Answer:
Node-Antinode for a pipe closed at one end (fundamental)
The length of such a pipe would be wavelength / 4
lambda (wavelength) = speed / frequency = 344 m/s / 63 / sec = 5.46 m
The pipe would have to be 5.46 / 4 = 1.36 m
the place from which motion is observed and measured is called
Answer:
A frame of reference is the location from which motion is perceived and measured. For all observers, the speed of light remains constant.
Explanation:
The place from which motion is observed and measured is called frame of reference .
What is a frame of reference?Frame of reference is an abstract coordinate system whose origin , orientation , and scale are specified by a set of reference points .
The place from which motion is observed and measured is called frame of reference . The set of conditions that determine how to approach or observe something will depend on its reference frame .
In order to know the change in position of an object , a reference point is required . example : in a cartesian system origin is the reference . With respect to origin only every other things are observed .
A coordinate system with time frame is called frame of reference
Learn more about frame of reference
https://brainly.com/question/12222532?referrer=searchResults
#SPJ3
Two 4 kg blocks hang from a rope that passes over two frictionless pulleys . What is the tension in the horizontal portion of the rope if the blocks are not moving and the rope and the two pulleys have negligible mass?
The tension in the horizontal portion of the rope provided the blocks are not moving and the rope has negligible mass is 40 N
The tension in the rope is a pulling force that acts on the rope when the mass of 4kg is placed on each side of the two frictionless pulley.
According to Newton's second Law;
Force = (Tension) = mass × acceleration due to gravity
∴
We can say:
Tension = 4kg × 9.81 m/s²
Tension = 39.24 N
Tension = 40 N (to the nearest whole number)
Therefore, we can conclude that the tension in the horizontal portion of the rope is 40 N
Learn more about Newton's Law here:
https://brainly.com/question/3715235?referrer=searchResults
A car starts from rest, then accelerates at 1.20 m/s2 for 7.00 s. It hits the brakes,
slowing to a stop at a rate of -4.25 m/s2.
What is the total distance travelled?
Answer:
the answer is 4.15 m/s2
Explanation:
4.15 m/s2
Why capillary happen.
Why is wrestling ring floor always softThis is physics
Answer:
So the people in the ring don't get hurt or break anything on impact once they hit the floor
What is a thought experiment?
Answer:
A thought experiment is an experiment carried out only in the imagination
Explanation:
Train car A is at rest when it is hit by train car B. The two cars, which have the same mass, stick together and move off after the collision. How does the final velocity of train cars A and B after the collision compare to the initial velocity of train car B before the collision?.
The value of the final velocity of train cars A and B after the collision compare to the initial velocity of train car B before the collision is [tex]v = \frac{ \ m_bv_b_1}{m_a \ + \ m_b}[/tex].
According to the principle of conservation of linear momentum, the total momentum before and after collision is conversed.
[tex]m_av_a_1 + m_bv_b_1 = v(m_a + m_b)[/tex]
where;
[tex]v_a_1 \ \ and \ \ v_b_1[/tex] are the initial velocity of the cars before collisionv is the final velocity of the cars after collisionsince the train car A is at rest, [tex]v_a _1 = 0[/tex]
[tex]m_bv_b_1 = v(m_a + m_b)[/tex]
The relationship between the final velocity and initial velocity of the cars is given as;
[tex]v = \frac{ \ m_bv_b_1}{m_a \ + \ m_b}[/tex]
Thus, the value of the final velocity of train cars A and B after the collision compare to the initial velocity of train car B before the collision is [tex]v = \frac{ \ m_bv_b_1}{m_a \ + \ m_b}[/tex].
Learn more about conservation of linear momentum here: https://brainly.com/question/22698801
Answer: the answer is the third option. Edge 2021
Explanation: i just answered the problem
dark energy has been hypothesized to solve which problem?
Answer:
The expansion of the universe is accelerating.
Explanation:
The first hill of a roller coaster is 42.0 meters high. The bottom of the first hill is 4.2 meters off the ground.The roller coaster cart has a mass of 4500 kg.
Calculate its potential energy at the top of the first hill.
Calculate its potential energy at the bottom of the first hill.
Challenge- What is the velocity of the cart at the bottom of the first hill?
Answer:
1.89*10⁶J
Explanation:
because 4500kg * 42m*10m/s² is 1890000J
How to calculate work in chemistry.
Answer:
look on the bottom
Explanation:
Is it only the math or the physics/physical concepts that you don't get?
In this problem, you have a constant pressure of 1.00 atm. This being the case, it is an isobaric system (constant pressure), and so you have the equation that work (W) = -pressure(P) x change in volume (∆V)
This is written as W = -P∆V and is known as pressure-volume work.
Now, understand the conventions that are used.
-If work is done ON the system, it has a positive sign (+)
-If work is done BY the system, it has a negative sign (-)
In this problem, the gas is being compressed, i.e. the volume decreases, and so work is being done ON the system. Thus, the sign of W is positive (+). This comes out automatically because of negative sign in front of P∆V, So, we have W = -P∆V and substituting values, we have
W = -(1.00 atm)(1.5L - 1.25L) = -(1.00 atm)(0.25L) = -0.25 L-atm
Converting this to joules, we get -0.25 L-atm x 101.3 J/L-atm = -25.3 J (note the negative sign) Hope this all helps a little.
The potential energy stored in the compressed spring of a dart gun, with a spring constant of 32. 50 N/m, is 0. 640 J. Find by how much is the spring is compressed.
The spring in the dart gun is compressed by 0.16 m
From the question given above, the following data were obtained:
Spring constant (K) = 50 N/m
Potential Energy (PE) = 0.640 J
Compression (e) =?The compression experience by the spring can be obtained as follow:
PE = ½ke²
0.64 = ½ × 50 × e²
0.64 = 25 × e²
Divide both side by 25
e² = 0.64 / 25
Take the square root of both side
e = √(0.64 / 25)
e = 0.16 m
Therefore, the spring is compressed by 0.16 m
Learn more: https://brainly.com/question/14848315
which term is most applicable to a discussion of angular momentum in the context of black holes?
A: Photon
B: Curvature
C: Spin
D: Time
Answer:
c: spin
Explanation:
it's not curvature
The most applicable term to a discussion of angular momentum in the context of black holes is Spin. Thus, the correct option is C.
What is angular momentum of black holes?
Angular Momentum is defined as the property of any rotating object which is given by the product of the moment of inertia of an object and the angular velocity of the rotating object. Angular momentum is a vector quantity and it has both the magnitude and direction. The examples of angular momentum are the rotation and revolution of the Earth.
When the astronomers claim that they have estimated the spin of a black hole, this means they have measured its angular momentum. This is the total angular momentum of all the materials on the Universe that ever crossed the event horizon and got trapped inside it.
Therefore, the correct option is C.
Learn more about Angular momentum here:
https://brainly.com/question/29563080
#SPJ2
A bus slams on its breaks and goes from 30km/hr to 15km/hr in 4 seconds. What is its acceleration?
Answer:
− 2.08
Explanation:
The high energy yields created by nuclear fission are due to
A. Binding nuclei
B. Chain reactions
C. Hydrogen bonding
D. Secondary recovery
Answer:
Nuclear fission of heavy elements produces exploitable energy because the specific binding energy (binding energy per mass) of intermediate-mass nuclei with atomic numbers and atomic masses.
Explanation:
have a great day!! :)
Help me out with this physics please!!!
Answer: It was on between 7 and 7.30 and also between 8 and 8.30 (when the line on the graph goes up only). So it was on for an hour or 60 minutes
Help ! will give Brainliest to who Answer first.
Acceleration is a ______ quantity.
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The Correct statement is ~
Acceleration is a vector quantity.
Answer:
Acceleration is a vector quantity.
A cyclist accelerates from 0m/s to 8m/s in 3 seconds.
Answer:
the rate of acceleration is 2.6666(and so on) if thats your question
Explanation:
7. A bus covers a certain distance in 60 minutes if it runs at a speed of 60 km/hr.
What must be the speed of the bus in order to reduce the time of journey by 40
minutes?
Answer:
90 Km/h
Explanation:
60 mins is 1 hr
so in an hour bus covers 60 Km
so new speed:
d/t
(60km/40mins)*60mins/h
90Km/h
pluto is part of the kuiper belt. what captured moon likely originated in the kuiper belt?
moon Triton, Neptune's largest moon Triton
The moon Triton is the captured moon which most likely originated in the Kuiper belt.
What is Kuiper belt?This is defined as a donut-shaped region beyond Neptune and has an extension from 30 to 50 AU or more from the Sun.
The moon Triton is the captured moon which originates from this belt thereby making it the most appropriate choice.
Read more about Kuiper belt here https://brainly.com/question/14154493
How does the distance between the planet and the Sun affect its period?
Answer:
The closer a planet is to the sun, the shorter its period of revolution. The farther away a planet is from the sun, the longer its period of revolution.
Explanation:
i hope that helps, have a great day.
Answer:
The closer a planet is to the sun, the shorter its period of revolution. The farther away a planet is from the sun, the longer its period of revolution. so it depends on how close and how far it is to have a different time period. so if the if it is close then the period of revolution will be shorter because they need more space to have a longer period. if it is spaced out then it will have a longer period because they do have space.
Explanation:
A car weighs 14500 N. What is its mass?
Answer:
w = mg
14500 = m ×10 [g=10m/s2]
m =14500/10
m=1450kg
How much energy must be transferred out of the system as heat q to lower its temperature to 0∘c?.
Answer:
2.20 × 104 J
Explanation:
How much energy must be transferred out of the system as heat Q to lower its temperature to 0?C? ANSWER Q = 2.20 x 10^4. Cooling Power of P is 36.6 W.
What is conduction?explain?
Answer:
Thermal conduction is the transfer of internal energy by microscopic collisions of particles and movement of electrons within a body. The colliding particles, which include molecules, atoms and electrons, transfer disorganized microscopic kinetic and potential energy, when joined known as internal energy.
Explanation:
sana makatulong
definiciones de estrés
Answer:
dame la marca más inteligente, por favor
Explanation:
En el campo de la medicina, es la respuesta del cuerpo a una presión física, mental o emocional. El estrés produce cambios químicos que elevan la presión arterial, la frecuencia cardíaca y las concentraciones de azúcar en la sangre. También suele producir sentimientos de frustración, ansiedad, enojo o depresión.
Answer:
El estrés es la reacción del cuerpo al sentirse amenazado o bajo presión.
Explanation:
1. if the work done to move a box to a distance of 6 metres equals 120 joules. calculate the force
2. Calculate the potential energy of a book with a mass of 1.5 kg placed on top of a shelf with a height of 2 m.
(Knowing that the acceleration due to gravity = 10 m/s2
).
3. What is meant by?
The potential energy of an object = 20 joules.
Explanation:
1. W = F x D
F = W/D
F = 120/6 = 20Newton
2. P. E = mgh
P. E = 1.5x10x2 = 30Joules
3. It means that the energy the body possesses at that point is 20Joules
Which of the following is NOT true of a hotspot?
Given what we know about hotspots and their characteristics, we can confirm that the option that is false regarding hotspots is "A. Hotspots are constantly moving forming chains of volcanoes".
In regards to the study of geology, we refer to hotspots as spots in an oceanic mantle where magma located below causes them to become intensely hot. This heat forces magma and therefore the mantle itself upwards as a tectonic plate moves across the spot, and therefore results in the formation of volcanic chains. Some very popular examples of volcanoes and volcanic islands formed by this method include:
Yellowstone National ParkHawaiiThe country of IcelandDespite the other options being true, option A is false given that hotspots are stationary elements of the oceanic mantle. Although some scientists believe that there is evidence of the movement of hotspots, this movement is slow enough to not be taken into account.
This question was answered in regards to the complete question found online which states:
Which of the following is NOT TRUE about hotspots? a. Hotspots are constantly moving forming chains of volcanoes.
b. Hotspots are stationary.
c. Hotspots form volcanic island arcs
d. Hotspots lie along an oceanic plate
To learn more visit:
https://brainly.com/question/264008?referrer=searchResults
Which wave has the longest wavelength?
Answer:
A Wave red
Explanation:
Answer:
Answer: Wave E
Explanation:
Why because if you put each in a strait line it would have been longer
hope it helps
explain properties and importance of light and how it separates into colours
Answer:
White light can be separated into different colors using a special lens called a prism. As visible light passes from air into the glass, the change in medium causes a change in direction and speed. Refraction causing the separation of white light into its various color wavelengths is called dispersion.
hope this helps
A child, m = 25. 0 kg, swings from a rope, l = 9. 43 m, which hangs above water, d = 1. 9 m, when vertical. The child is h = 4. 8 m above the water when she begins to swing.
The velocity at the bottom of the swing is [tex]\mathbf{v= \sqrt{2gh -2gd}}[/tex]. The time it took the child to reach the river is 0.62 seconds.
The objective of this question is to determine:
The expression for the velocity of the child at the bottom of the swing.Suppose the child lets go at the bottom of the swing, how long does she take to reach the river at t seconds.At the bottom of the swing, there is an equal change in both the Kinetic energy as well as the potential energy and the expression can be computed as:
[tex]\mathbf{\dfrac{1}{2}mv^2 = mg (h -d)}[/tex]
[tex]\mathbf{\dfrac{v^2}{2}= g (h -d)}[/tex]
[tex]\mathbf{v^2= 2gh -2gd}[/tex]
[tex]\mathbf{v= \sqrt{2gh -2gd}}[/tex]
According to the second equation of motion;
[tex]\mathbf{S = ut +\dfrac{1}{2}at^2}[/tex]
where;
distance s = d = 1.9 macceleration due to gravity = 9.8 m/s²initial velocity (u) = 0∴
[tex]\mathbf{1.9 = 0(t) +\dfrac{1}{2}(9.8) t^2}[/tex]
[tex]\mathbf{1.9 = \dfrac{1}{2}(9.8) t^2}[/tex]
[tex]\mathbf{t^2 =\dfrac{1.9\times 2}{9.8} }}[/tex]
[tex]\mathbf{t = \sqrt{\dfrac{1.9\times2}{9.8}}}[/tex]
[tex]\mathbf{t =0.62 \ s}[/tex]
Therefore, we can conclude that the velocity at the bottom of the swing is [tex]\mathbf{v= \sqrt{2gh -2gd}}[/tex]. The time it took the child to reach the river is 0.62 seconds.
Learn more about velocity here:
https://brainly.com/question/13665920
A negative charge is paced in an electric field that points west. What direction is the force on the negative particle?
Answer:
A positive charge placed in an electric field will tend to move in the direction of the electric field lines and a negative charge will tend to move opposite to the direction of the electric field lines.
One way to remember this is that there is one velocity, and so the thumb represents it. There are many field lines, and so the fingers represent them. The force is in the direction you would push with your palm. The force on a negative charge is in exactly the opposite direction to that on a positive charge.
Explanation:
Answer:
The force of the negative particle direction is East.