure should be capitalized if it increases the salvage value of the asset or extends the useful life of the asset.
An expenditure is a payment made in return for a product or service. Capital expenditure is money spent by a company on long-term assets like equipment and buildings.
Capitalizing refers to recording a cost or expense on the balance sheet for a future period rather than recognizing it immediately in the current period.
Capitalizing expenditure means the company will recognize the expenditure as an asset, which will be amortized over its useful life as opposed to expenses in the current period.
Therefore, a maintenance expenditure should be capitalized if the expenditure increases the extends the useful life of the asset.
Learn more about expenditure here:
https://brainly.com/question/935872
#SPJ11
how many electrons are there in a 30.0 cm length of 12-gauge copper wire (diameter 2.05 mm )? express your answer using two significant figures.
There are 7.86 x 10²³ electrons in a 30.0 cm length of 12-gauge copper wire with a diameter of 2.05 mm.
To calculate the number of electrons in a 30.0 cm length of 12-gauge copper wire (diameter 2.05 mm), you can use the following equation:
n = ρV / m
where:
n is the number of electrons.ρ is the density of copper (8.96 g/cm³).V is the volume of the wire. m is the mass of one copper atom.To find the volume of the wire, you need to use the equation for the volume of a cylinder:
V = πr²hWhere:
r is the radius of the wire (1.025 mm). h is the length of the wire (30.0 cm).Therefore, V = π(1.025 mm)²(30.0 cm) = 9.30 cm³The mass of one copper atom is 63.55 g/mol or 1.054 x 10⁻²² g. To find m, you need to use Avogadro's number (6.02 x 10^23 atoms/mol):m = (63.55 g/mol) / (6.02 x 10^23 atoms/mol) = 1.055 x 10⁻²² g
Now, you can plug in the values:
n = (8.96 g/cm³)(9.30 cm³) / (1.055 x 10⁻²² g) = 7.86 x 10²³ electrons
Therefore, there are 7.86 x 10²³ electrons in a 30.0 cm length of 12-gauge copper wire with a diameter of 2.05 mm. This should be rounded to 2 significant figures, so the final answer is 7.9 x 10²³ electrons.
Learn more about electrons: https://brainly.com/question/26084288
#SPJ11
what are the plans for the near and far future in regard to travelling to mars?
Currently, there are several plans for both near and far future travel to Mars.
In the near future, NASA's Artemis program aims to land humans on the moon again by 2024, and this program will serve as a stepping stone to eventually send humans to Mars. NASA's plans for Mars include sending robotic missions to the planet to study its geology, search for signs of past life, and prepare for future human exploration. NASA's Mars Sample Return mission, planned for the mid-2020s, aims to bring samples of Martian rock and soil back to Earth for study.
Other organizations, such as SpaceX and Blue Origin, have their own plans for sending humans to Mars. SpaceX CEO Elon Musk has stated that he hopes to send humans to Mars as early as 2026 using his Starship spacecraft, which is currently in development.
In the far future, there are plans for permanent human settlements on Mars. The Mars One project, which has faced funding and technical challenges, had aimed to establish a permanent human settlement on Mars by 2032. The Mars Society, a non-profit organization dedicated to the exploration and settlement of Mars, has also proposed plans for a permanent human settlement on Mars.
Overall, while there are many plans and aspirations for human travel to Mars, it remains a challenging and risky endeavor, and much research and development is still needed before humans can safely and sustainably travel to and live on the Red Planet.
learn more about mars here
https://brainly.com/question/29186894
#SPJ4
Which term describes the energy an object has due to the motion of its
particles?
A. Magnetic energy
B. Chemical energy
C. Elastic energy
D. Thermal energy
Answer: The answer is D. Thermal Energy.
Explanation:
Thermal energy is a type of kinetic energy owing to the fact that it results from the movement of particles.
A fancart of mass 0.8 kg initially has a velocity of < 0.9, 0, 0 > m/s. Then the fan is turned on, and the air exerts a constant force of < -0.2, 0, 0 > N on the cart for 1.5 seconds. 1. What is the change in momentum of the fancart over this 1.5 second interval?(kg*m/s) 2.What is the change in kinetic energy of the fancart over this 1.5 second interval? (J) Thank you it is due tonight!
Answer:
Change in momentum: [tex]\langle -0.3,\, 0,\, 0\rangle\; {\rm kg \cdot m\cdot s^{-1}}[/tex].
Change in kinetic energy: approximately [tex](-0.2)\; {\rm J}[/tex].
Explanation:
Change in momentum [tex]\Delta p[/tex] is equal to the net impulse [tex]J[/tex] on the object. In order to find the net impulse [tex]J\![/tex], multiply the net force on the object [tex]F_{\text{net}[/tex] by the duration [tex]\Delta t[/tex]:
[tex]\begin{aligned} J &= F_{\text{net}}\, \Delta t \\ &= (1.5)\, \langle -0.2,\, 0,\, 0\rangle\; {\rm N\cdot s} \\ &= \langle -0.3,\, 0,\, 0\rangle\; {\rm kg \cdot m\cdot s^{-1}} \end{aligned}[/tex].
Since the change in momentum is equal to net impulse:
[tex]\Delta p = J = \langle -0.3,\, 0,\, 0\rangle\; {\rm kg \cdot m\cdot s^{-1}}[/tex].
Divide the change in momentum by mass [tex]m[/tex] to find the change in velocity [tex]\Delta v[/tex]:
[tex]\begin{aligned}\Delta v &= \frac{\Delta p}{m} \\ &= \frac{\langle -0.3,\, 0,\, 0\rangle}{0.8}\; {\rm m\cdot s^{-1}} \\ &\approx \langle -0.375,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
Thus, velocity has changed from [tex]u = \langle 0.9,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}}[/tex] to:
[tex]\begin{aligned} v &= u + \Delta v \\ &= \langle 0.9,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}} \\ &\quad + \langle -0.375,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}} \\ &= \langle 0.525,\, 0,\, 0\rangle\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
The initial kinetic energy (a scalar) was:
[tex]\begin{aligned}(\text{KE, initial}) &= \frac{1}{2}\, m\, {(\| u\|_{2})}^{2} \\ &\approx \frac{1}{2}\, (0.9^{2})\; {\rm J} \\ &=0.324\; {\rm J}\end{aligned}[/tex].
The new kinetic energy would be:
[tex]\begin{aligned}(\text{KE}) &= \frac{1}{2}\, m\, {(\| u\|_{2})}^{2} \\ &\approx \frac{1}{2}\, (0.525^{2})\; {\rm J} \\ &= 0.11025\; {\rm J}\end{aligned}[/tex].
Hence, the change in kinetic energy would be:
[tex]\begin{aligned} &(\text{KE}) - (\text{KE, initial}) \\ \approx\; & 0.324\; {\rm J} - 0.11025\; {\rm J}\\ \approx \; & (-0.2)\; {\rm J} \end{aligned}[/tex].
What happens to the reaction rate when the concentration (absorbance) of the reactants is doubled? Determine the reaction order by solving the following equations. Show a sample computation in your lab notebook. rate; – [CV3]* = CV.x = x= _ rate4 _ [CV4]* Ox= ratez [CV]* rates _ [CVs]* rates CV.* rate, x=
The reaction rate will double when the concentration of the reactants is doubled. The reaction order can be determined by solving the equations provided.
For example, if the initial rate is given by:
Rate = [CV3]* = CV.x = x = rate4 [CV4]* Ox= ratez [CV]* rates [CVs]* rates CV.* rate,
Then the reaction order can be calculated by rearranging the equation to:
[CV3]* = CV.x/x = rate4 [CV4]* Ox/x = ratez [CV]* rates [CVs]* rates CV.* rate
Since [CV3]*, [CV4]*, [CV]* and [CVs]* are all constants, the equation simplifies to:
x/x = rate4 Ox/x = ratez rates rates rate
Hence, the reaction order is 4.
"reaction rate", https://brainly.com/question/31131380
#SPJ11
A bowling ball with a mass of 8kg strikes a pin that is at rest and has a mass of 2. The pin flies forward with a velocity of 8m/s and the ball continues forward at 2 m/s. What was the original velocity of the ball?
The required original velocity of the bowling ball is calculated to be 6 m/s.
The total momentum prior to and following a collision are identical in a closed system.
From the principle of conservation of momentum,
M × U + m × u = M × V + m × v ----(1)
Where,
M = Mass of the bowling ball (M = 8 kg)
m = Mass of the pin (m = 2 kg)
U = Initially, the bowling ball's speed
u = Initial velocity of the pin (u = 0 m/s)
V = Final velocity of the bowling ball (V = 2 m/s)
v = Final velocity of the pin (v = 8 m/s)
Substitute these values in (1) and to solve U:
8(U)+2(0) = 8(4)+2(8)
8U = 32 + 16
8U = 48
U = 6 m/s
Thus, the initial velocity of the bowling ball is calculated to be 6 m/s.
To know more about velocity:
https://brainly.com/question/19589618
#SPJ4
The Atwood’s machine shown consists of two blocks of mass m1 and m2 that are connected by a light string that passes over a pulley of negligible friction and negligible mass. The block of mass m1 is a distance h1 above the ground, and the block of mass m2 is a distance h2 above the ground. m2 is larger than m1. The two-block system is released from rest. Which of the following claims correctly describes the outcome after the blocks are released from rest but before the block of m2 reaches the ground?
When the two-block Atwood's machine system is released from rest, the block of mass m1 accelerates downwards due to the force of gravity and the block of mass m2 accelerates upwards. This is because the mass of m2 is greater than the mass of m1, meaning m2 is the heavier object and thus the object that accelerates upwards. This is a result of Newton's Third Law of Motion, which states that for every action there is an equal and opposite reaction. As the block of m2 accelerates upwards, the block of m1 accelerates downwards, allowing the two blocks to move in opposite directions.
In addition, the acceleration of the two blocks is determined by the difference in masses, with the larger mass (m2) having the smaller acceleration. This is due to Newton's Second Law of Motion, which states that the acceleration of an object is equal to the force acting on it divided by its mass. As m2 has the larger mass, it has a smaller acceleration.
Before the block of m2 reaches the ground, the acceleration of both blocks will be constant. This is because there is no friction between the two blocks, meaning the force acting on them will remain constant. The two blocks will continue to move in opposite directions, and the heavier mass will continue to accelerate at a slower rate than the lighter mass.
In conclusion, when the Atwood's machine is released from rest but before the block of mass m2 reaches the ground, the two blocks will move in opposite directions with constant acceleration. The larger mass will have the smaller acceleration due to Newton's Second Law of Motion.
For more such questions on Newton's Third Law of Motion
https://brainly.com/question/1657470
#SPJ11
Applied force in garlic and effect of action applied
When a force is applied to an object, it can cause a change in the object's motion or state of rest.
If the force is unbalanced, it can cause the object to accelerate or decelerate, resulting in a change in speed or direction. The effect of the applied force depends on the mass and nature of the object, as well as the magnitude and direction of the force. Additionally, the object may experience other effects, such as deformation or compression, depending on the type and direction of the force applied. Understanding the effects of applied forces is crucial in fields such as engineering, physics, and mechanics.
To know more about engineering, here
brainly.com/question/19117846
#SPJ4
--The complete question is, When force is Applied on an object describe effect of action applied. --