Answer:
The amount of water
The amount of sugar and
The amount of yeast
Explanation:
A constant variable is that variable in an experiment which must be kept the same for all groups in order not to alter the results of the experiment.
In this question, the independent variable i.e. the variable being manipulated is the TYPE OF SUGAR USED while the dependent variable i.e. variable that responds to change is AMOUNT OF ENERGY. Three different types of sugar were used viz: maltose, glucose, and sucrose. To not alter the outcome of the experiment, the constants of this experiment i.e. variables that must be the same for all groups of the experiment, include the following:
- The amount of water
- The amount of sugar
- The amount of yeast used
Which two of the following changes of state involve solids?
Select two (2) answers
A. melting
B. boiling
C. freezing
D. evaporating
Answer:
Answer is A... Melting and freezing
Which of the following most likely happens when the volume of a gas increases?
-The number of collisions of gas particles remains same.
-The number of collisions of gas particles increases.
-The pressure of the gas remains same.
-The pressure of the gas decreases.
the pressure of the gas increases
Answer:
The number of collisions of gas particles increases.
Explanation:
Just took the test!!!
Help please I’ll give you brainless
Answer:
Step 9
Explanation:
The reason i selected step 9, is if you take a look at the picture hes setting up a funnel,With filter paper and if you take a look at number ''9'' questions it says set up a funnel, filter paper and filter flask which is shown in the picture on top that's how i got my answer
True or false one example of a chemical reaction is when H20 melts and changes state ice to liquid
Answer:
faulse
Explanation:
this is an example of a change in proporties
The most outer solid portion of
the planet Earth
Answer:
The lithosphere is the most outer solid portion of
he most outer solid portion ofthe planet Earth.
crust is the outermost layer of earth.
(1) The solubility of Salt AB2(S) IS 5mol/dm^3.
a. Obtain an expression for the solubility product of AB2(S),in terms of s.
b. Calculate the Ksp of AB2,given that solubility is 2.4x10^3mol/dm^3
Answer:
a. Ksp = 4s³
b. 5.53 × 10⁴ mol³/dm⁹
Explanation:
a. Obtain an expression for the solubility product of AB2(S),in terms of s.
AB₂ dissociates to give
AB₂ ⇄ A²⁺ + 2B⁻
Since 1 mole of AB₂ gives 1 mole of A and 2 moles of B, we have the mole ratio as
AB₂ ⇄ A²⁺ + 2B⁻
1 : 1 : 2
Since the solubility of AB₂ is s, then the solubility of A is s and that of B is 2s
So, we have
AB₂ ⇄ A²⁺ + 2B⁻
[s] [s] [2s]
So, the solubility product Ksp = [A²⁺][B⁻]²
= (s)(2s)²
= s(4s²)
= 4s³
b. Calculate the Ksp of AB₂, given that solubility is 2.4 × 10³ mol/dm³
Given that the solubility of AB is 2.4 × 10³ mol/dm³ and the solubility product Ksp = [A²⁺][B⁻]² = 4s³ where s = solubility of AB = 2.4 × 10³ mol/dm³
Substituting the value of s into the equation, we have
Ksp = 4s³
= 4(2.4 × 10³ mol/dm³)³
= 4(13.824 × 10³ mol³/dm⁹)
= 55.296 × 10³ mol³/dm⁹
= 5.5296 × 10⁴ mol³/dm⁹
≅ 5.53 × 10⁴ mol³/dm⁹
Ksp = 5.53 × 10⁴ mol³/dm⁹
what does the second law of thermodynamics say about entropy
Answer:
The entropy and the systems surrounding it tend to increase.
Answer: The entropy in a system and its surroundings tends to increase.
Explanation:
3.3.2 Quiz: Entropy (a p e x)
Which alkane is the isomer of butane called 2-methylpropane? A skeletal model of a 4-carbon chain has a straight line extending from the second and third carbons in the chain. A three-carbon chain has a straight line extending from the center carbon. A 5-carbon chain. A three-carbon chain has 2 lines extending from the same side of the center carbon.
Answer:
A three-carbon chain has a straight line extending from the center carbon.
Explanation:
Isomers are compounds having the same molecular formula but different structural formulas.
Butane and 2-methylpropane are constitutional isomers. Constitutional isomers differ in the way that the constituent atoms are connected to each other.
Butane is a straight chain compound while the compound 2-methylpropane consists of a three-carbon chain which has a straight line extending from the center carbon.
Answer:
it is b on edge 2021
Explanation:
Edward is gathering physical evidence at the scene of a crime. He finds a fingerprint pressed into the wax of a candle. What type of fingerprint is this?
The type of fingerprint found at the crime scene in this scenario is referred to as plastic.
What is Plastic fingerprint?This is the of fingerprint which is three dimensional and can be easily seen with the human eye.
Plastic fingerprint can be made by pressing the finger on substances such as wax, paint etc.
Read more about Fingerprint here https://brainly.com/question/11165604
#SPJ1
Answer:
the answer would be molded I believe.
choices are Latent,patent, inadmissible molded,trace.
NaBr
ions in
an aqueous solution.
A
forms
B
does not form
Answer:
A
Explanation:
i had to answer this question a few weeks ago
How many liters does 3 moles of Oxygen gas occupy at standard temperature and pressure
Answer: 3 moles of oxygen at STP will occupy a volume of 3×22. 4=67. 2 L.
During the process of condensation, water vapor
A. releases 334 J/g of heat energy
B. releases 2260 J/g of heat energy
C. gains 334 J/g of heat energy
D. gains 2260 J/g of heat energy
Answer:
A
Explanation:
it releases 4
334 J/g of heat energy
hope its correct
How does an indicator show the difference between an acid and an alkali?
Answer: There are various indicators like litmus paper, phenolphthalein, universal indicator etc. that changes its colour to show the difference between acid and alkali.
the rate of diffusion of gas having molecules mass 4 times that ouch4 is 50 cc.the rate of diffusion of mithane is??
Answer: The rate of diffusion of methane is 100 cc.
Explanation:
Graham's law states that the rate of diffusion of a gas is inversely proportional to the square root of the molar mass of the gas. The equation for this follows:
[tex]\text{Rate}=\frac{1}{\sqrt{M}}[/tex] .....(1)
where M is the molar mass of the gas
We are given:
[tex]Rate_{X}=50cc[/tex]
[tex]M_{X}=4\times M_{CH_4}[/tex]
Since the molar mass of methane = 16 g/mol
Using equation 1:
[tex]\frac{Rate_{CH_4}}{Rate_{X}}=\sqrt{\frac{M_X}{M_{CH_4}}}[/tex]
Putting values in above equation, we get:
[tex]\frac{Rate_{CH_4}}{50cc}=\sqrt{\frac{(4\times 16)}{16}}\\\\Rate_{CH_4}=50\times \sqrt{4}\\\\Rate_{CH_4}=50times 2=100cc[/tex]
Hence, the rate of diffusion of methane is 100 cc.
when magnesium reacts with chlorine, the chlorine atom gain electrons. what happens to chlorine in this reaction?
a. it is oxidized
b. it is synthesized
c. it is decomposed
d. it is reduced
Answer:
D
Explanation:
Reduction refers to gain in electrons. Hence it is D
Oxidation occurs when the element loses electrons. Hence A is wrong
In what method Copper sulphate solution change blue to colourless ??
Answer: When an iron nail immersed in the solution of copper sulphate than iron displaces copper from the solution of copper sulphate because iron is more reactive than copper. Therefore copper sulphate solution colour changes from blue to pale green.
Calculate the amount of money an accountant receives from a bank if he invests
$120 000 annum for 9 years at 10% per annum compound interest.
Answer:
The amount is $282953.72 using the given formula
Which substance is a basic oxide?
The oxide that gives a base in water is known as a basic oxide. An amphoteric solution is a substance that can chemically react as either acid or base. However, it is also possible for an oxide to be neither acidic nor basic, but is a neutral oxide.
Which of the following is not a reason why actual yield is less than theoretical yield?
A. presence of impure reactants
B. conservation of mass
C. competing side reactions
D. loss of product during purification
The option that isn't a reason why the actual yield is less than theoretical yield is B. conservation of mass.
It should be noted that the formula for the percent yield is given as:
= Actual yield / Theoretical Yield × 100
The actual yield is experimentally determined, and it's the quantity of a product that is gotten from a chemical reaction.The theoretical yield is the amount of product that can be obtained from a reaction when the reactants are changed to products.Actual yield can be less than theoretical yield due to the presence of impure reactants ,competing side reactions, and loss of product during purification.
In conclusion, the correct option is B.
Read related link on:
https://brainly.com/question/23854893
Please help me to answer this question.
i have to submit tomorrow.
Answer:
The law of conservation of mass states that mass in an isolated system is neither created nor destroyed by chemical reactions or physical transformations. According to the law of conservation of mass, the mass of the products in a chemical reaction must equal the mass of the reactants.
sucrose (sugar)crystals obtained from sugarcane and bet root are mixed together .with it be a pure substancesor a mixture ?give reasons
Answer:
It will be a pure substance (compound) because chemical composition of sugar crystals will be the same whether obtained from sugarcane or from beet root.
hope it's help you plz mark as brain list ...!!PLEASE HELP ASAP Put these events in order, from earliest to latest.
-the first fusion bomb is tested
-uranium atoms are split
-atomic bombs are dropped on Japan at the end of world war ll
-the first nuclear-powered submarine is put into action
-Enrico fermi creates the first known nuclear chain reaction
Answer:
1) Uranium atoms are split
2) Enrico Fermi creates the first known nuclear chain reaction
3) Atomic bombs are dropped on Japan at the end of WWll
4) The first fusion bomb is tested
5) The first nuclear-powered submarine is put into action
Which of the following molecules is an
alcohol? There is only one correct answer.
CH3COOH
CH3OH
CH2NH2
C2H5CI
CH3OH IS MOLECULES OF ALCOHOL
The density of aluminum is 2.7 grams per cm'.
How many grams does 12 cm of aluminum
weigh?
Answer:
32.4grams
Explanation:
Density of a substance can be calculated as follows:
Density = mass ÷ volume
According to this question, the density of aluminum is 2.7g/cm³ while its volume is 12 cm³. The mass of aluminum is therefore,
2.7 = m/12
m = 12 × 2.7
m = 32.4grams.
The mass of aluminum is 32.4grams
Which is a difference between Volume and Surface Area?
Answer:
Surface area is the sum of the areas of all the faces of the solid figure. ... Volume is the number of unit cubes that make up a solid figure. Volume is the amount of space inside of the solid figure.
Explanation:
what are the difference between ionic bond and covalent bond?
Which is stronger?
QUËSTIONS :- what are the difference between ionic bond and covalent bond?
IONIC BONDS :- THEY R BONDS WHICH R FORMED DUE TO THE COMPLETE TRANSFER OF ELECTRONS BETWEEN TWO ATOMS
COVALENT BONDS :- THEY R THE BONDS WHICH R FORMED DUE TO INCOMPLETE TRANSFER OF ELECTRONS BETWEEN TWO ATOMS
IONIC BONDS R MORE STRONGER.
Explanation:
Ionic bond is much stronger than covalent bond because it involves complete transfer of electrons because of which there is formation of cation and anion and there exist huge electrostatic forces of attraction. They also have high melting and boiling point which proves that the ionic bond is very strong.
Differences between ionic bond and covalent bond :
Ionic Bonds. Covalent Bonds
Polarity :High. Low
Shape : No definite shape. Definite shape
Melting Point :High Low
Boiling Point: High Low
Calculate the heat energy, in kJ, required to melt 1.0kg of ice at 0 degrees celcius.
Show all working out
Answer:
here is the answer. Feel free to ask for more chem help <3
how to determine the aspects for core and valence electrons in a periodic table. How comes in some elements like cobalt the 3d is on the valence side and arsenic the 3d is on the core side.
Answer:
See explanation
Explanation:
The electron configuration of an atom in an element determines the property of the atom. The core electrons are found inside the atom while the valence electrons are found on the outermost shell of the atom.
For cobalt, the outermost shell electron configuration is; [Ar] 3d7 4s2. The 3d7 and 4s2 are found in the valence shell of cobalt.
For arsenic, the electronic configuration is [Ar] 3d¹⁰ 4s² 4p³. The valence electrons are 4s2, 4p3. The 3d electrons are found inside the arsenic atom.
tell me the name please
Answer:
molecules
Explanation:
they are molecule
What determines the strength of a dipole dipole force?
Answer:
The more polar the molecules, the stronger the force. The more hydrogen in the molecule, the stronger the force.
Explanation:
I hope this helps and please ask if you need further help!