The magnetic field strength is needed to generate a peak voltage 0.15 T.
The given parameters;
diameter of the coil, d = 18 cmradius of the coil, r = 9 cmnumber of turns, N = 120 turnsfrequency, f = 60 HzPeak voltage, E = 170 VThe area of the coil is calculated as follows;
[tex]A = \pi r^2\\\\A = \pi \times 0.09^2\\\\A = 0.0255 \ m^2[/tex]
The maximum emf induced in the coil is calculated as follows;
[tex]E_{max} = NBA \omega \\\\B = \frac{E_{max}}{NA\omega } \\\\[/tex]
where;
B is the magnetic field strengthω is the angular frequency = 2πf[tex]B = \frac{170 }{120 \times 0.025 \times 2\pi \times 60 } \\\\B = 0.15 \ T[/tex]
Thus, the magnetic field strength is needed to generate a peak voltage 0.15 T.
"Your question is not complete, it seems to be missing the following information";
An electric generator has an 18-cm-diameter, 120-turn coil that rotates at 60 hz in a uniform magnetic field that is perpendicular to the rotation axis.
What magnetic field strength is needed to generate a peak voltage of 170 V?
Learn more here:https://brainly.com/question/17238887
An irregularly shaped stone was lowered into a graduated cylinder holding a volume of water equal to 20L. The height of water rose to 30.2mL. If the mass of the stone was 25g what was its density?
Answer:
2.45 g/mL
Explanation:
(assuming that the original volume was 20 mL and not L)
Since you know the amount of water in the cylinder before and after you placed the rock in, you can subtract them to get the volume of the rock itself. [tex]30.2-20=10.2[/tex] mL.
To get the rock's density, use the equation [tex]d=\frac{m}{v}[/tex], where m is mass and v is volume.
[tex]d=\frac{25 g}{10.2mL}\\\\d=2.45 g/mL[/tex]
The launch speed of a projectile is three times the speed it has at its maximum height.what is the elevation angle at launch?
Answer:
Given: a projectile of initial launch velocity(V) and launch angle ∅ and no air resistance. At the maximum height, the projectile would have a zero contribution of speed from the vertical component(Vy) Therefore, if we say Vx=Vcos∅ is the only speed the projectile has at the instant of maximum height then we can replace Vx with 1/5V and write 1/5V=Vcos∅. Solving for the the launch angle ∅, gives Inverse Cos(1/5)=78.5 degrees.
Which type of solid is dry ice (solid carbon dioxide)? ionic atomic molecular none of the above.
Answer: molecular solid
Explanation:
1. When a 50,000 kg rocket blasts off there is a large force that acts on the rocket at the moment
of take off. In 0.137 seconds, the rocket suddenly has traveled 4.2 meters. What force from
the rocket engines caused the acceleration? (Hint: first find acceleration.)
Hi there!
We can begin by calculating the acceleration using the kinematic equation:
d = vit + 1/2at²
Since the rocket starts from rest, we can rewrite this as:
d = 1/2at²
Plug in given values:
4.2 = 1/2a(0.137²) ⇒ a = 447.55 m/s²
Now, we can use Newton's Second Law to find the appropriate force:
∑F = m · a
∑F = 50,000 · 447.55 = 22,377,500 N
If a powerful gravitational wave passed through you body, moving from your back to your chest, what would happen to your body
Answer:
If a powerful gravitational wave passed through you body, moving from your back to your chest, what would happen to your body? Your width and height would both oscillate in such a way that you would get taller as you got narrower and shorter as you got wider.
Explanation:
An example of a conversation killer is?
making eye contact.
encouraging another person
talking about others
sharing your ideas and feelings
Answer: talking about others
how many seconds does it take an object to fall 98m if it start from the rest .(using gravity 10m/s²?
Answer:
Neither.
Explanation:
After 10 seconds the object will have travelled 490.5m, not 98.1. The vertical distance covered in freefall by an object in time t is given by Distance= 1/2 x 9.81 x t^2. Simply multiplying 9.81 by the time will NOT give the distance covered.
The acceleration of the object will not change, it will always be 9.81 m/s^2. Its speed will keep increasing by 9.81 m/s every second, thats what the ‘per second squared*’ means. The speed after 10 seconds will be 98.1 m/s
To summarise, after 10 seconds, the object will have covered 490.5 metres, and it will have a final speed of 98.1 m/s. It’s acceleration will remain 9.81 m/s^2 at all times
How does the radius of a string affect centripetal force.
Answer:
because a raduis is half of 25% of a cicrle.
Explanation:
A crane lifts a 10000 N load through a distance of 30mins in 40s calculate work done
Given,
Force = 10,000 N
Distance = 30 m
Time = 40 s
Work done = force × distance
Work = 10,000 × 30
Work = 300,000 J
______
꧁✿ ᴿᴬᴵᴺᴮᴼᵂˢᴬᴸᵀ2222 ✬꧂
The work done on the object is equal to the power it experiences which is equal to 735 watts.
What is work done?Work done is defined as the product of force applied and the distance over which the force is applied on the object. Work is done on an object when a force is applied to an object and the object is moved through a particular distance.
The time rate of doing work is called as power, which is designated by the symbol P. It is measured in the units of watts, where one watt is equal to one joule energy applied per second time.
Work done on an object is equal to the force (F) multiplied by the distance d in the direction of the force. Where, time interval is Δt.
P = W/Δt = F × d/Δt = m × g × h/Δt = 100 × 9.8 × 30 / 40
Power = 735 watts
The power of the object is 735 watts.
Learn more about Work done here:
https://brainly.com/question/13662169
#SPJ2
how much force is required to accelerate a 12 kg mass at 5 m/s 2
Answer:
60 N
Explanation:
This is just Newton's Second Law
F = m*a
F = ?
m = 12 kg
a = 5 m/^2
F = 5*12 = 60 Newtons
The right to gather to advance some political or social cause is known as
Answer:
the first amendment
Explanation:
the first amendment to the United States constitution allows the freedoms concerning religion, expression, assembly, and the right to gather and petition.
Which of the following correctly describes the law of conservation of matter?
Group of answer choices
A.) Matter can only be created, but not destroyed in chemical equations
B.) Matter can neither be created nor destroyed during a chemical reaction
C.) Matter can be destroyed during a chemical reaction as long as it is created again in a different reaction
D.) Matter makes up 98% of stuff in the universe, so it has to be created and destroyed sometimes
Answer:
C
Explanation:
Tama Po yan don't worry
Estimate under what set of conditions it is possible, despite the spherical shape of the working electrode, to use linear diffusion equations to theoretically predict the current vs voltage curve expected in this experiment.
When the experimental measurements diverge at very low values of the voltages. When the ratio of current to saturated current is very small. That is, i/I less than or equal to 1/100. When there is a finite current at Voltage
V = 0
Diffusion will have influence on current - voltage curve in the working electrode which is ionization detector.
The estimation under set of conditions that is possible, despite the spherical shape of the working electrode, to use linear diffusion equations to theoretically predict the current vs voltage curve expected in this experiment will be:
When the experimental measurements diverge at very low values of the voltageswhen the ratio of current to saturated current is very small. That is, i/I less than or equal to 1/100When there is a finite current at Voltage V = 0Where
i = electric current
I = saturated current
V = voltage supplied
The curve expected will therefore give exponential curve from positive to negative domain because of the diffusion of ions from different directions
Learn more here: https://brainly.com/question/23985719
A transformer is being built to triple the voltage produced. Which data are collected to investigate whether the transformer can achieve the goal? (1 point)
A) the ratio of the number of turns in the primary and secondary coils
B) only the number of turns in the secondary coil and the magnetic field of the core
C) only the number of turns in the primary coil and the magnetic field of the core
D) the ratio of the number of turns in the primary and secondary coils and the magnetic field of the core
Answer:
the ratio of the number of turns in the primary and secondary coils.
Explanation:
hope i'm not too late!!
How can magnets attract and repeal without touching each other?
Answer:
The hyperactivity of these electrons give magnets the ability to attract and repel
A particle is constrained to move round a circle radius 382400km and makes a single revolution in 27.3 days. (i). Find the velocity in ms-1. (ii). Find its acceleration
The velocity and acceleration of the particle moving round the circle is;
Velocity = 162.12 m/s
Velocity = 162.12 m/sAcceleration = 6.873 × 10^(-5) m/s²
We are given;
Radius of circle; 382400 km = 382400000 m
Time; t = 27.3 days = 27.3 × 86400 s = 2358720 s
Now, formula for velocity is;
Velocity = distance/time
Thus;
I) velocity = 382400000/2358720
Velocity = 162.12 m/s
II) Acceleration is centripetal acceleration and is given by the formula;
a = v²/r
a = 162.12²/382400000
a = 6.873 × 10^(-5) m/s²
Read more at; https://brainly.com/question/12199398
consider the hypothetical observation irregular galaxies outside the local group are moving toward us. from part a, this observation would contradict the idea of an expanding universe. why?
Answer:
spiral galaxies move away from us 10% faster than elliptical galaxies at the same distances; irregular galaxies outside the Local Group are moving toward us; galaxy speeds are faster in summer than in winter
Explanation:
This may help I'm not sure.
Of the Three elements listed, which element is NOT present in the mixture?
Element D
Element A
Element Z
Answer:
element ammmkkkv was a very good
Alejandro Kirk is the catcher for the Blue Jays’ baseball team. He exerts a forward force on the 0.145-kg baseball to bring it to rest from a speed of 38.2 m/s. During the process, his hand recoils a distance of 0.135 m.
Determine is the acceleration of the ball.
Determine the force applied by Alejandro.
The kinematics and Newton's second law allow to find the results for the questions about the motion of the ball are:
The acceleration is: a = 5.4 10³ m / s² The force is: F = 7.84 10² N
Given parameters
Mass of the ball m = 0.145 kg Ball starts speed vo = 38.2 m / s Setback distance x = 0.135 mTo find
Acceleration The force
Kinematics studies the movement of bodies, looking for relationships between the position, speed and acceleration of bodies.
v² = v₀² - 2 ax
Wher vo es la initial veloicity, a the acceleration y x is the distance,
When the ball stops the velocity is zero.
0 = v₀² - 2ax
a = [tex]\frac{v_o^2}{2x}[/tex]
Let's calculate
a = [tex]\frac{38.2^2}{2 \ 0.135}[/tex]
a = 5.4 10³ m / s²
Newton's second law establishes a relationship between force, mass, and acceleration of the body.
F = ma
F = 0.145 5.4 10³
F = 7.84 10² N
In conclusion using kinematics and Newton's second law we can find the results for the questions about the motion of the ball are:
The acceleration is: a = 5.4 10³ m / s² The force is: F = 7.84 10² N
Learn more here: brainly.com/question/13536532
if the magntidude of the sum and difference of two non zero vectors A and B is equal. what can we say about the two vectors
Answer:
A + B = B - A
The above equation must hold for the sum and difference to be zero.
How can one of the vectors not be zero?????
when a mechanical wave travels through a medium, how does the wave affect the medium's particles?
thanks ;w;
Answer:
PLEASE MAARK ME BRAINLEST!!!
Explanation:
The particles of the medium just vibrate in place. As they vibrate, they pass the energy of the disturbance to the particles next to them, which pass the energy to the particles next to them, and so on.
A two-dimensional crystal has a rectangular unit cell, with spacings between the centers of the atoms of 0.5 nm in one direction (e.g., the x direction), and 0.4 nm in the other direction (e.g., the y direction). Presuming that the crystal has 1000 unit cells in each direction, sketch a representative portion of the reciprocal lattice on a scale drawing, showing the dimensions, units, and directions (i.e., kx and ky)
So directly the cell density value in a rectangle is:
[tex]5*10^{17} cells/cm^{2}[/tex]
In this exercise, we must first calculate the area of the rectangle, remembering that you need to convert from nm to cm is:
[tex]A=B*H\\A=(0.4*10^{-7})*(0.5*10^{-7})= 2*10^{-15}[/tex]
Next, let's calculate the density from the calculated area:
[tex]\frac{N}{A} = \frac{1000}{2*10^{-15} } = 5*10^{17}[/tex]
In this way, the calculation represents that there is:
[tex]5*10^{17} cells/cm^{2}[/tex]
Learn more: brainly.com/question/18320053
NO LINKS! What are the definitions of initial horizontal velocity and initial vertical velocity? Please help! This like is my 10th time asking this question because many people have been scamming me.
Explanation:
Initial horizontal velocity
If a projectile is launched at an angle to the horizontal, then the initial velocity of the projectile has both a horizontal and a vertical component. The horizontal velocity component (vx) describes the influence of the velocity in displacing the projectile horizontally.
The initial horizontal velocity can also be determined by measuring the diameter d of the ball and dividing by the time t that it takes for the ball to move across the photogate. That is Vo = d/t.
Initial vertical velocity
Vertical velocity refers to the speed of an object's movement in a vertical direction.The initial vertical velocity is the vertical component of the initial velocity: v 0 y = v 0 sin θ 0 = ( 30.0 m / s ) sin 45 ° = 21.2 m / s .
Help help fast please first answer gets brainiest also needs to be clearly stated
Which wave has the highest frequency?
Answer:its E
Explanation:
A man is sitting on a chair with wheels. He grabs a 2.1 kg book from the desk and throws
the book at a speed of 7.2 m/s. His chair moves backward. The man has a mass of 70 kg and
the chair has a mass of 9.2 kg. What is the speed of the man and the chair after the book is
thrown?
The speed of the man and the chair after the book is thrown is 0.2 m/s.
The given parameters:
mass of the book, m₁ = 2.1 kgspeed of the book, u₁ = 7.2 m/smass of the man, M = 70 kgmass of the book, m = 9.2 kgThe total mass of the man and the book is calculated as follows;
m₂ = 70 kg + 9.2 kg
m₂ = 79.2 kg
The speed of the man and the chair after the book is thrown is determined by applying the principle of conservation of linear momentum;
[tex]m_1 u_1 = m_2u_2\\\\u_2 = \frac{m_1u_1}{m_2} \\\\u_2 = \frac{2.1 \times 7.2}{79.2} \\\\u_2 = 0.2 \ m/s[/tex]
Thus, the speed of the man and the chair after the book is thrown is 0.2 m/s.
Learn more about conservation of linear momentum here: https://brainly.com/question/7538238
What happens when a red blood cell takes in helium
Answer:
It can cause death by asphyxiation in minutes or a gas/air embolism. This can cause the blood vessels to rupture and cause hemorrhage
Explanation:
Inhaling helium from a pure helium pressurized tank can cause something called an 'air embolism'. This is eventually a bubble that was trapped in a blood vessel, and therefor blocks it. The blood vessels can then rupture and hemorrhage.
Short answer: The results of breathing in 100% pure helium is asphyxiation, which eventually causes death.
I hope this helps! (If this was a question which had multiple choice answers, feel free to post them in the comment section and I would be more than happy to give you a direct answer to the test.)
why would a balloon attract your hair without touching it?
Answer:
Hold the balloon (negatively charged) just above your head so your hair (positively charged) will be attracted to it and stand up on end. ... The can will start to roll towards the balloon without touching it. The negatively charged balloon repels the electrons of the can so that a positive charge is near the balloon.
Explanation:
I gave my explanation along with the answer.
What are the advantages and/or disadvantages of the radiation that technology has had for the human economy?
A particular roller coaster has a mass of 3500 kg, a height of 4.0 m, and a velocity of 12 m/s. What is the kinetic energy? If needed, use g= 10. m/s^2
Explanation:
given
m=3500kg,h=4.0m,v=12m/s
ke=½mv²
½×3500×12²=3500×144÷2
=252,000j or 252j