A) Oxygen
B) water and oxygen
C) water and carbon dioxide
D) water and carbon monoxide

The shielding effect of bromine is greater than chlorine because there are more filled orbitals than in chlorine.

This is the process where by electrons are protected by the pull attraction of the nucleus with the use of electron shells. The shielding effect increases down the group of the periodic table and increases across the period. This is because when you move down the group, there's an increase in the number of shell by 1 and it helps to reduce the effect of nuclear attraction on the electrons. However when you move across the period, there's an increase in the numbers of electron with the same shielding electrons from group 1(a) across the period to group 7(a).

Shielding effect is primarily dependent on the numbers of electrons in the inner shells as well as the type orbitals.

Learn more about shielding effect here;

https://brainly.com/question/14040040

https://brainly.com/question/2984106

Answer:

15 millimeters

Explanation:

the other answer choices are too large.

Answer:

15 millimeters

Explanation:

The other options are too long.

Answer:

The collision theory states that a chemical reaction can only occur between particles when they collide (hit each other).

hope it helps~

[tex] \huge{ \color{magenta}{ \fcolorbox{magenta}{black}{ \huge{ \color{white}{ \fcolorbox{aqua}{black}{♡Answer♡ }}}}}}[/tex]

The Rutherford model shows that an atom is mostly empty space, with electrons orbiting a fixed, positively charged nucleus in set, predictable paths.

Answer:

The wavelength is 0.02 m.

Step-by-step explanation:

Given :

To Find :

Using Formula :

Apply Wavelength formula :

[tex]\star{\small{\underline{\boxed{\sf{\purple{\lambda = \dfrac{v}{f}}}}}}}[/tex]

Solution :

Finding the wavelength by substituting the values in the formula :

[tex]{\longrightarrow{\sf{\lambda = \dfrac{v}{f}}}}[/tex]

[tex]{\longrightarrow{\sf{\lambda = \dfrac{12}{600}}}}[/tex]

[tex]{\longrightarrow{\sf{\lambda = \dfrac{\cancel{12}}{\cancel{600}}}}}[/tex]

[tex]{\longrightarrow{\sf{\lambda = \dfrac{2}{100}}}}[/tex]

[tex]{\longrightarrow{\sf{\lambda = \cancel{\dfrac{2}{100}}}}}[/tex]

[tex]{\longrightarrow{\sf{\lambda = 0.02}}}[/tex]

[tex]\star{\underline{\boxed{\tt{\red{\lambda = 0.02 \: m}}}}}[/tex]

Hence, the wavelength is 0.02 m.

The formula of trinitrogen tetrabromide is N3Br4

Trinitrogen features three molecules of nitrogen, N3

Tetrabromide features four molecules of bromide = Br4

Thus, the formula of trinitrogen tetrabromide is N3Br4

Learn more about molecular formula here:

https://brainly.com/question/17405634

#SPJ1

Atom information–

Substituting values –

[tex]\qquad[/tex] [tex]\twoheadrightarrow\bf A=p^{+}+n^{0}[/tex]

[tex]\qquad[/tex] [tex]\twoheadrightarrow\bf A=26+29[/tex]

[tex]\qquad[/tex] [tex]\twoheadrightarrow\bf A=55[/tex]

____________________________________________

Answer:

it's entertaining. Energy though is the answer

Answer:

Fatty Acids

A lipid is an organic compound such as fat or oil. Organisms use lipids to store energy, but lipids have other important roles as well. Lipids consist of repeating units called fatty acids. Fatty acids are organic compounds that have the general formula CH3(CH2)nCOOH" role="presentation" style="display: inline-table; font-style: normal; font-weight: normal; line-height: normal; font-size: 17.6px; text-indent: 0px; text-align: left; text-transform: none; letter-spacing: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative;">CH3(CH2)nCOOHCH3(CH2)nCOOH, where n" role="presentation" style="display: inline-table; font-style: normal; font-weight: normal; line-height: normal; font-size: 17.6px; text-indent: 0px; text-align: left; text-transform: none; letter-spacing: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative;">nn usually ranges from 2 to 28 and is always an even number. There are two types of fatty acids: saturated fatty acids and unsaturated fatty acids.

Saturated Fatty Acids

In saturated fatty acids, carbon atoms are bonded to as many hydrogen atoms as possible. This causes the molecules to form straight chains, as shown in the figure below. The straight chains can be packed together very tightly, allowing them to store energy in a compact form. This explains why saturated fatty acids are solids at room temperature. Animals use saturated fatty acids to store energy.

Figure 14.2.1" role="presentation" style="display: inline-table; font-style: normal; font-weight: normal; line-height: normal; font-size: 16px; text-indent: 0px; text-align: left; text-transform: none; letter-spacing: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative;">14.2.114.2.1: Structures of saturated and unsaturated fatty acids.

Unsaturated Fatty Acids

In unsaturated fatty acids, some carbon atoms are not bonded to as many hydrogen atoms as possible due to the presence of one or more double bonds in the carbon chain. Instead, they are bonded to other groups of atoms. Wherever carbon binds with these other groups of atoms, it causes chains to bend (see figure above). The bent chains cannot be packed together very tightly, so unsaturated fatty acids are liquids at room temperature. Plants use unsaturated fatty acids to store energy.

Figure 14.2.2" role="presentation" style="display: inline-table; font-style: normal; font-weight: normal; line-height: normal; font-size: 16px; text-indent: 0px; text-align: left; text-transform: none; letter-spacing: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative;">14.2.214.2.2: Saturated fatty acids have only single bonds while monounsaturated fats have one double bond and polyunsaturated fats have more than one double bond.

Lipids and Diet

Unsaturated fat is generally considered to be healthier because it contains fewer calories than an equivalent amount of saturated fat. Additionally, high consumption of saturated fats is linked to an increased risk of cardiovascular disease. Some examples of foods with high concentrations of saturated fats include butter, cheese, lard, and some fatty meats. Foods with higher concentrations of unsaturated fats include nuts, avocado, and vegetable oils such as canola oil and olive oil.

Fructose is a simple carbohydrate sugar, while triglycerides are the lipids or the fats of the body. Thus, option C is accurate.

Triglycerides are lipids of the body that are formed of fatty acids and glycerols. It makes the body fat of the animals and of the plants. They are stored in cells for future use and provide energy when needed.

Fructose is a monomer that is the simplest carbohydrate sugar and is generally found in sugarcane, honey, watermelon, grapes, apples, etc.

Therefore, option C. fructose is sugar and triglyceride is fat is correct.

Learn more about triglycerides and fats here:

https://brainly.com/question/17576593

#SPJ2

Answer: Two possible ways to show the structure of CH4 are its electron dot diagram or structural formula. CH4 or methane's molecular formula is given as CH4. The structural formula is a graphical representation of a chemical compound.

Answer:

using electron dot diagrams or structional formula

[tex]\huge \bf༆ Answer ༄[/tex]

The trends showing increase in ionization energy on the periodic table ~

[ due to increase in effective nuclear charge ]

[ Due to decrease in number of shells ]

Ionization energy increases across a period from left to right in the periodic  table.

Ionization energy is the energy needed for the complete removal of valence electrons in its ground state from an isolated atom in its gaseous phase at a specified temperature to form an ion.

Ionization energy shows periodicity in that it shows a regular variation across a period and down a group in the periodic table.

Ionization energy increases across a period from left to right in the periodic  table.

Learn more about ionization energy at: https://brainly.com/question/1445179

Answer:

The process is to divide the molecules by Avogadro's number (6.02 x 10^23) to get the moles. And since it's specified at STP (standard temperature and pressure) we know that the molar volume would be 22.4L. So we can just multiply the moles by the molar volume in order to get the volume of H2S.

(2.18 x 10^24) / (6.02 x 10^23) = 3.62 moles (rounded)

Now just multiply the moles by the molar volume of STP, 22.4.

3.62 x 22.4 = 81 Liters (rounded) of H2S

The greenhouse gases are carbon dioxide, methane, and nitrous oxide.

The greenhouse effect has been defined as the entrapment of the sun's energy by the gases that result in the earth becoming warmer and a better place to live.

The gases present in the atmosphere that has been able to entrap the heat energy has been termed the greenhouse gases.

The greenhouse gases have been carbon dioxide, methane, and nitrous oxide.

For more information about  greenhouse gases, refer to the link:

https://brainly.com/question/11595872

Answer:

carbon dioxide, nitrous oxide, methane

Explanation:

Answer:

13.8 moles

Explanation:

You know that in a mole you have 6.022x10²³ something in this case of molecules. By knowing that by each mole you have 6.022x10²³ molecules, then you can establish the factor of conversion:

8.32x10²⁴molec of CO2 x 1 mol/6.022x10²³ molec of CO2

You divide 8.32x10²⁴/6.022x10²³ and you get 13.81 moles.

Answer:

Oxygen, heat, and fuel

Explanation:

Oxygen, heat, and fuel are frequently referred to as the "fire triangle." Add in the fourth element, the chemical reaction, and you actually have a fire "tetrahedron." The important thing to remember is: take any of these four things away, and you will not have a fire or the fire will be extinguished.

Cooking any food.

Burning of wood.

Digestion of food.

Acid-base reaction.

Answer:

C. Aluminum

Explanation:

Aluminum has 5.9858 ionization energy

Boron has 8.298 ionization energy

Silicon has 8.1517 ionization energy

Carbon has 11.2603 ionization energy

[tex] \huge \rm \ \blue \:{ \overbrace{ \underbrace{ \tt{ \color{red}{ \: \: \: \: \: \: answer \: \: \: \: \: \: }}}}}[/tex]

[tex] \huge \color{darkblue}P₂S_{5}[/tex]

Answer:

P2S5

Explanation:

Larger molecules take longer to move up the chromatography paper or TLC plate, whereas smaller molecules are more mobile. Likewise, the polarity of the molecules can affect how far the spots travel, depending on the type of solvent used.

[tex]\large\sf\red{♡♡}[/tex]

Answer:

The is less friction on an icy surface

Explanation:

This is because when u walk on plain ground there is steady friction on the surface but when u walk on an icy floor these is barely any friction which is why it's hard to walk on.

Answer:

There is less friction on an icy surface.

Hope that helps.

Explanation:

Answer: im pretty sure its D

Explanation:

Answer:

its called Toxoplasmosis.

Explanation:

Cats become infected by Toxoplasma gondii by ingesting the cysts of this parasite. Most often, this occurs when cats eat mice or rats infected with the parasite. However, they can also ingest it during grooming after coming in contact with infected soil or feces.

hope it helped ;)

Answer:

THE WORK YOU DO ON A MACHINE IS CALLED WORK INPUT

Answer:That all noble gases will have 8 valence electrons which makes a atom stable

Explanation:

Answer:

1. 39.997 g/mol

2. 6.022⋅1023 atoms of aluminium

3. 0.026 moles

4. 14 grams is the molar mass of nitrogen meaning that one mole of nitrogen atoms is 14 grams. One mole of any substance has 6.02*10^23 atoms/molecules of that subtance therefore there are 6.02*10^23 atoms of nitrogen in 14g of nitrogen

5. 78.5

Explanation:

Taking into account the Brønsted-Lowry acid-base theory, a base/conjugate acid pair is H₂O/H₃O⁺.

The Brønsted-Lowry acid-base theory (or the Brønsted-Lowry theory) identifies acids and bases based on whether the species accepts or donates protons or H⁺.

According to this theory, acids are proton donors while bases are proton acceptors. That is, an acid is a species that donates an H⁺ proton while a base is a chemical species that accepts an H⁺ proton from the acid.

So, reactions between acids and bases are H⁺ proton transfer reactions, causing the acid to form its conjugate base and the base to form its conjugated acid by exchanging a proton.

In other words, a conjugate base is an ion or molecule resulting from the acid that loses the proton, while a conjugate acid is an ion or molecule resulting from the base that gains the proton:

acid + base ⇄ conjugate base + conjugate acid

In this case, you know:

H₂PO₄ + H₂O → H₃O⁺ + HPO₄⁻

H₂PO₄ behaves like acid because donates an H⁺ proton while H₂O behaves like base because accepts an H⁺ proton from the acid.

So, H₃O⁺ is the conjugate acid of the H₂O and HPO₄⁻ is conjugate base of H₂PO₄.

In summary,  a base/conjugate acid pair is H₂O/H₃O⁺.

Learn more about the Brønsted-Lowry acid-base theory:

Answer:

Light from the window reflecting off the face of his watch <33

Answer:

Explanation:

Answer:

The answer is a,b, and c. This is for the USA tesprep videos

Explanation:

The characteristics that apply to the elements in the family are they are highly reactive, they are shiny, soft metals and the element form +1 ions when forming compounds. Thus option a, b and c is correct.  

Main group elements are defined as any of the element belonging to the s and p blocks of the periodic table.

They are most abundant element in universe and on earth.

This elements and their compound are one of the most important economical elements.

They are very good conductor of heat and electricity.

Thus, the characteristics that apply to the elements in the family are they are highly reactive, they are shiny, soft metals and the element form +1 ions when forming compounds. Thus option a, b and c is correct.  

To learn more about main group elements, refer to the link below:

https://brainly.com/question/5460947

#SPJ5

Answer:

As electro-negativity decreases from Florine to downwards in the group and only Florine is above Chlorine, so Florine should react with sodium chloride solution to produce chlorine.  

mark me brinilylist pls