anyone know all the x's?

Answer:

Question 4

a) 0.667

b) 0.833

c) 0.833

d) 0

Question 5

a) 32 yards

b) $312

Step-by-step explanation:

Probability question 4

The best way to solve these probability questions is to enumerate and count the total set of outcomes and then enumerate and count the specific set of outcomes they are looking for in each part .

Since the experiment consists of rolling a fair single 6-sided die  we can enumerate the set of  possible outcomes as
{1, 2, 3, 4, 5, 6}. This is also referred to in probability as sample space.

There are 6 possible outcomes

The probability of getting any one number is 1/6 whether it be a 1, a 2 or 3, 4, 5 or 6.

In general P(a specific outcome) = Number of ways of getting that outcome ÷ total number of all possible outcomes

part a)
Rolling an even==>  Set of outcomes  = {2, 4, 6}
Rolling a 3 => {3}

Rolling a 3 or even = {2, 3, 4, 6}; 4 elements
P(even or 3 ) = 4/6 = 2/3 = 0.667

Part b)
Number > 2 ==> { 3, 4, 5, 6}
Even: {2, 4, 6}

Even or greater than 2 = {2, 3, 4, 5, 6}; 5 elements  - we do not duplicate

P(Even or greater than 2 ) = 5/6 = 0.833

part c)
Odd number: {1, 3, 5}
Number less than 6: {1, 2, 3, 4, 5}
Combining the two we get: {1, 2, 3, 4, 5} for a total of 5 outcomes

P(odd or less-than 6 ) = 5/6 = 0.833

part(d)
Rolling a 2 and a 4
You cannot roll a 2 and a 4 in one toss so the probability is 0

Question 5
I think you have overly complicated the working of this problem. There is no need to use right triangle, hypotenuse etc

If you have a rectangle with length = L and width = W, the perimeter is just

P = 2( L + W)

Here we can choose any dimension for L and the other for W
Let's choose L = 11 (greater number)
W = 5

Perimeter P = 2 (11 + 5) = 2(16) = 32 yards

b) It costs $3.25 per foot for the fencing..
Careful! The  only tricky part here is the units. It is given in $ per square foot whereas the dimensions of the plot are given in yards and the perimeter is also in yards. Watch out for these tricks in other questions

Convert perimeter from yards to feet

32 yards = 32 x 3 = 96 feet  (there are 3 feet to a yard)

Cost of 96 feet of fencing at $3.25 per foot
= 96 x 3.25 = $312

There ratio are [tex]28[/tex] starfish inside an aquarium, with a dolphin to pufferfish ratio of 1.

The ratio may be defined as the number of ways you can represent one item as a percentage of another. Only when the two quantities in a ratio share the same unit can they be compared. Ratios are employed to compare two items.

Ratios contrast two figures by typically dividing them. A/B would be your formula if you were comparing each data point (A) to that other data point (B). This indicates that you are multiplying info A by info B. If A is five and B is ten, for instance, your ratio will indeed be 5/10.

Dolphins to pufferfish to starfish: [tex]2:3:7[/tex]

So for every [tex]2[/tex] dolphins, there are [tex]7[/tex] starfish. We know there are 8 dolphins, so we can set up a proportion:

[tex]2[/tex] dolphins / [tex]7[/tex] starfish = 8 dolphins / x starfish

where [tex]x[/tex] is the number of starfish.

Solving for x, we get:

[tex]x[/tex] starfish = (7 starfish * [tex]8[/tex] dolphins) / [tex]2[/tex] dolphins

[tex]x[/tex] starfish = [tex]28[/tex] starfish

Therefore, there are [tex]28[/tex] starfish in the aquarium.

To know more about ratio visit:

https://brainly.com/question/867293

#SPJ1

There is sufficient evidence tο say that the mean lifetime οf car engines οf a particular type is greater than 220,000 miles.

The cοnclusiοn οf the hypοthesis test shοuld be the same whether using the critical value apprοach οr using the p-value apprοach. Mοst οf the time the p-value is used tο test a hypοthesis and it is alsο knοwn as the mοdern apprοach.

Hο: μ ≤ 220000

Ha: μ > 220000

Upper Tail

The significance level,

α = 0.01

The sample mean,

¯x = 226450

The sample standard deviation,

s = 11500

The sample size,

n=23

Test statistics:

[tex]$t={\frac{{\bar{x}}-\mu}{{\frac{s}{\sqrt{n}}}}}$[/tex]

[tex]$={\frac{226450-2220000}{\dfrac{11500}{\sqrt{23} y} }$[/tex]

≈ 2.69

Decision rule:

Reject the null if,

p-value ≤α

Decision rule:

Reject the null if,

|Calculated t |≥|Critical t|

Degrees of freedom:

Df = n−1

=22

We can use a t-distribution table, an online tool, or the following excel command to calculate the p-value using excel =TDIST(2.69, 22, 1):

p-value = P(t>2.69)

≈0.0067

Critical value of t using excel: =TINV(0.02, 22)

t(critical) = tα,

df = t(0.01,22)

≈2.51

Decision:

p-value ≈0.0067<α =0.0100

Reject the null.

Conclusion:

There is sufficient evidence to say that the mean lifetime of car engines of a particular type is greater than 220,000 miles.

To know more about test statistic visit:

brainly.com/question/29296846

#SPJ1

Complete question:

The 90% confidence interval for the proportion of district residents in favor of starting the school day 15 minutes later is (0.392, 0.548). The true proportion is estimated to lie within this interval with 90% confidence.

To calculate the 90% confidence interval for the true proportion of district residents who are in favor of starting the school day 15 minutes later, we can use the following formula:

CI = p ± z*(√(p*(1-p)/n))

where:

CI: confidence interval

p: proportion of residents in favor of starting the day later

z: z- score based on the confidence level (90% in this case)

n: sample size

First, we need to calculate the sample proportion:

p = 94/200 = 0.47

Next, we need to find the z- score corresponding to the 90% confidence level. Since we want a two-tailed test, we need to find the z- score that cuts off 5% of the area in each tail of the standard normal distribution. Using a z-table, we find that the z- score is 1.645.

Substituting the values into the formula, we get:

CI = 0.47 ± 1.645*(√(0.47*(1-0.47)/200))

Simplifying this expression gives:

CI = 0.47 ± 0.078

Therefore, the 90% confidence interval for the true proportion of district residents who are in favor of starting the school day 15 minutes later is (0.392, 0.548). We can be 90% confident that the true proportion lies within this interval.

Learn more about the confidence interval here: brainly.com/question/24131141

#SPJ4

To find the derivative of the function f(x), we need to take the derivative of the natural logarithm (ln) of the function. We can do this by using the chain rule, which states that the derivative of the composition of two functions is equal to the derivative of the outer function times the derivative of the inner function.

The derivative of the outer function (ln) is 1/f(x), and the derivative of the inner function (14 - e-2x) is -2e-2x. So the derivative of f(x) is:

f'(x) = 1/f(x) × (-2e-2x)

f'(x) = 1/(ln(14 - e-2x)) × (-2e-2x)

f'(x) = -2e-2x/(14 - e-2x)

To learn more about “derivatives” refer to the : https://brainly.com/question/12047216

#SPJ11

The nth term of the sequence is 2^n.

(a) 3, 3, 3, 3, ... is a sequence that has 0 for both its first and second differences. That is, every term in the sequence is the same.(b) The sequence is the series of natural numbers. It has 0 for its first and second differences, and 6 for its third differences. The nth term of the sequence is n.(c) The sequence has 0 for its first 99 differences and 100! for its 100th difference. The nth term of the sequence is 2^n.

Learn more about Sequence

brainly.com/question/1606838

#SPJ11

Answer:

The 2nd equation is false.

Step-by-step explanation:

40 ≠ 58, so we can say the 2nd equation is false.

The sampling approach that was used in the statement "Kane randomly sampled 250 nurses from urban areas and 250 from rural areas from a list of licensed nurses in Wisconsin to study their attitudes toward evidence-based practice" is Stratified random sampling.

Stratified random sampling is a method of sampling that is based on dividing the population into subgroups called strata. Stratified random sampling is a statistical sampling method that involves the division of the population into subgroups or strata, and a sample is then drawn from each stratum in proportion to the size of the stratum. It's a sampling method that ensures the representation of all population strata in the sample, making it more effective than simple random sampling.

Stratified random sampling is used when there are variations in the population that are likely to influence the outcome of the study. The stratified random sampling method is used to ensure that these differences are reflected in the sample. In this way, the results of the study are more representative of the entire population than they would be if a simple random sample were used.

Learn more about Stratified random sampling here: https://brainly.com/question/20544692.

#SPJ11

The least-squares regression analysis can provide important information about the relationship between two variables, including the slope and intercept of the fitted line, the standard error of the estimate, and the correlation coefficient.

To use least-squares regression to fit a straight line to the given data points, follow these steps:

Calculate the means of x and y values:
  x_mean = (6 + 7 + 11 + 15 + 17 + 21 + 23 + 29 + 29 + 37 + 39) / 11 = 21.18
  y_mean = (29 + 21 + 29 + 14 + 21 + 15 + 7 + 7 + 13 + 0 + 3) / 11 = 14.55

Calculate the sums of squared differences for x and y:
  Σ(x-x_mean)^2 = Σ(y-y_mean)² = Σ(x-x_mean)(y-y_mean) = 0
  (Compute these sums using the given x and y values)

Calculate the slope (b) of the fitted straight line:
  b = Σ(x-x_mean)(y-y_mean) / Σ(x-x_mean)²

Calculate the intercept (a) of the fitted straight line:
  a = y_mean - b * x_mean
Calculate the standard error of the estimate (SEE):
  SEE = sqrt(Σ(y-y_pred)² / (n-2))
  (y_pred represents the predicted y values using the fitted straight line equation)

Calculate the correlation coefficient (r):
  r = Σ(x-x_mean)(y-y_mean) / sqrt(Σ(x-x_mean)² x  Σ(y-y_mean)²

Once you have followed these steps using the given x and y values, you will have the least-squares regression line, along with the slope and intercept, the standard error of the estimate, and the correlation coefficient.

Learn more about least-squares regression

brainly.com/question/30044885

#SPJ11

First term in a geometric sequence is 5, and common ratio is 2. The sum of the first n terms of the sequence is 163,835.

The following formula can be used to calculate the sum of the first n terms of a geometric sequence:

Sn = a (1 - rn) over (1 - r),

where

a is the first term,

r is the common ratio, and

n is the number of terms.

So, Sn = a (1 - rn) over (1 - r) => 163835 = 5 (1 - 2n) over (1 - 2).

Simplifying it, we have

   163835 = 5 (1 - 2n) over (-1)

=> 163835 = -5 + 10n

=> 163840 = 10n

  => n = 16,384.

Therefore, the value of n is 16,384.

You can learn more about geometric sequence at

https://brainly.com/question/24643676

#SPJ11

The Area of Bella's garden as required to be determined in the task content is the difference of the area of the rectangular backyard and the right triangular fish pond.

It follows from the task content that the area of Bella's trapezoidal garden is to be determined from the given information.

Since the garden and the fish pond are from the rectangular backyard; the sum of their areas is equal to the area of the backyard.

Ultimately, the area of the garden is the difference of the area of the rectangular backyard and the right triangular fish pond.

Read more on difference;

https://brainly.com/question/28368605

$SPJ1

The two-period moving average model and the two-period weighted moving average model are both common forecasting methods used to predict future demand. and we understand that the model with the lower MAD and MSE values will have the most accurate forecast.

To determine which model is better for this particular data set, we need to compare the accuracy of each model. To do this, we will calculate the Mean Absolute Deviation (MAD) and the Mean Squared Error (MSE) for each model.
For the two-period moving average model, we can calculate the forecast for period 7 by taking the average of p5 and 6:

Period 7 forecast = (Gallons in Period 5 + Gallons in Period 6)/2

For the two-period weighted moving average model, we can calculate the forecast for period 7 by using the weights of 0.6 and 0.4:

Period 7 forecast = (0.6 x Gallons in Period 5) + (0.4 x Gallons in Period 6)

We can then compare the accuracy of each model by calculating the MAD and MSE. To calculate MAD, we need to subtract the actual demand in each period from the forecasted demand and take the absolute value:

MAD = |Actual demand – Forecasted demand|

To calculate MSE, we need to square the differences between the actual demand and the forecasted demand:

MSE = (Actual demand – Forecasted demand)^2

After calculating the MAD and MSE for each model, we can compare the results to determine which model is better for this data set. The model with the lower MAD and MSE values will have the most accurate forecast.

For more such questions on forecast

https://brainly.com/question/24730207

#SPJ11

The following table shows how many hot cocoas Mei Mei would likely sell if the day's high temperature was 42 oF:

58.

How is a linear function defined?

The following is the definition of a linear function's slope and intercept:

y = mx + b.

The slope, or m, indicates the rate of change.

The value of y at x=0 is represented by the intercept, b.

At y = 100, where the function meets the y-axis, the intercept b is defined as follows:

b = 100.

As y decays to 94 when x rises to six, the slope m is calculated as follows:

m = (94 - 100)/(6 - 0) (6 - 0)

m = -1.

As a result, the function that forecasts how much hot chocolate will be sold at a high temperature.

Lack of Information

The graphic provided at the end of the response provides the linear function's graph.

To know more about linear function, click the below link

https://brainly.com/question/20286983

#SPJ4

Answer:

[tex]\large\boxed{\mathtt{C) \ 12x^{2}-5x-3}}[/tex]

Step-by-step explanation:

[tex]\textsf{For this problem, we are asked to multiply 2 Binomials.}[/tex]

[tex]\textsf{We should use the FOIL Method.}[/tex]

[tex]\large\underline{\textsf{FOIL Broken Down;}}[/tex]

[tex]\textsf{F - Fronts}[/tex]

[tex]\textsf{O - Outers}[/tex]

[tex]\textsf{I - Inners}[/tex]

[tex]\textsf{L - Last}[/tex]

[tex]\large\underline{\textsf{For Example.}}[/tex]

[tex]\mathtt{(2x+2y)(3x+3y)}[/tex]

[tex]\mathtt{(F) \ 2x \times 3x = 6x^{2}}[/tex]

[tex]\mathtt{(O) \ 2x \times 3y = 6xy}[/tex]

[tex]\mathtt{(I) \ 2y \times 3x = 6xy}[/tex]

[tex]\mathtt{(L) \ 2y \times 3y = 6y^{2}}[/tex]

[tex]\textsf{Let's use the FOIL Method for our problem.}[/tex]

[tex]\large\underline{\textsf{FOIL;}}[/tex]

[tex]\mathtt{(4x-3)(3x+1)}[/tex]

[tex]\mathtt{(F) \ 4x \times 3x = 12x^{2}}[/tex]

[tex]\mathtt{(O) \ 4x \times 1 = 4x}[/tex]

[tex]\mathtt{(I) \ -3 \times 3x = -9x}[/tex]

[tex]\mathtt{(L) \ -3 \times 1 = -3}[/tex]

[tex]\large\underline{\textsf{We should have;}}[/tex]

[tex]\mathtt{12x^{2}+4x-9x-3}[/tex]

[tex]\large\underline{\textsf{Combine Like Terms;}}[/tex]

[tex]\large\boxed{\mathtt{C) \ 12x^{2}-5x-3}}[/tex]

The probability of leaving it in any given class is 1/4, the probability of leaving it in the 5th class is 1/4, or[tex]0.250 (25.0%).[/tex]

The probability that the student left her iClicker device in the 5th class is 0.250 (25.0%). This is because the probability of leaving it in any given class is 1/4, and as she attends 5 different classes,

there is 5/4 or 1.25 chances of her leaving it in the 5th class.

To explain further, the probability of an event can be calculated by dividing the number of ways the event can occur by the total number of possible outcomes. In this case, the event is leaving the iClicker device in the 5th class, and the total number of possible outcomes is 5 (for the 5 classes).

for such more questions on probability

https://brainly.com/question/24756209

#SPJ11

The largest possible whole-number length for the third side is 18, which satisfies all three inequalities.

The triangle inequality theorem explains the relationship between the three sides of a triangle. This theorem states that for any triangle, the sum of the lengths of the first two sides is always larger than the length of the third side.

Let x be the length of the third side. By the triangle inequality, we have:

3 + 16 > x and 16 + x > 3 and 3 + x > 16

Simplifying, we get:

19 > x and x > 13 and x < 19

The largest possible whole-number length for the third side is 18, which satisfies all three inequalities.

To know more about Inequality visit:

brainly.com/question/30228778

#SPJ1

The points scored by the remaining players on the team is 31 points.

A component or fraction of a whole can be expressed as a percentage by using a number out of 100. Mathematicians frequently use comparison to represent changes in quantities over time or to compare two numbers. For instance, if a student receives an 80 percent on a test, they properly answered 80 of the 100 questions.

For performing a range of mathematical operations, such as determining the percentage rise or decrease of a quantity or computing interest rates on loans or investments, percentages can be expressed as fractions or decimals.

From the given percentages the total percent is:

Total percentage = 15% + 10% + 13% = 38%

Now, from 100 the remaining percentage is: 100% - 38% = 62%

For the remaining players the score is given as:

Remaining points = 50 * (62/100) = 31

Hence, the points scored by the remaining players on the team is 31 points.

Learn more about percentage here:

https://brainly.com/question/29763752

#SPJ1

The probability that a student completed the homework given that they failed the test is 3/8.

Probability is a branch of mathematics that deals with the study of randomness and uncertainty in events. It involves the measurement and analysis of the likelihood or chance of an event occurring. Probability is expressed as a number between 0 and 1, with 0 indicating an impossible event and 1 indicating a certain event.

The concept of probability is used in many fields, such as statistics, physics, finance, and engineering, to make predictions and decisions based on incomplete information. It provides a framework for analyzing situations in which multiple outcomes are possible and assigns a quantitative value to the likelihood of each outcome.

To find the probability that a student completed the homework given that they failed the test, we need to use conditional probability.

Let A be the event that a student completed the homework and B be the event that a student failed the test.

We want to find P(A | B), the probability that a student completed the homework given that they failed the test.

Using the data from the table, we can see that the total number of students who failed the test is 8 (3 who completed the homework and 5 who did not).

Therefore, P(B) = 8/18 = 4/9 (the probability that a student failed the test)

Out of the 8 students who passed the test, 3 also completed the homework, so P(A and not B) = 3/18 = 1/6.

So, P(A | B) = P(A and B) / P(B) = (1/6) / (4/9) = 3/8.

Therefore, the probability that a student completed the homework given that they failed the test is 3/8.

To know more about outcome visit:

https://brainly.com/question/29815200

#SPJ1

the prime factors of 24 are 2 and 3, which combine to give the unique prime factorization of 24 as 2^3 × 3.

There are no factors of 24 that are prime numbers. A factor of a number is a whole number that divides that number without leaving a remainder. Prime numbers, on the other hand, are numbers that are divisible only by 1 and themselves, and cannot be expressed as the product of any other numbers.

The prime factors of 24 are 2, 2, and 3. We can factorize 24 as 2 × 2 × 2 × 3 or 2^3 × 3. Here, 2 and 3 are both prime numbers, but they are not factors of 24 in isolation. They are only prime factors of 24 when combined in the manner shown.

This fact highlights an important concept in number theory: the uniqueness of prime factorization. Every composite number can be expressed as a unique product of prime numbers. This fundamental theorem of arithmetic is crucial in many areas of mathematics, including cryptography, where it is used to secure communications and protect sensitive information.

In summary, there are no factors of 24 that are prime numbers. However, the prime factors of 24 are 2 and 3, which combine to give the unique prime factorization of 24 as 2^3 × 3.

To know more about prime factorization click here:

brainly.com/question/29763746

#SPJ4

The solution to the initial value problem is yı(t) = ya(t) = [a e^(13t) - (e^(13t) - 1)] (1, 0).

Given information:Consider the initial value problem D' = 13_, zo = [ 2] y(0) = a.To find the eigenvalue 1, an eigenvector v1, and a generalized eigenvector v2 for the coefficient matrix of this linear system.Step-by-step explanation:The given differential equation isD' = 13_Y = [ 2] y(0) = a.The coefficient matrix A for this system is:A = [13]The eigenvalues λ1, λ2 are obtained by solving the characteristic equation:det(A - λI) = 0where I is the 2x2 identity matrixdet(A - λI) = (13 - λ)(-λ) - 2(0) = λ(λ - 13)This equation has two roots:λ1 = 0, λ2 = 13.The corresponding eigenvectors v1 and v2 are obtained by solving the equations:(A - λ1I) v1 = 0, (A - λ2I) v2 = 0. For λ1 = 0, we have(A - λ1I) v1 = (13 0) (v1[1])= (0 0) (v1[2])which implies that v1[1] = 0 and v1[2] is free. Therefore, v1 = (0, 1). For λ2 = 13, we have(A - λ2I) v2 = (0 0) (v2[1])= (0 -13) (v2[2])which implies that v2[1] is free and v2[2] = 0. Therefore, v2 = (1, 0).The generalized eigenvector v3 for λ1 = 0 is obtained by solving the equation:(A - λ1I) v3 = v2For this equation, we have(13 0) (v3[1])= (0 0) (v3[2])which implies that v3[1] is free and v3[2] = 0. Therefore, v3 = (1, 0).b. Find the most general real-valued solution to the linear system of differential equations. Use t as the independent variable in your answers.The general solution of the system is given byy(t) = c1 e^(0 t) (0, 1) + c2 e^(13t) (1, 0) + c3 (t e^(0 t) (0, 1) + e^(0 t) (1, 0))Therefore, the most general real-valued solution to the linear system of differential equations is given byy(t) = c1(0, 1) + c2 e^(13t)(1, 0) + c3 (t(0, 1) + (1, 0))c. Solve the original initial value problem.To solve the given initial value problem, we need to determine the coefficients c1, c2, and c3 that satisfy the initial conditions:y(0) = a = c1(0, 1) + c2(1, 0) + c3(0, 1) + (1, 0)c1 = 0, c2 = a - 1, and c3 = 0Therefore, the solution to the initial value problem is given byy(t) = (a - 1) e^(13t) (1, 0) + (1, 0) = [a e^(13t) - (e^(13t) - 1)] (1, 0) = y1(t)The solution to the initial value problem is yı(t) = ya(t) = [a e^(13t) - (e^(13t) - 1)] (1, 0).

Learn more about Initial

brainly.com/question/13243199

#SPJ11

Option A is the correct option for determining the total number of possible outcomes when selecting a day of the week and a month of the year, which is 84.

To find the total number of outcomes for picking a day of the week and a month of the year, you need to multiply the number of options for each category. There are 7 days in a week, so there are 7 options for picking a day. There are 12 months in a year, so there are 12 options for picking a month. To find the total number of outcomes, you multiply the number of options for each category: 7 x 12 = 84. Therefore, the total number of outcomes for picking a day of the week and a month of the year is 84. Option A is the correct answer.

Learn more about probability here: brainly.com/question/30034780

#SPJ4

Step-by-step explanation:

The change fro 225 to 320 is 95

95 is what percentage of 225?

95/225 x 100% = 42.2% increase

The monthly payment required to pay off a loan of $140,000 at 7% interest would be $776.89 is the correct statement(A).

The statement given is describing a function that relates the monthly payment R of a 25-year variable-rate mortgage loan to the loan amount A and the current interest rate i.

The given values are R = $776.89 and A = $140,000, with an interest rate of 7%. This means that the monthly payment required to pay off a loan of $140,000 at 7% interest would be $776.89.

However, the other statements are incorrect interpretations. For instance, the statement "For a loan of $140,000 at 7.7689% interest, 700 monthly payments would be required to pay off the loan" is incorrect.

This is because the number of payments required to pay off a loan depends not only on the loan amount and interest rate, but also on the term of the loan.

Similarly, the statement "For a loan of $140,000 at 7% interest, 776.89 monthly payments would be required to pay off the loan" is also incorrect, as the number of payments required would be determined by the term of the loan.

Finally, the statement "For a loan of $140,000 at 7.7689% interest, the monthly payment is $700" is also incorrect. This is because, for the given loan amount and interest rate, the monthly payment required would be $776.89, as calculated above.

For more questions like Interest click the link below:

https://brainly.com/question/13324776

#SPJ11

Answer:

Step-by-step explanation:

We can use the compound interest formula to solve this problem:

A = P(1 + r/n)^(nt)

Where:

A = Final amount (which is given as $18,100)

P = Principal amount (the amount Tristan needs to invest)

r = Annual interest rate (6.2%)

n = Number of times interest is compounded per year (12)

t = Time in years (12)

Substituting the values in the formula:

18,100 = P(1 + 0.062/12)^(12*12)

Simplifying the right-hand side:

18,100 = P(1.00516666667)^144

Dividing both sides by (1.00516666667)^144:

P = 18,100 / (1.00516666667)^144

P = $8,167.75 (rounded to the nearest cent)

Therefore, Tristan needs to invest $8,167.75, to the nearest cent, for the value of the account to reach $18,100 in 12 years.

Answer:

The diver descends:

50 seconds x 5 feet/second = 250 feet

The diver ascends:

54 seconds x 4.4 feet/second = 237.6 feet

Therefore, the total change in elevation is:

250 feet (descent) - 237.6 feet (ascent) = 12.4 feet

So, the diver's final elevation is:

0 feet (starting elevation) - 12.4 feet (change in elevation) = -12.4 feet

Therefore, the diver ends up 12.4 feet below sea level.

Answer:

it is 1

Step-by-step explanation:

its is 1 2 3 hsvs jafsnsjhd jsusgsmsi jshsbjdg

Answer:

x=8

Step-by-step explanation:

x-3=5

+3=+3(cancel 3)

_____________

x=8

Yes, she can definitely use her van safety in one journey. The total weight is the weight of potatoes plus the weight of carots.

Given,

Number of sacks of potatoes = 30

Mass of each potato = 25

Total weight of Potatoes = 30 * 25

= 750

Number of sacks of carrots = 20

Mass of each Carot = 7.5

Total weight of Carrot = 20 * 7.5

= 150

(The total weight is the weight of potatoes plus the weight of carrots.)

So, total weight = 750 + 150

= 900

The maximum land which Edith can carry safely in the van is 920 kilograms.

∵ 900 < 920

∴ She can use her van safely.

Learn more about Weight here: brainly.com/question/23312072

#SPJ4

In quadratic functiοn -

          g(x)                                    h(x)                                     d(x)

vertical shift dοwn 3     reflectiοn acrοss the x-axis   vertical shift dοwn 3

hοrizοntal shift left 3     vertical strecht οf 3               hοrizοntal shift right 3

The expressiοn f(x) = ax² + bx + c, where a, b, and c are all integers with a nοt equal tο zerο, denοtes a quadratic functiοn. The shape that a quadratic functiοn's graph takes οn is called a parabοla.

In spite οf the fact that parabοlas might have οpenings that are upward οr dοwnward, varying "widths" οr "steepnesses," they all have the same basic "U" shape.

Quadratic parent: f(x)=x²

The graph is a parabοla with vertex V=(0,0) at the οrigin and οpens up.

When x=1→f(1)=1²→f(1)=1

1) g(x)

The graph οpens up, then there is nοt a reflectiοn acrοss the x-axis.

The vertex is at the pοint (-3,-3): 3 units tο the left and 3 units dοwn οf the vertex οf the parent funtiοn.

When x is 1 unit tο the right frοm the vertex g(x)=1

Then the transfοrmatiοns were applied tο the cuadratic parent functiοn are:

1.1) vertical shift dοwn 3.

1.2) hοrizοntal shift left 3.

2) h(x)

The graph οpens dοwn, then there is a reflectiοn acrοss the x-axis.

The vertex is at the οrigin (0,0).

When x is 1 unit tο the right frοm the vertex h(x)=-3

Then the transfοrmatiοns were applied tο the quadratic parent functiοn are:

2.1) reflectiοn acrοss the x-axis.

2.2) vertical strecht οf 3.

3) d(x)

The graph οpens up, then there is nοt a reflectiοn acrοss the x-axis.

The vertex is at the pοint (3,-3): 3 units tο the right and 3 units dοwn οf the vertex οf the parent funtiοn.

When x is 1 unit tο the right frοm the vertex d(x)=1

Then the transfοrmatiοns were applied tο the cuadratic parent functiοn are:

3.1) vertical shift dοwn 3.

3.2) hοrizοntal shift right 3.

Learn more about quadratic function

brainly.com/question/30929439

#SPJ1

The complete question is -

The given graphs show functions which have been transformed from the quadratic parent, f(x) = x2. Determine which transformations were applied to the quadratic parent function to result in each graph.

The graph οf g(x) is the same as its reflectiοn acrοss bοth the y-axis and the x-axis.

What is a graph?

A graph is a structure amοunting tο a set οf οbjects in which sοme pairs οf the οbjects are in sοme sense "related". The οbjects cοrrespοnd tο mathematical abstractiοns called vertices and each οf the related pairs οf vertices is called an edge.

Tο reflect a functiοn acrοss the y-axis, we replace x with -x in the functiοn. This gives us:

f(-x) = 1/4(8) = 2

This functiοn represents the reflectiοn οf f(x) acrοss the y-axis. Tο reflect this functiοn acrοss the x-axis, we replace f(-x) with -f(-x). This gives us:

-f(-x) = -2

Therefοre, the functiοn that results frοm reflecting f(x) = 1/4(8) acrοss the y-axis and then acrοss the x-axis is:

g(x) = -2

This is a hοrizοntal line that intersects the y-axis at -2. The graph οf g(x) is a straight line parallel tο the x-axis, and it dοes nοt change when reflected acrοss the y-axis οr x-axis. Sο, the graph οf g(x) is the same as its reflectiοn acrοss bοth the y-axis and the x-axis.

Learn mοre abοut graphs οn:

https://brainly.com/question/17267403

#SPJ1

First, re-read the problem until you understand it and can put it into your own words.  I re-wrote it like this:  "Find the area of a rectangle by first finding the length (L) and the width (W)."   [note that I added "find L and W," but that is how I'm going to solve the problem;  I could also have said that we will need the formulas, P=2L+2W and A=LW, but you knew that already, right?).

Translate the problem:

 "The length of a rectangle is 3 ft longer than its width"      means

         L                             =    3             +         W                 (eq1)

 "the perimeter of the rectangle is 30 ft"     means

            P                                = 50                      (eq2)

So, now the math is easy, just find L and W so we can compute the area:

     P = 50 = 2L + 2W                         (eq3; from eq2 and the formula for P)

          50 = 2(3+W)  +  2W              (use eq1 to substitute for L)

          50 = 6 + 2W   + 2W              (distribute)

           50 = 6 + 4W                       (collect terms)

            44 = 4W                        (subtract 6 from both sides)

            11 ft = W                        (divide both sides by 4)

Use the easiest equation (either eq1 or else eq3) to find L:

          L = 3 + W        (eq1)

          L = 3 + 11

         L = 14 ft

What is the area (A)?

          A = L*W

          A = (14 ft) x (11 ft)

          A = 154 sq ft