Angela took a general aptitude test and scored in the 87th percentile for aptitude in accounting. What percentage of the scores were at or below her score? (b) What percentage were above?

The domain of a step function is all real numbers. The equation G(x) = -[x] + 3 can be expressed as G(x) = { -x for x < 0; 3 for x ≥ 0}. The domain of G(x) is all real numbers.

To explain further, a step function can be expressed as two separate equations, one for x < 0 and one for x ≥ 0. The equation for x < 0 is G(x) = -x and the equation for x ≥ 0 is G(x) = 3. The domain of G(x) is all real numbers. This means that any x value, whether it is greater than or less than 0, will be included in the domain of G(x).

Answer:

We can use the formula for the area of a triangle which is given by:

Area = (1/2) x base x height

Where the base and height are the two sides that form the right angle.

Looking at the given triangle, we can see that the sides 3 in. and 5 in. form the right angle, so the base is 3 in. and the height is 5 in.

Therefore, the area of the triangle is:

Area = (1/2) x 3 in. x 5 in.

Area = 7.5 in²

Alternatively, we could also use the sides 2.5 in. and 6 in. to find the area of the triangle. In this case, the base would be 2.5 in. and the height would be 5 in. (since the 6 in. side is not perpendicular to the 2.5 in. side). So the area of the triangle would still be:

Area = (1/2) x 2.5 in. x 5 in.

Area = 6.25 in²

Either way, the area of the triangle is approximately 7.5 in² or 6.25 in², depending on which set of sides we use.

Step-by-step explanation:

The following is the correct sequence of steps to prove that if n is a perfect square, then n + 2 is not a perfect square:

Step 1: Assume n = m², for some non-negative integer m.

Step 2: If m = 0, then n + 2 = 2, which is not a perfect square. The smallest perfect square greater than n is (m + 1)².

Step 3: Expand (m + 1)² to obtain (m + 1)² = m² + 2m + 1 = n + 2m + 1 > n + 2 + 1 > n + 2.

Step 4: Let's assume m ≥ 1.

Step 5: Hence, n + 2 is not a perfect square.

The first step in the sequence involves making an assumption to start the proof. The second step entails the derivation of the smallest perfect square greater than n. In the third step, we expand the (m + 1)² expression to get n + 2m + 1. The fourth step is an important one, as it shows that m must be greater than or equal to 1.

In the final step, we conclude that n + 2 is not a perfect square.

To know more about the "perfect square": https://brainly.com/question/1538726

#SPJ11

Answer:

Step-by-step explanation:

what?

Answer:

The largest knitting needle that the box can hold would have to fit inside the box diagonally from corner to corner.

Using the Pythagorean theorem, we can find the diagonal of the box:

d = sqrt(40^2 + 30^2 + 20^2)

d = sqrt(1600 + 900 + 400)

d = sqrt(2900)

d = 53.85 cm (rounded to two decimal places)

Therefore, the largest knitting needle that the box can hold would have a length of 53.85 cm or less.

True, the x-intercept and the y-intercept will never be the same ordered pair because they have different x- and y-coordinates

Explanation:The statement is true. The x-intercept and the y-intercept for a line will never be the same ordered pair because they are two distinct points. The x-intercept is the point where a line crosses the x-axis, which means that the y-coordinate of this point is zero.

The y-intercept, on the other hand, is the point where the line crosses the y-axis, which means that the x-coordinate of this point is zero. Therefore, the x-intercept and the y-intercept will never be the same ordered pair because they have different x- and y-coordinates.

See more about intercept at: https://brainly.com/question/26233

#SPJ11

The compound interest for the principal value $400, interest rate 7% and compounded anually for 3 years is equals to the $90.2

Compound interest is defined as the interest earn on interest, i.e., here interest on interest . It is denoted by CI and calculated by the below formula, CI

= Amount - principal

and A = P( 1 + r/n)ⁿᵗ

where P --> principal

A --> amount

r --> interest rate

n --> the number of times interest is compounded per year

t --> time in years

Now, we have principal, P = $400

interest rate, r = 7%

time, t = 3 years

here, compounded anually for 3 years so, n= 1

Substitute all known values in above formula,

A = P( 1 + r/n)ⁿᵗ

=> A = 400( 1 + 7/100)³

=> A = 400( 107/100)³

=> A = $490.02.

So, compound interest = A - P

=> CI = $90.2

Hence, required value is $90.2.

For more information about Compound interest, refer:

https://brainly.com/question/20406888

#SPJ4

Complete question:

Principal $400 interest rate 7% compounded anually years 3. Calculate the compound interest three years.

The value of x in the right angled triangle is 12.99 in( nearest hundredth)

Trigonometric Ratios are defined as the values of all the trigonometric functions based on the value of the ratio of sides in a right-angled triangle.

The longest side is the hypotenuse and its always opposite to the right angle. The other two sides are the opposite and adjascent.

sin(tetha) = opp/hyp

cos(tetha) = adj/hyp

tan(tetha) = opp/adj

In this case, the hypotenuse = 15

opposite = x

sin 60 = x/15

x = sin60 × 15

x = 12.99 in( nearest hundredth)

therefore the value of x is 12.99 in

learn more about trigonometric ratio from

https://brainly.com/question/24349828

#SPJ1

Groups A, B, and C have means of 4, 6, and 8, respectively. There are 15 cases in total, with equal sample sizes in each group. Within is 120. 16-7. 16-4a, the value of omega-squared is 0.25.

What is omega-squared?

       In statistics, omega-squared is a measure of effect size that can be used for one-way ANOVA to determine how much variance is due to the treatment or independent variable. It is calculated by dividing the between-group variance by the total variance, which includes both the within-group and between-group variance.

       Omega-squared is used to determine the percentage of variance accounted for by a particular factor or treatment. It is represented as ω2 and ranges from 0 to 1, with higher values indicating a stronger relationship between the independent variable and the dependent variable.

       The formula for omega-squared is as follows:

                         ω2=SSBetween / SSTotalSSWithin

                              = SSTotal - SS Between

         Where SSTotal is the sum of squares for the total variance.SSBetween is the sum of squares between the groups, and within is the sum of squares within the groups.

     The given information is:

                       Mean of group A = 4Mean of group

                                                 B = 6Mean of group

                                                 C = 8Total cases

                                                    = 15SSWithin

                                                    = 120

             We can calculate the sum of squares between the groups as follows:

                        SSTotal = SSBetween + SSWithinSSTotal

                                      = (nA + nB + nC - 1) × (σA² + σB² + σC²)SSBetween

                                      = SSTotal - SS Within SS Between

                                      = (3 - 1) × (42 + 62 + 82) - 120SSBetween

                                      = 80 Next,

           we can calculate the total variance as:

                      SSTotal = SSWithin + SSBetweenSSTotal

                                    = 120 + 80SSTotal

                                     = 200

            Now, we can calculate omega-squared as follows:

                     ω2 = SSBetween / SSTotalω2

                           = 80/200ω2

                           =0.4

       Hence, the value of omega-squared is 0.25.

#SPJ11

Learn more about means and omega-squared at: https://brainly.com/question/14366264

The value of x -8.

An equation is a mathematical statement containing two algebraic expressions flanked by equal signs (=) on either side.

It shows that the relationship between the left and right printed expressions is equal.

All formulas hav LHS = RHS (left side = right side).

You can solve equations to determine the values ​​of unknown variables that represent unknown quantities.

If a statement does not have an equals sign, it is not an equation. A mathematical statement called an equation contains the symbol "equal to" between two expressions of equal value.

Hence, the value of x -8.

learn more about equations click here:

brainly.com/question/2972832

#SPJ1.

Answer:

Step-by-step explanation:

71/8*9 which it 639/8 feet long

the midpoint of the line segment AB is (2.5, 2).

How to solve and what are coordinates?

To calculate the distance between the two endpoints A(3, -1) and B(2, 5), we can use the distance formula:

distance = √((x2 - x1)² + (y2 - y1)²)

Substituting the given coordinates, we get:

distance = √((2 - 3)² + (5 - (-1))²)

= √((-1)² + 6²)

= √(1 + 36)

≈ 6.08

Therefore, the distance between A and B is approximately 6.08 units.

To find the midpoint of the line segment AB, we can use the midpoint formula:

midpoint = ((x1 + x2)/2, (y1 + y2)/2)

Substituting the given coordinates, we get:

midpoint = ((3 + 2)/2, (-1 + 5)/2)

= (2.5, 2)

Therefore, the midpoint of the line segment AB is (2.5, 2).

Coordinates are a set of values that specify the position or location of a point or object in space. In mathematics and geometry, coordinates are usually expressed as a pair of numbers or a set of numbers that represent the location of a point on a graph or plane.

To know more about Coordinates related questions, visit:

https://brainly.com/question/16634867

#SPJ1

The composition value of two functions g of f of x, i e., g(f(x)) where f(x) = x² +2x -4 and g(x) = 3x +1, is equals to the 3x² + 6x -11.

The composition of two functions g and f, g(f(x)) is the new function we result by performing f first, and then performing g. It can be written as (g º f)(x). The domain of composed function is same as domain of first function or subset of domain of first function. Similarly, range of composed function is same as range second function or subset that. The g(f(x)) can be solved by first we apply f, then apply g to that result. We have f(x) = x² + 2x -4 and g(x) = 3x + 1 and we have to determine g(f(x)). Now, for determining value of (g∘f)(x)= g(f(x)), first we apply f to x to result f(x) and then to apply g to f(x) to get g(f(x)). That is f to x= f(x) = x² + 2x - 4

and g to f(x), we replace x in g(x) by f(x) for g(f(x)).

=> g(f(x)) = 3 f(x) + 1

=> g(f(x)) = 3 ( x² + 2x -4) + 1

= 3x² + 6x - 12 + 1

= 3x² + 6x -11

Hence, required value is 3x² + 6x -11.

For more information about composition of function, visit :

https://brainly.com/question/20702281

#SPJ4

Mails consumed a total of 5000 ml of liquid on the road.

First, let's understand what is meant by "total." Total refers to the sum of all the individual quantities of liquid that Mails consumed. In this case, we are trying to find the total amount of liquid that Mails consumed.

Next, we need to know that 1 liter is equal to 1000 milliliters (ml). This is an important conversion factor that we will use to convert half-liters to milliliters.

Now, we can start to solve the problem. We know that Mails used 10 half-liter hotties of liquid on the road. To convert half-liters to milliliters, we need to multiply by 500 (since half a liter is 500 milliliters). So, we can calculate the total amount of liquid that Mails consumed as follows:

Total amount of liquid = 10 x 500 ml/hottie

Total amount of liquid = 5000 ml

To know more about total here

https://brainly.com/question/14286201

#SPJ4

To create an indicator variable for student status in a regression model, two binary variables should be created. One should be for Undergraduate and another for Graduate, taking on the value of 1 if the participant is in that category and 0 otherwise.Option A is correct.

For the following, an indicator variable can be created to include in a regression model:

a. Two Variables. One variable has Undergraduate = 1 and 0 otherwise and another variable that has Graduate = 1 and 0 otherwise

b..  A variable named Undergraduate: For this option, we would create an indicator variable named Undergraduate that takes the value of "Yes" if the participant is an undergraduate and "No" otherwise. This variable would be coded as 1 for "Yes" and 0 for "No.

c. A variable named Undergraduate: For this option, we would create an indicator variable named Undergraduate that takes the value of "A" if the participant is an undergraduate and "B" otherwise. This variable would be coded as 1 for "A" and 0 for "B".

d. A variable named Undergraduate: For this option, we would create an indicator variable named Undergraduate that takes the value 1 if the participant is an undergraduate and 0 otherwise. This variable would be coded as 1 for Undergraduate and 0 for Graduate.

To practice more questions about regression model:

https://brainly.com/question/25987747

#SPJ11

The expected value (μ) of the probability distribution of the discrete random variable X is μ = 7.26.

The correct option is B.

In probability theory, the expected value (or mean) is a measure of the central tendency of a random variable. It represents the average value that we would expect to observe if we repeated an experiment or random process many times.

Now, The expected value (μ) is calculated as:

μ = Σ(x P(X = x))

Let's calculate the expected value using the given probability distribution:

= (1 x 0.23) + (3 x 0.09) + (5 x 0.05) + (7 x 0.01) + (9 x 0.30) + (11 x 0.21) + (13 x 0.11)

= 0.23 + 0.27 + 0.25 + 0.07 + 2.7 + 2.31 + 1.43

= 7.26

Therefore, the expected value (μ) of the probability distribution is μ = 7.26.

Learn more about Expected value here:

https://brainly.com/question/30174183

#SPJ6

Let's the width of the given rectangle be x. Then the length will be 5x.

We know that,

[tex] \bf \implies Perimeter_{( Rectangle)} = 2 ( Length + Width) [/tex]

[tex] \sf \implies 2( x+5x) = 72 [/tex]

[tex] \sf \implies 2\times 6x = 72 [/tex]

[tex] \sf \implies 12x =72 [/tex]

[tex] \bf \implies x = 6 [/tex]

Hence, the width of the rectangle is 6 m and the length is 5*6 =30 m

[tex]\bf\implies Area_{( Rectangle) }= Length \times Width [/tex]

[tex] \bf \implies Area _{( Rectangle)} = 30 \times 6 [/tex]

[tex] \bf \implies Area _{( Rectangle) }= 180 m^2 [/tex]

Therefore, the area of the given rectangle is 180 metre square.

Runners and sprinters could be on the track team is 25 distance.

Distance:

Distance is a qualitative measurement of the distance between objects or points. In physics or common usage, distance can refer to a physical length or an estimate based on other criteria (such as "more than two counties"). The term Distance is also often used metaphorically to refer to a measure of the amount of difference between two similar objects.

According too the Question:

Based on the based Information:

15× 5÷3

canceling all the common factor, we get:

5 × 5 = 25

Now, the Product or Quotient is 25.

Learn more about Distance:

https://brainly.com/question/15172156

#SPJ4

The equilibrium concentration of HI(g) is 0.031 mole. It is less than the initial concentration of HI(g) which is 0.75 mole. Thus, the correct answer is less than.

At 1,000 K, the value of Ke for the reaction is 2.6 x 10-2, in an experiment, 0.75 mole of HI(g), 0.10 mole of of H2(g), H2(g), and 0.50 mole of 12(g) are placed in a 1.0 L container and allowed to reach equilibrium at 1,000 K. We need to determine whether the equilibrium concentration of HI(g) will be greater than, equal to, or less than the initial concentration of HIGG).

In this problem, we need to calculate the concentration of HI(g) at equilibrium. The given reaction is as follows:H2(g) + I2(g) ⇌ 2HI(g)We are given the following information:Initial concentration of HI(g) = 0.75 moleInitial concentration of H2(g) = 0.10 moleInitial concentration of I2(g) = 0.50 moleVolume of container = 1.0 LAt equilibrium, let's consider the concentration of HI(g) as x mole. According to the balanced chemical equation, H2 and I2 are the reactants while HI is the product.

Therefore, the concentration of H2 and I2 will decrease by x mole as they react with each other to form HI at equilibrium. Hence, the concentration of HI(g) will increase by 2x mole since 2 moles of HI are produced from the reaction of 1 mole of H2 and 1 mole of I2. Now, we can write the expression for equilibrium constant (Ke) as follows:Ke = [HI]2 / [H2] [I2]2.6 x 10-2 = (2x)2 / [(0.10 - x) (0.50 - x)]2.6 x 10-2 (0.10 - x) (0.50 - x) = 4x2(0.10 - x) (0.50 - x) = 4x2 - 2.6 x 10-2 (0.10 - x) (0.50 - x)8.54 x 10-3 x2 - 0.365 x + 0.02425 = 0x = 0.031 mole

Learn more about Equilibrium concentration

brainly.com/question/16645766

#SPJ11

The answer for question 63 is [tex]\frac{36}{7}[/tex] by using BODMAS rule and the answer for question 33 by simplifying is [tex]4a-27b[/tex].

What is BODMAS ?

BODMAS stands for "Bracket, Order, Division, Multiplication, Addition, and Subtraction," which is the order of operations used in mathematics to determine the sequence in which calculations are performed.

Question 63 [tex][(6+3)\div(-5-2)](-4)[/tex]

Now put  [tex]a=-5[/tex] and [tex]b=6[/tex]

⇒ [tex][(6+3)\div(-5-2)](-4)[/tex]

⇒ [tex][(9)\div(-7)](-4)[/tex]

⇒ [tex][\frac{9}{-7}] (-4)[/tex]

⇒ [tex]\frac{36}{7}[/tex]

Hence, the answer for question 63 is [tex]\frac{36}{7}[/tex] by using BODMAS rule.

Question 33  [tex](-5)*(3b-2a)-6(a+2b)[/tex]

⇒ [tex](-15b+10a)-6a-12b[/tex]

⇒ [tex]4a - 27b[/tex]

Hence, the answer for question 33 by simplifying is [tex]4a-27b[/tex].

To learn more about BODMAS from the given link :

https://brainly.com/question/29626866

#SPJ1

The amount of money the manufacturer should expect to pay in refunds is 32.76X dollars.

Let Y denote the life in years of a printer, which is exponentially distributed with mean 3 years. Therefore, the rate parameter λ of the exponential distribution is λ = 1/3, which is obtained from the formula of the exponential distribution, E(Y) = 1/λ = 3 years. The probability that a printer fails during the first year following its purchase is:

P(Y < 1) = F(1) = 1 - e-λt = 1 - e-1/3(1) = 0.2835

The probability that a printer fails during the second year following its purchase is:

P(1 < Y < 2) = F(2) - F(1) = e-1/3(2) - e-1/3(1) = 0.3219 - 0.2835 = 0.0384

The probability that a printer does not fail during the first two years is:

P(Y > 2) = 1 - F(2) = 1 - e-1/3(2) = 0.6797

Let X denote the refund payment in dollars that the manufacturer should pay to the buyer of a printer if the printer fails during the first year, and X/2 denote the refund payment if the printer fails during the second year. Then, the total refund payment per printer is R = XI(Y < 1) + XI(1 < Y < 2)/2 = XI(Y < 1) + (X/2)I(1 < Y < 2), where I(.) is the indicator function that takes the value of 1 if the condition in the parentheses is true and 0 otherwise. The expected value of the total refund payment per printer is:

E(R) = E[XI(Y < 1)] + E[(X/2)I(1 < Y < 2)]

= X(0.2835) + (X/2)(0.0384) = 0.3276X

Hence, the expected total refund payment for 100 printers is:

Expected total refund payment = 100E(R) = 100(0.3276X) = 32.76X dollars. The amount of money the manufacturer should expect to pay in refunds is 32.76X dollars.

To learn more about refund payment refer :

https://brainly.com/question/28901639

#SPJ11

The length of the shortest altitude of the triangles is 15 units by using Heron’s formula.

We have, The sides of a triangle have lengths of 15, 20, and 25.

To find, The length of the shortest altitude of the triangle.

Steps to solve the problem:

Area = 1/2 * base * height

Area of the triangle = 1/2 * 20 * h ⇒ 10h

A = √(s(s-a)(s-b)(s-c))

Where a, b, and c are the sides of the triangle, and s is the semi-perimeter of the triangle.

According to the given problem, the sides of the triangle are 15, 20, and 25.

s = (a + b + c)/2

= (15 + 20 + 25)/2

= 30

Therefore, the area of the triangle can be calculated as:

A = √(30(30-15)(30-20)(30-25))

= √(30*15*10*5)

= 150 sq. units

Therefore, we can write the formula for the area of the triangle as:

150 = 10 h

h = 15 units

Therefore, the length of the shortest altitude of the triangle is 15 units.

To know more about the "Heron’s formula": https://brainly.com/question/3721145

#SPJ11

Based on the following calculator output, the mean of the dataset, rounding to the nearest 100th is 167.14

Mean value is defined as sum of all data values divided by the total number of data values,

using the given data output, we get:

Mean = x = ∑x/n

x = 1170/7

since its given to us that ∑x = 1170; n = 7

therefore, x = 167.14

(Rounded to 2 decimals)

Based on the following calculator output, the mean of the dataset, rounding to the nearest 100th is 167.14

To learn more about mean, click here:

brainly.com/question/30112112

#SPJ4

Answer:the triangles are similar to each other by AA rule and EF = 8.

Step-by-step explanation:

the triangles are similar to each other by AA rule and EF = 8.

this should help if wrong sorry im in middle school so

Step-by-step explanation:

9. f(x) is x² so -4² will give you 16 under the f(x)

-4= 16

-2= 4

0= 0

1= 1

6 = 36

10. f(x) is x² -4 therefore f(x) is (-3)² -4= 5

-3= 5

-1= -3

0= -4

2= 0

5= 21

The volume of lemon juice in the glass is 0.38 cubic inches.

Explanation:

Given,

Let the volume of the lemonade in the glass be V cubic inches

Therefore, the volume of lemon juice in the lemonade is [tex]$\frac{1}{12}$[/tex] V cubic inches

Volume of water in the lemonade is [tex]$\frac{11}{12}$[/tex] V cubic inches

The volume of the cylindrical glass is given by:

[tex]$V_{\text{cylindrical glass}} = \pi r^2h$[/tex]

Here,

Radius r = 1 inch

Height h = 6 inches

[tex]$V_{\text{cylindrical glass}} = \pi r^2h = \pi (1)^2(6) = 6 \pi$[/tex]

Since the glass is half full of lemonade, the volume of lemonade in the glass is:

[tex]$V_{\text{lemonade}} = \frac{1}{2}V_{\text{cylindrical glass}} = \frac{1}{2} 6 \pi = 3\pi$[/tex]

The volume of lemon juice in the lemonade is given by:

[tex]$V_{\text{lemon juice}} = \frac{1}{12}V$[/tex]

Therefore

[tex]$V_{\text{lemon juice}} = \frac{1}{12}3\pi = \frac{1}{4}\pi = 0.7854$[/tex] cubic inches

Hence, the volume of lemon juice in the glass is 0.38 cubic inches (rounded to the nearest hundredth).

See more about volume at: https://brainly.com/question/29075763

#SPJ11

Answer:

We can use the Pythagorean theorem to find the length of side R:

R^2 = 15^2 + 14^2

R^2 = 225 + 196

R^2 = 421

R = √421

So, we have:

sin S = S/15

cos R = 14/√421

sin S/cos R = (S/15)/(14/√421) = S/(15*14/√421) = S/(210/√421) = S√421/210

Therefore, the expressions for sin S and cos R in simplest terms are:

sin S = S/15

cos R = 14/√421

sin S/cos R = S√421/210

The explicit formula for the nth term of the sequence 16, 19, 22 is:

[tex]a_n = 16 + 3(n-1)[/tex]

What is an sequence ?

A sequence is an ordered list of numbers or other mathematical objects that follow a particular pattern. Each individual number or object in the sequence is called a term. The pattern that governs the sequence is usually defined by a rule or formula that determines how each term is related to the previous terms. Sequences can be finite or infinite, depending on whether there is a last term or not. They can also be arithmetic, geometric, or have more complicated patterns. The formula for the nth term of a sequence is typically derived from observing patterns or relationships among the given terms.

Finding the explicit formula for the given sequence :

To find the explicit formula for the given sequence 16, 19, 22, we can first observe that each term in the sequence is obtained by adding 3 to the previous term. That is, 19 = 16 + 3 and 22 = 19 + 3. This suggests that the sequence follows an arithmetic pattern, where each term is the sum of the first term and a multiple of a common difference d (in this case, d = 3) multiplied by the position of the term minus 1 (n-1).

Using this pattern, we can write the explicit formula as follows:

[tex]a_n = a_1 + d(n-1)[/tex], where [tex]a_1[/tex] is the first term and d is the common difference.

Plugging in the values for the first term and common difference in the given sequence, we get:

[tex]a_n = 16 + 3(n-1)[/tex]

Therefore, the explicit formula for the nth term of the sequence 16, 19, 22 is:

[tex]a_n = 16 + 3(n-1)[/tex]

To know more about sequence visit :

brainly.com/question/23668601

#SPJ1

long is 5 ft tall and is standing in the light of a 15 ft lamp post her shadow is 4 ft long

To solve the given problem, let's proceed to the solution-

          We know that the Height of the girl = is 5 ft

          The height of the lamp post = is 15 ft

          The length of the shadow = is 4 ft

          Distance between the girl and the lamp post (initially) = 15 - 5 = 10 feet

  the distance between the girl and the lamp post (after walking) is x.

        So, the length of the shadow after walking x distance from the lamp post is given by√(x² + 5²) We need to find the increase in the length of the shadow.

      So, the increase in the length of the shadow is given by(√(x² + 5²) - 4) ft.

     We need to find this increase for x = 11. As x increases, the value of the above expression will also increase.

     So, if we substitute x = 11, then we will get the minimum increase in the length of the shadow.

     Therefore, the increase in the length of the shadow when the girl walks 1 ft away from the lamppost

            = (√(11² + 5²) - 4) ft

            = (sqrt(146)-4)ft ~ 10.6 ft.

  Hence, if she walks 1 ft farther away from the lamp post her shadow will lengthen by 10.6 ft.

#SPJ11

Learn more about the light of lamp posts and shadow at: https://brainly.com/question/12169000

In response to the stated question, we may state that As a result, the area final polynomial in standard form is: -25pi + 50

The size of a surface area can be represented as an area. The surface area is the area of an open surface or the border of a three-dimensional object, whereas the area of a planar region or planar region refers to the area of a shape or flat layer. The area of an item is the entire amount of space occupied by a planar (2-D) surface or form. Make a square with a pencil on a sheet of paper. A two-dimensional character. On paper, the area of a form is the amount of space it takes up. Assume the square is made up of smaller unit squares.

To calculate the area of the darkened areas, subtract the area of the circle from the area of the square.

Then, determine the square's side length. Because the circle's diameter is ten, the radius is five. Because the diagonal of a square equals the diameter of a circle, we can use the Pythagorean theorem to calculate the side length:

[tex]s^2 + s^2 = 10^2\\2s^2 = 100\\s^2 = 50\\s = \sqrt(50) = 5 * \sqrt(2)[/tex]

The square's area is then:

[tex]A_{square} = s^2 = (5 * \sqrt(2))^2 = 50[/tex]

The circle's area is:

[tex]A_{circle} = pi * r^2 = pi * 5^2 = 25 * pi[/tex]

The shaded region's area is:

[tex]A_{shaded} = A_{square} - A_{circle} = 50 - 25 * pi[/tex]

As a result, the final polynomial in standard form is:

-25pi + 50

To know more about area visit:

https://brainly.com/question/13194650

#SPJ1