a solid conducting sphere (or a disk in two dimensions) is charged positively. describe what the distribution of these charges is after they come to equilibrium. drawing a picture would be helpful.

At a distance of approximately 0.068 m from the positive charge along the line connecting the two charges, the electric field caused by the positive charge is zero.

Each point in space has an electric field associated with it when there is charge present in any form. The strength and direction of the electric field are expressed by the value of E, also referred to as the electric field strength, electric field intensity, or simply the electric field.

The Coulomb's law determines the electric field caused by a point charge Q at a distance r:

E = kQ/r²

where k is the Coulomb constant, k = 9 × 10⁹ N·m²/C².

Let the distance between the two charges be d = 100 mm = 0.1 m.

kQ1/x² = kQ2/(d-x)²

where x is the distance from the positive charge to the point where the electric field is zero, Q1 = 6.5 nC, and Q2 = -2.5 nC.

Solving for x, we get:

x = d Q1 / (Q1 - Q2)(1/2)

Substituting the given values, we get:

x = 0.1 m × 6.5 nC / (6.5 nC + 2.5 nC)(1/2)

x ≈ 0.068 m

To know more about electric field visit:-

https://brainly.com/question/15800304

#SPJ4

The height of the object is 11.5 meters.

Assuming the acceleration due to gravity is -9.8 m/s^2 (taking downwards as the positive direction), we can use the kinematic equation:

h = (v^2 - u^2) / (2g)

where h is the maximum height reached, v is the final velocity (which is zero at the highest point), u is the initial velocity (15 m/s), and g is the acceleration due to gravity (-9.8 m/s^2).

Plugging in the values, we get:

h = (0^2 - 15^2) / (2 x (-9.8))

h = 11.5 meters

Therefore, the ball goes up to a height of 11.5 meters before coming back down.

Learn more about height below.

https://brainly.com/question/27243378

#SPJ1

The response of a FIR filter is based on a mathematical formula that derives the output signal from the input samples acquired both in the present and in the past.

A. The causal and FIR system given by h[n] = (0.8j)n-2 u[n+2] exists. Since the impulse reaction solely depends on the input's current and future values, it is causal.

B. The h[n] = (0.8j)n-2 u[n-2] system is noncausal and FIR. Because the impulse reaction is dependent on the input's future values, it is not causal.

C. The causal and FIR nature of the system described by h[n] = (0.8j)n-2 (u[n+1] – u[n-5]). Since the impulse reaction solely depends on the input's current and future values, it is causal. The impulse response h[n] is zero for n 0 and for n 0, which is another reason why it is FIR.

D. The causal and IIR nature of the system depicted by h[n] = (0.8j)n u[n-3] – (0.8j)n u[n-10] is established. The impulse response is causal since it only depends on the input's recent and previous values, and it is IIR because the impulse response, h[n], is non-zero for all n.

D. The causal and IIR nature of the system described by h[n] = (0.8j)n u[n] – (0.8j)n-10 u[n-10] is shown. The impulse response is causal since it only depends on the input's recent and previous values, and it is IIR because the impulse response, h[n], is non-zero for all n.

Therefore, They are easy to design, having a linear phase response, and good precision and control over the output signal.

Learn more about impulse here:

https://brainly.com/question/23730983

#SPJ4

The best description of kinetic energy is a. the energy an object has due to its motion.

Kinetic motion based energy is a type of energy that has objects in movement, conversely to the potential energy that is contained by objects at rest, which are the two main sources of energy in the universe and may be used to explain all other types of sources.

Therefore, with this data, we can see that kinetic motion based energy is a type of energy in movement that can be used when performing work.

Learn more about kinetic energy here:

https://brainly.com/question/25959744

#SPJ1

The Doppler shift of a star is most easily detected in B. its continuous spectrum.

The Doppler effect occurs whenever there is a proximity or separation between a source of mechanical or electromagnetic waves and an observer. In the approximation case, the observed frequency is greater than the frequency emitted by the source. In case of displacement, the observed frequency is lower than the frequency emitted by the source.

The Doppler effect is used to measure the speed of objects by means of waves emitted by radio frequency or laser based devices, such as radar. In Astronomy, this phenomenon is used to measure the relative speed of stars and other celestial bodies with respect to planet Earth.

Learn more about Doppler effect at

https://brainly.com/question/9165991

#SPJ4

The acceleration of the object at t = 4 is [tex]-5/2 \ m/s^2[/tex]. The correct answer is B.

The acceleration of the object at t = 4 can be found by taking the second derivative of the position function s(t). Acceleration is the rate at which an object changes its velocity with respect to time. It is a vector quantity, meaning that it has both magnitude and direction. The first derivative of s(t) is the velocity function v(t), and the second derivative is the acceleration function a(t).

The first derivative of s(t) is:
[tex]v(t) = d/dt [14 + 20 \sqrt t] \\

= 20/(2\sqrt t)

\\= 10/\sqrt t[/tex]
The second derivative of s(t) is:
a(t) =[tex]d/dt [10\sqrt t][/tex]

=> [tex]-10/(2t^{(3/2)})[/tex]

=>[tex]-5/(t^{(3/2)})[/tex]
Plugging in t = 4 into the acceleration function gives:
a(4) = [tex]-5/(4^{(3/2)})[/tex]

= -5/(8)

= -5/2

To learn more about Acceleration :

https://brainly.com/question/26408808

#SPJ11

The formula s = r, where is expressed in radians, gives the length s of arc that is captured on a circle with radius r by such an angle of measure radians.

The arc length for an angle of 360 degrees subtended at the center is just the circle's circumference, which is equal to 2r, where r is the radius of the circle. The arc length momentum for an aspect of will be 360 2 r = 180 r.

A radian is the unit of measurement for an angle that, when represented by a right triangle, subtends the arc whose length is equal to the circle's radius. One radian is the length of the angle, or m. (Hence the naming.)

To know more about momentum visit :

https://brainly.com/question/15415203

#SPJ4

the spring constant is zero.

We need to know the force and the displacement in order to compute the spring constant. The data provided can be used to determine the forces acting at the oscillation's two extremes:

When the displacement is at its greatest, x = 0.25 nm - 0.20 nm = 0.05 nm.

F = -kx = -(k)(0.05 nm) (0.05 nm)

x = 0 when in the equilibrium position.

F = -kx = 0

We may set the two forces equal to one another because the force is zero in the equilibrium position:

-(k)(0.05 nm) = 0

After finding k, we obtain:

k = 0 N/m

The spring constant is thus equal to zero. Since a spring with a zero spring constant would not exert any force on the ions, this result is not physically significant.

learn more about spring constant

https://brainly.com/question/14670501

#SPJ4

These forces can be seen as a free-body image where we compress the book to a point. The force vectors are then positioned so that their tails are of the vectors point with in plane of the interaction.

Choosing the structure within which the rules of motion will be applied is the first stage. Finding the forces at work on the given software or particle for interest is the second stage. The full body diagram must be drawn in the third phase.

The height of the arrow serves as a symbol for a vector's magnitude. An indication of a scale, such as 1 cm = 5 miles, is made, and the arrow is drawn at the appropriate length using the selected scale. The precise direction is shown by the arrow.

To know more about motion visit :

https://brainly.com/question/22810476

#SPJ4

The following is a Tesla high-frequency current that enhances its ability to kill germs.

The correct option is B.

any agent or method that eradicates microorganisms (bacteria, viruses, and other microorganisms that can cause infection and disease).

High frequency current passes the cell membrane and runs through the entire water content of the tissue whereas low frequency current circulates around the cells. A typical method that is useful in figuring out illness processes and treatments is determining bodily fluids.

High-frequency fields are defined as electric and magnetic fields with frequencies between 100 kilohertz and 300 gigahertz. Most of the time, an antenna emits high-frequency electromagnetic fields.

To know more about high-frequency current visit:

https://brainly.com/question/1506388

#SPJ4

I understand That the question you are looking for is:

Which of the following is Tesla high-frequency current used for?

A: decreasing skin metabolism

B: improving germicidal action

C: slowing blood circulation

D: decreasing elimination and absorption

The time taken for the trip observer's point of view is 1.05 years.

The trip will take 1.00 ly / (.950c - .800c) = 5.00 years as measured in the messenger's rest frame. This is because the messenger is moving relative to both the armada and the ground station, so we must use the relative speed between the messenger and the armada to calculate the time it takes for the messenger to travel from the rear to the front of the armada.

The trip will take 1.00 ly / (.950c - .800c) = 5.00 years as measured in the armada's rest frame. This is because the armada is also moving relative to both the messenger and the ground station, so we must use the relative speed between the armada and the messenger to calculate the time it takes for the messenger to travel from the rear to the front of the armada.

The trip will take 1.00 ly / .950c = 1.05 years as measured in an observer's point of view in frame S. This is because the observer in frame S is not moving relative to either the armada or the messenger, so we can simply use the speed of the messenger relative to frame S to calculate the time it takes for the messenger to travel from the rear to the front of the armada.

To learn more about Time taken :

https://brainly.com/question/30073647

#SPJ11

The acceleration of the proton is 7.6×10¹⁰ m/s² in the direction of the electric field.

Electrostatic forces are both attractive and repulsive forces caused by charged particles. Also known as Columbus Power. The Colombes attraction is named after French scientist Charles Augustin de Coulomb. However, his one of his four fundamental forces of nature is the electrostatic force.  

- The force on a charged particle due to an electric field is given by: F = qE

where q is the charge = 1.6×10⁻¹⁹C

and E is the electric field = 800N/C

Also, from Newton's laws of motion;

F = ma

where m is mass = 1.67×10⁻²⁷kg and a is acceleration

ma = qE

a = qE/m

a =  (1.60 x10^-19x800)/(1.67 x 10^-27 )

a = 7.6x10^10

towards the direction of the electric field.

Learn more about electrostatic force:

https://brainly.com/question/14543356

#SPJ4

The intermolecular forces that would occur between glycine and water include hydrogen bonding and dipole-dipole interactions.

Glycine is a polar molecule that contains both polar functional groups (an amino group and a carboxyl group) and a nonpolar side chain (a hydrogen atom). Water is also a polar molecule due to its bent shape and polar O-H bonds.

When glycine is mixed with water, it can form hydrogen bonds with water molecules through the hydrogen bonding sites on the amino and carboxyl groups of glycine. The hydrogen bonding sites on the amino and carboxyl groups of glycine can form hydrogen bonds with the partially negative oxygen atoms of water molecules.

Additionally, the polar nature of glycine can also cause dipole-dipole interactions with water molecules. The polar amino and carboxyl groups of glycine have partial positive and negative charges that can interact with the partially positive and negative charges on the water molecules.

Learn more about hydrogen bonds here brainly.com/question/1619599

#SPJ4

The line of action of the comparable force, which is exerting pressure on the bracket, intersects its bottom edge 4.19 inches from point C.

We may apply the concept of vector addition to transform the four forces into a single equivalent force. We begin by creating a schematic and assigning names to the forces:

    T81 lb        T82 lb

      |             |

      |             |

      |             |

   ---C-------------D--

TA1 lb |          TA2 lb

      |             |

      |             |

      |             |

      F             E

We can represent each force as a vector, with its magnitude and direction. To simplify the diagram, we can choose a convenient scale for the vectors, such as 1 inch = 10 lb. Then, the vectors can be drawn with lengths proportional to their magnitudes.

Next, we draw the vector sum by placing the tail of each vector at the head of the previous one. The resulting vector represents the equivalent force:

    T81 lb        T82 lb

      |             |

      |             |

      |             |

   ---C-------------D--

TA1 lb |          TA2 lb

      |             |

      |             |

      |             |

      F             E

      \             /

       \           /

        \         /

         \       /

          \     /

           \   /

            \ /

             X

You can calculate the intersection of the bottom edge of the bracket and the line of the comparable force by taking moments around any point on the edge. Since point C is on the force's path, we can pick it as a convenient choice. The moment formula is:

TA1(4) + T81(2) - TB2(dC) - TA2(10) - T82(dD) = 0

where dC and dD are the distances from points C and D to the line of action of the force, respectively. Solving for dC, we get:

dC = (TA1(4) + T81(2) - TA2(10) - T82(dD)) / TB2

We can substitute the given values and solve for dD:

dD = (TA1(4) + T81(2) - TA2(10) - T82(125°)) / TB2

   = (-480) / 150

   = -3.2 inches

The negative sign indicates that the point of intersection is to the left of point D. To find the distance from point C, we can use the moment equation again:

TA1(4) + T81(2) - TB2(dC) - TA2(10) - T82(dD) = 0

solving for dC, we get:

dC = (TA1(4) + T81(2) - TA2(10) - T82(dD)) / TB2

   = (480 + 210 + 160 - 150(3.2)) / 150

   = 4.19 inches

Therefore, the point of intersection is 4.19 inches from point C.

Learn more about pressure here:

https://brainly.com/question/12977546

#SPJ4

The speed of the meteoroid when it strikes the Sun can be calculated using the formula for the escape velocity, which is the minimum speed an object must have in order to escape from the gravitational pull of a planet or star.

The formula for escape velocity is:

v_escape = (2GM/R)^(1/2)

where G is the gravitational constant (6.67 x 10^-11 N m^2/kg^2), M is the mass of the Sun, and R is its radius.

Plugging in the values, we get:

v_escape = (2 * 6.67 x 10^-11 * 2 x 10^30 / 6.96 x 10^8)^(1/2)

v_escape = 617.7 km/s

So the meteoroid strikes the Sun with a speed of approximately 617.7 km/s.

Newton's First Law, also known as the Law of Inertia, does not apply when considering fictitious forces in a non-inertial reference frame.

In a non-inertial reference frame, the observer is accelerating, which means that they are subject to non-zero net forces. To explain the motion of objects within this frame of reference, we need to introduce fictitious forces that appear to act on the objects. These fictitious forces are not actual physical forces but are instead apparent forces that arise due to the acceleration of the observer.

Newton's First Law states that an object will remain at rest or in uniform motion in a straight line unless acted upon by an external force. However, in a non-inertial reference frame, objects appear to experience fictitious forces that cause them to deviate from this straight-line motion. Therefore, Newton's First Law does not apply in such frames of reference.

You can learn more about Newton's First Law at

https://brainly.com/question/1222214

#SPJ4

The magnitude of the electric field is 275 V/m.

The potential difference between the ends of a 2-meter stick that is parallel to a uniform electric field is 550 V. To find the magnitude of the electric field, we can use the formula:

Electric field = Potential difference / Distance

In this case, the potential difference is 550 V and the distance is 2 meters. Plugging these values into the formula, we get:

Electric field = 550 V / 2 m

Electric field = 275 V/m

Therefore, the magnitude of the electric field is 275 V/m.

In conclusion, the potential difference between the ends of a 2-meter stick that is parallel to a uniform electric field is 550 V, and the magnitude of the electric field is 275 V/m.

To know more about potential differences, refer here:

https://brainly.com/question/21808222#

#SPJ11

The height of the cliff is approximately 248.5 meters. It's important to note that this estimate assumes that air resistance is negligible and that the stone is dropped vertically.

We can use the kinematic equation for the vertical motion of the stone to estimate the height of the cliff:

h = 1/2 * g * t^2

where h is the height of the cliff, g is the acceleration due to gravity (9.81 m/s^2), and t is the time taken for the stone to hit the water.

In this case, the time taken for the stone to drop is 7.1 seconds, so we have:

h = 1/2 * (9.81 m/s^2) * (7.1 s)^2

h = 248.5 meters (rounded to one decimal place)

Therefore, the height of the cliff is approximately 248.5 meters. It's important to note that this estimate assumes that air resistance is negligible and that the stone is dropped vertically. In reality, these assumptions may not hold true, so the actual height of the cliff may be slightly different.

One way to estimate the height of a cliff is to use the fact that sound travels at a fixed speed, which is approximately 343 meters per second at room temperature and standard atmospheric pressure. By measuring the time it takes for a sound to travel from the top of the cliff to the bottom and back up, we can estimate the distance between the top of the cliff and the ground.

However, it can be difficult to produce a sound that is loud enough to be heard at the bottom of a cliff, especially in outdoor settings with a lot of ambient noise. A simple alternative is to use the time it takes for a stone to fall from the top of the cliff to the bottom, and then use the kinematic equations of motion to estimate the height of the cliff.

Learn more about kinematics here;

https://brainly.com/question/7590442

#SPJ4

For r = 10 cm, electrostatic force is -[tex]5.4 * 10^-5 N[/tex] and for r - 1.4 cm, it is [tex]-3.9 * 10^-3[/tex] N. We use Coulomb's law. Work is shown.

To calculate the electrostatic force between two point charges, we use Coulomb's law, which states that the force between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. Mathematically, this can be expressed as:

F =[tex]k * q1 * q2 / r^2[/tex]

where F: force, q1 and q2: charges, r : charges distance, and k: Coulomb constant.

Let's assume we have two point charges, q1 and q2, and we want to calculate the electrostatic force between them for two different distances, r = 10 cm and r = 1.4 cm.

For the distance r = 10 cm, assuming the charges are q1 = +2 C and q2 = -3 C, the force can be calculated as follows:

F =[tex]k * q1 * q2 / r^2[/tex]

F = [tex](9 * 10^9 N*m^2/C^2) * (2 C) * (-3 C) / (0.1 m)^2[/tex]

F =[tex]-5.4 * 10^(-5) N[/tex]

For the distance r = 1.4 cm, assuming the same charges, the force can be calculated as follows:

F =[tex]k * q1 * q2 / r^2[/tex]

F = [tex](9 x 10^9 N*m^2/C^2) * (2 C) * (-3 C) / (0.014 m)^2[/tex]

F =[tex]-3.9 * 10^-3 N[/tex]

Learn more about electrostatic force here:

https://brainly.com/question/9774180

#SPJ4

The correct statement describing the relationship between the electric field and the motion of the electron is (A) - The electron experiences a force of magnitude F=qE at point A, which accelerates the electron in the direction of the electric field.

As the electron is placed in a uniform electric field of magnitude E directed to the right, it experiences a force of magnitude F=qE in the same direction. This force accelerates the electron in the direction of the electric field.

Hence, the electron moves from point A to point B due to the force exerted on it by the electric field. Therefore, option (A) is the correct statement that describes the relationship between the electric field and the motion of the electron.

For more questions like Electric field click the link below:

https://brainly.com/question/8971780

#SPJ4

A perfectly compensated semiconductor is one in which the donor and acceptor impurity concentrations are exactly equal: [tex]P_{0} = 10^{5} cm^{-3}[/tex]

For a compensated semiconductor with contributor concentration more prominent than the acceptor concentration, the greater part camer political decision concentration is determined as

[tex]n_{0} =\sqrt{(N_{d} - N_{a } /2 ) ^{2} + n^{2}[/tex]i

With Nd -na the above equation becomes

n0 ≅Nd- Na

Likewise, the charge camers at warm equititou adhere to mass-activity regulation,

n0P0 = n2i

Application

Given:

N-2.25-10% on

n-1.5-102cm

Non, the masty camer efecto concentration will be

N-2.25-10cm 1

Site the contributor concentration is more prominent than the acceptor concentration, the material will be n-type with the majonty camer electron concentration as

76 No-N,

D-2.25x10 cm

The miliouty camur opening concentracion is acquired involving mass activity regulation as

[tex]P_{0} = 10^{5} cm^{-3}[/tex]

to know more about semiconductor click here:

https://brainly.com/question/10618523

#SPJ4

The wavelength of an analog signal is the distance travelled by the wave in the time defined by it's period. Correct option is A.

An analogue signal is a continuously varying signal that represents another time-based variable with one time-varying quantity. The two variables are equivalent, in other words.

A sort of signal that is conveyed as a continuous wave is an analogue signal. Volts are used to measure the analogue signal. Since it is a continuous signal, a particular time period can include an endless number of values. They can be measured in terms of frequency or amplitude across time. Analog signals deteriorate with distance. As a result of the interferences' high noise output, the transmission quality degrades during transmission.

Thus, the wavelength of an analog signal is distance traveled by the wave in the time defined by it's period and correct option is A.

To know more about analog signal:

https://brainly.com/question/771492

#SPJ4

The required sled's speed after it has travelled the first 140 m is calculated to be 19.31 m/s.  

The sled's maximum speed is listed as 9.2 m/s.

The angle of the slope is 6 degrees downward.

Distance travelled by the sled is 140 meters.

The ratio of a body's mass to its acceleration determines the force acting on it.

The inclined plane's acceleration can be expressed as,

a = Fg/m = m g sinθ/m = g sinθ

where,

Fg is force due to gravity

a is acceleration of the body

Put the values as follows in the equation above:

a = 9.81 × sin 6° = 1.03 m/s²

The equation of motion may now be used to get the sled's speed as,

v² - u² = 2 a s

v² - 9.2² = 2 × 1.03 × 140

v² - 9.2² = 288.4

v² = 84.64 + 288.4

v = 19.31 m/s

Thus, the sled's speed after it has travelled the first 140 m is 19.31 m/s.

To know more about speed:

https://brainly.com/question/13257384

#SPJ4

The equation supports his conclusion is about calories

[tex](2720 calories - 2700 calories) * f'[/tex][tex]=0.2[/tex]

Calories are a unit of measurement used to measure the energy value of food. The average person needs to consume a certain number of calories each day in order to maintain their body weight. Eating too many calories can lead to weight gain, while eating too few can lead to weight loss.The ratio of calories ingested to calories burnt via exercise must be maintained in order to maintain a healthy weight.

Assuming Sam's current daily calorie intake is 2700 calories, the equation that supports his conclusion is:

Weight (in pounds) = [tex](2720 calories - 2700 calories) * f'[/tex]

Weight (in pounds) = [tex]0.2 * f'[/tex]

Weight (in pounds) =  [tex]0.2[/tex]

Therefore,The equation supports his conclusion is

[tex](2720 calories - 2700 calories) * f'[/tex][tex]=0.2[/tex]

learn more about Calories Refer:brainly.com/question/14688886

#SPJ4

complete question:(e) suppose that sam reads about f' in this study and draws the following conclusion: if sam increases his average calorie intake from 2700 to 2720 calories per day, then his weight will increase by approximately 0.2 pounds. fill in the blanks below so that the equation supports his conclusion.

f' (           )=(       )

The final speed of the student will be 30 m/s.

speed is described as. the pace at which an object's location changes in any direction. Speed is defined as the distance traveled divided by the travel time. Speed is a scalar quantity because it just has a direction and no magnitude.

Given, a physics student skis down a slope with a constant acceleration of 2.0 m/s² for 15 seconds.

So,

a = 2 m/s²

t = 15 Second

u(initial velocity) = 0

Thus, from the equations of motion

v = u + at

v = 0 + 15 *2

v = 30 m/s

Therefore, the final speed of the student will be 30 m/s.

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ1

The pressure changes when the volume is changed.

Your question is incomplete thus I will take a general approach of the relationship of pressure and volume.

Pressure changes with volume because of the relationship between the number of gas molecules, the volume they occupy, and the temperature of the gas.

According to Boyle's Law, which describes the relationship between pressure and volume at a constant temperature, when the volume of a gas is decreased, the gas molecules become more crowded and collide with the container more frequently, resulting in an increase in pressure. Conversely, when the volume of a gas is increased, the gas molecules have more space to move around, resulting in a decrease in pressure.

Learn more about gas pressure:https://brainly.com/question/18124975

#SPJ1

The net flux through the Gaussian surface when the surface is replaced by a cube of the same volume does not change.

The net flux through the spherical Gaussian surface will be the same as the flux through the cube of the same volume whose center is at the same point. This is because the electric field due to the positive test charge is spherically symmetric and the flux through a closed surface only depends on the charge enclosed by the surface, not on the shape of the surface.

The flux through the cube may be more difficult to calculate due to its shape, but the value will be the same as the flux through the spherical Gaussian surface. Therefore, the answer is: No change.

To know more about the Gaussian surface, here

brainly.com/question/30509247

#SPJ4

Position and velocity both have transverse components for motion in polar coordinates. However, acceleration can be expressed as the sum of a radial component and a tangential component, where the tangential component is transverse to the radial direction. Therefore, the answer is Acceleration (Option 3).

An object's acceleration can be defined as the rate at which its velocity changes in relation to the passage of time. Accelerations are vector quantities. The orientation of the net force that is acting on an item is what determines the orientation of the acceleration the object is experiencing.

Particle dynamics studies particle motion and forces. Without a net force, a body has a constant velocity. The net force on a body must be zero to prevent acceleration.

Want to know more about coordinates visit the link which is given below;

https://brainly.com/question/27749090

#SPJ4

The minimum distance that the cushion must compress on impact to ensure that the egg is unscathed is 0.2184m or about 22 cm.

To find the minimum distance that the cushion must compress on impact to ensure that the egg is unscathed, we can use the impulse-momentum theorem. The impulse-momentum theorem states that the change in momentum of an object is equal to the impulse applied to it. In this case, the change in momentum of the egg is equal to the impulse applied by the cushion.

The change in momentum of the egg is given by:

Δp = mvf - mvi

where m is the mass of the egg, vf is the final velocity of the egg, and vi is the initial velocity of the egg.

The impulse applied by the cushion is given by:

I = FΔt

where F is the average force applied by the cushion and Δt is the time over which the force is applied.

Since the egg comes to a stop after hitting the cushion, vf = 0. Therefore, the change in momentum of the egg is:

Δp = -mvi

Setting the change in momentum is equal to the impulse applied by the cushion and rearranging gives:

FΔt = mvi

F = mvi/Δt

We are given that the initial velocity of the cushion is 12 m/s and the mass of the egg is 85-g or 0.085-kg. We are also given that the force applied by the cushion must be less than 28 N to prevent the egg from breaking. Substituting these values into the equation for F gives:

28 N = (0.085-kg)(12 m/s)/Δt

Solving for Δt gives:

Δt = (0.085-kg)(12 m/s)/(28 N) = 0.0364 s

Now, we can use the equation d = vavgΔt to find the minimum distance that the cushion must compress. The average velocity of the cushion during the compression is given by:

vavg = (vi + vf)/2 = (12 m/s + 0 m/s)/2 = 6 m/s

Substituting the values for vavg and Δt into the equation for d gives:

d = (6 m/s)(0.0364 s) = 0.2184 m

Therefore, the minimum distance that the cushion must compress on impact to ensure that the egg is unscathed is 0.2184m or about 22 cm.

To know more about impulse, refer here:

https://brainly.com/question/16980676#

#SPJ11

Answer:

Below

Explanation:

W = F X d      and F = m a

W = m a d = 70 kg   * 9.81 m/s^2   * 28.3 m  = 19434 J