A chemist reported that 100 gallons of a gas were available in a laboratory. Which property of the gas did the chemist report?
O Length
O Mass
O Temperature
O Volume

The process orcas uses the oxygen is from the blowholes. the blow holes are situated on the top of of the head and it uses oxygen from their.

The whales and the humans uses the lungs for the respiration or to get oxygen required for the breathing. the orcas uses the oxygen from the blow holes situated at the top of the head. The orcas lives under the water and when the orcas dive in the water they have ability to hold the breath for at the time . but this is not good for the health . it is be very stressful for the body.

Thus, the process do the orcas uses oxygen for the intake is the from the blow holes.

To learn more about orcas here

https://brainly.com/question/29784862

#SPJ4

A neutral atom and has 14 protons is Silicon

Each of the elements in the Periodic Table has an individual atomic number, or a specific number of protons in its nucleus.

The total number of protons that make up an atom's nucleus is represented by the atomic number of that atom, as is well known. We know that an atom has proton of 14, so the atomic number  of that neutral atom is 14. we can check on the periodic table an atom that have 14 atomic number is silicon.

Therefore, the neutral atom and has 14 protons is Silicon

Learn more about proton at https://brainly.com/question/1379579

#SPJ4

According to the electronic configuration and shielding effect along a group barium  requires the least amount of energy to give up an electron when forming chemical bonds.

Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.

Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.

Learn more about electronic configuration,here:

https://brainly.com/question/29757010

#SPJ1

Answer:

A. Barium

Explanation:

The higher the metallic character, the less energy needed to give up an electron.

The metallic character is higher in the higher period numbers and in the lower group numbers. Out of all the elements listed, Barium would require the least amount of energy.

Answer:

it can predict the properties of new elements, because it organizes the elements according to their atomic numbers.

Creating new elements is not a simple process. Scientists use a particle accelerator to smash light atoms into a thin metallic foil that contains heavier atoms. They hope that the two nuclei at the centre of these atoms will fuse and form a heavier nucleus.

When these heavy elements form, they are usually highly unstable. They decay so quickly that we don’t usually see the element itself. Instead, we see a decay product. In that respect, even new elements aren't always 'discovered' directly. In some cases, scientists haven’t synthesized enough of the element for us to know what the element even looks like! Nevertheless, we consider the elements as known. We name them and list them the periodic table.

For example, in 2003, scientists first observed element 115 (ununpentium, Uup) They bombarded americium-243 with calcium-248 ions and produced four atoms of Uup, which lived for less than one fifth of a second.

₂₀ ⁴⁸Ca + ₉₅²⁴³Am → ₁₁₅²⁸⁸Uup + 3 ₀¹n

It took until September 2013 for the discovery to be confirmed, and about 50 atoms have been synthesized to date.

We can predict the properties of Uup because the Periodic Table organizes elements according to their atomic number.

To determine the pressure of a gas, we need to use the ideal gas law, which states that PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

We can re-arrange the ideal gas law to solve for pressure:

P = (nRT) / V

We are given that the density of the gas is 3.10 g/L, which we can use to calculate the volume of the gas. Density is defined as mass/volume, so we can rearrange the equation to find volume:

V = mass/density

We know the density is 3.10 g/L, and the mass is n * molar mass of N2O.

Molar mass of N2O = (14.01 + 2 * 16.00) g/mol = 44.01 g/mol

The volume of the gas is:

V = mass / density = n * molar mass of N2O / 3.10 g/L

Now we have all the information needed to use the ideal gas law to determine the pressure of the gas.

We are given that the temperature of the gas is 298K.

We can use the ideal gas constant R = 0.0821 Latm/molK

Plugging in the known values:

P = (nRT) / V = (n * 0.0821 Latm/molK * 298K) / (n * molar mass of N2O / 3.10 g/L)

P = (0.0821 * 298) / (44.01 / 3.10) atm

To convert the pressure in atm to mmHg, we need to multiply the pressure by 760 (1 atm = 760 mmHg)

P = (0.0821 * 298) / (44.01 / 3.10) * 760 mmHg

The pressure of the N2O gas is approximately 739.07 mmHg at 298K and density of 3.10 g/L.

Learn more about Ideal Gas Law here: https://brainly.com/question/28257995

#SPJ4

The initial amounts of x and y required to form solid xy are 1 mol of x and 1 mol of y.

The initial amount is the starting point for any financial transaction.

In order to calculate the initial amounts of x and y that will result in the formation of solid xy, the following equation must be used:
nx = ny * (4.1/kp)
where nx and ny are the moles of x and y, respectively, and kp is the equilibrium constant of the reaction.
Given the information provided, we can calculate the moles of x and y:
nx = ny * (4.1/4.1) = ny
ny = (22.4 L * 1 mol/22.4 L) = 1 mol
Therefore, nx = 1 mol and ny = 1 mol.
This means that if the reaction is carried out in a 22.4 L container, the initial amounts of x and y required to form solid xy are 1 mol of x and 1 mol of y.

To learn more about initial amount
https://brainly.com/question/26988374
#SPJ4

The isostasy is relates to  the buoyancy , the deepest oceans depths relates to the trench, the theory of the crustal structure relates to the plate tectonics.

The match  the following for the given options are given below as follows :

1 ) isostasy                               buoyancy

2) deepest ocean depths        trench

3) drowned glaciated valley     fjord

4) theory of crustal structure   tectonic plates

5)  oceanic plate going down   subduction

The above are the correct order for the given following relations. these given options are related to the earth movement. like isostasy is the rising or the settling of the part of the earth's lithosphere.

To learn more about tectonic plates here

https://brainly.com/question/998575

#SPJ4

A vitamin supplement is a dietary supplement containing one or more essential vitamins, typically in the form of a pill, capsule, or tablet.

What are Vitamins?

Vitamins are a group of organic compounds that are essential for normal cellular functioning. They are required for a wide range of bodily functions, such as metabolism, growth, development, and immunity. They can be found naturally in food sources or taken as dietary supplements. There are 13 essential vitamins, including vitamins A, C, D, E, K, and the B vitamins.

The mass of fluorine that can be recovered from the vitamin is 455.9 mg (50.51% of 900 mg). The mass of iron that can be recovered from the vitamin is 444.1 mg (the remaining amount of 900 mg).

To calculate this, we need to use the percent composition formula:

Mass of Element = (Percent Composition/100) x Total Mass

Mass of Fluorine = (50.51/100) x 900 mg = 455.9 mg

Mass of Iron = (100 - 50.51)/100 x 900 mg = 444.1 mg.

To know more about vitamins,

https://brainly.com/question/9348916

#SPJ4

We need to take 5ul of stock solution and add it to 5ul of diluent to achieve a final concentration of 100ug/L.

To solve this problem, you will need to create a stock solution of the chemical substance and then dilute it to the desired concentrations. Here's one way you could approach it:

Create a stock solution by dissolving the 5mg of powder in a solvent with a 2g/L solubility. We know that the solubility of the substance is 2g/L, so we can use the formula:

Stock solution concentration = (mass of substance) / (volume of solvent)

In this case, the mass of the substance is 5mg and the volume of solvent is 1L. So, the stock solution concentration is:

5mg / (1L) = 5mg/L

Dilute the stock solution to the desired concentration for the first dose of 10ug/L. To do this, we can use the formula:

Desired concentration = (volume of stock solution) / (volume of diluent)

In this case, we want a final concentration of 10ug/L, so we'll let the volume of stock solution be x and the volume of diluent be (5ul-x). Then we can set up the equation:

10ug/L = (x) / (5ul-x)

Solving this equation:

x = 0.5ul

Therefore, we need to take 0.5ul of stock solution and add it to 5ul of diluent to achieve a final concentration of 10ug/L

Dilute the stock solution to the desired concentration for the second dose of 100ug/L. Using the same formula as before:

Desired concentration = (volume of stock solution) / (volume of diluent)

In this case, we want a final concentration of 100ug/L, so we'll let the volume of stock solution be y and the volume of diluent be (10ul-y). Then we can set up the equation:

100ug/L = (y) / (10ul-y)

Solving this equation:

y = 5ul

Therefore, we need to take 5ul of stock solution and add it to 5ul of diluent to achieve a final concentration of 100ug/L

So, you can create a stock solution by dissolving 5mg of powder in a solvent with 2g/L solubility and obtain a stock solution of 5mg/L. With this stock solution, you can create two dilutions, the first one is 10ug/L by adding 0.5ul of stock solution to 5ul of diluent, and the second one is 100ug/L by adding 5ul of stock solution to 5ul of diluent.

Learn more about stock solution in brainly.com/question/25256765

#SPJ1

When gas is removed from a container with a fixed volume, the number of gas particles decreases, so there are fewer collisions and thus less pressure.

Additionally, the remaining gas particles have more space to move around, which also leads to a decrease in pressure. This can be visualized in the drawing by the decrease in the number of gas particles and the increased distance between them as gas is removed from the container.

As the gas particles decrease, there are fewer particles to collide with the walls of the container and therefore less force is exerted on the walls. This results in a decrease in the pressure inside the container.

Read more about the behavior of gases:

https://brainly.com/question/13649307

#SPJ4

KI - Ionic compound, KCl -Ionic compound,

C₆H₁₂O₆ - Covalent compound, C₆H₄Cl₂ - Covalent compound,  

KNO₃ - Ionic compound, C₆H₅COOH - Covalent compound

CH₃COOH - Covalent compound, Paraffin wax - Covalent compound

HCl - Covalent compound

Ionic compounds are formed from the interaction between cation ions and anions. A cation of an atom can be described as an electropositive ion and can donate valence electrons. Similarly, anions of an atom are electronegative ions and can accept electrons.

In an ionic compound, there is a complete transfer of electrons in the formation of an ionic bond, therefore, there exists an electrostatic force of attraction between the ions that forms a strong bond.

In a covalent compound, there is the mutual sharing of electrons in the covalent bonds. The shared electrons are hard to give away as nuclei of two atoms together share the electrons and create a bond stronger.

Learn more about the ionic and covalent compound, here:

brainly.com/question/12144907

#SPJ1

Answer:

The ion with the largest size is Cs+.

Explanation:

The size of an ion is determined by the number of electrons it contains and the arrangement of those electrons in its electron cloud. Ions with a larger number of electrons will generally have a larger size because their electron clouds will be more diffuse and occupy more space. Ions with a smaller number of electrons will have a smaller size because their electron clouds will be more compact.

In general, ions in the same group of the periodic table will have a similar number of valence electrons and will be similar in size. For example, the F- ion and the O-2 ion both belong to Group 17 and have 7 valence electrons, so they are expected to be similar in size. Similarly, the Cs+ and Al+3 ions both belong to Group 1 and have a single valence electron, so they are also expected to be similar in size.

However, the Cs+ ion is much larger than the Al+3 ion because it has a larger number of total electrons. Cs+ has 55 electrons, while Al+3 has only 13 electrons. The larger number of electrons in Cs+ results in a more diffuse electron cloud and a larger overall size. Therefore, among the ions listed, Cs+ has the largest size

Li2O > K2O > Rb2S is the order of given compounds lattice energy in the increasing order

Lattice energy is a measure of the strength of the electrostatic attraction between the positively charged cations and negatively charged anions in an ionic compound. The greater the lattice energy, the stronger the electrostatic attraction and the more stable the compound.The most common method for determining lattice energy is the Born-Haber cycle. This method uses thermochemical data of the individual steps in the formation of an ionic compound to calculate the lattice energy. However, it is often impractical to use this method in a test environment, so a more practical method that is used to compare lattice energies of different compounds is the use of the Coulomb's law which relates the lattice energy to the charge product of the cations and anions and the distance between them.

Learn more about  lattice energy here:

https://brainly.com/question/29441166

#SPJ4

There are 5,944 carbon atoms in 2.12 moles of propane, and 15,528 hydrogen atoms in 2.12 moles of propane.

What is carbon?

Carbon is an element that occurs in nature and is essential for life. It is the fourth most abundant element in the universe and is present in all living organisms. Carbon exists in many different forms, including graphite, diamond, amorphous carbon, and fullerenes. Carbon is a key component of organic molecules, which are the building blocks of life. Carbon also plays an important role in the global carbon cycle.

To learn more about carbon
https://brainly.com/question/26150306
#SPJ4

Answer:Angelica currently works on energy efficiency programs for Nexant, Inc, an Arizona-based company focused on clean energy solutions.

Explanation:

The 1.5 ml of a 10% solution that was made into a 3.0 ml solution by adding normal saline now has a new concentration of 5%.

The amount of material in a certain area is referred to as concentration in chemistry. Another definition states that concentration is the ratio of a solution's solute to its entire solution or solvent. Mass per unit volume is a common way to express concentration. However, moles or units of volume can also be used to express the solute concentration. Concentration could be per unit mass instead of volume. Concentration can be computed for any mixture, despite often being used with chemical solutions.

By mathematically dividing the mass, moles, or volume of the solute by the mass, moles, or volume of the solution, one may calculate the concentration (or, less commonly, the solvent).

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ4

Formal charge for nitrogen atoms I, II, and III, respectively in the azide provided is 0, +1, and -1

A formal charge, in the covalent chemical bonding, refers to the hypothetical charge assigned to an atom in a molecule, based on the assumption that electrons in all chemical bonds are shared equally between atoms, regardless of relative electronegativity. In other words, formal charge is defined as the difference between the number of valence electrons of an atom in a neutral free state and the number assigned to that atom in a Lewis structure. It is given as

Formal charges = Group variance – nonbonding electrons – ½ bonding electron

For the nitrogen atom I,

Formal charges =5 – 2 – ½ (6) = 0

For the nitrogen atom II,

Formal charges =5 – 0 – ½ (8) = 1

For the nitrogen atom III,

Formal charges =5 – 4 – ½ (4) = -1

Note: The question is incomplete as it is missing the figure which is attached.

Learn more about Formal charge:

https://brainly.com/question/28446255

#SPJ4

Answer: Correct option is B . calcium and iron  decrease the absorption of lead in the body.

Explanation: calcium and iron  decrease the absorption of lead in the body without affecting its solubility,probably by competing for shared absorptive receptors in the intestinal mucosa. The total body burden of lead does not affect lead absorption. Thus, lead does not have a feedback mechanism which limits absorption.

The moles of ammonia needed to produce 1.3 mole of water is 0.84 mol.

balance chemical equation for the reaction

[tex]4NH_{3}+5O_{2}- > 4NO +6H_{2}O[/tex]

In chemistry, stoichiometry is the measurement of the ratios in which different substances or elements interact. The laws of conservation of mass, energy, and weights or volumes serve as the foundation for the rules used to determine stoichiometric relationships.

stoichiometric moles of ammonia reacting = [tex]\frac{moles}{stoichiometry}[/tex]

stoichiometric moles of water reacting = [tex]\frac{1.3}{6} =0.21[/tex]

0.21 stoichiometric moles of water is given by 0.21 stoichiometric moles of water

so moles of ammonia will form = stoichiometric moles * stoichiometry

moles of ammonia will form = 0.21 * 4  = 0.84 mol

so moles of ammonia produced by reaction = 0.84 mol

Learn more about moles

brainly.com/question/26416088

#SPJ4

Answer:

Explanation:

Most chlorine atoms contain 18 neutrons as mole ratio of chlorine-35 and chlorine-37 is more than 1.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

let the moles of chlorine-35 is n1 and chlorine-37 is n2

now we will use the formula of average atomic mass

M=n₁M₁+n₂M₂/n₁+n₂

let say, n₁/n₂=x

substitution gives,35.45=x(35)+37/x+1 which on solving gives x=3.44

since mole ratio is more than 1, that's why most chlorine atoms have 18 neutrons.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ1

Carbon 1: δ = 2.09 ppm (The C1 atom is a methyl group, and is in a tertiary environment, which typically corresponds to a chemical shift of around 2.09 ppm).

Chemical shift is a term used in NMR spectroscopy to describe the relative difference in the resonance frequency of a nucleus in a molecule compared to a reference frequency.

2. Carbon 2: δ = 11.81 ppm (This is the carbonyl carbon, and is in a sp2 hybridized environment, which typically corresponds to a chemical shift of around 11.81 ppm).
3. Carbon 3: δ = 13.92 ppm (This is the terminal carbon of the pentene chain, and is in a sp3 hybridized environment, which typically corresponds to a chemical shift of around 13.92 ppm).
4. Carbon 4: δ = 16.53 ppm (The C4 atom is a methylene group, and is in a secondary environment, which typically corresponds to a chemical shift of around 16.53 ppm).
5. Carbon 5: δ = 17.86 ppm (The C5 atom is a quaternary carbon, and is in a sp3 hybridized environment, which typically corresponds to a chemical shift of around 17.86 ppm).

To learn more about chemical shift
https://brainly.com/question/8171972
#SPJ4

Answer:

Yellow

Explanation:

The color of the equilibrium mixture of Iodine Monochloride and Chlorine is yellow. When the mixture is heated, it becomes darker brown in color.

Answer:46 moles of carbon dioxide and 12 moles of ethane.

Explanation:

46 moles of carbon dioxide and 12 moles of ethane.

A non-flammable, colorless gas, carbon dioxide is. While being far less common in the atmosphere than nitrogen and oxygen, carbon dioxide plays a crucial influence in determining the composition of the air on our planet.

Carbon dioxide, a colourless gas having a faint sharp odour and a sour taste. It is one of the most important greenhouse gases linked to global warming, but it is a minor component of Earth’s atmosphere .

It is formed in combustion of carbon-containing materials, in fermentation, and in respiration of animals and employed by plants in the photosynthesis of carbohydrates.

Therefore, 46 moles of carbon dioxide and 12 moles of ethane.

To learn more about carbon dioxide, refer to the link:

https://brainly.com/question/3049557

#SPJ1

Yes, calcium oxide (CaO) reacts with carbon monoxide (CO) to form calcium carbonate (CaCO3) and oxygen gas (O2). The reaction can be represented by the following equation:

CaO + CO -> CaCO3 + O2

This reaction is an example of a chemical change, as it results in the formation of a new substance with different chemical properties. The reaction is also exothermic, meaning that it releases heat.

Calcium oxide is a white solid that is used in a variety of applications, including cement production and the purification of flue gases. Carbon monoxide is a colorless, odorless gas that is toxic to humans when inhaled. It is produced as a byproduct of the incomplete combustion of fossil fuels.

Hope This Helps You!

The fourth and fifth periods contain 18 elements rather than 8 as observed in the second and third period because of the accommodation of 10 additional electrons in the 3d orbital.

The number of orbitals that can be accommodated by s subshell is one, p subshell is three, d subshell is five and f subshell is seven.

In the second and the third period, the 2s subshell is filled with two electrons, 2p subshell with six electrons .So, the second period contains eight elements. The sequence in third period is similar to that of second period with additional filling of 3s and 3p subshell.

In the fourth period, electrons are first filled in the 4s subshell, only after that they can be filled in the 3d subshell. So, fourth period contains 18 elements , which is due to the additional 10 electrons in 3d subshell. This is similar in the case of fifth period also.

To know more about fourth and fifth period elements here

https://brainly.com/question/23277752

#SPJ4

The number of moles of the aluminum oxide that is produced is 4.5 moles.

We have to look at the stoichiometry of the reaction. In this case, we can see that there is a combination between the aluminum and the oxygen and then we have a product as have been shown in the equation that we have in the question.

From the equation, we know that;

4 moles of oxygen produces 2 moles of aluminum oxide

9 moles of oxygen produces x moles of aluminum oxide

x = 9 * 2/4

x = 4.5 moles

Learn more about stoichiometry:https://brainly.com/question/30218216

#SPJ1

Answer: its actually 4

Explanation:

A compound is found to contain 43.64 % phosphorus and 56.36 % oxygen by weight The molecular weight for this compound is 283.88 g/mol. is the molecular formula for this compound is P₂O₅.

Given that :

mass of the oxygen = 56.36 %

molar mass of the oxygen = 16 g /mol

moles of the oxygen= mass / molar mass

                                          = 56.36 / 16

                                          = 3.52 mol

mass of the phosphorus = 43.64 %

molar mass of the phosphorus = 31 g/mol

moles of the phosphorus = 43.64 / 31

                                         = 1.41 mol

dividing by the smallest one :

moles of the phosphorus = 1 = 2

moles of the oxygen = 2.5 = 5

The molecular formula is P₂O₅.

To learn more about molecular formula here

https://brainly.com/question/9529491

#SPJ4

Answer:

Term

Liquid    C) takes the shape and volume of an entire container

Plasma    A) charged particles that do not have a definite shape or volume

Solid    B) has a fixed volume and shape

Gas    D) assumes the shape of the part of the container from the bottom up