A student connects a 21.0 V battery to a capacitor of unknown capacitance. The result is that 52.8 µC of charge is stored on the capacitor. How much energy (in J) is stored in the capacitor?

Answer:

ghgivjgifigo ra together aigig disgust u hoodie

Answer:

Explanation:

conservation of momentum

m(u) + M(0) = (m + M)v

u = (m + M)v/m

u = (0.250 + 1.35)(11.9) / 0.250

u = 76.16

u = 76.2 m/s

That's a fairly massive, and slow, bullet.

The change in potential energy is 6324 Joules while the power is 263.5 Watts.

Potential energy is the amount of energy possessed by a body due to its position relative to another object.

a) Potential energy = weight * height = 510 N * 4 flight * 3.1 m per flight

Potential energy = 6324 Joules

b) Power = Energy / time = 6324 Joules / 22 seconds = 263.5 Watts

The change in potential energy is 6324 Joules while the power is 263.5 Watts.

Find out more on potential energy at: https://brainly.com/question/14427111

Explanation:

this is the answer to the questions

Answer:

Explanation:

The degree of hotness and coldness of air is known as temperature and is measured with a thermometer in degrees-Fahrenheit or degrees-Celsius. Mercury is the only one in the liquid state at room temperature. It is used in thermometers because it has a high coefficient of expansion. The flow of heat will be always from higher to lower temperature.

PLS MARK ME WITH BRAINLEST

Answer:

1. D electron cloud

2. A nucleus

3. E electron

4. B neutron

5. C proton

Explanation:

electrons are located outside the nucleus. The nucleus holds the protons and neutrons. Protons have a positive symbol (+). electron cloud holds the electrons.

Explanation:

Electron cloud : D

Nucleus : A

Electron : E

Neutron : B

Proton : C

hope this helps you.

Answer:

Explanation:

The father of the Multitude was Abraham. And he did precede the 10 commandments. But the story really has nothing to do with the 10 commandments.

He obeyed God's Command because it was God who issued it. Abraham had complete faith in God's ability to make things come out right. The sacrifice of Isaac was a test of faith.

I would advise you to answer true, but whoever wrote the question employed a twisted kind of logic. The sacrifice of Isaac had nothing to do with the 10 commandments. Thou Shalt not murder is not really covered by this circumstance.

So true might not be the correct answer. The question is very complex and does not lend itself to a simple True/ False answer.

Hi there!

We can use the work-energy theorem to solve.

Recall:

[tex]\large\boxed{E_i = E_f}}[/tex]

Initial energy = final energy

The initial energy is purely potential (she starts from rest), and, if we assign the bottom of the slope as the 0 line, her energy at the bottom is purely kinetic.

PE = mgh

KE = 1/2mv²

We can begin by setting the two equal:

mgh = 1/2mv²

Cancel out the mass and rearrange to solve for velocity:

2gh = v²

v = √2gh

Plug in given values and use g ≈ 10 m/s²:

v = √2(10)(20) = 20 m/s

Answer:

3 v

Explanation:

Answer:

Work = force * displacement

= 50 N * 20 Meter

=1000 Newton meter = 1000 joule .

Explanation:

Answer:

[tex]0.2\; {\rm T}[/tex], assuming that the speed of the electron stays the same.

Explanation:

Let [tex]v[/tex] denote the speed of this electron. Let [tex]q[/tex] denote the electric charge on this electron. Let [tex]m[/tex] denote the mass of this electron.

Since the path of this electron is a circle (not a helix,) this path would be in a plane normal to the magnetic field.

Let [tex]B[/tex] denote the strength of this magnetic field. The size of the magnetic force on this electron would be:

[tex]F = q\, v\, B[/tex].

Assuming that there is no other force on this electron. The net force on this electron would be [tex]F = q\, v\, B[/tex]. By Newton's Second Law of motion, the acceleration of this electron would be:

[tex]\begin{aligned}a &= \frac{F}{m} \\ &= \frac{q\, v\, B}{m}\end{aligned}[/tex].

On the other hand, since this electron is in a circular motion with a constant speed:

[tex]\begin{aligned} a = \frac{v^{2}}{r} \end{aligned}[/tex].

Combine the two equations to obtain a relationship between [tex]r[/tex] (radius of the path of the electron) and [tex]B[/tex] (strength of the magnetic field:)

[tex]\begin{aligned}\frac{q\, v\, B}{m} = \frac{v^{2}}{r}\end{aligned}[/tex].

Simplify to obtain:

[tex]\begin{aligned}r &= \frac{m\, v^{2}}{q\, v\, B} \\ &= \frac{m\, v}{q\, B} \\ &= \left(\frac{m\, v}{q}\right)\, \frac{1}{B}\end{aligned}[/tex].

In other words, if the speed [tex]v[/tex] of this electron stays the same, the radius [tex]r[/tex] of the path of this electron would be inversely proportional to the strength [tex]B[/tex] of the magnetic field. Doubling the radius of this path would require halving the strength of the magnetic field (to [tex]0.2\; {\rm T}[/tex].)

[tex]\huge \bf༆ Answer ༄[/tex]

The Correct choice is ~ A

If an object moves at a constant velocity, then the change in velocity over the time is 0, Acceleration is defined as rate of change in velocity but since there is no change in velocity, the value of Acceleration is equal to Zero.

Yes, it's possible to predict the speeds that a coaster will reach before it’s

ever placed on the track.

This is usually calculated with the potential energy which is

Potential energy = m g h

where m is mass, g is acceleration due to gravity and h is height.

The given formula above is used in predicting the speeds that a coaster will

reach before it’s ever placed on the track.

Read more about Speed here https://brainly.com/question/14298262

Answer:

[tex]\frac{a_{d}}{a_{i}} = \frac{(1 -mu)}{mu}[/tex]

= (1 - μ)/μ

Explanation:

Always draw a diagram!

Up the incline:

[tex]Fr_{max}[/tex] = maximum friction

[tex]Fr_{max}[/tex] = μk

k = R = mg.cos(45) = mg.sin(45)

Resolution of forces parallel to the slope:

F (Fp in the diagram) = force of propulsion

g = gravity

[tex]F - Fr_{max} = ma_{i}[/tex]

[tex]F -[/tex] μ.mg.cos(45) [tex]= ma_{i}[/tex]

Down the decline:

Resolution of forces:

[tex]mg.sin(45) - Fr_{max} = ma_{d}[/tex]

[tex]mg.sin(45) -[/tex] μ.mg.cos(45) [tex]= ma_{d}[/tex]

Then, find the ratio:

[tex]\frac{ma_{d}}{ma_{i}} = \frac{mg.sin(45) - mu.mg.cos(45)}{-F + mu.mg.cos(45)} \\\\ \frac{a_{d}}{a_{i}} = \frac{k - k.mu}{-F + k.mu} \\\\ = \frac{k(1 -mu)}{-F + k.mu}[/tex]

Potentially, there is no need to consider F in this situation, in which case:

[tex]\frac{a_{d}}{a_{i}} = \frac{k(1 -mu)}{k.mu} \\\\ = \frac{(1 -mu)}{mu}[/tex]

= (1 - μ)/μ

Answer:

I'm no Bible person, but I think it stands for i-dont-give-a-donkey-poop.

and suck-dog-nuts.

Answer:

*1) 100 Joule energy

*2) 101.2 m/s

Explanation:

*1) 1J = 1w

100J = 100w

*2) A 70-kg person will have to run at a speed of 101.2 m/s to have that amount of kinetic energy.

Answer:

Change in velocity is the integral of all the differential accelerations acting over the period of acceleration.

[tex]20 = u + \int\limits^4_0 {2t} \, dt[/tex]

20 = u + t²[tex]\left \{ {{4} \atop {0}} \right.[/tex]

20 = u + 4² - 0²

20 = u + 16

u = 4 m/s

Hi there!

To solve, we must begin by calculating the total WORK done on the object.

W = F · d (Force · displacement)

Plug in the given values. Remember to convert km to m:

1 km = 1000 m

0.6 km = 600 m

W = 60 · 600 = 36000 J

Now, we can solve for power:

P = W/t

Convert minutes to seconds:

1 min = 60 sec

20 min = 1200 sec

P = 36000/1200 = 30 W ⇒ Choice D.

Answer:

 C = 0.025F

Explanation:

Charge =q=3×[tex]10^{-6}[/tex]C

Voltage=V=120V

Q=CV

C=Q/V

   =3×[tex]10^{-6}[/tex]/120

   =1/40×[tex]10^{-6}[/tex]

        C = 0.025F

         C=2.5 [tex]10^{-4}[/tex]C  0r  25 ×[tex]10^{-3}[/tex]F

Answer:

e. 5.6 x 10^21 electrons.

Explanation:

In order to calculate the charge Q passing through the resistor for in a definite amount of time is

[tex]Q \ (\mathrm{coulombs}) \ = \ I \ (\mathrm{amperes}) \ \times \ t \ (\mathrm{seconds}) \\ \\ \-\hspace{2.22cm} = \ 3.0 \ \mathrm{A} \ \times \ 5.0 \ \mathrm{min} \ \times \ \displaystyle\frac{60 \ \mathrm{sec}}{1 \ \mathrm{min}} \\ \\ \-\hspace{2.22cm} = \ 900 \ \mathrm{C}[/tex]

Thus, using the law of quantization of electric charge, the number of electrons passing through the resistor during this time interval can be calculated.

[tex]Q \ = \ n \times e \\ \\ n \-\hspace{0.18cm} = \ \displaystyle\frac{Q}{e} \\ \\ n \-\hspace{0.18cm} = \displaystyle\frac{900 \ \mathrm{C}}{1.6 \times 10^{-19} \ \mathrm{C}} \\ \\ n \-\hspace{0.18cm} = 5.6 \times 10^{21} \ \ \mathrm{electrons}[/tex], where n denotes the number of electrons and e is the unit charge of an electron ([tex]1.6 \times 10^{-19} \ \mathrm{C}[/tex]).

The answer is:

That they are switched on

First we have to find out the gravity on that planet. We use Newton second equation of motion. It is given as,

s = ut +(gt^2)/2

Distance s = 25m

Time t = 5 s

Velocity u = 0

By putting these values,

25 = 1/2.g.(5)²

g = 2

So the gravity on that planet is 2. Lets find out the weight of the astronaut.

Mass of the astronaut on earth m = 80 kg

Weight of astronaut on earth W = mg = (80)(9.8) = 784 N

Weight of astronaut on earth like planet = (80)(2) = 160 N

x = 160N

Answer:i am pro

kExplanation:

Answer:

the movement of snail on the ground is in random motion.

the strings of the guitar is in oscillatory motion.

the whirling of stone tied with a thread is in circular motion.

Answer:

25%

Explanation:

Answer:

Explanation: 6000z

Answer:

115.05 Volts

Explanation:

We can use Ohm's Law!

V=IR

V= 1.77 * 65

V=115.05 Volts

Answer:

English is the language

Answer: im most likely wrong but i think its A

Explanation:

The value of the current in each arm of the circuit is given by Kirchhoff's

Rules.

Reasons:

By Kirchhoff's junction rule, we have that the sum of current at a junction is given as follows;

Which by the direction of the currents in the given circuit diagram, we have;

Therefore;

I₁ = I₃ + I₂

According to Kirchhoff's loop rule theory, we have;

In the loop having the 2 Volts emf., we have;

-I₃·R₁ + 2 + I₂·R₂ = 0

I₃ = 1.17 A

R₁ = 2 Ω

R₂ = 2 Ω

Which gives;

-1.17 × 2 + 2 + I₂×2 = 0

I₂ × 2 = 2.34 - 2 = 0.34

I₂ = 0.34 ÷ 2 = 0.17

I₂ = 0.17 A

From the loop having the 7 Volts emf. we have;

7 - 0.17×2 - I₁ × 4 - I₁ × 1 = 0

Which gives;

7 - 0.34 - 5·I₁ = 0

5·I₁ = 7 - 0.34 = 6.66

I₁ = 6.66 ÷ 5 = 1.332

Therefore;

Learn more about electric circuits here:

https://brainly.com/question/2608877