The final pressure of the gas in the container is 4 atm
From the question given above, the following data were obtained:
Initial volume (V₁) = 4 L
Initial temperature (T₁) = 300 K
Initial pressure (P₁) = 1 atm
Final temperature (T₂) = 600 K
Final volume (V₂) = 2 L
Final pressure (P₂) =?Using the combine gas equation, we can obtain the final pressure of the gas as illustrated below:[tex]\frac{P_{1} V_{1} }{T_{1}} = \frac{P_{2} V_{2}}{T_{2}}\\\\\frac{1 * 4}{300} = \frac{P_{2} * 2}{600} \\\\[/tex]
Cross multiply
300 × 2 × P₂ = 4 × 600
600 × P₂ = 2400
Divide both side by 600
[tex]P_{2} = \frac{2400}{600} \\\\[/tex]
P₂ = 4 atmTherefore, the final pressure of gas is 4 atm.
Learn more: https://brainly.com/question/23558057
Nitrogen will ____ valence electrons when forming an ionic bond.
Type the correct answer in each box to complete the table. Use numerals instead of words.
Determine the least common multiple of the charges for each combination of elements in the table. Ignore the plus (+) and minus (−) signs of the charges and just enter numerals. The first row is completed for you.
The least common multiple of the charges for each combination of elements in the table. Ignoring the plus (+) and minus (−) signs of the charges and just entering the numerals. The table is complete as follows.
chlorine(Cl) oxygen(O) nitrogen(N)
Lithium(Li) 1 2 3
magnesium(Mg) 2 1 3
aluminium(Al) 3 2 1
How charged species formed?The charged species formed by losing and gaining of an electrons from an atoms and which called ions.If an atoms lose one and more an electrons then positive charged species formed called cation. If an atoms gain one and more an electrons then positive charged species formed called an anion.To learn more about charged species here.
https://brainly.com/question/20308527
#SPJ2
Answer: the first one is incorrect
Explanation:
During secondary active transport, the movement of one substance down its electrochemical gradient provides the force to move another substance up its electrochemical gradient. When both substances move in the same direction the mechanism is referred to as a(n)
Given what we know about the mechanisms surrounding the biological movement of substances, we can confirm that when two substances in a secondary active transport move in the same direction, it is called a symport.
A secondary active transport harnesses the electrochemical energy generated by its movement of one substance, to aid the movement of the other. These movements can be of two types, depending on the directions:
AntiportSymportAn antiport transport will move both substances in opposite directions, meaning one out of the cell and one into the cell. The transport described in the question is that of a symport, given that it moves both substances in the same direction.
To learn more visit:
https://brainly.com/question/2503897?referrer=searchResults
Someboyd please helppppppp!!!
Sodium: Na+
Iron (II): Fe2+
Iron (III): Fe3+
Titanium (IV): Ti4+
Vanadium (V): V5+
Ammonium: NH4+
I hope this helps! :)
Soil forms layers when mixed with water. sand is found above what ?
Answer:
Explanation:
Clay:)Where does the energy come from to break the bonds of water and carbon dioxide molecules?
Answer:
carbohydrates
Explanation:
or carbon dioxide
- A beam of electrons has.....
(A) Wave properties.
(B) Particle properties.
(C) Both of these
(D) Neither of these
Answer:
(C) Both of these
Explanation:
A beam of electrons has both of these Wave properties and Particle properties.
Vanadium crystallizes in a body-centered cubic lattice, and the length of the edge of a unit cell is 305 pm. What is the density of V
Answer:
5.96 g/cm^3
Explanation:
Corner atom = 1/8
Atoms in center = 1
Atoms in face of the cube= 1/2
Molar mass of V = 50.94 g/mol (from period table)
1 mole = 6.02x10^23
In BCC unit cell:
(8 x 1/8)+ 1=2 per 1 unit cell
Mass: 2(50.94g)/6.02x10^23 = 1.69x10^-22 g/unit cell
305pm=(305x10^-12m÷10^-2m) x (1mL÷1cm^3)
= 2.837 x 10^-23 mL
1pm=10^-12m
1cm=10^-2m
1mL=1cm^3
density=mass/volume
density of V = 1.69x10^-22g÷2.837x10^-23mL
=5.957g/mL
=5.96g/cm^3
I need help with this! I don't fully understand it
Answer:
1. highest is 25.7c° and lowest is 20.0c°
2.Is Exothermic. An Endothermic Reaction is a chemical reaction that absorbs energy in the form of light or heat. In it, the energy or enthalpy of the reactants is less than that of the products. An Exothermic Reaction is a chemical reaction that gives off energy in the form of light or heat.
3. Reactans.
4. The substance(s) to the left of the arrow in a chemical equation are called reactants. A reactant is a substance that is present at the start of a chemical reaction. The substance(s) to the right of the arrow are called products . A product is a substance that is present at the end of a chemical reaction.
Which of the following is NOT a conductor of heat?
A. a plastic pot handle
B. a copper pan
C. a metal spoon
A) A plastic pot handle.
Explanation:Metals are very good conductors of heat because they contain delocalised electrons that can flow through the metal, transferring heat.
Both a copper pan and a metal spoon are made of metals, so are very good conductors of heat.
Plastic is an insulator, the opposite of a conductor. This makes it very bad at conducting heat, which is why it is used as the handle (it stops you burning yourself when you hold the pot). The answer is therefore A.
what is the name of the high-energy compound that cells use to fuel chemical reactions?
Answer: Adenosine triphosphate, or ATP, is the primary carrier of energy in cells. The water-mediated reaction known as hydrolysis releases energy from the chemical bonds in ATP to fuel cellular processes.
Explanation:
If I am calculating the volume in pv=nrt
Then, how do I know what units it is in coz normally it would be m3 but how do I know that it's not dm3
Explanation:
If you use the SI units for P, n, R and T ( In Pa, mol, JK-1mol-1 and K respectively) you'll end up with a Volume with m3 units. So if you have others in different units first convert them into the units I mentioned above and you will definitely get the answer in m3.
Is the gin world scary?
Answer:
Gin= Machine that picks cotton
Explanation:
This Machine was used in the early 1940s to help pick cotton to make things.
Please help I’m soo confused what do you think might account for these similar properties? Explain
Answer:
i wonder...................
Explanation:
discuss the solubility differences between the halogens and the halides in both hexane and water. be sure to define what a halogen and halide are to foundation your discussion.
Halides are ionic substances while halogens nonpolar substances. Hence, halides dissolves in water while halogens dissolve in hexane.
A halogen is an element in group seventeen. The name halogen means salt former. This name came about because many of the halogens form salts. Halides are salts formed by the halogens.
Halogens are diatomic covalent molecules. As such, they are nonpolar molecules and can only effectively interact with nonpolar solvents. Benzene is a nonpolar solvent hence it acts as an effective solvent for the halogens.
The halides are polar compounds hence they do not dissolve in nonpolar solvents such as hexane. Rather, halides dissolve in polar solvents such as water due to dipole - dipole interaction between the ions in the halide and the dipoles in water.
Learn more: https://brainly.com/question/6505878
Complete the sentence.
Atoms form chemical bonds to satisfy the ______
rule and to become _______
What is the relationship between the pressure of a gas and the absolute
temperature?
they don't have any relationship between them
Which of the following are required for plants to carry out photosynthesis?
Group of answer choices
soil
water
carbon dioxide
oxygen
sunlight
Answer:
Carbon dioxide, water, and sunlight
Explanation:
why are water-soluble vitamins less likely to be toxic compared to fat-soluble vitamins?
Answer:
Water-soluble vitamins are not stored in the body and are excreted in the urine quickly. Unlike water-soluble vitamins, fat-soluble vitamins are dissolved in fat and an excess of them would lead to toxicity if consumed in large amounts because it would lead to rancidity, and they are not easily excreted by urine like water-soluble vitamins.
Even when consumed in high doses, water-soluble vitamins are less likely to create problems since they are eliminated through urine rather than stored.
What are vitamins?Vitamins are defined as a collection of molecules required for healthy cell growth, development, and function. While some vitamins support healthy neurons and infection resistance, others may aid in correct blood clotting or food energy absorption.
Water-soluble vitamins are promptly eliminated in the urine and are not retained by the body. In contrast to water-soluble vitamins, which are easily eliminated by urine, fat-soluble vitamins are dissolved in fat. If ingested in excess, they can be harmful due to rancidity and cannot be easily expelled through urine.
Thus, even when consumed in high doses, water-soluble vitamins are less likely to create problems since they are eliminated through urine rather than stored.
To learn more about vitamins, refer to the link below:
https://brainly.com/question/24324739
#SPJ2
Explain how magnesium is produced at the negative electrode from molten magnesium chloride
Answer:
being cation it migerates to cathode to be reduced to elemental magnesium
Explanation:
Mg+2. +2e -----------Mg
Se dispone de un recipiente de 60 litros que contiene un gas de 1,64 atm y a una temperatura de 100K ¿Cuántos moles de gas hay? *
En este caso, dado que se describe un gas del que se conoce el volumen (60L), la presión (1.64 atm) y la temperatura (100K), es posible usar la ecuación del gas ideal para calcular los moles que hay presentes a estas condiciones:
[tex]PV=nRT[/tex]
Ahora, despejamos las moles del gas como sigue:
[tex]n=\frac{PV}{RT}[/tex]
Finalmente, reemplazamos los valores dados, teniendo en cuenta que R es 0.08206 en atmosferas, litros y Kelvin:
[tex]n=\frac{1.64atm*60L}{0.08206*100K}\\\\n=11.8mol[/tex]
Ver más:
https://brainly.com/question/15890754 https://brainly.com/question/22946811type the max number of electrons that can be present in each shell or sub below
n = 5 shell __
n = 2 shell __
n = 2 l = 0 sub: __
n = 2 / 1 sub: __
3d sub: __
2s sub: __
5f sub: __
Explanation:
The maximum no. of electrons in a shell is given by. 2n^2 .
So for
n= 5 , 2× 5× 5 = 50
n=2 , 2×2×2 = 8
For a sub shell the maximum no. of electrons possible is given by 2(2l + 1)
So for n= l= 0
2 [(2×0) +1] = 2
for n=2 l=1
2 [(2×1) + 1] = 6
3d
d sub shell has l= 2 quantum number
Therefore 2[ (2×2) + 1] = 10
2s
s sub shell has l=0 quantum number
2 [(2×0) +1] = 2
5f
f sub energy level has l=3 quantum number
So 2[ (2×3) +1 ] = 14
The azimuthal quantum numbers for the sub shells are as follows
( s ---> 0
p----> 1
d----> 2
f ----> 3 )
under which conditions do you expect helium gas to deviate most from ideal behavior?
Answer:
Explanation:
[2-0] NC Special Operation
[2] Supervisor
[2-1] Emergency Response
[2-2] Juggernaut
[2-3] Commander
[2-4] Division Director
Drag the names to the order planets based their distance from the sun, beginning with the planet closet to the sun.
Answer: In this order
Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, Neptune
Explanation:
Answer:
Mars.....................
Many plant cells have chloroplasts. Which process occurs in chloroplasts?
photosynthesis
respiration
food storage
reproduction
Answer:
photosynthesis
Explanation:
chloroplasts store sugar which is needed for photosynthesis
what is the answer ??z???????
Answer:
Females
Explanation:
Hope that helps
Answer:
The answer may be no characters
If I'm right or wrong plz reply to me
1. (8.5d) A compound has a formula Mg:(PO.). Which best describes the atoms that make up this compound?
A.
B.
Atom
Magnesium (Mg)
phosphorus (0)
Oxygen (0)
Number
2
1
4
Atom
Magnesium (Mg)
Phosphorus (P)
Oxygen (0)
Number
6
2
8
C.
Atom
Magnesium (M)
Phosphorus (2)
Oxygen (0)
Number
3
4
2
D.
Atom
Magnesium (Mg)
Phosphorus (P)
Oxygen (0)
Number
3
2
8
Answer:(8.5d) A compound has a formula Mg:(PO.). Which best describes the atoms that make up this compound? A. B. Atom Magnesium (Mg) phosphorus (0) Oxygen (0)
Explanation:
How many moles are present in 1.39 grams of carbon?
Answer:
0.116 moles
Explanation:
To go from grams to moles, you take the given mass (1.39g) and divide it by the molar mass (which is about 12 grams for Carbon). This gives you the moles. I have attached my work below.
Hope this helps! :^)
Please help me.
a 750 sample of technetium-99 decays in 4 half lifes, how much of the sample will remain?
Answer:
93.75
Explanation:
In first half life 750×1/2 will remain
In second one half from that remained at the end of first half life will remain
That is 1/2 × 750×1/2
likewise at the end of 3rd half life 1/2 × 1/2 ×750×1/2 remains
at the end of 4th half life 1/2 × 1/2 × 1/2 ×750×1/2 remains
1/2 × 1/2 × 1/2 ×750×1/2 = 93.75 remains.
You can also use the equation
Remainder = X × 1/2^n .
This saves time
n= no. of half lives
X= initial amount
so in this case 1/2^4 × 750 = 93.75
what makes your pulse? Explain