This question is describing two chemical equations whereby the concentration of ammonia has to be determined. The first reaction is between 25.00 mL of ammonia and 50.00 mL of 0.100-M HCl whose excess was neutralized with 21.50 mL of 0.050-M Na₂CO₃ and thus, the concentration ammonia in the cloudy solution was determined as 0.114 M.
First of all we need to go over the titration of the excess HCl with Na₂CO₃ by writing the chemical equation it takes place when they react:
[tex]2HCl+Na_2CO_3\rightarrow 2NaCl+CO_2+H_2O[/tex]
Whereas the mole ratio of HCl to Na₂CO₃ is 2:1 and the volume of the HCl leftover is determined as follows:
[tex]V_{HCl}^{leftover}=\frac{2*0.050M*21.50mL}{0.100M} =21.5mL[/tex]
Next, we infer that the consumed volume of HCl by the ammonia solution was:
[tex]V_{HCl}^{consumed}=50.00mL-21.50mL=28.5 mL[/tex]
Then, we write the chemical equation that takes place between ammonia and HCl:
[tex]HCl+NH_3\rightarrow NH_4Cl[/tex]
Whereas the mole ratio is now 1:1, which means that the concentration of ammonia was:
[tex]M_{NH_3}=\frac{28.5mL*0.100M}{25.00mL}\\\\ M_{NH_3}=0.114M[/tex]
Learn more:
(Titration) https://brainly.com/question/15687419(Titration) https://brainly.com/question/253282861) Convert the following:
900g to kg
2.87L to uL
Answer:
0.9 kg
2870000 uL
there is a conversion calculator online
Which of the following could be classified as unleavened bread?
sourdough bread
muffins
tortilla
bagels
Answer:
Tortilla
Explanation:
Answer:
tortilla
Explanation:
How many electrons does chlorine need to gain in order to be like Argon ?
- 2 electrons
- 3 electrons
- 1 electron
Which element on the periodic table is the lowest mass in period 4??
Answer:
potassium I believe is the correct answer
Explanation:
Potassium is the period four element with the lowest mass; its average mass is 39.0983amu.
The fourth period of the periodic table is where potassium has its lowest atomic mass.
What is atomic mass?Atomic mass is defined as the combined mass of an atom's protons, neutrons, and electrons. The term "atomic mass" refers to the weight of an atom or molecule. To determine the average mass of elements and molecules as well as to resolve stoichiometry issues, the atomic mass is used.
An electrically neutral atom has an equal number of protons and electrons. As a result, using any of the two formulas, we may calculate the atomic mass of an element. The atomic mass of an element grows as we move from left to right in a period of the periodic table. In the fourth period of the current periodic table, Krypton has the highest atomic mass and potassium has the lowest.
Thus, the fourth period of the periodic table is where potassium has its lowest atomic mass.
To learn more about atomic mass, refer to the link below:
https://brainly.com/question/17067547
#SPJ2
calculate the number of molecules in 4.48dm3 of hydrogen at STP
Answer: 1 more of hydrogen =22.4dm3
X moles of hydrogen =4.48dm3
22.4dm3x = 4.48dm3
4.48dm3\22.4dm3
X=0.2 moles
Explanation: 1 volume of hydrogen at STP is 22.4dm3
Y’all what’s this I don’t feel like doing it and I’ll give brainlist too
Answer:
2.Closed System: A closed system is a thermodynamic system where energy can be exchanged with its surrounding but not matter. Open System: Open systems can exchange matter with the surrounding. Closed System: Closed systems cannot exchange matter with the surrounding. Open System: The mass of the system will vary with time in open systems.
Explanation:
1.The particle model is the name for the diagrams used to draw solids, liquids and gases. In the model, the particles are shown as circles or spheres. However, the particles in ice, liquid water and steam look the same because they are all water, but in different states of matter. Why do we use the particle model in science?
3.An open system can be defined as a system which can exchange both matter and energy with the surrounding. For example, the earth can be recognized as an open system. In this case, the earth is the system, and space is the surrounding. Sunlight can reach the earth surface and we can send rockets to space.
what is the wavelength of a photon emitted when an electron jumps from n=2 to n= 1 energy level of a single ionized helium atom ?
Answer:
I hope it help you the wavelength is 1.9130E-28
Which property is the same for a 50 mL sample of liquid water and a 100 mL sample of liquid water?
Answer: The density because it stays the same with any same liquids or solids or gas with whatever amount of it is added. It only changes if the matter of state is different or there is any environmental change.
What quantity of energy is required to heat a piece of iron wighing 1.31 g from 25.0 degrees celsius to 46.0 degrees celsius
The quantity of energy required to heat a piece of iron weighing 1.31 g from 25.0 degrees Celsius to 46.0 degrees Celsius is 2.93 calories.
What is energy?The ability or power to perform tasks, such as the ability to move an object (having a certain mass) by exerting force.
Energy can exist in many forms, including electrical, mechanical, chemical, thermal, and nuclear, and it can also change its form.
The equation q = mcT, where m is the sample mass, c is the specific heat, and T is the temperature change, can be used to determine the amount of heat acquired or lost by a sample (q).
Q = mcΔT
Q = 1.31 g x 449 x 21° C = 12.26 joule
12.26 /1 x 1 cal / 4.189= 2.93 calories
Therefore, the quantity of energy required to heat a piece of iron is 2.93 cal.
To learn more about energy, refer to the link:
https://brainly.com/question/22920370
#SPJ2
Heart, 5 stars, and Brainiest to first right answer!
Which layer of the atmosphere reflects radio waves back to Earth?
A. Mesosphere
B. Stratosphere
C. Thermosphere
D. Troposphere
Answer:
Thermosphere
Explanation:
More specifically the ionosphere, since the ionosphere is the lower part of the thermosphere.
Hope this helps!
Check the box under each molecule in the table below that is an isomer of this molecule:
The branched alkanes in boxes two and three all have molecular formula C6H14 and are isomers of the compound shown.
Isomers are compounds that has the same molecular formula but different structural formulas. Hence, isomers of compounds can be represented by the same molecular formula since they contain the same number of each atom.
The molecule shown has molecular formula C6H14. The branched alkanes in boxes two and three all have molecular formula C6H14 and are isomers of the compound shown.
Learn more about isomers: https://brainly.com/question/1558338
Sound travels from a phone speaker to the ear of the person listening to the call. Sound waves are modeled by the image below. 1) What do the dots in the image represent? 2) How do sound waves travel through air to a person’s ear?
Answer:
Remember the black and red dots represented in the below animation are not molecules. They are just markers enabling us to visualize the local displacement of air particles and so, the rise and fall of pressure within the wave medium.
The air is made up of many tiny particles. When sound is created, the air particles vibrate and collide with each other, causing the vibrations to pass between air particles. The vibrating particles pass the sound through to a person's ear and vibrate the ear drum. Light travels much faster than sound through air.
Explanation:
PLEASE HELP ME!!
The molar mass of BF3 is 67.81 g/mol. How many molecules of BF3 are there in 2 g? (1 point)
A) 1.776 x 1022
B) 8.881 x 1021
C) 1.204 x 1024
D) 4.084 x 1025
Answer:
A
Explanation:
We are given that the molar mass of boron triflouride BF₃ is 67.81 g/mol. We want to determine the number of molecules of BF₃ in 2 g of BF₃.
Recall that there are 6.02 × 10²³ molecules in any mole of a substance. In other words, there are 6.02 × 10²³ BF₃ molecules in a mole of BF₃. Starting with the initial value, multiply:
[tex]\displaystyle \begin{aligned} 2\text{ g BF$_3$}&\cdot \frac{1\text{ mol BF$_3$}}{67.81 \text{ g BF$_3$}} \cdot \frac{6.02\times 10^{23} \text{ molecules BF$_3$}}{1 \text{ mol BF$_3$}} \\ \\ &= 1.776 \times 10^{22} \text{ molecules BF$_3$}\end{aligned}[/tex]
Hence, our answer is A.
*Perhaps it rendered the values incorrectly, but since we started with only 2 g of BF₃, our resulting calculation should only contain one significant digit. Hence, the correct answer should be 2 × 10²² molecules of BF₃.
The molecules of BF₃ that are there in 2 g is 1.776 × 10²² molecules and the correct option is option A.
The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.
A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.
Given,
Molar mass of BF₃ = 67.81 g/mol
Mass = 2g
Moles = mass / molar mass
= 2 / 67.81
= 0.029 moles
1 mole = 6.023 × 10²³
0.029 moles = 6.023 × 10²³ × 0.029
= 1.776 × 10²² molecules
Thus, the ideal selection is option A.
Learn more about Moles, here:
https://brainly.com/question/15209553
#SPJ6
( picture ) identify each type of reaction shown below
it wouldnt let me type it because it said it was too inappropriate
Explanation:
Why must labs that use mercury thermometers calculate Kelvin ?
Answer:
because those are the only thermometers that are truly accurate for kelvins
Explanation:
The Kelvin temperature in thermometers is used by scientists because it provides a temperature where zero indicates the complete absence of thermal energy.
What is the Kelvin scale?All thermometers have a scale on them that we use to find the temperature, known as a temperature scale. Kelvin proposed that the temperature interval from the ice point to the steam point be defined as 100° containing earlier centigrade scales.
Lord Kelvin had given an absolute temperature scale based on the Carnot cycle. The zero point is 273.15 on Kelvin’s scale below that of the Celsius scale.
On the kelvin scale, Each division is called a Kelvin (K) and is equal to a degree on the Celsius scale. On the Celsius scale, zero degrees is the freezing point of water while on the Kelvin scale the zero point is at absolute zero temperature.
Therefore, 0 K is equal to - 273.15°C, and 0°C is equal to 273.15 kelvins. A mathematical expression that gives the relation between the Celsius and Kelvin scales:
Temperature (K) = Temperature (°C) + 273
Learn more about Kelvin scale, here:
https://brainly.com/question/28938811
#SPJ2
How many moles does 205 g of helium,He, contain ?
Answer:
4.002602
Explanation:
Seems Am Converting Between Grams Helium And Mole.
What element makes up graphene
Write the symbol for every chemical element that has atomic number greater than 3 and atomic mass less than 15.4 u.
Answer:
N, B, Be, C
Explanation:
N (Nitrogen) has 14.0067 B (Boron) has 10.81 Be (Beryllium) has 9 and C (Carbon) has 12
The symbols for every chemical element that has atomic number greater than 3 and atomic mass less than 15.4 u are C, N, O, F, and Ne.
To find elements with atomic number greater than 3 and atomic mass less than 15.4 u, we'll consider the periodic table. Elements with atomic numbers 4 (Be) and higher meet the atomic number criterion. For the atomic mass, we'll look at elements with atomic masses below 15.4 u.
The chemical elements that fulfill both criteria are: Carbon (C) with atomic number 6 and atomic mass 12.01 u, Nitrogen (N) with atomic number 7 and atomic mass 14.01 u, Oxygen (O) with atomic number 8 and atomic mass 16.00 u, Fluorine (F) with atomic number 9 and atomic mass 18.99 u, and Neon (Ne) with atomic number 10 and atomic mass 20.18 u.
These elements meet the conditions of having atomic number greater than 3 and atomic mass less than 15.4 u. Therefore, the symbols for these elements are C, N, O, F, and Ne.
To learn more about atomic number here
https://brainly.com/question/31040816
#SPJ3
Answer choices are A. Constant speed
B. Stopped
C.Moving sideways
D.Accelerating
Pls help!
Describe ionic and covalent bonding.
Give an example of each
Answer:
Example of ionic bonds— Sodium chloride and calcium oxide. Example of covalent bond— Water, carbon
Explanation:
ionic bond, also called electrovalent bond, type of linkage formed from the electrostatic attraction between oppositely charged ions in a chemical compound. Such a bond forms when the valence (outermost) electrons of one atom are transferred permanently to another atom.
A covalent bond consists of the mutual sharing of one or more pairs of electrons between two atoms. These electrons are simultaneously attracted by the two atomic nuclei. A covalent bond forms when the difference between the electronegativities of two atoms is too small for an electron transfer to occur to form ions.
How could you distinguish a compound from a mixture
Answer:
Compound are substances which can be formed by chemically combining two or more elements. Mixtures are substances that are formed by physically mixing two or more substances.Which are the two key factors that affect the rate of weathering of rocks?
Select 2.
A Climate
B Rock Type
C Bedrock
Answer:
A and B.
Explanation:
Climate:
High temperatures and greater rainfall increase the rate of chemical weathering. Lower temperatures can break rocks to by freezing water inside of a rock cracks. When it freezes it expands the water and forces the crack of the rock to expand.
Rock Type:
Certain types of rock are very resistant to weathering. Igneous rocks, especially intrusive igneous rocks such as granite, weather slowly because it is hard for water to penetrate them. Other types of rock, such as limestone, are easily weathered because they dissolve in weak acids.
2.
The highest part of the wave is called the ____________.
Group of answer choices
A. best
B. crest
C. top
D. trough
Answer:
B. crest
Explanation:
The highest part of a wavelength is called the crest, meanwhile, the lowest part is the trough.
Answer:
b
Explanation:
it's highest because it have the most higher wave
Which of these is a characteristic of warm air?
It transfers energy through radiation.
Its molecules are far apart.
It sinks due to convection.
It cools the land below it.
Answer: B.
Explanation:
Warm air molecules are far apart, while cool air molecules are packed closer together.
Answer: A It Transfers energy through radiation
Explanation: I jut got done with the exam 15 min ago
Heart, 5 stars, and Brainiest to first right answer!
In an experiment, equal amounts of water and sand were heated under a lamp. The initial and final temperatures of each were recorded. A partial record of the temperature is shown.
Experimental RecordSubstance Initial Temperature Final Temperature
Sand 20 °C 26 °C
Water 20 °C ?
Which statement about the final temperature of water is correct?
A. It will be less than 26 °C as sand has a relatively higher specific heat than water.
B. It will be less than 26 °C as water has a relatively higher specific heat than sand.
C. It will be more than 26 °C as sand needs relatively higher energy than water to raise its temperature.
D. It will be more than 26 °C as water needs relatively higher energy than sand to raise its temperature.
hi have a nice day
will be less than 26 °C as water has a relatively higher specific heat than sand.
Explanation:
The specific heat of a substance is the amount of heat energy absorbed by one unit of mass of the substance when its temperature increases one unit.
From that, you can derive the equation for the specific heat of a substance:
specific heat = heat / (mass × ΔT)
Thus, assuming that all the heat provided by the lamp to both samples is the same and, as given, the amount (mass) of both samples is also the same, you have that the specific heat of the samples will be:
specific heat = constant / ΔT
So, specific heat and ΔT are inversely related.
It is known that water has a higher specific heat than sand (that is why the sand on the shore of a beach is, during the day, hotter than the water and your feet get burned when you walk on a sandy beach on a sunny day
A bottle rocket takes off with a speed of 13 m/s and is angled 55 degrees above the horizon. What is the Y component of the velocity ?
Answer:
10.53m/s
Explanation:
Initial velocity: 13m/s
Angle of projection: 55deg
Y-component of velocity is given as usin⌀
Plugging in, we get
= 13 * sin(55deg)
= 13 * 0.81
= 10.53
⇒ 10.53m/s
Alguien saber esto? Literal no se este material
Answer:
2. 389.15K , 3. 229.15K
Explanation:
K-273.15 = °C
At what stage of development are fish the most vulnerable?
Answer:
child stage.
Explanation:
they are more vubnlerabke at that stage
2 FeCl2
+ 13 KClO4
+ H2
SO4
→ 2 Fe(ClO3
)3
+
K2
SO4
+ 11 KClO3
+ H2
O
Calculate the grams of KClO3
arising from the
reaction of 2.50 g of KClO4
with 150 mg of FeCl2
in excess of H2
SO4
.
Taking into account the reaction stoichiometry and limiting reagent, 0.7977 grams of KClO₃ are formed from the reaction of 2.50 g of KClO₄ with 150 mg of FeCl₂ in excess of H₂SO₄.
In first place, the balanced reaction is:
2 FeCl₂ + 13 KClO₄ + H₂SO₄ → 2 Fe(ClO₃)₃ + K₂SO₄ + 11 KClO₃ + H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
FeCl₂: 2 molesKClO₄: 13 moles H₂SO₄: 1 moleFe(ClO₃)₃: 2 moles K₂SO₄: 1 mole KClO₃: 11 moles H₂O: 1 moleThe molar mass of the compounds is:
FeCl₂: 126.75 g/moleKClO₄: 138.55 g/mole H₂SO₄: 98 g/moleFe(ClO₃)₃: 306.2 g/moleK₂SO₄: 174.2 g/moleKClO₃: 122.55 g/moleH₂O: 18 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
FeCl₂: 2 moles× 126.75 g/mole= 253.5 gramsKClO₄: 13 moles× 138.55 g/mol= 1801.15 grams H₂SO₄: 1 mole× 98 g/mole= 98 gramsFe(ClO₃)₃: 2 moles× 306.2 g/mole= 612.4 gramsK₂SO₄: 1 mole× 174.2 g/mole= 174.2 gramsKClO₃: 11 moles× 122.55 g/mole= 1348.05 gramsH₂O: 1 mole× 18 g/mole= 18 grams
The limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.
To determine the limiting reagent, it is possible to use the reaction stoichiometry of the reaction and a simple rule of three as follows: if by stoichiometry 1801.15 grams of KClO₄ reacts with 253.5 grams of FeCl₂, if 2.50 grams of KClO₄ react how many mass of FeCl₂ will be needed?
[tex]mass of FeCl_{2}=\frac{2.50 grams of KClO_{4} x253.5 grams of FeCl_{2}}{1801.15 grams grams of KClO_{4}}[/tex]
mass of FeCl₂=0.35 grams
But 0.35 grams of FeCl₂ are not available, 150 mg= 0.150 grams (being 1000 mg= 1 grams) are available. Since you have less mass than you need to react with 1801.15 grams of KClO₄, FeCl₂ will be the limiting reagent.
Then the following rule of three can be applied: if by reaction stoichiometry 253.5 grams of FeCl₂ form 1348.05 grams of KClO₃, 0.150 grams of FeCl₂ form how much mass of KClO₃?
[tex]mass of KClO_{3}=\frac{0.150 grams of FeCl_{2}x1348.05 grams of KClO_{3} }{253.5grams of FeCl_{2} }[/tex]
mass of KClO₃= 0.7977 grams
Then, 0.7977 grams of KClO₃ are formed from the reaction of 2.50 g of KClO₄ with 150 mg of FeCl₂ in excess of H₂SO₄.
Learn more about reaction stoichiometry:
brainly.com/question/24741074 brainly.com/question/24653699 brainly.com/question/23871710Which list correctly compares how adding energy affects a substance during a phase change and not during a phase change?(1 point)
during a phase change: particles overcome forces of attraction and temperature stays the same
not during a phase change: particles become closer together
during a phase change: particles overcome forces of attraction and temperature stays the same
not during a phase change: temperature rises
during a phase change: particles overcome forces of attraction and temperature rises
not during a phase change: particles become closer together
during a phase change: particles overcome forces of attraction and temperature rises
not during a phase change: temperature rises
Which action happens at the microscopic scale as the temperature of a substance decreases and it eventually freezes?(1 point)
Particle motion decreases, and electrostatic forces pull particles closer together.
Particle motion increases, and the particles overcome electrostatic forces.
Particle motion decreases, and the particles overcome electrostatic forces.
Particle motion increases, and electrostatic forces pull particles closer together.
Which statement describes how a macroscopic property of gases provides information about microscopic gas particles?(1 point)
Gases fill their container, showing that gas particles are strongly attracted through electrostatic forces.
Gases have a fixed volume, showing that gas particles are strongly attracted through electrostatic forces.
Gases fill their container, showing that gas particles are not tied together and can move far apart.
Gases have a fixed volume, showing that gas particles are not tied together and can move far apart.
Answer:
1) during a phase change: particles overcome forces of attraction and temperature stays the same not during a phase change: temperature rises 2)Particle motion decreases, and electrostatic forces pull particles closer together.
3) Gases fill their container, showing that gas particles are not tied together and can move far apart.
Explanation: