an nacl solution is prepared by dissolving 90.0 g nacl in 250.0 g of water at 25°c. what is the vapor pressure of the solution if the vapor pressure of water at 25°c is 23.56 torr?
a. 21.21torr
b. 2.354 torr
c. 1.239 torr
d. 19.28 torr
e. 2.140 torr

A compound which has molar mass 123.22g/mol will have a molecular formula as ZrO₂. so the correct option is D..

To determine the molecular formula of a substance with a given molar mass, we need to know the empirical formula of the compound and the number of empirical formula units in the molecular formula.

Let's calculate the empirical formula weight for each of the options:

A) Co₂H₄:

Co: 2 x 58.93 = 117.86

H: 4 x 1.01 = 4.04

Total: 121.9 g/mol

B) PSF:

P: 1 x 30.97 = 30.97

S: 1 x 32.06 = 32.06

F: 1 x 18.99 = 18.99

Total: 82.02 g/mol

C) SrS₃:

Sr: 1 x 87.62 = 87.62

S: 3 x 32.06 = 96.18

Total: 183.8 g/mol

D) ZrO₂:

Zr: 1 x 91.22 = 91.22

O: 2 x 16.00 = 32.00

Total: 123.22 g/mol

Now we can divide the given molar mass by the empirical formula weight to find the number of empirical formula units in the molecular formula:

A) Co₂H₄: 123.22 / 121.9 = 1.01, so the molecular formula is approximately the same as the empirical formula, Co₂H₄.

B) PSF: 123.22 / 82.02 = 1.50, so the molecular formula is 1.5 times the empirical formula, which we can round to PS₃F₃.

C) SrS₃: 123.22 / 183.8 = 0.67, so the molecular formula is 0.67 times the empirical formula, which we can round to SrS₂.

D) ZrO₂: The molar mass is already equal to the empirical formula weight, so the molecular formula is the same as the empirical formula, ZrO₂.

Therefore, the molecular formula for the compound with a molar mass of 123.22 g/mol is D) ZrO₂.

Learn more about molecular formula here:

https://brainly.com/question/28647690

#SPJ4

To find the bond order of a molecule, subtract the number of bonding electrons from the number of anti-bonding electrons, and divide by 2.

The bond order is a measure of the strength and stability of a bond between two atoms in a molecule. It is calculated by determining the difference between the number of bonding electrons (those involved in forming a covalent bond) and anti-bonding electrons (those that weaken the bond) and dividing by 2.

The resulting number can range from zero to three, where higher bond orders indicate stronger and more stable bonds. A bond order of 0 indicates that the atoms do not form a bond, while a bond order of 1, 2, or 3 indicates a single, double, or triple bond, respectively. Bond order is an important concept in chemistry, as it helps predict the reactivity and behavior of molecules.

To know more about the bond order, here

brainly.com/question/12447843

#SPJ4

There are three prevailing exceptions to the octet rule: Molecules, such as NO, with an odd number of electrons; Molecules in which one or more atoms possess additionally than eight electrons, such as SF6.

Molecules such as BCl3, in which one or additional atoms possess less than eight electrons. General exceptions to the octet rule incorporate molecules that have an odd number of electrons and molecules in which one or more atoms possess more or fewer than eight electrons. Molecules with an odd number of electrons are somewhat rare in the s and p blocks but instead familiar among the d- and f- block elements. Compounds with more than an octet of electrons around an atom are named expanded-valence molecules.

To learn more about octet rule visit here:

https://brainly.com/question/1202688

#SPJ4

[tex]CHCl_{3}[/tex] is polar

Polar - A polar covalent link is created when atoms with different electronegativities share electrons to form a covalent bond. Polar bonding have a high melting point, low vapor pressure, high surface tension, and low boiling point. Polar chemicals interact with one another. On opposite ends of these molecules, there are positive and negative charges. They have electrical charge as a result. Examples include alcohol and Sulphur.

Chloroform has a tetrahedral molecular geometry, with the carbon atom at the center and the three chlorine atoms and one hydrogen atom located at the corners of the tetrahedron. The molecule has a dipole moment due to the unequal sharing of electrons between the carbon and chlorine atoms.

The chlorine atoms are more electronegative than the carbon atom, causing the electrons to be pulled closer to the chlorine atoms, which creates a partial negative charge. This results in the carbon atom having a partial positive charge. The polarity of the molecule makes it useful as a solvent for polar and nonpolar compounds.

know more about polar and non polar click here;

brainly.com/question/21727673

#SPJ4

Answer:

659.95 grams of NaCl are produced from 452.5 grams of NaOH when the reaction is complete.

Explanation:

To answer this question, we first need to calculate the number of moles of NaOH present in 452.5 grams of NaOH. We can use the molar mass of NaOH, which is 40.00 g/mol, to do this:

Moles of NaOH = Mass of NaOH / Molar mass of NaOH

Moles of NaOH = 452.5 g / 40.00 g/mol

Moles of NaOH = 11.31 mol

Now we can use the balanced chemical equation to determine the number of moles of NaCl produced when 11.31 moles of NaOH react:

NaOH + BaCl2 → NaCl + Ba(OH)2

According to the equation, 1 mole of NaOH produces 1 mole of NaCl. Therefore, 11.31 moles of NaOH will produce 11.31 moles of NaCl.

Finally, we can convert the number of moles of NaCl to grams using the molar mass of NaCl, which is 58.44 g/mol:

Mass of NaCl = Moles of NaCl x Molar mass of NaCl

Mass of NaCl = 11.31 mol x 58.44 g/mol

Mass of NaCl = 659.95 g

The moles that are needed to completely react with 18. 7 moles of hydrofluoric acid are 9.35 moles.

To determine the number of moles of calcium hydroxide needed to completely react with 18.7 moles of hydrofluoric acid, we need to first write a balanced chemical equation for the reaction. The balanced equation is:  

Ca(OH)₂ + 2HF → CaF₂ + 2H₂O

From the balanced equation, we can see that 1 mole of calcium hydroxide reacts with 2 moles of hydrofluoric acid.

The number of moles of calcium hydroxide needed to react with 18.7 moles of hydrofluoric acid can be calculated as follows:  

moles of calcium hydroxide = (moles of hydrofluoric acid) / 2

moles of calcium hydroxide= 18.7 / 2= 9.35 moles

So, 9.35 moles of calcium hydroxide are needed to completely react with 18.7 moles of hydrofluoric acid.

Learn more about balanced chemical equation here https://brainly.com/question/1427235

#SPJ11

According to the ideal gas equation, the volume of acetylene produced at 26 degrees Celsius and 0.9 atm from 0.05 CaC₂ and excess H₂O is 138.10 liters.

The ideal gas equation is an equation which is applicable in a hypothetical state of an ideal gas.It is a combination of various laws such as  Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law . It is given as, PV=nRT where R= gas constant whose value is 8.314.The law has several limitations.

On substitution of values, V= 0.05×8.314×299/0.9= 138.10 liters.

Thus, the volume of acetylene produced at 26 degrees Celsius and 0.9 atm from 0.05 CaC₂ and excess H₂O is 138.10 liters.

Learn more about ideal gas equation,here:

https://brainly.com/question/28837405

#SPJ9

The solution to this question is option d. We can calculate it in this manner:

By using Raoult's Law:

Pi= Pi* Xi

Moles H20= (200g of H2O x 1 mol)/ 18.02 g of H20

                     =11.0987 mol H2O

Moles of NaCl= (50g of NaCl x 1 mol)/ 58.4427 mol NaCl

Now to calculate vapor pressure,

Mole fraction of H20= (Moles of H20)/ (Moles H20 + Moles of NaCl)

                                 = 11.0987/ 11.95414

                                 =0.92844

Partial pressure of solution is,

Pi= 0.92844 x 0.031

  =0.2878 atm

Therefore vapor pressure of the solution is 0.2878 atm

Learn more about vapor pressure here brainly.com/question/11864750

#SPJ4

The hydrogen cyanide (HCN) lewis structure has a triple bond between the carbon (C) and nitrogen (N) atoms, with the hydrogen (H) attached to the carbon.║

Hydrogen cyanide is a polar molecule due to the unequal sharing of electrons between the C and N atoms. The C atom pulls the electrons more strongly, giving it a slight negative charge, while the H atom has a slight positive charge.

This polarity allows hydrogen cyanide to form hydrogen bonds with other polar molecules, making it a useful solvent and a building block for organic chemistry. However, hydrogen cyanide is also a highly toxic gas and can cause severe health effects if inhaled or ingested.

To know more about the lewis structure, here

brainly.com/question/20300458

#SPJ4

To convert from molecules/atoms to moles, divide by Avogadro's Number:

[tex]6.02*10^{23}[/tex]

We're given:

Divide by Avogadro's Number:

[tex]\dfrac{3.2*10^{24}}{6.02*10^{23}}[/tex]

[tex]= 5.3[/tex]

B. 5.3 moles

The kinetic-molecular theory is a model that describes the behavior of matter at a microscopic level.

In solids, this theory suggests that the particles (atoms or molecules) that make up the solid are in constant motion and are held together by strong intermolecular forces. The particles vibrate about their fixed positions and the amplitude of the vibration increases as the temperature increases. This theory also explains properties such as thermal expansion, specific heat, and thermal conductivity of solids.

You can learn more about  kinetic-molecular theory at

https://brainly.com/question/134712

#SPJ4

The function of the gap junction is that it allow the direct diffusion of the ions and the small molecules in between the adjacent cells.

The Gap junctions are the clusters of the intercellular channels that will allow the direct diffusion of the ions and the small molecules in between the adjacent cells. The Gap junctions will allow the exchange of the ions, the second messengers, and the small metabolites in between adjacent the cells and are formed by the two unrelated protein of the families, the pannexins and the connexins.

The gap junction is that allows the direct chemical communication in the between adjacent in the cytoplasm.

To learn more about gap junction here

https://brainly.com/question/8252653

#SPJ4

D-, L-, and D-allo-threonine isomers of threonine have no nutritional or other advantages. More often than natural proteins, Thr is utilised to synthesise Thr.

Chiral centres are those to which four distinct atom groups are bound. Carbon a cannot be a chiral carbon since it has three hydrogen atoms connected to it. Since it is doubly linked to oxygen, it is not the carboxyl carbon either. Furthermore, because it is bound to three rather than four separate groups of atoms, the amino nitrogen is ineligible in any case.

Due to the two chiral centres in threonine, there are four potential stereoisomers. Other than being rare in nature, the isomers of threonine (D-, L-, and D-allo-threonine) have no nutritional or other benefit. Nowadays, synthetic Thr is used more frequently than natural proteins to make Thr.

The chiral centres of amino acids can be one or many. Except for glycine, the a-carbon is chiral in all amino acids. There are extra chiral centres in some amino acids. Because there are four distinct groups connected to the carbon atom, these are chiral centres.

To learn more about threonine refer to;

https://brainly.com/question/30611573

#SPJ4

The correct order of the steps in a generalized signal transduction pathway is:

A. Signal molecule binds to receptor B. molecules within cell transduce signal C. cell responds

The binding of a signal molecule, also known as a ligand, to a particular receptor protein on the cell surface or inside the cell is the initial step in signal transduction. The interaction of the signal molecule changes the shape of the receptor protein, activating downstream signalling pathways.

The signal is then transduced by molecules within the cell in the second stage, which entails the signal being sent from the active receptor to the intracellular signalling molecules. Second messengers, protein kinases, and other signalling proteins are examples of these molecules.

The process concludes with the cell's reaction to the signal, which might include changes in gene expression, protein synthesis, cell division, differentiation, or death. The kind of cell, the nature of the signal, and the environment in which the signal is received all influence the nature of the response.

For more such questions on ligand, click on:

https://brainly.com/question/9651961

#SPJ4

The molality of the ethanol solution is 0.859 moles per kilogram of water.

To calculate the molality, divide the mass of the solute (ethanol) by the mass of the solvent (water) and multiply by the appropriate conversion factor to express the result in moles per kilogram. To calculate the molality, we first need to determine the mass of ethanol in the solution. We know that the solution is 16.9% ethanol by mass, so we can calculate the mass of ethanol in the solution as follows:

0.169 x total mass of solution = mass of ethanol.

To convert this mass of ethanol to moles, we divide by the molar mass of ethanol (46.07 g/mol), and then divide the number of moles by the mass of the solvent (water) to get the molality. Finally, we must convert the answer to the correct units (moles per kilogram) to express the molality of the solution.

Learn more about Ethanol:

https://brainly.com/question/30272157

#SPJ4

Answer:

7.72 moles

Explanation:

Answer:

344.312

or 334³⁹\¹²³

Explanation:

hope it helps

The Bohr effect refers to the phenomenon where hemoglobin has a decreased affinity for oxygen in conditions of decreased pH and increased levels of carbon dioxide (PCO2). In other words, hemoglobin more readily unloads oxygen in these conditions.

When carbon dioxide is produced by metabolizing tissues, it combines with water to form carbonic acid, which lowers the pH of the blood. As pH decreases, hemoglobin's affinity for oxygen decreases, causing it to more easily release oxygen to the tissues that need it. This allows for efficient oxygen delivery to active tissues and organs during exercise or other metabolic activities.

In contrast, increased pH and decreased PCO2, as would be found in the lungs during gas exchange, increase hemoglobin's affinity for oxygen, enabling it to more efficiently pick up oxygen for transport to the tissues. Decreased pH and increased temperature can also cause a decrease in hemoglobin's affinity for oxygen, facilitating the release of oxygen to the tissues.

To learn more about Bohr effect  refer to:

brainly.com/question/15970643

#SPJ4

If the enthalpy of solvation is high and positive, it means that the solute wants to dissolve in the solvent. But if the entropy of solvation is only slightly positive, it means that the solute may not dissolve completely.

Enthalpy of solvation, also known as enthalpy of dissolution, refers to the change in enthalpy that occurs when a solute dissolves in a solvent to form a solution. Enthalpy is a measure of the total energy of a system, including both thermal and potential energies.

In the case of solvation, the enthalpy of solvation is the change in enthalpy that results from the interactions between the solute and solvent particles as the solute dissolves in the solvent. If the enthalpy of solvation is positive, it means that the solute-solvent interactions are exothermic, releasing energy and making the solution energetically favourable. If the enthalpy of solvation is negative, it means that the solute-solvent interactions are endothermic, absorbing energy and making the solution energetically unfavourable.

In this case, the overall Gibbs free energy change of the solution would be dominated by the large positive enthalpy of solvation, making the solution energetically favourable. The solution would be thermodynamically stable and would tend to form spontaneously. However, the small positive entropy of solvation suggests that the solute may not dissolve completely, as the entropy increase is not very significant.

To know more about Enthalpy of Salvation, visit:

https://brainly.com/question/14047927

#SPJ1

The name of FeSO₄ is Ferrous Sulfate

Green vitriol is the common name for the iron salt ferrous sulfate. Injectable iron includes iron dextran and inferno. Oral iron is known by the generic names ferrous fumarate, ferrous gluconate, and ferrous sulfate. The best and least expensive form of iron supplementation is ferrous sulfate.

It is created when iron filings are added to a solution of copper sulfate; because iron is more reactive than copper, it pushes the copper out of the way and forms iron sulfate in its place.

FeSO₄ =Ferrous Sulfate

Density =2.84 g/cm³

Molecular Weight/ Molar Mass = 151.908 g/mol

Boiling Point >300 °C

Melting Point 56-64 °C

Chemical Formula FeSO₄

To know more about ferrous sulfate click here;

https://brainly.com/question/30642189

#SPJ4

The alcohol mentioned above generates carbon dioxide in Methanol per mole burnt.

Methanol is a substance with the chemical formula CH3OH. The simplest alcohol, it is a colorless, flammable, light, volatile liquid with a distinct odor that is gentle and sweeter than ethanol.

It functions as an antifreeze, fuel, and solvent for ethyl alcohol while a polar liquid at room temperature. With the help of oxygen and sunlight, methanol is converted into carbon dioxide and water.

Burning methanol in the air produces carbon dioxide and water:

2CH3OH + 3O2 - 2CO2 + 4H20

A methanol flame appears to be practically colorless. To prevent colorlessness on the nearly undetectable fire when burning methanol, precautions should be taken.

To know more about carbon dioxide

https://brainly.com/question/25385913

NaCl2 is not a valid compound because sodium chloride (NaCl) exists as discrete Na+ and Cl- ions, and not as a molecule that contains two chloride ions.

1) Sodium chloride(Na2Cl2)

2) Molecular Formula Cl2Na2

3) Molecular Weight 116.88

If you meant Na2Cl2, which is disodium dichloride, the molar mass can be calculated by adding the atomic masses of two sodium atoms and two chlorine atoms:

Na2Cl2:

1) Two sodium (Na) atoms have a total atomic mass of 2 × 22.99 g/mol = 45.98 g/mol.

2) Two chlorine (Cl) atoms have a total atomic mass of 2 × 35.45 g/mol = 70.90 g/mol.

So, the molar mass of Na2Cl2 is:

45.98 g/mol (Na) + 70.90 g/mol (Cl) = 116.88 g/mol

The molar mass of Na2Cl2 is 116.88 g/mol.

To learn more about  molar mass:

https://brainly.com/question/22997914

#SPJ4

The equilibrium concentrations are approximately:

[H2] = 0 M

[Br2] = 0 M

[HBr] = 0.668 M.

At equilibrium, the equilibrium constant, K, indicates the connection between the reactants and products of a reaction. When the rates of forwarding and backward reactions are equal, a reaction has reached equilibrium.

The equilibrium constant expression for the reaction is:

Kc = [HBr]^2 / ([H2] * [Br2])

We are given that Kc = 2.180 × 10^6 at 730°C. We can use this information to set up an ICE (initial, change, equilibrium) table and solve for the equilibrium concentrations of the three species.

Initial concentrations:

[HBr] = 5.20 mol / 18.7 L = 0.278 M (since 2HBr are formed from 1 mol Br2 and 1 mol H2, initial [Br2] and [H2] are both 0)

Change in concentrations:

Let x be the change in concentration of HBr. Then, the change in concentration of H2 and Br2 will be -2x and -x, respectively.

Equilibrium concentrations:

[H2] = 0 - 2x

[Br2] = 0 - x

[HBr] = 0.278 + x

Substituting these concentrations into the equilibrium constant expression and solving for x gives:

Kc = [HBr]^2 / ([H2] * [Br2])

2.180 × 10^6 = (0.278 + x)^2 / (2x * x)

Solving for x using this equation gives:

x = 0.390 M

Therefore, the equilibrium concentrations are:

[H2] = 0 - 2x = -0.780 M (Note: negative concentration is unphysical, but indicates that all H2 reacted)

[Br2] = 0 - x = -0.390 M (Note: negative concentration is unphysical, but indicates that all Br2 reacted)

[HBr] = 0.278 + x = 0.668 M

To know more about equilibrium, visit:

https://brainly.com/question/30694482

#SPJ1

Iron (Fe) does NOT fit in the pattern in column 7 because Iron is a metal.

What are the characteristics of Iron (Fe)?

1. Iron (Fe) is a silvery-gray metal that is very malleable and ductile.

2. It has a melting point of 1538 °C (2798 °F) and a boiling point of 2862 °C (5164 °F).

3. It is the most abundant element in the Earth's crust, making up about 5.6% of its mass.

4. It is magnetic, and it is an important component of steel and other alloys.

5. Iron is also an essential element for biological processes, and it is necessary for the formation of hemoglobin in red blood cells.

Iron is not an element in column 7 of the periodic table because it is a transition metal, which is found in columns 3-12. Column 7 contains the halogens (Group 17), which are non-metallic elements. Allow (iron) had different properties (to oxygen and sulfur) and it ignore electrons.

Therefore, Iron is a metal is the answer.

To learn more about Iron (Fe) from the link

https://brainly.com/question/28303739

#SPJ1

Answer:

true

Explanation:

2.8 grams of NaCl are in 14.3 L of a 2.38 M solution of NaCl." The molarity is defined as the number of moles of solute present in 1 liter of solution.

The term molarity is defined as the number of moles of solute present in 1 liter of solution.Molarity is also known as the molar concentration of a solution.

Given:

Volume of solution = 14300 mL

Molarity of sodium chloride = 2.38 M

Molar mass of sodium chloride (NaCl) = 59 g/mole

2.38 = mass of NaCl × 1000 / 59g × 14300

mass of NaCl = 2.38 × 59g × 14300 / 1000

= 2.8 grams

Thus, 2.8 grams of NaCl are in 14.3 L of a 2.38 M solution of NaCl.

To learn more about the molarity, follow the link;

https://brainly.com/question/8732513

#SPJ9

The volume of a gas is halved during an adiabatic compression that increases the pressure by a factor of 2.5 is (5^(γ-1))^(1/γ)

An adiabatic process is one in which there is no heat transfer to or from the system, so the change in internal energy of the system is due to the work done by the gas.

PV^γ = constant,

where P is the pressure, V is the volume, and γ (gamma) is the adiabatic index, which is equal to the ratio of specific heats for the gas (Cp/Cv). For a monatomic gas (such as helium), γ = 5/3, and for a diatomic gas (such as nitrogen), γ = 7/5.

If the volume of the gas is halved and the pressure is increased by a factor of 2.5 during an adiabatic compression, the new pressure and volume can be related as follows:

P2V2^γ = P1V1^γ

P2 = 2.5P1

V2 = V1/2

Substituting the new pressure and volume into the equation of state:

(2.5P1)(V1/2)^γ = P1V1^γ

Expanding and solving for the change in temperature:

2.5(V1/2)^γ = V1^γ

5^(1/γ)(V1/2) = V1

(V1/2)^(1-1/γ) = 5^(1/γ)

T2/T1 = (V1/2)^(γ-1)

=> (5^(1/γ))^(γ-1)

=> (5^(γ-1))^(1/γ)

The exponentiation of 5 raised to the power of (γ-1) gives the factor by which the temperature changes during the adiabatic compression. The exact temperature change will depend on the specific gas and its adiabatic index.

To learn more about  Adiabatic compression :

https://brainly.com/question/28589673

#SPJ4

During respiration, glucose becomes more oxidized.

What is oxidation?

This is because glucose is broken down into smaller molecules, and in the process, electrons are removed from glucose and transferred to other molecules such as oxygen, resulting in the formation of carbon dioxide and water.

Oxidation is defined as the loss of electrons, and reduction is defined as the gain of electrons. Therefore, when glucose loses electrons during respiration, it is undergoing oxidation, and when other molecules such as oxygen gain electrons, they are undergoing reduction. The overall process of respiration is therefore an oxidation-reduction reaction, where glucose serves as the reducing agent and oxygen serves as the oxidizing agent.

Hence, During respiration, glucose becomes more oxidized.

To learn more about oxidation:

https://brainly.com/question/25886015

#SPJ4

Blue is the color absorbed by a solution that should appear as the given color orange. If the material absorbs blue you will glimpse the color orange.

When sunlight shines through an orange solution, the violet, blue and green wavelengths are immersed. The different colors enact through. The transmitted light is the light we see, and it glances orange. Colored liquids or solutions glance colored because they absorb some of the light shined on them. Colored objects look the way they do because of reflected light. When sunlight is shined on a green leaf, the violet, red and orange wavelengths are absorbed. The various wavelengths within the visible part are reliable for the different colors we see.

To learn more about the color absorbed by a solution visit here:

https://brainly.com/question/29423232

#SPJ4

The number of the different codons (triplets) code for the amino acid Proline (Pro) is the correct option is D. 4.

A codon is the sequence of the three consecutive nucleotides that present in the mRNA that is the messenger ribonucleic acid strand. The four nucleotides in the mRNA, are as : A U G C in which the  A represents  the adenine, the U represents uracil, the G represents guanine, and the C represents cytosine. The most of the amino acids is encoded with the multiple of the codons.

Thus, the amino acid proline (Pro) is encoded by the  four codons, named as the CCU, CCG, CCC, and CCA.

To learn more about amino acid here

https://brainly.com/question/7987871

#SPJ4