A pyroclastic flow is a volcanic ash and gas. the correct answer is: B
A pyroclastic flow can move at speeds that exceed 100 m/sec, is a mixture of magma, volcanic ash and gas, and air, forms when airborne pyroclasts of various sizes begin to rain down upon the ground, and can reach temperatures of 350°C.
However, it is not true that it is rarely responsible for volcano-related deaths.
This statement is incorrect.
What is a pyroclastic flow?A pyroclastic flow is a volcanic event that produces a dense, dangerous cloud of ash, lava blocks, and gas that flows swiftly down the slope of a volcano.
Pyroclastic flows are most commonly associated with volcanic eruptions and can cause a lot of damage and death.
As previously stated, a pyroclastic flow is a mixture of magma, volcanic ash and gas, and air, and it can reach temperatures of 350°C.
The statements which are true regarding the pyroclastic flow are:
It can move at speeds that exceed 100 m/secIt is a mixture of magma, volcanic ash and gas, and air forms when airborne pyroclasts of various sizes begin to rain down upon the ground and can reach temperatures of 350°C. Therefore, the correct answer is B.
It can move at speeds that exceed 100 m/sec, is a mixture of magma, volcanic ash and gas, and air, forms when airborne pyroclasts of various sizes begin to rain down upon the ground, and can reach temperatures of 350°C.
TO KNOW ABOUT pyroclastic flow :
https://brainly.com/question/31460982#
#SPJ11
According to the scientific view, how many years ago did life on earth begin?a. 3.5 billion years ago b. 3.5 billion years ago c. 3.5 million years ago d. 3.5 million years ago e. 350,000 years ago
figure 1 shows the rock layers and fossils in a particular outcropping. figure 2 shows the rock layers and fossils in a second out cropping Explajn the similarities and differences you see in the examples. complete the sentences by choosing the correct answer from each box.
Answer:
the questions are blurred?
Explanation:
Answer: 1. D 2. J 3. Fossils 4. Similar
Explanation: they have the same fossils so they wee in the same place
What is a common rock that can be dissolved by water and weak acids? A. quartzite. B. quartz-rich sandstone. C. limestone. D. all of thes
Answer: C. Limestone
Explanation:
Maine, Nevada, and North Dakota do not have large populations. What are some reasons for such small populations
Answer:
Explanation:
I have been to Maine several times. There are two issues about living there.They have hard winters, most of the time. Do not live there if you cannot deal with a long, hard winter. Its good if you can stay inside and write, like Stephen King.
another thing is job diversity because they rely on Lumber, fishing and other natural resources
Nuclear reactions in main sequence stars take place ___________________________, where the gas is hot and dense.
Nuclear reactions in main sequence stars take place in their cores, where the gas is hot and dense.
What is a nuclear reaction?A nuclear reaction is a process in which atomic nuclei are modified, which changes the chemical properties of an atom. A nuclear reaction can result in the release or absorption of energy. The transmutation of nuclei, the creation of nuclei, or the splitting of nuclei are all examples of nuclear reactions. Nuclear reactions can be brought about by a variety of means, including natural radioactive decay, nuclear fission, and nuclear fusion.Nuclear reactions in main sequence stars take place in their cores, where the gas is hot and dense. In their core, high temperatures and pressures produce nuclear fusion. The process of nuclear fusion involves the conversion of hydrogen into helium, which releases a large amount of energy. This energy is responsible for the star's radiance and heat.
Learn more about nuclear reaction here: https://brainly.com/question/1420545
#SPJ11
Volcanic activity created the _____ that is important to the economy of the village of Vestmannaeyjar on the island of Heimaey, near Iceland. fishing port.
Volcanic activity created the fishing port that is important to the economy of the village of Vestmannaeyjar on the island of Heimaey, near Iceland. This statement is factual and relevant to the given question.
Volcanic activity refers to the processes and phenomena involved in the eruption of magma, ash, gas, and other volcanic materials from the earth's surface. The volcanic activity is often accompanied by a range of environmental impacts such as air pollution, climate change, landslides, and the formation of new landforms, among others.
In the case of the village of Vestmannaeyjar on the island of Heimaey, near Iceland, volcanic activity played a significant role in creating the fishing port that is important to the economy of the village. The eruption of Eldfell in 1973, which lasted for about five months, resulted in the formation of a new landmass and created a natural harbor that became the new fishing port of the village.
The fishing industry is the backbone of the economy of Vestmannaeyjar, with its major focus being on the harvesting of fish such as cod, haddock, and mackerel. Therefore, the volcanic activity that created the fishing port played a significant role in shaping the economy and social life of the village.
To know more about volcanic activities refer here :https://brainly.com/question/10564401#
#SPJ11
what is the world’s most frequented artificial waterway?
Answer:
The Kiel Canal
Explanation:
Coal is formed from the remains of plants covered by rocks and soil for millions of years and can be burned to produce energy. Soil and layers of rock are removed to
uncover coal using diggers and bulldozers during a process called mining.
How does coal mining affect the environment?
O Coal mining cleans the rivers in the area.
O Coal mining improves the health of the living things near the mine.
O Coal mining increases the amount of water in the rivers in the area.
Coal ming increases the amount of soil washed away when it rains.
Answer: Coal mining increases the amount of soil washed away when it rains.
Explanation: Coal mining can have significant negative impacts on the environment. One of the primary impacts is the disturbance of the land and removal of soil and layers of rock to access the coal. This can lead to erosion and soil degradation, and can increase the amount of soil washed away during rain events. Coal mining can also lead to water pollution as contaminants from the mining process can leach into nearby waterways, impacting aquatic ecosystems and making the water unsafe for human consumption. In addition, coal mining can contribute to air pollution through the release of particulate matter and greenhouse gases during the mining and burning of coal. Overall, coal mining can have wide-ranging and long-lasting environmental impacts.
desertification, the great green wall, and sustainable water harvesting are all human activities that have impacted the vegetation over time in which physical area?
The physical area that has been impacted by desertification, the Great Green Wall, and sustainable water harvesting due to human activities is the Sahel region.
Desertification is the process by which once-productive land transforms into a desert-like, lifeless region. Overgrazing, deforestation, and soil erosion, as well as climate change and drought, are the main causes of desertification.
The Great Green WallThe Great Green Wall is a 7,775-kilometer-long greenbelt that spans 11 countries in Africa, from Senegal in the west to Djibouti in the east. The project aims to tackle desertification and its negative effects on the people and environment of the Sahel region. The Great Green Wall is intended to be a barrier to prevent the spread of the Sahara Desert southward.
Farmers in the Sahel region are supported to plant trees, harvest water, and develop sustainable farming methods. The people in the region are dependent on rainwater, which is becoming more unpredictable as a result of climate change.
For such more questions on desertification:
brainly.com/question/9179918
#SPJ11
Detrital sedimentary rocks are classified mainly on the basis of... 1) Colors of the cementing minerals
2) Grain sizes of the detrital particles
3) Compositions of soluble minerals
4) Degree of compaction and lithification
Detrital sedimentary rocks are classified mainly on the basis of the grain sizes of the detrital particles. Therefore, the correct answer is the second option.
Detrital sedimentary rocks are rocks that form from the weathering and erosion of pre-existing rocks. This process is known as mechanical weathering. Weathering refers to the breakdown of rock into small particles while erosion involves the transportation of weathered rock by various agents such as water, wind, and ice.
When sedimentary rocks are formed from the transported sediment that has accumulated over time and are cemented together, they are referred to as detrital sedimentary rocks. Detrital sedimentary rocks are characterized by the size and shape of the sediment that they are made up of.
Learn more about Detrital sedimentary rocks at https://brainly.com/question/30648046
#SPJ11
Part A - Cloud Types describes. There are three basic types of cloud: cirrus, cumulus, and stratus. Match each of the following items to the type of cloud Drag the appropriate items into their respective bins. View Available Hint(s) Reset Help The cloud family found at the highest altitudes Are larger and have no distinct individual cloud units High, white, and thin Sheets or layers covering most or all of the sky Have a cauliflower appearance Have a feathery appearance Comprised of globular, individual cloud masses Cirrus Cumulus Stratus Submit Part B - Raindrop formation The maximum radius for cloud droplets is about 0.05 millimeters. However, typical raindrops have volumes thousands of times greater. Let's examine how these tiny cloud droplets turn into raindrops. Forming raindrops occurs within cumulus (cumulonimbus) and stratus (nimbostratus) clouds via the Bergeron process or the collision-coalescence process. The Bergeron process is active at subfreezing temperatures. • Ice crystals grow from supercooled water droplets-tiny water droplets that are liquid below the freezing point of water. • If a cloud is saturated with water, it is supersaturated with ice. Therefore, as ice crystals form, water droplets evaporate to replenish the water vapor used in forming ice crystals. • These ice crystals can grow large enough to fall to the ground, melting to form raindrops as they reach higher temperatures during decent. For the collision-coalescence process: • Larger water droplets collide and join with other water droplets, eventually forming raindrops that are large and heavy enough to fall to the ground. When these water droplets have more of an opportunity to collide with other water droplets (e.g., in taller clouds or because of updrafts), they are better able to form raindrops. • Additionally, because the droplets are not all exactly the same size, they will move at different rates, increasing the likelihood of collisions. • This rainfall can be measured using reflectivity. A higher rate of rainfall reflects more light than lower rainfall rate, so it is possible to determine the rate of rainfall using reflectivity. Select all that apply. View Available Hint(s) Rain forms via the collision-coalescence process when larger water droplets combine with other water droplets while passing through the cloud. Supercooled water in clouds enables the Bergeron process, where raindrops start as ice crystals. Thin sheets of clouds are conducive to raindrop formation via the collision-coalescence process. For temperatures below 0°C, air that is saturated with water is not saturated with ice. Submit Now, you will use rainfall rates calculated from reflectivities to determine total rainfall. Part C - Calculating rainfall amounts People look at weather radar maps regularly to visualize current and recent weather patterns. These weather radar maps provides information on the intensity of precipitation in addition to the total amount of precipitation that falls over a given time period. The heavier the rainfall, the more reflective it is. This reflectivity can be used to calculate the rate of rainfall. The table provided below displays data that illustrates the relationship between radar reflectivity values and rainfall rates. Use this information to calculate the amount of rainfall for the radar values and rainfall durations provided. The calculations you will perform involve only simple algebra, like multiplication and addition. Drag the appropriate labels to their respective targets. Note that not all labels will be used. View Available Hint(s) Reset Help 12 inches 16 inches 0.6 inches 13.75 inches 3.25 inches 4.5 inches A reflectivity value of 47 dBZ for 2 hours. Conversion of radar reflectivity to rainfall rate Radar Rainfall Ratel Reflectivity (dBZ) (inches/hr) 65 16+ 60 8.0 55 4.0 52 2.5 A reflectivity value of 30 dBZ for 6 hours. A reflectivity value of 55 dBZ for 4 hours, A reflectivity value of 52 dBZ for 5 y hours. 47 1.3 A reflectivity value of 41 dBZ for 24 hours. 41 0.5 36 0.3 30 0.1 20 trace
Answer:
c
Explanation:
Clouds are categorized into three basic types: cirrus, cumulus, and stratus. Cirrus clouds are found at the highest altitudes and are thin, white, and feathery.
What are the types of Clouds ?Cumulus clouds have a cauliflower appearance and are comprised of individual globular cloud masses. Stratus clouds are characterized by sheets or layers that cover most or all of the sky.
Raindrops are formed through two main processes: the Bergeron process and the collision-coalescence process. The Bergeron process occurs at subfreezing temperatures, where ice crystals grow from supercooled water droplets.
As ice crystals form, water droplets evaporate to replenish the water vapor used in forming ice crystals. These ice crystals can grow large enough to fall to the ground, melting to form raindrops as they reach higher temperatures during descent.
The collision-coalescence process occurs when larger water droplets collide and join with other water droplets, eventually forming raindrops that are large and heavy enough to fall to the ground. Rainfall rates can be measured using reflectivity, where a higher rate of rainfall reflects more light than lower rainfall rates.
To calculate the amount of rainfall for a given reflectivity value and rainfall duration, we can use the table that displays the relationship between radar reflectivity values and rainfall rates.
By converting the reflectivity values to rainfall rates using the table and multiplying by the duration of rainfall, we can determine the total amount of rainfall. These calculations involve simple algebraic operations, such as multiplication and addition.
Regular monitoring of weather radar maps can provide information on the intensity of precipitation and the total amount of rainfall over a given time period.
Learn more about Clouds here
https://brainly.com/question/29976956
#SPJ2
Following a supernova explosion, if a star’s leftover core is between 1.4 and 3 times the mass of the Sun, neutron degeneracy pressure will balance its self-gravity, and it will be a neutron star—a ball of hot neutrons glowing with the release of thermal radiation, slowly fading as it cools. Above 3 solar masses, the star’s self-gravity is stronger than neutron degeneracy pressure, and the star collapses instead into a singularity (a single point) called a black hole.
Recall that conservation of angular momentum causes collapsing objects to rotate faster. With that in mind, sort the following objects in order of the rotational speed you would expect them to have when they first form, from slowest to fastest.
Items (4 items)
(Drag and drop into the appropriate area)
main-sequence star
black hole
white dwarf
neutron star
Items in order
slowest
1
2
3
4
The order of rotational speed from slowest to fastest that you would expect these objects to have when they first form is Main-Sequence Star, White Dwarf, Neutron Star, and Black Hole.
Following a supernova explosion, the leftover core of a star will become a Main-Sequence Star if it is between 1.4 and 3 times the mass of the Sun. If the star is above 3 solar masses, the star's self-gravity is stronger than neutron degeneracy pressure, and the star collapses instead into a singularity (a single point) called a Black Hole. Conservation of angular momentum causes collapsing objects to rotate faster.
Therefore, the order of rotational speed from slowest to fastest is Main-sequence Star ⇒ White Dwarf ⇒ Neutron Star ⇒ Black Hole
Learn more about supernova explosions at https://brainly.com/question/28375022
#SPJ11
which of the following are not considered sediments?group of answer choicesfragments of shellsfragments of rockcemented grainsprecipitated crystals
(C) Precipitated crystals are not considered sediments as they are not formed by the accumulation of fragments of shells or rocks or cemented grains.
Sediments are typically formed by the accumulation and deposition of materials such as fragments of shells, rocks, or cemented grains, usually in bodies of water such as oceans or lakes. Precipitated crystals, on the other hand, are formed through the chemical process of precipitation, which occurs when a dissolved substance in a liquid comes out of solution and solidifies. Precipitated crystals are typically formed by the cooling or evaporation of a liquid or by chemical reactions, rather than by the physical accumulation and deposition of material. As a result, they are not considered sediments, which are formed through the physical process of deposition.
Therefore, all options listed in the question are considered sediments, EXCEPT (C) precipitated crystals.
"
Complete question
which of the following are not considered sediments?group of answer choices
A: fragments of shells
B: fragments of rock
C: precipitated crystals
D: cemented grains
"
You can learn more about sediments at
https://brainly.com/question/15009781
#SPJ11
What a Geologist Sees Explosive volcanic eruptions produce pyroclastic debris that is deposited in layers. This photo shows pyroclastic debris layers on the Kilauea Volcano of Hawaii. Note that there are distinct layers, and that the clast sizes are not all the same. The boundaries between different layers are highlighted. Drag the labels to the appropriate target. A fine-grained deposits The Products of Volcanic Eruptions В B. blocky deposits oldest D) youngest ~20 cm What a Geologist Sees
A geologist studying the Kilauea Volcano of Hawaii can observe the products of explosive volcanic eruptions in the form of pyroclastic debris that is deposited in layers. The debris deposits are made up of a variety of different clasts, ranging from fine-grained to blocky in size.
These layers can be easily identified due to their distinct boundaries and can be distinguished by the size of the clasts within them. The oldest deposits typically consist of smaller, fine-grained clasts, while the youngest deposits contain larger, blocky clasts.
The layers of pyroclastic deposits offer valuable insight into the history and evolution of the volcano and its surrounding environment. For example, the thickness of each layer can provide clues as to the frequency of eruptions and the intensity of each eruption. In addition, the composition of the clasts can tell geologists what kind of material the volcano was composed of and how it changed over time.
Geologists can also use the size, shape, and orientation of the clasts within each layer to understand the dynamics of the eruption. The orientation and size of the clasts can help geologists to determine the direction of the eruption and the force of the eruption. This can also help them to reconstruct the pathway of the volcanic plume and the deposition pattern of the pyroclastic material.
By studying the pyroclastic debris deposits, geologists are able to gain a greater understanding of the Kilauea Volcano and its associated processes. Through detailed analysis of these layers, geologists can begin to paint a picture of the past, and gain insight into the dynamics of the eruption that formed them.
For more about pyroclastic debris:
https://brainly.com/question/27995449
#SPJ11
From the following, select the ways in which Titan resembles early Earth. (Choose all that apply.) a. It has a thick atmosphere. b. Its atmosphere is mostly nitrogen. c.…From the following, select the ways in which Titan resembles early Earth. (Choose all that apply.)a. It has a thick atmosphere.b. Its atmosphere is mostly nitrogen.c. It has liquid water on the surface.d. It has terrain similar to Earth's.e. It is rich in organic compounds.
From the given options, the ways in which Titan resembles early Earth are: a. It has a thick atmosphere. b. Its atmosphere is mostly nitrogen. d. It has terrain similar to Earth's. e. It is rich in organic compounds. Therefore, options a, b, d, and e are the correct ways in which Titan resembles early Earth.
Titan's thick atmosphere: Like Earth, Titan also has a thick atmosphere. The atmosphere of Titan is about 1.5 times denser than the Earth's atmosphere, and it extends up to 600 kilometers above the surface. Nitrogen is the dominant gas in the atmosphere of Titan: Titan's atmosphere is mostly composed of nitrogen gas, similar to early Earth.
The ratio of nitrogen and methane in the atmosphere of Titan is about four to one, and the remaining amount consists of trace gases like argon, hydrogen, and helium. Terrain similar to Earth's: Titan's surface is characterized by a diverse range of features like dunes, lakes, seas, and mountains, which are similar to those found on Earth.
The equatorial regions of Titan have a dune field that is similar to those found in the Namibian desert. The dune fields in the higher latitudes resemble polar ice caps on Earth. Rich in organic compounds:
The organic molecules on Titan are formed by a chemical process known as photochemical reactions, which involve ultraviolet radiation from the sun.
For such more question on thick atmosphere:
https://brainly.com/question/18188505
#SPJ11
Six police officers A, B, C, P, Q and R were saluting on Independence Day in such a way that was second to the left of Q but immediate right of A. There was one police officer between B and P. B and S Were not at any end of the row. P and Q were neighbors. Who was at the extreme left?
The extreme left in the row of six police officers saluting on Independence Day is Officer A.
Officer B is alternate to the left wing of Officer Q and incontinently to the right of Officer A. Officer P and Officer Q are neighbors, with Officer P being one police officer to the left wing of Officer B. Officer R is on the extreme right of the row.
The relationship between the police officers can also be imaged with the following example A- B- Q- P- R In this example, Officer A is at the extreme left wing, Officer B is alternate to the left wing of Officer Q, and Officer P and Officer Q are neighbors. Officer R is at the extreme right.
To know more about police officers visit:
https://brainly.com/question/28535628
#SPJ4
Different types of lava have different viscosities, depending on their composition or temperature, or both. Label the types of tava flows based on their relative viscosities. Nichest Viscosity Intermediate viscosity lava lowest Viscosity lava SUBMIT ANSWER 1 OF 15 QUESTIONS COMPLETED < 02/15 > 71 &tv A What a Geologist Sees The image shows Mount St. Helens two years after its 1980 eruption. Given the shape of the volcano and presence of a lava dome (source of the steam), what is the most likely composition of the associated magma? SUBMIT ANSWER 1 OF 15 QUESTIONS COMPLETED < 08/15 > Choose one: O A. felsic to intermediate O B. no relationship between these features and magma composition O C. mafic O D. ultramafic
The most likely composition of the associated magma is A. felsic to intermediate.
What is magma?Magma is molten rock that is found beneath the Earth's surface. It is composed of several different minerals and materials and is formed when the hot rock found within the Earth's mantle rises and melts. Magma is a liquid mass of molten rock that is made up of intense heat and pressure. Magma is found in the lower parts of the Earth's crust, and it can sometimes reach the surface of the Earth, resulting in volcanic eruptions. The temperature of magma can range from 700°C to 1300°C.
Mount St. Helens experienced a Plinian eruption in 1980, which is typical of magmas with a felsic to intermediate composition. The presence of a lava dome is a sign that the magma is still relatively hot and therefore still has some gas, which is also consistent with a felsic to intermediate composition. Mafic, ultramafic, and other magma compositions do not typically produce Plinian eruptions.
To learn more about magma
https://brainly.com/question/23661578
#SPJ1
what are the different sizes and shapes of galaxies?
elliptical, spiral and irregular
Astronomers classify galaxies into three major categories: such as the answers above ⬆️
these galaxies span a wide range of sizes, from the dwarf galaxies containing as few as 100 million stars to giant galaxies with more than a trillion stars- or so they say of course.
Rank these volcanic hazards according to their travel distance. 1 (Furthest from the source) [Choose ] Tephra Low viscosity lava flow High viscosity lava flow 2 3 (Closest to the source) [ Choose ]
The following are the volcanic hazards ranked according to their travel distance:
1: (Furthest from the source): Tephra2: High-viscosity lava flow3: (Closest to the source): Low-viscosity lava flowThe volcanic hazards have been ranked according to their travel distance below:1 (Furthest from the source): Tephra
Tephra is the solidified ash and other debris that is erupted during volcanic eruptions. It can travel very long distances and fall from the sky like rain, often blanketing areas far away from the volcano.
2: High-viscosity lava flow
High-viscosity lava flows are slow-moving, thick, and sticky. They can travel long distances from the volcano, but at a much slower rate than low-viscosity lava flows. As a result, they pose a greater threat to surrounding areas, causing damage to anything in their path.
3 (Closest to the source): Low-viscosity lava flow
Low-viscosity lava flows are fast-moving, runny, and can travel long distances from the source. They spread out in thin sheets and can flow quickly, but they also cool quickly, so they don't usually cause as much damage as high-viscosity lava flows.
Learn more about volcanic hazards at https://brainly.com/question/1447821
#SPJ11
Interstellar dust is effective at blocking visible light because...A) the dust is so denseB) dust grains are so fewC) dust grains are so smallD) dust grain are so large
Interstellar dust is effective at blocking visible light because dust grains are so small. Therefore the correct option is option C.
Interstellar dust is a constituent of the interstellar medium in the galaxy. It's a form of matter that exists in the space between the stars. These are the small fragments of matter that have been formed from the dust ejected from stars and then mixed with gas.
This dust, often known as cosmic dust, has a long history of causing great curiosity among scientists as it includes the building blocks of our own world, making it an essential component in the universe.
The interstellar dust consists of a wide range of materials, including heavy elements, minerals, silicates, carbon, and ice. In general, this dust is extremely fine-grained, measuring just a few hundred nanometers in size. Therefore, it is effective at blocking visible light.
For such more question on Interstellar dust:
https://brainly.com/question/11547265
#SPJ11
An example of a calcium carbonate deposit in the lithosphere is...
answer choices
Gneiss
Limestone
Shale
Granite
The example of a calcium carbonate deposit in the lithosphere is limestone. Limestone is a sedimentary rock composed mostly of calcium carbonate ([tex]CaCO_{3}[/tex]), which is deposited by precipitation or accumulation in the form of layers (strata).
Limestone is a sedimentary rock that forms from the precipitation of calcium carbonate from the water. It is one of the most abundant rocks in the Earth's crust and is a significant part of the lithosphere. Limestone can be found all over the world and is commonly used in construction, cement, and agriculture.Gneiss, shale, and granite are all examples of metamorphic rocks that form from existing rocks under high temperature and pressure. They do not contain significant amounts of calcium carbonate deposits. Therefore, the correct answer is limestone.
For such more questions on limestone:
brainly.com/question/14529174
#SPJ11
a hurricane is defined as a large area of sustained winds greater than 119 this is the wind speed at which
A hurricane is defined as a large area of sustained winds greater than 119; this is the wind speed at which a tropical storm becomes a hurricane.
A hurricane is a tropical cyclone with strong, rotating winds. A tropical cyclone is a broad, rotating low-pressure system that produces thunderstorms and potentially damaging wind and rain.
Hurricanes are classified into five categories based on their sustained winds. The Saffir-Simpson Hurricane Wind Scale classifies hurricanes as follows:
Category 1: sustained winds of 74-95 mphCategory 2: sustained winds of 96-110 mphCategory 3: sustained winds of 111-129 mphCategory 4: sustained winds of 130-156 mphCategory 5: sustained winds of 157 mph or higherHurricanes are classified based on their sustained wind speed. A tropical storm becomes a hurricane when its sustained wind speed exceeds 74 mph, and it becomes a major hurricane when its sustained wind speed exceeds 111 mph.
Learn more about Saffir-Simpson Hurricane Wind Scale at https://brainly.com/question/31044233
#SPJ11
What pressure area is this?
Answer:
High pressure
Explanation:
It is a high pressure area because it's area temperature is hot.
The density of each layer is affected by the ______________ of the material and the amount of _____________ it is under
The density of each layer is affected by the composition of the material and the amount of pressure it is under.
The composition of the material, similar as the minerals and rudiments present in it, will have an effect on its viscosity. Pressure is also a factor, as some accoutrements will come more thick when subordinated to lesser pressure.
For example the Earth's crust is made up of several layers of different consistence and is affected by the pressure from the overlying layers. The pressure increases the deeper one goes, and so the viscosity increases as well.
To know more about Earth's crust visit:
https://brainly.com/question/6285356
#SPJ4
What was the government group that was sent to protect the Indians in 1968
In 1968, the U.S. government created a special unit known as the Indian Police Power and Responsibility Task Force (IPPR) to provide law enforcement and security services to American Indian communities.
The IPPR was established in response to the growing tensions between Native American tribes and the federal government, which had been escalating for several decades.
The IPPR was made up of specially trained law enforcement officers who were responsible for protecting the civil rights of Native Americans and enforcing federal laws on reservations. The task force was also tasked with investigating crimes committed against Native Americans and ensuring that those responsible were brought to justice.
The creation of the IPPR was an important step in improving relations between the federal government and Native American communities, although it was not without controversy. Some critics argued that the task force was an attempt to increase federal control over Native American lands, while others praised its efforts to protect the rights and welfare of indigenous people.
To learn more about American Indians
https://brainly.com/question/1434104
#SPJ4
suppose bad weather and pollution dramatically reduce the supply of crawfish in Louisiana next year. this would also lead to _____ the marginal utility of crawfish consumption.
Suppose bad weather and pollution dramatically reduce the supply of crawfish in Louisiana next year. This would also lead to a rise in the marginal utility of crawfish consumption.
What is Marginal Utility?
Marginal utility (MU) is the additional utility that a consumer derives from the consumption of a good or service. It's the increase in total utility that results from consuming one more unit of a good or service. Marginal utility decreases as the quantity consumed rises, holding all other variables constant.
How does the supply of crawfish affect the marginal utility of crawfish consumption?
The supply of crawfish will impact the marginal utility of crawfish consumption. As the supply of crawfish decreases, the marginal utility of consumption will increase since it will become more scarce and therefore more valuable. This will cause consumers to derive greater utility from each unit of consumption, and they may be willing to pay more for it.
As a result, consumers may purchase fewer units of crawfish due to higher prices, further decreasing the quantity demanded.What happens to the marginal utility of consumption if there is a decrease in the supply of crawfish?The decrease in supply of crawfish will lead to a rise in the marginal utility of crawfish consumption.
This implies that the reduced supply of crawfish will increase its scarcity, making it more valuable, and therefore more utility is derived from each unit of consumption. Since the marginal utility of crawfish consumption increases, consumers may be willing to pay more for it, resulting in an increase in the price of crawfish.
To know more about Marginal utility (MU) refer here:https://brainly.com/question/28962090#
#SPJ11
1. this fossil will have a space remaining in a rock where the original fossil was____ (MOLD) 2. this fossil is replaced with minerals such as silica and calcite is called____ (CAST) 3. fossils such as footprints, coprolites, and burrows is called____
A mold is a natural cavity in a rock or sediment that is formed when the original fossil is dissolved by underground water. The mold preserves the shape of the original organism, and it may contain other important information, such as the size of the organism, its texture, and its orientation. Molds are useful to paleontologists because they provide a detailed record of the organism's anatomy, and they can be used to make casts or replicas of the original fossil.
A cast is a replica of a fossil that is made by filling a mold with minerals such as silica or calcite. The minerals harden and form a solid replica of the original organism. Casts are useful to paleontologists because they provide a 3D model of the fossil, and they can be studied in detail without damaging the original fossil.
Trace fossils are preserved remains of the activity that is not directly related to the organism's body. Examples of trace fossils include footprints, coprolites (fossilized feces), burrows, and nests. Trace fossils are useful to paleontologists because they provide information about the organism's behavior, habitat, and environment. They can also help to identify the presence of extinct animals that may not have left a fossilized body behind.
Learn more about fossils at https://brainly.com/question/28122522
#SPJ11
what are the two dominant climate zones in the south asia region?a) winter & summerb) equatorial climate and tropical savannahc) rain wet and spring
The two dominant climate zones in the South Asian region are b)equatorial climate and tropical savannah.
The equatorial climate zone is located along the coasts of southern India and Sri Lanka, while the tropical savannah climate zone is located in the interior of the region. Both of these climate zones have distinct characteristics and affect the climate patterns of the region. The equatorial climate zone is characterized by high temperatures and high humidity throughout the year. It experiences heavy rainfall throughout the year, with no clear dry season. This climate zone is also prone to tropical cyclones and hurricanes, which can cause severe damage to the coastal regions.
The equatorial climate zone is important for the production of crops such as rice, tea, and rubber. The tropical savannah climate zone is characterized by distinct wet and dry seasons. It experiences high temperatures and low humidity during the dry season and high humidity and heavy rainfall during the wet season. This climate zone is important for the production of crops such as wheat, maize, and cotton. Overall, the South Asian region is characterized by a diverse range of climates due to its vast size and varied topography.
The region is influenced by monsoon winds and is prone to natural disasters such as floods, droughts, and cyclones. It is important for the countries in the region to understand and adapt to the unique climate patterns in order to ensure sustainable development and economic growth. Therefore the correct option is b)
Know more about climate zones here:
https://brainly.com/question/21119175
#SPJ11
according to the multiple nuclei model, an airport is likely to attract nearbyhotels and warehousesretail and wholesale shopsresidences and highwaysuniversities and colleges
According to the multiple nuclei model, an airport is likely to attract nearby residences and highways.
Multiple Nuclei Model, created by C.D. Harris and E.L. Ullman, is a geographic theory that acknowledges the presence of numerous nodes in a city, each having its own unique features.
Each node serves as the nucleus of the city's growth and development. Multiple nuclei model According to the multiple nuclei model, an airport is likely to attract nearby residences and highways, as it is a significant component of the city's economic development.
Since the airport is critical for business growth and creates job opportunities, people prefer to settle near the airport. This leads to the construction of new residential areas and highways near the airport, which facilitates travel to and from the airport.
For such more question on nuclei model:
https://brainly.com/question/30870804
#SPJ11
true or false lithofication is the process in which two plates move towards each other and the denser one slides below the other.
The statement "lithification is the process in which two plates move towards each other and the denser one slides below the other" is False because lithification refers to the process in which sediment is compacted and cemented together to form sedimentary rock.
What is lithification?Lithification is the process by which sedimentary rocks are formed. It is a transformation process that involves the compaction and cementation of sediment to produce solid rock from loose sediment. The process of lithification results in the creation of sedimentary rocks from sediments such as clay, silt, sand, and gravel.
How does lithification occur?Lithification occurs in three stages:
Compaction of Sediments - This occurs when the weight of overlying sediment squeezes the water out of the sediments beneath it. As a result, the sediment becomes denser, and the grains are packed closer together.
Cementation of Sediments - Cementation occurs when mineral crystals are deposited in the small spaces between the sediment grains, gluing them together to create solid rock.
Sedimentary Rocks - Sedimentary rocks are formed when the compacted and cemented sediment becomes hard and forms rock.
Thus, the statement, "Lithification is the process in which two plates move towards each other and the denser one slides below the other," is false.
Learn more about Lithification here: https://brainly.com/question/1446935
#SPJ11