A firm current ratio is 1. 0 and its quick ratio is 1. 0. If current liabilities are 12300 then its inventories will be 12300
Inventory is the accounting of items, component parts and raw materials that a company either uses in production or sells
The quick and current ratios are liquidity ratios that help investors and analysts gauge a company's ability to meet its short-term obligations. The current ratio divides current assets by current liabilities. The quick ratio only considers highly-liquid assets or cash equivalents as part of current assets.
current ratio = current assets / current liabilities
current assets = current ratio * current liabilities
= 1 * 12300 = 12300
since , inventory is a current asset for accounting purpose , hence inventories will be 12300
To learn more about current ratios
https://brainly.com/question/19579866?referrer=searchResults
#SPJ4
If the platinum-based engine is run continuously at 300 k for 1 hour with 0.50 atm of h2 and 0.50 atm of o2 injected for each reaction, approximately what mass of water will be produced?
About 4.5 mol of water will be created when the platinum-based engine is run continuously at 300 K for an hour with 0.5 atm of H2 and 0.5 atm of O2 injected for each reaction.
For fuel cell engines' electrodes, platinum is a requirement. It acts as an electrocatalyst to speed up the electrochemical reactions needed to induce H2 to release electrons and form H2 ions when it is placed on porous electrodes.
Platinum is particularly well suited as a fuel cell catalyst because it makes it possible for the hydrogen and oxygen reactions to occur at an ideal rate and because it is stable enough to withstand both the intense electrical current density and the complex chemical environment found inside a fuel cell. This allows platinum to function effectively over an extended period of time.
To learn more about platinum please visit -
https://brainly.com/question/15614668
#SPJ4
If the ocular lens magnifies a specimen 10x, and the objective lens used magnifies the specimen 35x. What is the total magnification being used to observe the specimen?
Answer:
350x^2
Explanation:
I'm assuming you're saying you're using them together, like stacking them on top of each other, so if that's the case then this is a simple multiplication problem, which can be written as 10x(35x). Solve it and you get 350x^2.
What does the word apparent mean in apparent visual magnitude
The word 'apparent' mean in apparent visual magnitude is, how bright the star appears when viewed from Earth.
What is visual magnitude?
The brightness of a celestial body is determined by eye estimation with or without optical aid or by other instrumentation equivalent to the eye in spectral sensitivity.
Apparent magnitude:
Apparent magnitude is a measure of how bright the star appears when viewed from Earth.It is a measure of the brightness of a star or other astronomical object observed from Earth. An object's apparent magnitude depends on its intrinsic luminosity and its distance from Earth.Hence,
The word 'apparent' mean in apparent visual magnitude is, how bright the star appears when viewed from Earth.
Learn more about visual magnitude here:
https://brainly.com/question/14782876
#SPJ4
If a car increases its velocity from +6 m/s to +30 m/s in 6 seconds, its acceleration in m/s2 is__________.
Answer:
4m/s^2Explanation:
v = 30m/s, u = 6m/s, t = 6s
Change in velocity = v(final velocity) - u (initial velocity)
v-u = 30-6 = 24m/s
acceleration = (v-u)/t
(24m/s)/6s = 4m/s^2
A 1.5 kg ballistic cart, moving at 2.8 m/s, ejects a 25 g ball vertically with an initial velocity of 6.5 m/s. What is the magnitude of the initial velocity of the ball relative to the ground?
a. 2.8 m/s
b. 9.3m/s
c. 7.1 m/s
d. 6.5 m/s
The magnitude of the initial velocity of the ball relative to the ground is 9.3 m/s.
What is relative velocity?Relative velocity is the velocity of an object relative to another moving in the same plane. On frame of reference is used when measuring relative velocity.
The velocity of the ball relative to the ground is the sum of the velocity of the ballistic cart and the velocity in which the ball is ejected.
The velocity of the ball relative to the ground = 6.5 m/s + 2.8 m/s = 9.3 m/s
In conclusion, relative velocity measures the velocity of an object from a reference point.
Learn more about relative velocity at: https://brainly.com/question/24337516
#SPJ1
Which would require the greater energy; slowing down of the orbital speed of the Earth so it crashes into the sun, or speeding up the orbital speed of the Earth so it escapes the sun
Answer: Speeding up the orbital speed of earth so it escapes the sun require the greater energy.
Explanation: To find the answer, we need to know more about the Orbital and escape velocities.
What is Orbital and Escape velocity?Orbital velocity can be defined as the minimum velocity required to put the satellite in its orbit around the earth.The expression for orbital velocity near to the surface of earth will be,[tex]V_o=\sqrt{gR}[/tex]
Escape velocity can be defined as the minimum velocity with which a body must be projected from the surface of earth, so that it escapes from the gravitational field of earth.The expression for orbital velocity will be,[tex]V_e=\sqrt{2gR}[/tex]
If we want to get into the sun, we want to slow down almost completely, so that your speed relative to the sun became almost zero.We need about twice the raw speed to go to the sun than to leave the sun.Thus, we can conclude that, the speeding up the orbital speed of earth so it escapes the sun require the greater energy.
Learn more about orbital and escape velocity here:
https://brainly.com/question/28045208
#SPJ4
A bungee jumper jumps from a bridge and starts accelerating towards a lake below. What energy transfer is he experiencing?
Group of answer choices
a. Elastic potential to kinetic
b. Kinetic to elastic potential
c. Kinetic to gravitational potential
d. Gravitational potential to kinetic
D. The energy transfer he is experiencing is Gravitational potential to kinetic.
Energy transferred experienced by the bungee jumper
The bungee jumper possesses gravitational potential energy due to his position above the ground level (on a bridge).
As he starts accelerating towards a lake below, his gravitational potential energy will be converted into kinetic energy.
Thus, the energy transfer he is experiencing is Gravitational potential to kinetic.
Learn more about gravitational potential energy here: https://brainly.com/question/1242059
#SPJ1
A pulley system is used to lift a 4500 n weight using a 900 n force. if the mass moves 1.0m while the pulley is pulled 6.0m, what is the efficiency of the machine?
The efficiency of the machine is determined as 83.3 %.
Mechanical advantage of the pulley
M.A = load/Effort
M.A = 4500/900 = 5
Velocity ratio of the pulleyV.R = distance moved by effort/distance moved by load
V.R = 6/1 = 6
Efficiency of the pulleyE = M.A/V.R x 100%
E = (5/6) x 100%
E = 83.3 %
Thus, the efficiency of the machine is determined as 83.3 %.
Learn more about efficiency here: https://brainly.com/question/15418098
#SPJ1
A vehicle that weights 400 n on the surface of the earth is traveling in outer space at a speed of 400 m/s. It can be stopped by applying a constant force of 20 n for:_____.
A vehicle that weights 400 n on the surface of the earth is traveling in outer space at a speed of 400 m/s. It can be stopped by applying a constant force of 20 n for 800 secs.
Newtons 3 law whilst one object exerts pressure on any other object, the second object exerts a force on the first item this is identical in significance, but opposite in course; for each movement, there is an identical, but opposite response; referred to as the law of action-reaction.
You can use the equal formulation d = rt because of this distance equals the price instance's time. To solve for speed or rate use the components for pace, s = d/t this means that pace equals distance divided by way of time. To clear up for time use the components for time, t = d/s this means that time equals distance divided by way of velocity.
Learn more about force here: https://brainly.com/question/25573309
#SPJ4
The radial velocity method preferentially detects: Choose one: A. all of the above described planets equally well. B. small planets far from the central star. C. small planets close to the central star. D. large planets close to the central star. E. large planets far from the central star.
The radial velocity method preferentially detects large planets close to the central star
what is the Radial velocity:The radial velocity technique is able to detect planets around low-mass stars, such as M-type (red dwarf) stars.
This is due to the fact that low mass stars are more affected by the gravitational tug of planets.
When a planet orbits around a star, the star wobbles a little.
From this, we can determine the mass of the planet and its distance from the star.
hence we can say that,
option D is correct.
The radial velocity method preferentially detects large planets close to the central star
Learn more about radial velocity here:
https://brainly.com/question/13117597
#SPJ4
If a 100 ω resistor is placed across a 0. 10 μf charged capacitor which is initially charged to 3 v. How long does it take it to discharge to 2v to 1v?
1. The time taken to discharge to 2 V is 2×10⁻⁹ s
2. The time taken to discharge to 1 V is 5×10⁻¹⁰ s
Energy stored in a capacitorThe energy stored in a capacitor is given by
E = ½CV²
But
E = Pt
Thus,
Pt = ½CV²
Where
E is the energy C is the capacitorV is the voltageP is the power t is the timeWith the formula (Pt = ½CV²), we can determine the time in each case. Detail below:
1. How to determine the time required to discharge to 2 VData obtained from the question include:
Power (P) = 100 wCapacitor (C) = 0.10 μF = 1×10⁻⁷ FVoltage (V) = 2 VTime (t) = ?Pt = ½CV²
100 × t = ½ × 1×10⁻⁷ × 2²
Divide both sides by 100
t = (½ × 1×10⁻⁷ × 2²) / 100
t = 2×10⁻⁹ s
Thus, the time required to discharge to 2 V is 2×10⁻⁹ s
2. How to determine the time required to discharge to 1 VData obtained from the question include:
Power (P) = 100 wCapacitor (C) = 0.10 μF = 1×10⁻⁷ FVoltage (V) = 1 VTime (t) = ?Pt = ½CV²
100 × t = ½ × 1×10⁻⁷ × 1²
Divide both sides by 100
t = (½ × 1×10⁻⁷ × 1²) / 100
t = 5×10⁻¹⁰ s
Thus, the time required to discharge to 1 V is 5×10⁻¹⁰ s
Learn more about energy stored in a capacitor:
https://brainly.com/question/14739936
#SPJ1
If you will be rinsing your regulator after removing it from the cylinder, you must make sure that the ______ ______ is firmly in place. Select one: Mouthpiece plug Alternate-air-source retainer Dust cap None of the above
If you will be rinsing your regulator after removing it from the cylinder, you must make sure that the dust cap is firmly in place.
What is Dust cap?A dust cap is a gently curved dome mounted either in concave or convex orientation over the central hole of most loudspeaker diaphragms.
Thus, if you will be rinsing your regulator after removing it from the cylinder, you must make sure that the dust cap is firmly in place.
Learn more about dust cap here: https://brainly.com/question/10723016
#SPJ1
A 150 g piece of metal has a specific heat capacity of 0.845 J/g°C. If it takes 3.30x 103 J to heat the metal to 120°C, the initial temperature of the metal was
The initial temperature of the metal was 94.24⁰C.
Initial temperature of the metal
The initial temperature of the metal is calculated as follows;
Q = mcΔθ
where;
Δθ is change in temperatureΔθ = Q/mc
Δθ = (3,300) / (0.854 x 150)
Δθ = 25.76⁰C
Δθ = T₂ - T₁
T₁ = T₂ - Δθ
T₁ = 120 - 25.76
T₁ = 94.24⁰C
Thus, the initial temperature of the metal was 94.24⁰C.
Learn more about initial temperature here: https://brainly.com/question/25009858
#SPJ1
A graph with vertical axis Energy Unit and horizontal axis Amplitude Unit. A line goes in straight segments from 1 16 to 2 9 to 4 1.
Tara prepared a report to show how the amplitude of waves affects the energy of waves. Is her graphical representation correct? Why or why not?
The graphical representation of Tara is correct because of energy of the wave depends on the amplitude of the wave.
Energy of a waveThe energy of a wave due to the motion of a spring is calculated as follows;
E = ¹/₂KA²
where;
k is the force constant of the springA is the amplitude of the waveThus, the graphical representation of Tara is correct because of energy of the wave depends on the amplitude of the wave.
Learn more about amplitude here: https://brainly.com/question/3613222
#SPJ1
Answer: No, it is not correct because as the amplitude of a wave increases, the energy it carries also increases. This graph shows that as the amplitude increases, the energy decreases.
Explanation:
What is accurate about the planet’s climate system?
The accurate about the planet’s climate system is the wind
because heating near the equator blows the wind to drive the convection cells in the atmosphere, and the friction created by the rotation of the spherical planet in the atmosphere causes the wind to appear to bend left or right across the surface of the planet. ..
The climate system is a highly complex global system consisting of five major components: the atmosphere, the ocean, the cryosphere (cryosphere), the land surface, the biosphere, and the interactions between them.
Solar energy drives the climate by heating the surface of the earth unevenly. Ice also reflects incoming sunlight, further cooling the poles. Temperature differences move the ocean and atmosphere as they work together to disperse heat throughout the globe.
Learn more about the planet’s climate system here:https://brainly.com/question/15351986
#SPJ4
An astronaut in training is seated at the end of a horizontal arm 8 meters long. How many revolutions per second must the arm make for the astronaut to experience a horizontal acceleration of 4.0g
Answer:
a = v^2 / R where a is the centripetal acceleration and R the radius
v = 2 π R N / t where (N / t) is the revolutions / sec giving distance / time
a = 4 g horizontal acceleration
4 g = (2 π R N / t)^2 / R = 4 π^2 * R * (N / t)^2
(N / t)^2 = g / (π^2 * R)
N / t = 1 / π * (g / R)^1/2 = .318 * (9.80 m / s^2 / 8 m)^1/2 = .352 / sec
A substance has life of 40 years. In how many years will the substance disintegrate to 1/8 of its initial size
Answer:
5 years
Explanation:
[tex]\frac{1}{8}(40)\\\\= 5[/tex]
5. a new type of hoverboard has been designed to levitate over a copper surface. the
developers had a skateboard icon test out the hoverboard on a copper halfpipe.
what type of field is responsible for levitating the hoverboard and rider as it
traverses the half pipe?
a-magnetic field
b-gravitational field
c-electric field
d-tesla field
The magnetic field is responsible for levitating the hoverboard and rider as it traverses the half pipe.
What is a magnetic field?The magnetic field is defined as the field the magnetic materials generate or when an electric charge moves in a field region that generates the magnetic field.The surface is made up of from the copper and copper is conductor of electricity.When an electrical charge moves, it generates a magnetic field. As with electrical current running via a wire, the spinning and orbiting of an atom's nucleus produces a magnetic field.Thus, the magnetic field is responsible for levitating the hoverboard and rider as it traverses the half pipe.What is the characteristics of Magnetic fields?Magnetic field lines never cross one another.They begin (from the north pole) and end (to the south pole) perpendicular to the surface of the magnet. Magnetic field lines also run through the magnet.The magnetic field is denser at the poles and less dense as we move away from them.A single magnetic pole does not exist. Magnetic poles are always found in pairs of opposing poles.Learn more about the magnetic field here:
https://brainly.com/question/23096032
#SPJ4
Arrange these objects according to size, largest to smallest. Group of answer choices traditional dwarf elliptical, ultra-compact dwarfs, globular clusters ultra-compact dwarfs, traditional dwarf galaxies, globular clusters globular clusters, traditional dwarf elliptical, ultra-compact dwarfs globular clusters, ultra-compact dwarfs, traditional dwarf elliptical
Among the given objects, the largest one is dwarf elliptical, then ultra-compact dwarf and then globular clusters. Thus, option a is correct.
To find the correct answer, we need to know about the galaxies.
Are galaxies bigger than globular clusters?Globular clusters are spherical groups of stars that are primarily located in the spiral galaxy' stellar halo. There are 150 or so globular clusters in our Milky Way galaxy, some of which house our galaxy's oldest stars.Globular clusters are much smaller than galaxies.a system of gas and dust, as well as millions or billions of stars, kept together by gravitational attraction is called galaxy.Ultracompact dwarfs are more extended and have higher surface brightness than typical dwarf nuclei.Dwarf elliptical galaxies are elliptical galaxies that are smaller than ordinary elliptical galaxies. They are quite common in galaxy groups and clusters and are usually companions to other galaxies.Thus, we can conclude that, option a is correct.
Learn more about the galaxies here:
https://brainly.com/question/1458203
#SPJ1
a bat emitts a sonar sound wave (343 m/s) that bounces off a mosquito 8.42 m away
The time lapse between when the bat emits the sound and when it hears the echo is 0.05 s.
From the question given above, the following data were obtained:
Velocity of sound (v) = 343 m/s
Distance (x) = 8.42 m
Time (t) =?
We can obtain obtained the time as illustrated below:
v = 2x / t
343 = 2 × 8.42 / t
343 = 16.84 / t
Cross multiply
343 × t = 16.84
Divide both side by 343
t = 16.84/343
t = 0.05 s
Thus, the time between when the bat emits the sound and when it hears the echo is 0.05 s.
How does a bat know how far away something is?A bat emits a sound wave and carefully listens to the echoes that return to it. The returning information is processed by the bat's brain in the same way that we processed our shouting sound with a stopwatch and calculator. The bat's brain determines the distance of an object by measuring how long it takes for a noise to return.
Learn more about time elapses between when the bat emits the sound :
https://brainly.com/question/16931690
#SPJ4
Correction question:
A bat emits a sonar sound wave (343 m/s) that bounces off a mosquito 8.42 m away. How much time elapses between when the bat emits the sound and when it hears the echo? (Unit = s)
What happens within a protostar to create a star?
Clouds of gas in space
A protostar resembles a star, but its core is still too cool for fusion to occur. The protostar's heating as it contracts is the only source of brightness. The light that protostars release is typically blocked by dust, making them challenging to study in the visible spectrum.
By the time a protostar is produced, the cloud has flattened and a protostellar disk is spinning around it. The cloud starts spinning as it collapses. These disks occasionally form planetary systems and are thought to slow the protostar's rotation. The protostar produces a powerful magnetic field as it revolves.
Additionally, a strong protostellar wind—a movement of particles into space—is produced by the magnetic field. A lot of protostars also release gas into space in the form of fast-moving streams or jets.
To learn more about Protostars please visit -
https://brainly.com/question/7849717
#SPJ1
A copper penny has a mass of 3.0 g. A total of 4.0 × 1012 electrons are transferred from one neutral penny to another. If the electrostatic force of attraction between the pennies is equal to the weight of a penny, what is the separation between them?
Answer:
F = K Q1 Q2 / R^2 = m g
Q1 = - Q2 = (4E12 * 1.60E-19) = 6.4E-7 coulombs
Q^2 = 4.10E-13
R^2 = 9.0E9 * 4.1E-13 / (.003 * 9.80) = 36.9E-4 / 2.94E-2
R^2 = .126
R = .35 m
F = K Q1 Q2 / R^2 = m g, Q1 = - Q2 = (4E12 * 1.60E-19) = 6.4E-7 coulombs Q^2 = 4.10E-13, R^2 = 9.0E9 * 4.1E-13 / (.003 * 9.80) = 36.9E-4 / 2.94E-2 R^2 = .126 and R = .35 m.
What is Electrostatic force?Due to their electric charges, particles can be attracted to or repelled by electrostatic forces. This force is also known as the Coulomb force or Coulomb contact, and it was first described in 1785 by French physicist Charles-Augustin de Coulomb.
Over a distance of 10-16 meters, or roughly one-tenth the diameter of an atomic nucleus, the electrostatic force is present. While opposite charges attract one another, like charges repel one another.
For instance, two positively charged protons, two negatively charged electrons, or two anions all repel one another. Cation and anions, as well as protons and electrons, are all attracted to one another.
Therefore, F = K Q1 Q2 / R^2 = m g, Q1 = - Q2 = (4E12 * 1.60E-19) = 6.4E-7 coulombs Q^2 = 4.10E-13, R^2 = 9.0E9 * 4.1E-13 / (.003 * 9.80) = 36.9E-4 / 2.94E-2 R^2 = .126 and R = .35 m.
To learn more about Force, refer to the link:
https://brainly.com/question/13191643
#SPJ2
The period of a satellite, the time it takes for a complete revolution, depends on the satellite's: _________
The period of a satellite, the time it takes for a complete revolution, depends on the satellite's mass of planet and the distance of satellite form center of the planet .
According to the question
The period of a satellite, the time it takes for a complete revolution, depends on the satellite's:
1. The mass of the planet being orbited
2. The distance of the satellite from the center of the planet.
Hence, The period of a satellite, the time it takes for a complete revolution, depends on the satellite's mass of planet and the distance of satellite form center of the planet .
To know more period of a satellite about here:
https://brainly.com/question/14502000
#SPJ4
A car goes around a curve at a constant speed. what is the direction of the net force on the car?
Answer:
The direction of the net force is at a tangent to the circle.
a 1200 kg car rolling on a horizontal surfact has a speed of 25 m/s when it strikes a horizontal coiled spring and is brought ot rest in a distance of 2.5m. what is the spring constant of this spring
The required spring constant:
The spring constant of the spring is [tex]12\times 10^4 \text{ N/m}[/tex].
Calculation:
The mass of the car is m=1200 kg, the speed of the car is v=25 m/s, and after colliding the spring is brought to rest at a distance of x=2.5m. Let the spring constant of the spring is, k.
From the conservation of energy,
Total initial kinetic energy= Total final potential energy of the spring
Therefore,
[tex]\frac{1}{2}mv^2=\frac{1}{2}kx^2[/tex]
Now, substituting the values of the mass of the car, speed of the car, and displacement, we get:
[tex]$$\begin{aligned}1200\times(25)^2&=k\times (2.5)^2\\\Rightarrow k&=\frac{1200\times(25)^2}{(2.5)^2}\\&=12\times 10^4 \text{ N/m}\end{aligned}$$[/tex]
To know more about spring constant, refer to:
https://brainly.com/question/14159361
#SPJ4
How does the distance between adjacent orbits in a hydrogen atom vary with increasing values of the orbital number n?
The distance between adjacent orbits in a hydrogen atom vary with increasing values of the orbital number n because:
Option C: The energy difference between adjacent orbit radii decreases with increasing values of the principal quantum number.What determines the distance of the electrons from the nucleus?In an atom, an electron is known to be attracted to a given nucleus by the use of "electromagnetic force".
Note that similar to a baseball, the faster the electron is said to go, the farther away from the nucleus it is known to be seen. Therefore, the electrons in an atom are known to be in a state where they are moving a lot and very fast, so they are said to be far away from their nucleus.
Note also that energy difference between what we call consecutive levels tends to often decreases as well as increases.
Therefore, The distance between adjacent orbits in a hydrogen atom vary with increasing values of the orbital number n because:
Option C: The energy difference between adjacent orbit radii decreases with increasing values of the principal quantum number.Learn more about hydrogen atom from
https://brainly.com/question/4597871
#SPJ1
See full question below
Consider the hydrogen atom. How does the distance between adjacent orbits in a hydrogen atom vary with increasing values of the orbital number n?
The distance difference between adjacent orbit radii varies with increasing values of the principal quantum number.
The distance difference between adjacent orbit radii increases with increasing values of the principal quantum number.
The distance difference between adjacent orbit radii remains constant with increasing values of the principal quantum number.
The distance difference between adjacent orbit radii decreases with increasing values of the principal quantum number.
A 5 cm radius conducting sphere has a charge density of 2.0x10-6 C/m2 on its surface. Find the electric potential of the sphere.
noob anyways I can't get u vape because first reason I lost ur money and second I felt bad for losing ur and I will not on yourself as I am thinking of a number my number is a multiple of 6.What other numbers must my number is a multiple of 6.What other numbers
2. Find rectangular coordinates for the point (6, 240°).
Answer:
(-3, -3√3)
Explanation:
To convert from polar coordinate to rectangular coordinate, first you have to know these two equations:
[tex]\displaystyle{x=r\cos \theta}\\\displaystyle{y=r\sin \theta}[/tex]
We know that (x,y) is in rectangular coordinate form while (r,θ) is in polar coordinate form.
Therefore, substitute r = 6 and θ = 240° in both equations:
[tex]\displaystyle{x=6\cos 240^{\circ}}\\\displaystyle{y=6\sin 240^{\circ}}[/tex]
After evaluating, you'll get:
[tex]\displaystyle{x=-3}\\\displaystye{y=-3\sqrt{3}}[/tex]
Therefore, substitute x and y in rectangular coordinate form - hence, the answer is (-3, -3√3)
Does your experimental density of the unknown liquid agree with the true value? if no, give reasons for the discrepancy. Do not include operator errors
The reasons for the discrepancy in the experimental density of the unknown liquid agree with the true value can be instrument not having same levels , Temperature Effects , Kind of scales used and Shape of objects used for measure .
According to the question
Discrepancy:
The state or quality of being discrepant or in disagreement, as by displaying an unexpected or unacceptable difference; inconsistency.
Density:
Density is mass per unit volume, so when measuring density, you find the mass of the object and divide it by its measured volume.
All measurements include some uncertainty, however, and certain kinds of errors can increase the uncertainty in your calculation.
The reason of discrepancy in the experimental density of the unknown liquid agree with the true value can be:
1. Use of instrument not having same levels
2. Temperature Effects as Density varies with temperature .
3. Kind of scales used for measures
4. Shape of objects used for measure .
Hence, the reasons for the discrepancy is instrument not having same levels , Temperature Effects , Kind of scales used and Shape of objects used for measure .
To know more about discrepancy and density here:
https://brainly.com/question/13651668
#SPJ4
Why might the measurements of ""true distances"" be different for different groups even though they are measuring the same distance?
While measuring , there are a lot of errors which can happen due to which ""true distances"" be different for different groups even though they are measuring the same distance.
While measuring , there are a lot of errors which can happen , to find the most correct value in order to make the result precise and accurate number of measurements needed to be done in order to reduce the error
As nothing can be measured with full precision and accuracy, different measurements for different groups even though they are measuring the same distance.
To learn more about accuracy here
https://brainly.com/question/14244630?referrer=searchResults
#SPJ4