A mixture of 0.327 M Cl 2 , 0.579 M F 2 , and 0.839 M ClF is enclosed in a vessel and heated to 2500 K . Cl 2 ( g ) + F 2 ( g ) − ⇀ ↽ − 2 ClF ( g ) K c = 20.0 at 2500 K Calculate the equilibrium concentration of each gas at 2500 K .

The best material for numerical dating using the radioactive decay of carbon-14 is organic material, such as bone, wood, shell, and other remains.

Carbon-14 is a radioactive isotope of carbon that has a half-life of about 5,730 years. This means that when it decays, its levels will be halved after 5,730 years. Carbon-14 is present in the atmosphere and is absorbed by living organisms during their lifetime. After the organism dies, it no longer absorbs new carbon-14, so the carbon-14 levels in the remains remain constant over time. Scientists can use this information to measure the age of the remains by measuring the remaining carbon-14 levels. This type of dating is known as radiocarbon dating or carbon-14 dating. Organic material is best suited for this type of dating because it is the only material that can absorb and contain carbon-14. Inorganic material such as rocks and minerals does not contain carbon-14, so they are not suitable for carbon-14 dating.

For more such questions on radioactive decay

https://brainly.com/question/23959901

#SPJ11

The complete question is

Which of the following would be best suited to the carbon-14(C) dating technique?

a. materials more than 100,000 years old

b. volcanic rock

c. sedimentary rock

d. metals

e. certain organic materials less than 75,000 years old

The primary distinction between these two negotiation strategies is that distributive negotiation does not take into consideration the demands of the other party when negotiating a settlement.

In a competitive negotiation style known as distributive bargaining, one party only gains when the other party loses.

Positional negotiating involves both sides criticising one other's proposals in an effort to convince the other that theirs is the best. By engaging in interest-based negotiation, both (or all) sides approach the problem and search for a solution that best advances their individual interests.

To know more about solution visit:-

https://brainly.com/question/29015830

#SPJ1

In any organic redox reaction, the reduced and oxidized molecules can be identified by the difference in charge between the products and the reactants. Reduction results in an increase in charge, while oxidation causes a decrease in charge.

Redox is a sort of chemical process in which the oxidation states of the substrate change . When electrons are lost or the oxidation state increases, it is called oxidation; when they are gained or the oxidation state decreases, it is called reduction.

Redox reactions fall into one of two categories:

Only one electron (typically) moves from the reducing agent to the oxidant during an electron transfer. It is common to talk about this kind of redox reaction in terms of redox couples and electrode potentials.

A transfer of an atom occurs when one substrate gives way to another. For instance, as iron rusts, the oxidation state of the iron atoms increases as the iron transforms into an oxide, while the oxidation state of oxygen falls as it absorbs oxygen. Other chemical species can perform the same function, despite the fact that oxidation reactions are frequently linked to the production of oxides. Hydrogen atoms are transferred during the hydrogenation process to diminish C=C (and other) bonds.

For example, if a reaction produces a molecule with a +1 charge and a reactant with a -1 charge, the product has been reduced and the reactant has been oxidized.

For more such questions on redox reaction , Visit:

https://brainly.com/question/21851295

#SPJ11

The volume of the 0.10 molL⁻¹ NaCl solution which contains 0.1 mole of sodium chloride, NaCl is 1 L

Molarity of a solution is defined by the following formula:

Molarity = mole / volume

Cross multiply

Molarity × volume = Mole

Divide both sides by molarity

Volume = mole / molarity

With the above formula, we can obtain the volume of the solution. Details below:

Volume = mole / molarity

Volume of solution = 0.1 / 0.1

Volume of solution = 1 L

Thus, we can conclude that the volume of the solution is 1 L

Learn more about volume:

https://brainly.com/question/29144710

#SPJ1

Complete question:

0.10 molL⁻¹ NaCl solution contains 1.0 mole of NaCl​. What is the volume of the solution?

The empirical formula, CH2O9(menthol) is multiplied by 5 to get the molecular formula, C10H20O.The empirical and molecular formula for menthol are CH2O and C10H20O, respectively.

The molecular formula for menthol is C5H10O.

This can be determined by dividing the molar mass of the empirical formula (156.26 g/mol) by the molar mass of CO2 (44.01 g/mol). This gives a ratio of 3.55, which is equal to the ratio of C atoms in the empirical formula, C10H20O.

Therefore, the molecular formula is C5H10O.
Given:

Menthol is composed of C, H, and O0.1005g sample of menthol is combusted and produces0.2829g of CO2 0.1159g H2O

1. Find: Empirical and molecular formula for menthol.

Let's first calculate the number of moles of CO2 produced. The balanced equation for combustion of menthol is:

C10H20O(s) + 12O2(g) → 10CO2(g) + 10H2O(l)

From the above equation, we can see that for 10 moles of CO2 produced 1 mole of menthol is required.

2. By taking the number of moles of CO2 produced, we can calculate the number of moles of menthol burned.

Moles of CO2 = 0.2829g / 44.01g/mol= 0.00643 mol

C10H20O(s) + 12O2(g) → 10CO2(g) + 10H2O(l)

From the balanced equation,1 mole of C10H20O requires 10 moles of CO2

Moles of C10H20O burned = 10 * 0.00643= 0.0643 mol

Next, we can calculate the number of moles of H2O produced.

Moles of H2O = 0.1159g / 18.015g/mol= 0.00643 mol

C10H20O(s) + 12O2(g) → 10CO2(g) + 10H2O(l)

From the balanced equation,1 mole of C10H20O requires 10 moles of H2O

Moles of C10H20O burned = 10 * 0.00643= 0.0643 mol

3. Now we can calculate the empirical formula of menthol. The empirical formula can be calculated as follows:

Empirical formula = CH2O (Divide all moles by smallest moles) The molecular weight of CH2O = 30 g/mol

The empirical formula mass of the compound is:

mass = (12.011 + 2*1.008 + 15.999) = 30.026

Empirical formula mass of CH2O is 30.026g/mol, and the given sample weighs 0.1005 g.
The number of empirical formula units in the sample is 0.1005 g / 30.026 g/mol = 0.003348Units.

Empirical formula = CH2OThe empirical formula weight of menthol is CH2O, which is equal to 30.026g/mol.

4. To find the molecular formula, we need to know the molecular weight of the menthol. We can calculate it as follows:

Molecular formula mass = Empirical formula mass x n

Where n = integer Molecular formula mass of menthol is 156 g/mol, and the empirical formula mass is 30.026 g/mol.

So, n = 156 g/mol ÷ 30.026 g/mol = 5.192

Thus the empirical formula, CH2O is multiplied by 5 to get the molecular formula, C10H20O.The empirical and molecular formula for menthol are CH2O and C10H20O, respectively.

For more such questions on empirical formula , Visit:

https://brainly.com/question/1603500

#SPJ11

The dissociation equation for lithium hydroxide (LiOH), a strong base, is: LiOH (s) → Li+ (aq) + OH- (aq) A dissociation equation is an equation that represents the dissociation of a compound into its ions when dissolved in a solvent.

In this case, LiOH dissociates in water to form Li+ and OH- ions. LiOH is a strong base because it dissociates almost completely in water, producing a high concentration of OH- ions. The dissociation of a strong base is represented by a one-way arrow in the equation, indicating that it proceeds almost completely in one direction.A two-way arrow, <--> , is used in equilibrium reactions, where the forward and reverse reactions occur at the same rate. This is not the case for the dissociation of strong bases like LiOH, where the reaction proceeds almost completely in one direction.

For more such questions on dissociation

https://brainly.com/question/29012577

#SPJ11

Answer:

B. 6

Explanation:

chatgpt

coursehero

carbon atom has six protons, six neutrons, and six electrons.

The maximum number of electrons that can occupy the 1s sub-shell is 2, the 3p sub-shell is 6, the 3d sub-shell is 10, and the 6g sub-shell is 32.

For the 1s sub-shell, due to the Pauli Exclusion Principle, two electrons of opposite spin can exist in the same orbital. This means that there is a maximum of two electrons that can occupy the 1s sub-shell. For the 3p sub-shell, three orbitals exist with a maximum of two electrons each. Since two electrons of opposite spin can occupy each orbital, there is a maximum of six electrons that can occupy the 3p sub-shell. For the 3d sub-shell, five orbitals exist with a maximum of two electrons each. Since two electrons of opposite spin can occupy each orbital, there is a maximum of 10 electrons that can occupy the 3d sub-shell. Finally, for the 6g sub-shell, seven orbitals exist with a maximum of two electrons each. Since two electrons of opposite spin can occupy each orbital, there is a maximum of 32 electrons that can occupy the 6g sub-shell.

To learn more about Electrons ;

https://brainly.com/question/11316046

#SPJ11

Option (d) is correct. Toluene undergo undergo nitration in HNO3/H2SO4 to yield a product mixture with the highest ortho : para ratio. Because toluene has less steric hindrance.

Toluene is defined as a substituted aromatic hydrocarbon. Toluene is a colorless, water-insoluble liquid with the smell associated with paint thinners. Toluene is a mono-substituted benzene derivative consisting of a methyl group attached to a phenyl group. The IUPAC name of toluene is methylbenzene. Steric hindrance is defined as the slowing of chemical reactions due to steric bulk. Steric hindrance manifested in intermolecular reactions whereas discussion of steric effects often focus on intramolecular interactions. It is often exploited to control selectivity such as slowing unwanted side-reactions.

To learn more about Toluene

https://brainly.com/question/8696404

#SPJ4

The complete question is,

Which of the following mono alkyl benzenes undergo nitration in HNO3/H2SO4 to yield a product mixture with the highest ortho : para ratio ?

A. ethylbenzene

B. propyl benzene

C. tert-butylbenzene

D. toluene

The correct answer is c. Single-Replacement.

Synthesis and Decomposition reactions can be reversible, meaning they can proceed in both the forward and reverse directions, whereas Single-Replacement reactions are typically irreversible, meaning they only proceed in one direction.

What is Decomposition?

This process is usually initiated by the addition of energy in the form of heat, light, or electricity, or by the action of a catalyst.

During a decomposition reaction, the original compound is broken down into its constituent parts, which can include elements, smaller molecules, or ions. For example, the decomposition of water (H2O) can produce hydrogen gas (H2) and oxygen gas (O2):

2H2O → 2H2 + O2

In a Single-Replacement reaction, one element replaces another element in a compound, forming a new compound and releasing a free element. This type of reaction is typically irreversible because once the replacement has occurred, it is difficult or impossible to reverse the process and put the original elements back together.

Learn more about Decomposition from given link

https://brainly.com/question/14608831

#SPJ1

To convert the volume of Substance A to the volume of Substance B at STP, you can use the principle of molar volume, which states that one mole of any gas at standard temperature and pressure (STP) occupies a volume of 22.4 liters. Here are the steps:

Determine the number of moles of Substance A using its volume and molar volume at STP:

Number of moles of Substance A = Volume of Substance A / Molar volume at STP (22.4 L)

STP stands for "Standard Temperature and Pressure," which is a set of standard conditions used for measuring and comparing physical and chemical properties of gases.

The standard temperature is typically defined as 0 degrees Celsius (273.15 Kelvin), while the standard pressure is typically defined as 1 atmosphere (atm) or 101.325 kilopascals (kPa). At STP, one mole of any gas occupies a volume of 22.4 liters.

STP is commonly used in chemistry and physics to compare gas volumes, to determine molar masses, and to calculate other properties of gases. It is also useful for converting between different units of gas volume, pressure, and temperature.

To know more about STP visit :

https://brainly.com/question/29356493

#SPJ1

Answer:

Some metalloids are liquids at room temperature.

They are all solid at room temperature.

Explanation:

You're welcome.

Answer: 55.5 oC is 0.014 atm (3rd decimal point)

Explanation:

The Clausius-Clapeyron equation is given as:

ln(P2/P1) = -(ΔH_vap/R) * (1/T2 - 1/T1)

where:

P1 = vapor pressure at temperature T1

P2 = vapor pressure at temperature T2

ΔH_vap = enthalpy of vaporization

R = gas constant = 8.314 J/(mol*K)

Converting the enthalpy of vaporization to J/mol:

ΔH_vap = 35.2 kJ/mol = 35,200 J/mol

Converting temperatures to Kelvin:

T1 = 64.7 + 273.15 = 337.85 K

T2 = 55.5 + 273.15 = 328.65 K

Substituting the values into the equation and solving for P2:

ln(P2/1 atm) = -(35,200 J/mol / 8.314 J/(mol*K)) * (1/328.65 K - 1/337.85 K)

ln(P2/1 atm) = -4.231

P2/1 atm = e^(-4.231)

P2 = 0.014 atm

Therefore, the vapor pressure for methanol at 55.5 oC is 0.014 atm, to the third decimal point.

Al3+ is reduced to elemental aluminum at the cathode, whereas magnesium metal is oxidized to Mg2+ at the anode. The balanced overall reaction of the cell is:3Mg + ||2Al3+ → 3Mg2+ + ||2Al

The half-cell reactions that take place at the cathode and anode of a galvanic cell in which Al3+ is reduced to elemental aluminum and magnesium metal is oxidized to Mg2+ are as follows:

Half-cell reaction at the cathode: 2Al3+ + 6e- → 2Al

Half-cell reaction at the anode: 3Mg → 3Mg2+ + 6e-

Galvanic cell is an electrochemical cell that drives spontaneous redox reactions to produce electrical energy. The given galvanic cell has the following half-cell reactions:half-cell reaction at the cathode: ||2A13+ + 6e- → 2AI half-cell reaction at the anode: 3Mg → 3Mg2+ + 6e-Thus, Al3+ is reduced to elemental aluminum at the cathode, whereas magnesium metal is oxidized to Mg2+ at the anode. The balanced overall reaction of the cell is:3Mg + ||2Al3+ → 3Mg2+ + ||2Al

For more such questions on aluminum

https://brainly.com/question/28082370

#SPJ11

A few statements may be true regarding a biochemical oxidation-reduction (redox) reaction. The statements are as follows: A redox reaction occurs when there is a transfer of electrons between molecules or atoms.

The electron donor becomes oxidized, and the electron acceptor is reduced, causing a transfer of energy. A redox reaction produces ATP, which is the primary energy currency of the cell. Oxidation and reduction are complementary reactions that occur simultaneously in the same reaction, resulting in the release of energy. Redox reactions are vital in metabolic pathways, and the electron carriers NAD+ and FAD+ are essential in these reactions. Oxygen is frequently used as a final electron acceptor in redox reactions. Redox reactions can also occur in non-cellular environments, such as photosynthesis, respiration, and combustion. The significance of redox reactions is enormous, and they play an essential role in sustaining life on earth. They help in generating energy, breaking down complex molecules, synthesizing molecules, and many other cellular processes.

To learn more about  Oxidation-reduction :

https://brainly.com/question/13892498

#SPJ11

Answer:

Calcium fluoride (CaF2): 11.06 g

Dinitrogen monoxide (N2O): 2.08 g

Hydrogen fluoride (HF): 5.68 g

Water vapor (H2O): 8.52 g

Explanation:

We can start by writing the balanced chemical equation for the reaction:

3 Ca(NO3)2 + 10 NH4F → 6 HF + 3 CaF2 + N2O + 10 H2O

This equation tells us that 3 moles of calcium nitrate (Ca(NO3)2) react with 10 moles of ammonium fluoride (NH4F) to produce 3 moles of calcium fluoride (CaF2), 1 mole of dinitrogen monoxide (N2O), 6 moles of hydrogen fluoride (HF), and 10 moles of water (H2O).

We can use the molar masses of each substance to convert the given masses into moles, and then use the mole ratios from the balanced equation to determine the moles of each product formed. Finally, we can convert the moles of each product back into masses using their respective molar masses.

Molar masses:

Ca(NO3)2 = 164.1 g/mol

NH4F = 37.04 g/mol

CaF2 = 78.08 g/mol

N2O = 44.01 g/mol

HF = 20.01 g/mol

H2O = 18.02 g/molMasses given:

m(Ca(NO3)2) = 16.8 g

m(NH4F) = 17.50 g

Converting masses to moles:

n(Ca(NO3)2) = m(Ca(NO3)2) / M(Ca(NO3)2) = 16.8 g / 164.1 g/mol = 0.1022 mol

n(NH4F) = m(NH4F) / M(NH4F) = 17.50 g / 37.04 g/mol = 0.4729 mol

Using the mole ratios from the balanced equation, we can determine the number of moles of each product formed:

n(CaF2) = 3/10 * n(NH4F) = 0.1419 mol

n(N2O) = 1/10 * n(NH4F) = 0.0473 mol

n(HF) = 6/10 * n(NH4F) = 0.2837 mol

n(H2O) = 10/10 * n(NH4F) = 0.4729 mol

Finally, we can convert the moles of each product back into masses:

m(CaF2) = n(CaF2) * M(CaF2) = 0.1419 mol * 78.08 g/mol = 11.06 g

m(N2O) = n(N2O) * M(N2O) = 0.0473 mol * 44.01 g/mol = 2.08 g

m(HF) = n(HF) * M(HF) = 0.2837 mol * 20.01 g/mol = 5.68 g

m(H2O) = n(H2O) * M(H2O) = 0.4729 mol * 18.02 g/mol = 8.52 g

Therefore, the mass of each substance present after the reaction is:

Calcium fluoride (CaF2): 11.06 g

Dinitrogen monoxide (N2O): 2.08 g

Hydrogen fluoride (HF): 5.68 g

Water vapor (H2O): 8.52 g

the final temperature of the system is 7.3°C.

21.16 mL of 0.250 M HNO3 is required to titrate (neutralize) a solution containing 0.297 g of KOH.

To solve this problem, we need to use the balanced chemical equation for the reaction between HNO3 and KOH, which is:

HNO3 + KOH → KNO3 + H2O

From the equation, we can see that one mole of HNO3 reacts with one mole of KOH.

First, we need to determine the number of moles of KOH in 0.297 g of KOH:

mass of KOH = 0.297 g

molar mass of KOH = 56.11 g/mol

number of moles of KOH = mass/molar mass = 0.297 g/56.11 g/mol = 0.00529 mol

Since one mole of HNO3 reacts with one mole of KOH, we need 0.00529 moles of HNO3 to neutralize the KOH.

Now, we can use the molarity and the number of moles of HNO3 to calculate the required volume of HNO3:

Molarity of HNO3 = 0.250 M

Number of moles of HNO3 = 0.00529 mol

Volume of HNO3 = Number of moles of HNO3/Molarity of HNO3

Volume of HNO3 = 0.00529 mol/0.250 mol/L

The volume of HNO3 = 0.02116 L or 21.16 mL

Therefore, 21.16 mL of 0.250 M HNO3 is required to titrate (neutralize) a solution containing 0.297 g of KOH.

learn more about moles here

https://brainly.com/question/15356425

#SPJ1

The functional group in alcohol is a hydroxyl group (-OH), in phenol, it is a hydroxyl group attached to a benzene ring, and in ether, it is an oxygen atom (-O-) between two alkyl or aryl groups.

Given that the question asks to identify each of the following compounds as an alcohol, a phenol, or an ether. The question seems to be incomplete as there are no options or compounds mentioned. However, given below is a general explanation of the three compounds -Alcohol: Alcohol is a compound that contains a hydroxyl functional group (-OH) that is attached to a carbon atom. The hydroxyl group in alcohol makes it polar and thus, able to form hydrogen bonds. Alcohol is used as a solvent, fuel, and disinfectant. Phenol: Phenol is an aromatic compound that contains a hydroxyl group (-OH) attached to a benzene ring. It is used in the production of detergents, plastics, and pharmaceuticals. Phenol is used as a disinfectant and anesthetic. Ether: Ether is an organic compound that contains an oxygen atom between two alkyl or aryl groups. It is a colorless, volatile, and highly flammable liquid that is used as a solvent and as a starting material in the synthesis of organic compounds. To identify a compound as an alcohol, phenol, or ether, we need to examine the functional groups in the molecule.

To learn more about Functional group :

https://brainly.com/question/696051

#SPJ11

Answer: NaAlF6

Explanation:

1) divide by the smallest number of moles

0.953/.322 =2.96 round to 3 Na

.322/.322 = 1 Al

1.93/.322 =5.99 round to 6 F

2) write in order numbers were give

NaAlF6

A)The number of moles of copper in the penny is 0.048 moles.

B)the mass of the undissolved penny is also 3.067 g.

C)the molarity of the Cu2+ ion in the solution is 0.192 M.

A. In order to calculate the number of moles of copper in the penny, we can use the following formula: moles of copper = mass (g) / molar mass (g/mol). The mass of the penny is 3.067 g and the molar mass of copper is 63.55 g/mol, so the number of moles of copper in the penny is 0.048 moles.

B. The undissolved penny is removed when the reaction stops. Since the mass of the penny is 3.067 g, the mass of the undissolved penny is also 3.067 g.

C. The molarity of the Cu2+ ion in the solution can be calculated using the following formula: molarity = moles of Cu2+ / volume of solution (L). The number of moles of Cu2+ is 0.048 moles, and the volume of the solution is 0.250 L, so the molarity of the Cu2+ ion in the solution is 0.192 M.

For more such questions on molarity

https://brainly.com/question/14469428

#SPJ11

Answer:

sub my channel pls

Explanation:

CoolBoiAmeen

The statement that is TRUE is: "Vinegar is moderate to highly acidic."

Vinegar has a pH of about 2-3, which indicates that it is an acidic substance. pH scale ranges from 0 to 14, where pH 0 is the most acidic.

Vinegar is a liquid consisting mainly of acetic acid and water. It is typically made through a fermentation process where sugar is first converted to alcohol by yeast and then further oxidized to acetic acid by bacteria.

Vinegar has been used for thousands of years as a condiment, preservative, and for medicinal purposes. It is commonly used in cooking, food preservation, and as a cleaning agent. Different types of vinegar can be made from various sources such as grapes, apples, rice, malted barley, and many others, and each type has a unique flavor and acidity level. Some popular types of vinegar include white vinegar, red wine vinegar, apple cider vinegar, and balsamic vinegar.

To know more about Vinegar visit :

https://brainly.com/question/15934865

#SPJ1

the arrows show the amount so sodium chloride is 38g at 40 degrees

The glycolytic intermediate that can be used directly for the synthesis of glycerol-3-phosphate is dihydroxyacetone phosphate (DHAP).

Glycolysis is a metabolic pathway that converts glucose into pyruvate, which can then be used for energy production through cellular respiration. It is a universal pathway that occurs in nearly all living organisms, including both aerobic and anaerobic organisms.

During glycolysis, glucose is converted into two molecules of pyruvate through a series of enzymatic reactions, with the production of ATP and NADH. The process begins with the phosphorylation of glucose by hexokinase to form glucose-6-phosphate, which is then converted into fructose-6-phosphate by the enzyme phosphohexose isomerase. This is followed by a series of reactions that involve the conversion of fructose-6-phosphate into glyceraldehyde-3-phosphate and then into pyruvate.

To know more about glycolysis visit :

https://brainly.com/question/30828407

#SPJ1

The element in question here is E, and its chemical formula with oxygen is EO2.  the electronic configuration of the ion formed from E in EO2 is 1s²2s²2p⁶.

Electronic configuration refers to the distribution of electrons among different energy levels and subshells of an atom. When E forms a compound with oxygen, it loses two electrons to form a cation with a 2+ charge. This cation is written as E2+ and has an electronic configuration of 1s²2s²2p⁶. The electronic configuration of E before it forms a compound with oxygen can be found by considering its position in the periodic table. E is in the third row and fourth column of the periodic table, which means that it has three energy levels and four valence electrons.

Therefore, its electronic configuration is 1s²2s²2p⁶3s²3p². When E forms a compound with oxygen, it loses two valence electrons from its outermost energy level, which is the third energy level in this case. This results in the formation of E2+ ions with an electronic configuration of 1s²2s²2p⁶. Thus, the electronic configuration of the ion formed from E in EO2 is 1s²2s²2p⁶.

Know more about electronic configuration here:

https://brainly.com/question/29564763

#SPJ11

All of the groups of substances involve the use of chemicals from the question that we have here.

Chemicals are essential to life and to many industries, including agriculture, medicine, manufacturing, and technology. They can be found in everyday objects such as food, clothing, electronics, and cleaning products.

Chemicals can be classified into various categories based on their properties, chemical structure, and uses. Some common categories of chemicals include:

Elements: Pure substances that cannot be broken down into simpler substances. Examples include carbon, oxygen, and gold.

Compounds: Substances composed of two or more elements chemically bonded together. Examples include water (H2O) and table salt (NaCl).

Read more on  chemicals here:https://brainly.com/question/11231920

#SPJ1

Which of the following groups of substances involve the use of chemicals? Indicate all that apply.

Check all that apply.

Which of the following groups of substances involve the use of chemicals? Indicate all that apply.Check all that apply.

A light-weight bicycle frame, food packaging, a car exhaust catalytic converter

Soap, shampoo, washing powder

Antiseptic cream, pain killers, energy drinks

Paints, printer toner, food coloring

Computer displays, LED lights, barcode readers

At 769 K, the rate constant equals 2.22 1/min.

The final expression is either k=A or k=A. This implies that the response rate will be equal to the value of the collision frequency rather than the temperature when the activation energy is zero.

The Arrhenius equation, which connects the rate constant (k) to the activation energy (Ea) and temperature (T), can be used to solve this issue:

[tex]A = * exp (-Ea / (R * T))[/tex]

With the rate constant (k) at 475 K, we can utilize this knowledge to calculate the pre-exponential factor (A) as follows:

0.0450 1/min = A * exp(-13.6 kJ/mol / (8.314 J/mol•K * 475 K))

[tex]A = 5.74 x 10^9 min^-1[/tex]

The rate constant (k) at 769 K can now be calculated using the Arrhenius equation once more as follows:

[tex]k = 5.74 x 10^9 min^-1[/tex] * exp(-13.6 kJ/mol / (8.314 J/mol•K * 769 K))

k = 2.22 1/min (rounded to two significant figures)

To know more about rate constant visit:-

https://brainly.com/question/20305871

#SWPJ1