Answer:
recordando también que ** 1mL = 1cm ^ 3 **
(como ** 1 dm ^ 3 = 1 L **)
A scientist has a container with a substance inside. At first, the molecules in the substance move away from each other. Later, the
molecules move around each other
What change did the scientist observe in the substance?
A. Before, the substance was a liquid. Later, it was a solld.
B. Before, the substance was a gas, Later, it was a liquid
ООО
C. Before, the substance was a liquid. Later, it was a gas.
D. Before, the substance was
solid. Later, it was a liquid
The change scientist observed has been that before the substance was in gaseous state, and later it was in liquid state. Thus, option B is correct.
The particles in the different state of the sample has been moving with varying speed and have varying interatomic interactions. The interactions have been changed with the change in the state of matter.
In the solid state, the structure of particles has been very compact, and the particles do not have a particular movement.The liquid sample has been constituted of the sample particles with lesser interatomic interactions. The particles move more freely compared to the solid, around each other.The gaseous particles have been constituted of the least interatomic particle's interaction. The particles are present at a distant and move away from each other.The sample with the scientist has prior movement of the molecules away from each other. Thus, the substance has been present in the gaseous state. The later movement of the samples has been around each other, thus the molecules has been in a liquid state.
The change scientist observed for the substance has been from gaseous state to liquid state. Thus, option B is correct.
For more information about movement of molecules, refer to the link:
https://brainly.com/question/2284581
As the volume of a gas increases, what happens to the pressure of the gas?
how do you prepare copper sulphate
please help me out right now
with what telll meeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
How many atoms are in 4.36 moles of copper ?
Answer:
Moles of Cr in 4.36×1023 atoms of Cr?
I mass of Cr = 52.00
A's# = 6.02x10^23
I don't know how to approach this. Help?
Update:
Moles of Cr in 4.36×10^23 atoms of Cr?
Update 2:
ALSO......
moles of Cu in 9.7×10^21 atoms of Cu?
moles of C2H6 in 2.75×10^23 molecules of C2H6?
Explanation:
Please help me fast What is the Molarity of 100g of Vit. C (C6HBO6) with 2.5L of water?
7. Circle the number that is larger in each pair.
5.6 x 10-6 or
5.6 x 10-5
10 because it's a large number
Order the following elements in order of increasing atomic size.1.Strontium 2.Tin 3.Iodine 4.Rubidium 5.Xenon
Answer Xenon.
Explanation:hope this helpssss
rite TRUE if the statement is correct and FALSE if it is
1. Coral reefs and mangrove swamps are rich so
2. Mangrove swamps protect coastline areas an
3. Cutting down of trees lessen global warming
4. Tropical rainforests serve as shelter and habi
5. Coral reefs come from the waste of marine a
6. Mangrove swamps are found on the deep p
7. Overfishing causes destruction to food chai
8. Coral reefs cause formation of tidal waves.
9. Rainforests ecosystems supply a variety of
10.Coral reefs serve as hatchery for birds.
plete the graphic organize below. Write why y
Ecosystomo
Answer:
uR making us work hard for this and yet all u give is 5 points
The representative particle for NaF
Answer:
Na2S, it is the formula unit
Explanation:
The representative particle of CO2 is the molecule, while for Na2S, it is the formula unit
45) Rank Ca, Se, Co from the lowest to highest ionization energy.
46) Rank Te, S, and O from the lowest to the highest electronegativity.
Answer:
45) Ca < Co < Se
46) Te < S < O
Explanation:
These questions are talking about periodic trends. Here are some things to know about periodic trends:
Electronegativity
how well an element attracts an electronincreases left to right and bottom to top on the periodic tablenoble gases are not includedfluorine is most electronegative element, Francium is leastAtomic Radius
the distance between nucleiincreases from right to left and top to bottom on the periodic table the more electronegative an element is, the smaller it's atomic radiusFrancium has the largest atomic radius while fluorine has the smallestIonization Energy
the energy required to remove an electrondirectly proportional to electronegativityMetallic Character
how closely an element's properties match those of a metaldirectly proportional with atomic radiusHope this helps :)
When 20g of hydrogen gas will react with 20g of chlorine gas, what is the mass of hydrogen chloride formed?
Answer:
40g
Explanation:
equation; H2 + Cl2 ---- 2HCl
mole ratio; 1 mole 1 mole 2 moles
before reaction;20g 20g 0g
after reaction; 20g 20g 40g
Write the complete balanced chemical equation _A+_BC3->_AC2 +_ B
Answer:
Prueba con tus argumentos quienes sufren mas con la violencia?
Answer:
Sure! The complete balanced chemical equation for the reaction you provided is: `2A + BC3 -> AC2 + 3B`.
PLEASE MARK AS BRAINLIESTWhen some solid ammonium nitrate was dissolved in water the temperature decreased from 22 oC to 3 oC. What can be deduced from this observation?
The dissolving is endothermic and ∆H is positive. The dissolving is endothermic and ∆H is negative. The dissolving is exothermic and ∆H is positive. The dissolving is exothermic and ∆H is negative.
Which is a correct statement about an endothermic reaction?
A. The bonds in the reactants are stronger than in the products and ∆H is positive.
B. The bonds in the products are stronger than in the reactants and ∆H is positive.
C. The bonds in the reactants are stronger than in the products and ∆H is negative
D. The bonds in the products are stronger than in the reactants and ∆H is negative.
Which is a correct statement about the following() enthalpy level diagram of a reaction? A. The reaction is exothermic and △H is positive.
E. The reaction is exothermic and △H is negative.
F. The reaction is endothermic and △H is positive.
G. The reaction is endothermic and △H is negative.
Which statements are correct for all exothermic reactions?
I. The products are more stable than the reactants.
II. The bonds in the products are stronger than the bonds in the reactants
III. The enthalpy of the products is less than the enthalpy of the reactants
A. I and II only
B. I and III only
C. II and III only
D. I, II and III
Answer:
1. The dissolving is endothermic and deltaH is positive
2. A. The bonds in the reactants are stronger than in the products and deltaH is positive
3. I can't see the diagram so I don't know the answer (it's a glitch on my part not yours, my school district blocks images automatically on their rented chromebooks)
4. A. I, and II only
Explanation:
When we measure the temperature of a solution, and we notice that the temperature of the water is decreasing, then this is an endothermic reaction..
The dissolved solute (the "invisible" ions) are absorbing the heat, causing the water around it to be colder.. **Heat moves from hot to cold, so the water is losing it's heat and the dissolving (dissolved solute) is gaining heat, meaning that it is Endothermic.
When a reaction is endothermic, the energy that is required to break bonds and attractive forces is greater than the energy required to form bonds and attractive forces. This means that the bonds in the reactants are stronger than in the products and deltaH is positive. Since we know that the energy in the reactants is greater, there is more heat in the reactants. This is also why the dissolved solute would be gaining heat.. If the energy of the reactants is stronger, when it breaks, it will release a lot of energy that the dissolved solute will be absorbing.
Think, heat (q, released or absorbed) is measured in Joules, the higher the Joules, the hotter something will be. So, if the heat (q) is negative, that represents the amount of Joules (heat) being released. If it is positive, that is the amount being absorbed. So, if heat is being absorbed then deltaH is positive.
If the diagram shows the products being at a higher energy level than the reactants, then the diagram shows an endothermic reaction.. If we see that the energy from the products is greater, than the energy of the system increased as it absorbed energy from its surroundings.
If the diagrams shows the reactants being at a higher energy level than the products, then the diagram shows an exothermic reaction.. Think of it this way, if we see that the energy from the reactants was greater, than the energy of the system was originally greater than the surroundings, but now (observing the products), it is not, as energy was lost to the surroundings, making this an exothermic reaction.
For exothermic reactions, the energy that is required to break bonds and attractive forces is less than the energy required to form bonds and attractive forces.. This means that energy in the products are greater, so as these bonds are broken and energy is released, the surroundings gain energy/heat. This means that the energy is favorable (more stable), the more negative our potential energy (energy of the system) is, the more favorable our process is.
HELP PLS ILL GIVE BRAINLIEST AND 40 POINTS!!!
According to the information in the table, what comparison can Molly make about the densities of sugar and corn starch?
Density is mass divided by volume (D = M/V)
Select one:
A. Corn starch is more dense than sugar.
B. Sugar is more dense than corn starch.
C. Sugar is more dense than baking soda.
D. Both sugar and corn starch are more dense than salt.
Answer:
A.? I think it is A hope it helps
Suppose the reduction of nitric oxide proceeds by the following mechanism:
step elementary reaction rate constant
(g)
(g)
(g)
(g)
(g)
(g)
(g)
(g)
Suppose also
≫
. That is, the first step is much faster than the second.
Answer:
vgj I'll all all all
Explanation:
gghjjhhjjjjjjjj nnh
Every day a 6th grade class puts candy into bags to prepare for Valentine's Day. They put
7 pieces of candy in each bag. If they make 28 bags in 4 days, how many bags would
they make in 10 days?
Which has a greater volume, 100mL of alcohol or 100mL of water? Prove your answer.
Answer water
Explanation:
How many moles are there in 1.20 x 1025 particles of helium?
Answer:
You would get 19.969 moles.
Explanation:
You would get 19.969 moles.
A balloon with a volume of 0.5L at 293K is cooled to 20K. What is the balloon's new
volume?
Answer:
0.03 L
Explanation:
Step 1: Given data
Initial volume of the balloon (V₁): 0.5 LInitial temperature of the balloon (T₁): 293 KFinal volume of the balloon (V₂): ?Final temperature of the balloon (T₂): 20 KStep 2: Calculate the final volume of the balloon
The balloon is filled with air. If we assume it behaves as an ideal gas, we can calculate the final volume of the balloon using Charles' law.
V₁/T₁ = V₂/T₂
V₂ = V₁ × T₂/T₁
V₂ = 0.5 L × 20 K/293 K = 0.03 L
1.I make my cup of coffee in the morning by pouring boiling water over ground-up coffee beans held in a special piece of paper and by collecting the brown liquid that comes through. Which techniques of the five described in the background section is/are used in the preparation of the cup of coffee
Answer:
Filtration
Explanation:
Filtration is a physical separation technique that is used to separate solids from liquids or gases. The process involves the use of a filter which allows just the liquid to pass through.
In this case, the coffee beans is the solid and the boiling water is the liquid. The special piece of paper is the medium (filter) through which the coffee is collected.
The coffee coming through the special piece of paper (filter) is called a filtrate.
Filtration is used in the preparation of the cup of coffee.
What does each daughter cell get from their parent cell?
Psychology **
Richard often has hallucinations of his father who has passed away and has delusions that he is under constant government surveillance. What
is Richard likely to be suffering from?
A anxiety disorder
OB. personality disorder
OC, mood disorders
OD
schizophrenia
Answer:
D
Explanation:
Which of the following was a major goal of the National Association for the Advancement of Colored People when it
was formed in 1909?
to end integration
to end segregation
to support black nationalism.
O to support the accommodationist approach
When’s end
Answer:
to end segregation
Explanation:
National Association for the Advancement of Colored People (NAACP), interracial American organization created to work for the abolition of segregation and discrimination in housing, education, employment, voting, and transportation; to oppose racism; and to ensure African Americans their constitutional rights.
To end segregation was a major goal of the National Association for the Advancement of Colored People when it was formed in 1909. Therefore, the correct option is option B.
What is NAACP?
A group of individuals led by W. E. B. Du Bois, Mary's White Ovington, Moorfield Storey, and Ida B. Wells founded the National Association over the Advancement of Coloured People (NAACP) in 1909 as an interracial effort to advance fairness for African Americans. Roy Wilkins and Thurgood Marshall were among the group's leaders.
"To ensure the equal treatment in politics, schools, society, and the economy of the liberties of all persons as to eliminate ethnicity-based discrimination" is its stated objective for the twenty-first century. Political lobbying, public relations campaigns, and legal team-developed lawsuit strategies are just a few of the national NAACP initiatives. To end segregation was a major goal of the National Association for the Advancement of Colored People when it was formed in 1909.
Therefore, the correct option is option B.
To know more about NAACP, here:
https://brainly.com/question/30517849
#SPJ7
Which two formulas are used to calculate potential and kinetic energy?
Answer:
[tex]\boxed{\bold { \large { \boxed {KE=\frac{1}{2} mv^2 \ , \ PE=mgh}}}}[/tex]
Explanation:
Kinetic energy formula
[tex]\displaystyle KE=\frac{1}{2} mv^2[/tex]
Potential energy formula
[tex]\displaystyle PE=mgh[/tex]
[tex]\displaystyle KE \Rightarrow \sf kinetic \ energy \ (J)[/tex]
[tex]\displaystyle PE \Rightarrow \sf potential \ energy \ (J)[/tex]
[tex]\displaystyle m \Rightarrow \sf mass \ (kg)[/tex]
[tex]\displaystyle v \Rightarrow \sf velocity \ (m/s)[/tex]
[tex]\displaystyle g \Rightarrow \sf acceleration \ of \ gravity\ (m/s^2)[/tex]
[tex]\displaystyle h \Rightarrow \sf height \ (m)[/tex]
How many atoms is 45 moles of silicon (Si)?
an atom of which element has the strongest attraction for electons in a chemical bond?cholorine, phosphorus, carbon, sulfur
The number of atoms of any element in the given chemical formula is the number that is written on the foot of the symbol of that element. Therefore, chlorine has the strongest attraction for electrons in a chemical bond.
What is atom?Atom is the smallest particle of any matter. Atom combines to form element and element combine to form molecule or compound.
Atom consists of electron, proton and neutron. The total mass of atom is inside the nucleus. Inside the nucleus proton and neutron is there. So calculate mass of an atom, total mass of all protons is added to the total mass of neutron. Electrons revolve around the nucleus.
Electronegative element have greatest strongest attraction for electrons due to high effective nuclear charge. Among the given molecules, chlorine is the most electronegative element. Chlorine has the strongest attraction for electrons in a chemical bond.
Therefore, chlorine has the strongest attraction for electrons in a chemical bond.
Learn more about atoms, here:
https://brainly.com/question/13518322
#SPJ2
Determine the number of significant figures in 53800
why is eating fruits and vegetables always included in the lists of prevention for malnutrition and micronutrients deficiencies
Significant figures are a measure of __________. an precise and accurate answer. the true value of a measurement. accuracy. precision.
Answer:
Significant figures are a measure of precision.
Explanation:
The significant figures of a number are those that have a real meaning and, therefore, provide some information. Therefore, the set of digits that are known with certainty in a measure are called significant figures and are the digits of a number considered non-null.
Any experimental measurement is inaccurate and must be expressed with its significant figures.
In this way, significant figures express the precision of a measuring tool.