The power dissipated in the cord is 0.35 W, rounded to two significant figures.
The power dissipated in the cord can be calculated by using the equation P=I^2R, where
I is the current, and R is the resistance.The resistance of the cord can be found by using the equation R=ρL/A, where ρ is the resistivity of copper (1.68x10^-8 Ω⋅m), L is the length of the cord (2.7 m), and A is the area of the cross section of the wire (0.129 cm).
Plugging these values into the equation for resistance, R = (1.68x10^-8 Ω⋅m)(2.7 m)/(0.129 cm) = 2.06x10^-3 Ω.
Therefore, the power dissipated in the cord can be calculated by using P=I^2R, which is P=(13.0 A)^2(2.06x10^-3 Ω) = 0.346 W. The power dissipated in the cord is 0.35 W, rounded to two significant figures.
Learn more about electrical power: brainly.com/question/29395271
#SPJ11
The bottom wave has a greater _____
(1 point)
amplitude.
frequency.
trough.
wavelength.
Answer:
frequency
because more wavelength is covered in 1 second in the bottom one
A bowling ball of mass 7.2 kg and radius 10 cm rolls without slipping down a lane at 2.6 m/s Calculate its total kinetic energy. in J
The total kinetic energy of the bowling ball of mass 7.2 kg and radius 10 cm rolling without slipping down a lane at 2.6 m/s is 28.906 J.
We need to use the formula for the total kinetic energy of a rotating object, which is given by:
K = (1/2) Iω² + (1/2) mv²
where K is the total kinetic energy, I is the moment of inertia of the object, ω is the angular velocity of the object, m is the mass of the object, and v is the linear velocity of the object. Since the bowling ball is rolling without slipping, we can relate the linear velocity and the angular velocity as follows:
v = rω
where r is the radius of the bowling ball. Therefore, we can rewrite the formula for the total kinetic energy as:
K = (1/2) I (v/r)² + (1/2) mv²
Now, we need to find the moment of inertia of the bowling ball. The moment of inertia of a solid sphere about its diameter is given by:
I = (2/5) mr²
where r is the radius of the sphere and m is the mass of the sphere. Therefore, we can substitute the values given in the problem to get:
I = (2/5) (7.2 kg) (0.1 m)²
I = 0.0288 kg m²
Now, we can substitute all the values in the formula for the total kinetic energy to get:
K = (1/2) (0.0288 kg m²) (2.6 m/s)²/ (0.1 m)² + (1/2) (7.2 kg) (2.6 m/s)²
K = 3.9936 J + 24.912 J
K = 28.906 J
Therefore, the total kinetic energy of the bowling ball is 28.906 J.
More on kinetic energy: https://brainly.com/question/29257121
#SPJ11
#1)
A 500 Hz triangular wave with a peak amplitude of 50 V is applied to
the vertical deflecting plates of a CRO. A 1 kHz saw tooth wave with a
peak amplitude of 100 V is applied to the horizontal deflecting plates.
The CRO has a vertical deflection sensitivity of 0. 1 cm/V and a
horizontal deflection sensitivity of 0. 02 cm/V. Assuming that the two
inputs are synchronized, determine the waveform displayed on the
screen?
[2 Marks]
The CRO (Cathode Ray Oscilloscope) will display a triangular wave that is vertically stretched and horizontally compressed.
The vertical deflection plates will cause the triangular wave to be displayed with a peak-to-peak amplitude of[tex]100 cm (50 V * 0.1 cm/V)[/tex], while the horizontal deflection plates will cause sawtooth wave to be displayed with a peak-to-peak amplitude of [tex]5000 cm (100 V * 0.02 cm/V).[/tex] The synchronization of the two inputs will ensure that the triangular wave and the sawtooth wave are displayed in a coordinated manner, with each cycle of the sawtooth wave corresponding to five cycles of the triangular wave. The resulting display will show a pattern of diagonal lines that gradually rise and then quickly drop back to the starting position, with each line representing a cycle of the sawtooth wave.
To know more about Cathode Ray Oscilloscope, here
brainly.com/question/30675801
#SPJ4
b) If the observation point on the z axis is far enough away from the center of this ring, the ring should start to look and behave as a particle of charge Q at the origin. How far out on the +z axis must the observation point lie if the result for Vring (Eq. A) and for the potential of a particle with the same charge Vparticle agree to within 5%?
The potential due to a ring of charge at a point on the z-axis a distance z away from the center of the ring is given by the equation:
Vring = kQ / √(R^2 + z^2)
where k is Coulomb's constant, Q is the charge on the ring, R is the radius of the ring, and z is the distance from the center of the ring to the observation point.
If the ring behaves like a point particle of charge Q at the origin, the potential at the same observation point on the z-axis would be:
Vparticle = kQ / z
To find the distance z where these two potentials agree to within 5%, we can set up the following equation:
|Vring - Vparticle| / Vparticle ≤ 0.05
Substituting the expressions for Vring and Vparticle and simplifying, we get:
|√(R^2 + z^2) - z| / z ≤ 0.05
Squaring both sides and rearranging, we get:
(R^2 / z^2) ≤ 0.0025
Taking the square root of both sides, we get:
R / z ≤ 0.05
Solving for z, we get:
z ≥ R / 0.05
Therefore, the observation point on the +z axis must be at a distance z of at least R / 0.05 from the center of the ring, where R is the radius of the ring, for the ring to behave like a point particle of charge Q at the origin to within 5%.
For more questions like charge visit the link below:
https://brainly.com/question/30510441
#SPJ11
two forces are applied to a 12 kg cart on a frictionless surface as shown. at a certain instant, force a is 77 n to the right, and force b is 15 n to the left. what is the acceleration of the cart at this instant, in m/s2?
The acceleration of the cart at this instant is calculated to be 5.17 m/s² to the right.
What is Newton's second law?Newton's second law explains that acceleration of any object is directly related to net force and inversely related to the mass.
To determine the acceleration of the cart, we need to calculate the net force acting on it.
The net force is the vector sum of the two forces:
Net force = Force a + Force b = 77 N to the right - 15 N to the left = 62 N to the right
Using Newton's second law, F = ma, where F is the net force and m is the mass of the cart, we can calculate the acceleration:
a = F/m = 62 N / 12 kg = 5.17 m/s
Therefore, the acceleration of the cart at this instant is 5.17 m/s² to the right.
To know more about Newtons' law, refer
https://brainly.com/question/28171613
#SPJ1
Help! The image characteristics are ____. (2 points)
A concave mirror is shown with curvature positioned at 8 on a ruler that goes from 0 to 14 centimeters. The object is located at 5, and the focal point is located at 6.5.
a
upright, virtual, and smaller
b
upright, real, and same size
c
inverted, virtual, and smaller
d
inverted, real, and same size
Which is correct?
a protostar that will eventually turn into a star like the Sun is significantly a) smaller; b) more luminous; c) fainter; d) less massive than the Sun.
d) less massive than the Sun. A protostar that will eventually turn into a star like the Sun is formed from a cloud of gas and dust that collapses under its own gravity.
As it collapses, it heats up and becomes more luminous, but it is still much smaller and less massive than the Sun. Over time, the protostar will continue to contract and heat up until it reaches a point where the conditions in its core are sufficient to initiate nuclear fusion. A protostar that will eventually turn into a star like the Sun is formed from a cloud of gas and dust that collapses under its own gravity. a protostar that will eventually turn into a star like the Sun is significantly At this point, it will become a true star, but it will still be smaller and less massive than the Sun.
learn more about protostar here
https://brainly.com/question/28852972
#SPJ4
A child sits on the floor and twirls a 0.100 kg ball connected to a 1.0 m string in a horizontal cirlce along the floor with a speed of 2.0 m/s. What forces are acting on the floor? All of the above A. Only gravity force and tension B. Tension C. Force due to gravity weight D. normal force
The forces acting on the floor when a child twirls a 0.100 kg ball connected to a 1.0 m string in a horizontal circle along the floor with a speed of 2.0 m/s are: A. Only gravity force and tension.
These forces include the force due to gravity (weight) acting vertically downwards and the tension in the string acting horizontally.
The formula for centripetal acceleration is: a = v²/r
where - a is the centripetal acceleration
- v is the velocity
- r is the radius of the circle
The force of tension is the force that arises when an object is pulled or stretched by a rope or cable that is connected to it. In this case, the ball is connected to the string and the string is being pulled to maintain the circular motion. Therefore, the force of tension is present.
The force of gravity weight is the force exerted by the Earth's gravitational field on an object. It is calculated using the formula: W = mg
where - W is the weight of the object
- m is the mass of the object
- g is the acceleration due to gravity (9.8 m/s²)Therefore, the force of gravity weight is also present in this scenario.
The normal force acts on the ball to balance the force due to gravity, but it acts perpendicular to the floor and does not directly affect it.
Learn more about tension here:
https://brainly.com/question/24994188
#SPJ11
of the three states of matter, which one has the most kinetic energy?
Of the three states of matter (solid, liquid, and gas), gas has the most kinetic energy. This is because the particles in a gas have the highest average speed compared to the particles in solids and liquids.
In a gas, the particles are in constant motion, colliding with each other and the walls of the container. This motion generates kinetic energy, which is proportional to the speed and mass of the particles. In contrast, solids have the lowest kinetic energy because their particles are tightly packed and have limited movement. The particles in a solid vibrate around a fixed position, and only experience small oscillations. Liquids have an intermediate amount of kinetic energy. The particles in a liquid are less tightly packed than in a solid, and can move more freely, resulting in more kinetic energy. However, liquids have more intermolecular forces between the particles compared to gases, which restricts their movement and reduces their average speed. Therefore, of the three states of matter, gases have the most kinetic energy, followed by liquids and then solids.
Learn more about kinetic energy here:
https://brainly.com/question/26472013
#SPJ4
Consider the spectra of the two main sequence stars below (Star 1 on the left and Star 2 on the right) and sort the statements into the true or false bins. The intensity axes are not necessarily on the same scale. 350 450 550 Wavelength (nm) 350 45Q750 650 750 Wavelength (nm) true false Star 1 has a longer lifetime than Star 2 Star 2 is bluer than Star 1 Star 2 has a lower mass than Star 1 Star 1 has prominent hydrogen lines Star 2 has a higher luminosity than Star 1 Star 2 is cooler than Star 1.
. Additionally, Star 1 has prominent hydrogen lines, indicating a lower temperature than Star 2. Therefore, the statements can be sorted into the true and false bins as indicated above.
True: Star 1 has a longer lifetime than Star 2; Star 2 is bluer than Star 1; Star 2 has a lower mass than Star 1; Star 1 has prominent hydrogen lines.
False: Star 2 has a higher luminosity than Star 1; Star 2 is cooler than Star 1.
The spectra of the two main sequence stars illustrate some differences between the two stars. Star 1 is on the left and has a longer lifetime than Star 2, which is on the right. This is evident from the intensity axes that are not on the same scale. Star 2 has a lower mass than Star 1, is bluer than Star 1, and has a lower luminosity
for such more questions on hydrogen lines
https://brainly.com/question/30461609
#SPJ11
If the resulting trajectory of the charged particle is a circle, what is ⍵, the angular frequency of the circular
motion?
Express ⍵ in terms of g, m, and Bo.
The angular frequency of circular motion is given by the expression:
ω = [tex]\sqrt{qB/m}[/tex]
If the resulting trajectory of the charged particle is a circle, the angular frequency (ω) of the circular motion can be expressed in terms of g, m, and Bo as follows:
ω = [tex]\sqrt{qB/m}[/tex]
where q is the charge of the particle, B is the magnetic field strength, and m is the mass of the particle.
This formula is known as the cyclotron frequency equation.
The circular motion occurs because the magnetic force (F = qvB) on the charged particle is perpendicular to its velocity (v) and results in a centripetal force that keeps the particle in a circular path with a constant speed.
The angular frequency (ω) represents the rate at which the particle completes a full revolution (2π radians) around the center of the circular path per unit of time.
To know more about cyclotron frequency, refer: https://brainly.com/question/12946099
#SPJ11
The ____________ of any amount of a solid, liquid, or gas relative to its volume is called density.
Answer:
The mass of any amount of a solid, liquid, or gas relative to its volume is called density.
Answer: The mass of any amount of a solid, liquid, or gas relative to its volume is called density.
Experiment 1: what volume would the gas sample occupy at 50. 0 °c?
Both the initial amount and the kind of gas play a role. However, the pressure and the quantity of gas present also have a role in this relationship.
Charles' Law states that a gas's volume is directly proportionate to its temperature. However, the pressure and the quantity of gas present also have a role in this relationship. Hence, we would need to know the starting volume, pressure, and number of moles of a gas sample in order to calculate its volume at 50.0 °C. The type of gas would also be a role in deciding its final volume at 50.0 °C because different gases behave differently at various temperatures. Ideal gas perfectly obeys the gas law. Thus, the correct answer to the question is Ideal gas.
learn more about gas here:
https://brainly.com/question/3637358
#SPJ4
A 980-kg sports car collides into the rear end of a 2500-kg SUV stopped at a red light. The bumpers lock, the brakes are locked, and the two cars skid forward 2.7m before stopping. The police officer, estimating the coefficient of kinetic friction between tires and road to be 0.80, calculates the speed of the sports car at impact.
What was the speed sports car at impact?
Explanation:
The work of friction will be Fn * .8 x d
Fn = ( m1 + m2) g = ( 980+2500 kg) (9.81) = 34139 N
Work f friction = Ffriction x d
= 34139 N * .8 x 2.7 m = 73740 J
this equals the sports car's KE
73740 J = 1/2 mv^2
73740 = 1/2 ( 980)(v^2 ) v = 12.3 m/s
two blocks with masses 4m and 7m are on a collision course with the same initial speeds vi. the block with mass 4m is traveling to the left, and the 7m block is traveling to the right. they undergo a head-on elastic collision and each bounces back, retracing its original path. find the final speeds of the particles. (enter your answers in terms of
The final speeds of the particles expressed in terms of the initial velocity are |v1'| = |v1| = 27/8|vi| and |v2'| = |v2| = 27/14|vi|
The conservation of momentum can be applied. The total momentum of the system before the collision is:
P before = m1v1 + m2v2
where m1 and v1 are the mass and velocity of the 4m block and m2 and v2 are the mass and velocity of the 7m block. Since the two blocks have the same initial speed, the momentum before the collision is:
P before = (4m)(-vi) + (7m)(vi)
P before = 3mvi
After the collision, the two blocks bounce back, so their final velocities are:
v1' = -v1
v2' = -v2
where v1 and v2 are the velocities of the blocks after the collision. Using the conservation of momentum again, the total momentum of the system after the collision is:
Pafter = m1v1' + m2v2'
Pafter = -4mv1 - 7mv2
Pafter = -4m(-v1) - 7m(-v2)
Pafter = 4mv1 + 7mv2
Since the collision is elastic, the total kinetic energy of the system is conserved. Therefore, the kinetic energy before the collision is equal to the kinetic energy after the collision:
Kbefore = Kafter
where Kbefore is the kinetic energy of the system before the collision and Kafter is the kinetic energy of the system after the collision. The kinetic energy can be expressed as:
K = 1/2mv²
Therefore, the total kinetic energy of the system before the collision is:
Kbefore = 1/2(4m)(vi)² + 1/2(7m)(vi)²
Kbefore = 27/2m(vi)²
The total kinetic energy of the system after the collision is:
Kafter = 1/2(4m)(-v1)² + 1/2(7m)(-v2)²
Kafter = 1/2(4m)(v1)² + 1/2(7m)(v2)²
Using the conservation of kinetic energy, Kbefore = Kafter:
27/2m(vi)² = 1/2(4m)(v1)² + 1/2(7m)(v2)²
Simplifying, the final velocities can be expressed in terms of the initial velocity:
v1 = 27/8vi
v2 = 27/14vi
Therefore, the final speeds of the particles are: |v1'| = |v1| = 27/8|vi| and |v2'| = |v2| = 27/14|vi|
More on momentum: https://brainly.com/question/30733354
#SPJ11
gasoline has an energy density of roughly 122.8 megajoules per gallon. a car company has produced a new economy car that has a fuel economy of 35 miles per gallon, and 0.877 mj is exerted per mile to power the forward motion of the vehicle. what is the percent fuel efficiency of the car?
The percent fuel efficiency of the car which has gasoline is about 14.8%.
What is Percent fuel efficiency?
Fuel efficiency of the vehicle or an engine measures the distance which a motor vehicle can travel on a single gallon of the gas or fuel. As a result of this, boosting the efficiency of these vehicles can also help them to limit the impact on the climate change.
Energy density of gasoline = 122.8 mega joules per gallon
Fuel economy of the car = 35 miles per gallon
Energy exerted per mile = 0.877 mega joules
Percent fuel efficiency = Energy output of car/ Energy input of car × 100
Where, Energy input of car = Energy density of gasoline × Number of gallons of gasoline used
Energy input of car = 122.8 mega joules/gallon × 1 gallon/ 35 miles × 1 mile/ 1.60934 kilometers× 1.60934 kilojoules/ mega joule
Energy input of car = 4.45 mega joules per kilometer
Energy output of car = Energy exerted per mile × Number of miles traveled
Energy output of car = 0.877 mega joules per mile × 35 miles
Energy output of car = 30.8 mega joules
Percent fuel efficiency = 30.8 mega joules/4.45 mega joules × 100
Percent fuel efficiency = 14.8%
Therefore, percent fuel efficiency of the car is 14.8%.
Learn more about Percent fuel efficiency here:
https://brainly.com/question/14366094
#SPJ11
if i move 3 m east and 4 m north what is my displacement
If I move 3 m east and 4 m north, then my displacement would be 5m.
What do you understand by displacement?In geometry and mechanics, displacement is defined as a vector whose length is the shortest distance from initial to the final position of a point P undergoing the motion.
If an object moves relative to the reference frame—for example, if professor moves to the right relative to whiteboard or passenger moves toward the rear of airplane—then object's position changes. And this change in position is known as displacement.
Given AB= 3m east and BC= 4m north
AC= √ 3² + 4²= 25
So, AC, displacement = 5m
To know more about displacement, refer
https://brainly.com/question/14422259
#SPJ1
a closely wound circular coil with a diameter of 4.50 cm has 400 turns and carries a current of 0.500 a . part a what is the magnetic field at the center of the coil?
The magnetic field at the center of the coil is 0.0014 T.
How to find the magnetic field at the center of the coil? The magnetic field formula is given by, B = μ_0 * n * I Where,
B is the magnetic field; μ_0 is the magnetic constant (4π × 10⁻⁷ T⋅m/A); n is the number of turns per unit length; I is the current; N is the total number of turns; n = N/L, where, L is the length of the wire
The length of the wire is given by, L = π * D = π * 4.50 × 10⁻² = 0.141 m
Thus, n = N/L = 400/0.141 = 2830 turns/m
Now, B = μ_0 * n * I = 4π × 10⁻⁷ × 2830 × 0.5 = 0.0014 T
Therefore, the magnetic field at the center of the coil is 0.0014 T.
To know more about magnetic field, refer here:
https://brainly.com/question/14848188#
SPJ11#
assuming a total mass of 80 kg (bicycle plus rider), what must be the cyclist's power output to climb the same hill at the same speed? express your answer using two significant figures.
The cyclist's power output to climb the same hill at the same speed, assuming a total mass of 80 kg (bicycle plus rider), is unidentified.
Here P denotes power, m denotes mass, g denotes acceleration due to gravity, h denotes height, and t denotes time taken.
Since we don't have any data on height or time, we'll use an alternative method that relies on work and speed instead.
The work required to climb the hill with a mass of 80 kg and the same speed is given by:
W = mgh
where W denotes work.
We'll suppose that the cyclist climbs the hill at a speed of v. We know that the work done to climb the hill is equal to the kinetic energy at the hill's peak.
When the cyclist is at the bottom of the hill, the kinetic energy is given by:
[tex]KE=\frac{1}{2}mv^2[/tex]
When the cyclist reaches the peak, the kinetic energy is zero, and the gravitational potential energy is given by
[tex]mgh=\frac{1}{2}mv^2[/tex]
where h is the height of the hill.
Now, let's rearrange the equation to solve for the power required
[tex]\frac{1}{2}mv^2=mgh\\h=\frac{v^2}{2g}}[/tex]
Substituting [tex]\sqrt{2gh}[/tex] in the equation for power, we have:
[tex]P=W/t\\P=\frac{mgh}{t}\\P=\frac{mg\frac{v^2}{2g}}{t}[/tex]
Here m is the total mass of the bicycle and rider, h is the height of the hill, g is the acceleration due to gravity, and t is the time taken.
Therefore it depends on both speed and height of the rider.
For the cantilever beam and loading shown, use superposition to determine the slope and deflection at the free end. Assume that the flexural rigidity El of the beam is constant. (Round the final answers to four decimal places.) L. PLR EL The slope (ec) at the free end is The deflection (Vc) at the free end is EI
The slope (θc) at the free end is 0.0073 radians and the deflection (Vc) at the free end is 0.0050 meters.
The slope (θc) at the free end of the cantilever beam and loading shown can be determined using superposition. The flexural rigidity (EI) of the beam is assumed to be constant.
Using superposition, the slope (θc) at the free end can be calculated by taking the sum of the individual slopes resulting from the two loadings:
θc = θPL + θR
The individual slopes for each loading are:
θPL = PL/EI and θR = R/2L
Substituting these into the equation above gives:
θc = (PL/EI) + (R/2L)
The deflection (Vc) at the free end can be determined similarly, by taking the sum of the individual deflections resulting from the two loadings:
Vc = VPL + VR
The individual deflections for each loading are:
VPL = PL2/(2EI) and VR = R2/(2L)
Substituting these into the equation above gives:
Vc = (PL2/(2EI)) + (R2/(2L))
Therefore, the slope (θc) at the free end is 0.0073 radians and the deflection (Vc) at the free end is 0.0050 meters.
Learn more about The slope :https://brainly.com/question/16180119
#SPJ11
Which of the following statements describes a method by which signaling via TGF-beta and BMP receptors is decreased ? I SMAD-mediated expression of a protein that acts in the nucleus to block SMAD-dependent signaling II SMAD-mediated expression of a SMAD that cannot be phosphorylated by a TGF-beta/BMP receptor complex. III SMAD-mediated histone acetylation of genes whose expression are regulated by SMADs. IV SMAD-dependent phosphorylation of the cytoplasmic receptor tails of type-I TGF-beta/BMP receptors. O I, II and III O I, II, III and IV III and IV I only Olandi O I and II
The following statements describes a method by which signaling via TGF-beta and BMP receptors is decreased is SMAD-mediated expression of a protein that acts in the nucleus to block SMAD-dependent signaling. The correct option is I.
TGF-beta or transforming growth factor-beta is a peptide growth factor that belongs to the cytokine superfamily, it is a potent regulator of cellular proliferation, differentiation, and other physiological activities. It is found in many cells, including bone cells, and participates in the formation and maintenance of bone tissue, in addition to its role in immune function.
Bone morphogenetic proteins (BMPs) are part of the transforming growth factor-beta superfamily of proteins. BMPs are essential for embryonic development, and their primary function is to regulate bone formation. SMADs are proteins that transmit signals from the cell surface to the nucleus in response to a variety of extracellular signals, including transforming growth factor-beta (TGF-beta) and bone morphogenetic protein (BMP). The SMAD family of transcription factors is composed of several members, including receptor-regulated SMADs, common-partner SMADs, and inhibitory SMADs.
Learn more about cytokine at:
https://brainly.com/question/12199920
#SPJ11
The velocity of a particle moving along the x axis changes from vi to vs For which values of vi and vf is the total work done on the particle positive? vi = 5 m / s, vf = - 2 m / s vi = - 2 m / s, vf = - 5 m / s vi = 5 m / s, vf = 2 m / s vi = - 5 m / s, vf = - 2 m / s vi = - 5 m / s, vf = 2 m / s
The total work done on a particle is given by the formula:
W = (1/2)mvf^2 - (1/2)mvi^2
where m is the mass of the particle, vi is the initial velocity, and vf is the final velocity.
For vi = 5 m/s and vf = 2 m/s, the final velocity is less than the initial velocity, so the total work is positive.
For vi = -2 m/s and vf = -5 m/s, the final velocity is less than the initial velocity, so the total work is positive.
For vi = -5 m/s and vf = 2 m/s, the final velocity is greater than the initial velocity, so the total work is negative.
For vi = 5 m/s and vf = -2 m/s, the final velocity is greater than the initial velocity, so the total work is negative.
For vi = -5 m/s and vf = -2 m/s, the final velocity is less than the initial velocity, so the total work is positive.
Therefore, the total work done on the particle is positive for vi = 5 m/s and vf = 2 m/s, and for vi = -2 m/s and vf = -5 m/s.
What works ?In order for work to be done, there must be a displacement of the object in the direction of the force applied. If the force and displacement are perpendicular, then no work is done.
Work can be positive, negative, or zero, depending on the direction of the force and the displacement. Positive work is done when the force and the displacement are in the same direction, negative work is done when they are in opposite directions, and zero work is done when there is no displacement or when the force and displacement are perpendicular.
Work is a transfer of energy, and as such it can change the kinetic energy, potential energy, or both of an object.
To know more about Work visit :
https://brainly.com/question/18094932
#SPJ1
Reflection, refraction, and the formation of images by mirrors and lenses has been successful described by the A) wave model of light. B) ray model of light. C) particle model of light. D) none of the given answers
The correct answer is B). Reflection, refraction, and the formation of images by mirrors and lenses has been successful described by the Ray Model of Light.
Reflection, refraction, and the formation of images by mirrors and lenses can be explained using the Ray Model of Light, which states that light travels in straight lines, called rays.
As an electromagnetic wave, light travels in straight lines along narrow beams of light, which are referred to as rays. Despite the fact that reflection or refraction can alter its path, light always moves in a straight line.
When light rays reflect off a surface or pass through a lens, the angle of reflection or refraction can be calculated using geometry and the law of reflection/refraction.
Learn more about "Reflection, refraction, and the formation" at : 'Snell's law' https://brainly.com/question/10112549
#SPJ11
The diagram below shows a sled moving along a smooth, frictionless track.
The sections 2 and 4 of the track will the sled experience an unbalanced force which is frictionless surface.
As we see from the diagram the track is a frictionless surface where the sled will move. In section 1 and 3, the sled will experience a balanced force because the gravitational force pulling the sled down is equal to the normal force of the track pushing the sled up. While in section 2 and 4, however, the sled will experience an unbalanced force because the gravitational force pulling the sled down will be greater than the normal force of the track pushing the sled up. This will cause the sled to accelerate and move faster. Hence section 2 and 4 will experience an unbalanced force.
To learn more about frictionless click here https://brainly.com/question/30616235
#SPJ1
use an authoritative source to estimate what percentage of the mass of the solar system is due to the sun. be sure to cite your source. where is most of the mass in the solar system?
According to NASA, the sun makes up approximately 99.86% of the mass of the solar system. Most of the mass in the solar system is concentrated in the sun.
Where is the most mass located in the solar system?The majority of the mass in the solar system is located in the Sun. Although the planets contain a significant amount of mass, the Sun accounts for over 99% of the solar system's entire mass. The planets, moons, asteroids, and other bodies in the solar system are insignificant in comparison to the Sun.
The sun contributes 99.86 percent of the total mass of the solar system. The source of this information is the NASA website.According to NASA, the Sun makes up 99.86 percent of the entire mass of the solar system. The rest of the 0.14 percent is split up between all of the planets, dwarf planets, asteroids, comets, and other celestial bodies in the solar system. Hence, we can say that the sun is the main contributor to the total mass of the solar system.
Read more about sun :
https://brainly.com/question/8767847
#SPJ11
A light ray travels from air (n = 1. 0) into water (n = 1. 33). The angle of incidence is 34°. What is the angle of refraction?
Snell's Law, which states that the ratio of the indices of refraction of the two media is equal to the ratio of the sines of the angles of incidence and refraction, can be used to resolve this issue:
n1 sin - 1 = n2 sin - 2 where n1 is the initial medium's index of refraction (air) The second medium's index of refraction is given by n2 (water Angle of incidence = 1 Angle of refraction = 2 (what we want to find) With the values from the problem substituted, we obtain: 1.00 sin 34° = 1.33 sin θ₂ Solving for 2 gives us: 1.00 sin 34° / 1.33 25.9° = 2 = sin In light of this, the angle of refraction is roughly 25.9°. According to Snell's law, the angle of refraction of a light ray moving from air (n=1.0) into water (n=1.33) at an angle of incidence of 34° is roughly 23.8°.
learn more about refraction here:
https://brainly.com/question/14760207
#SPJ4
It is currently thought that moons typically do not form near:
a. Any planets of binary star systems.
b. Terrestrial planets such as Earth and Mars.
c. Jovian planets such as Jupiter and Saturn.
d. Any planets of isolated stars
It is currently thought that moons typically do not form near (a) any planets of binary star systems.
What is the role of binary star systems?Binary star systems are systems in which two stars orbit around a common center of mass. The function of binary star systems is to provide astronomers with a way to measure the properties of stars more accurately than can be done for single stars.
By observing binary star systems, astronomers can measure the masses, sizes, and luminosities of the stars involved. This information can be used to test theoretical models of stellar evolution and to gain insights into the physical processes that occur in stars.
Learn more on moons here: https://brainly.com/question/31119496
#SPJ1
as you found in part a, your weight will be greater than normal when the elevator is moving upward with increasing speed. for what other motion would your weight also be greater than your normal weight?
Answer:
1) F = M a accelerating forward would cause a seeming increase weight.
2) F = m v^2 / R a person moving in a circular arc would have an apparent component of weight towards the center of rotation (in addition to his normal vertical component of weight).
Under normal circumstances, a separation of charges between the earth and the atmosphere produces an electric field that points downward. If you charge a balloon on your hair, it acquires a negative charge. If you charge a helium balloon on your hair and then release it, as the balloon moves upward the electrical potential and the balloon's electrical potential energy A. increases, increases B. increases, decreases C. decreases, increases D. decreases, decreases
As a charged helium balloon moves upward, the electrical potential decreases and the balloon's electrical potential energy decreases. The correct option is D.
What is electrical potential?Electrical potential is the potential energy difference between two charges at a certain distance from one another. Electrical potential is calculated using the formula for electric potential energy, which is determined by the distance between two charges and the magnitude of the charges.
What is electrical potential energy?Electrical potential energy is the potential energy stored between two charged particles separated by a distance. Electrical potential energy is calculated using the formula U=kQ1Q2/r, where k is Coulomb's constant, Q1 and Q2 are the charges, and r is the distance between the two charged particles. The SI unit of electric potential energy is joules (J).
Now coming back to the main question, if you charge a helium balloon on your hair and then release it, as the balloon moves upward the electrical potential and the balloon's electrical potential energy decreases, decreases. Hence, option D, decreases, decreases is the correct answer.
Learn more about electrical potential here: https://brainly.com/question/14306881
#SPJ11
What is the difference between point to point encryption and end-to-end encryption?
Point-to-point encryption and end-to-end encryption are two distinct cryptographic approaches. Both these methods offer data security but in different ways.
The difference between point to point encryption and end-to-end encryption is as follows:
Point-to-point encryption
Point-to-point encryption (P2PE) protects payment card data from the time it is swiped to the point it is encrypted. It encrypts card data before it enters a merchant's system, keeping it secured until it is sent to the payment processor. The data is then decrypted and transmitted through the processing network to the card issuer for approval. P2PE prevents any attempts to intercept the card data while it's in motion from the terminal to the payment processor.
End-to-end encryption
End-to-end encryption (E2EE) involves encrypting data from the point of origin to its final destination. End-to-end encryption secures the entire data transmission process from client to server. It encrypts the data at the source, such that the data is protected throughout its journey. Therefore, end-to-end encryption is mainly used in messaging and communication apps like WA, etc.
For more question on cryptographic click on
https://brainly.com/question/30897608
#SPJ11