Answer:
op
Explanation:
At a distance of 1 cm from the source, the flux from the isotropic source is one hundred times brighter. Which source is brighter fifty centimeters away
Another nervous papa bear paces at 1.0 m/s north for 3.0 s, then at 1.6 m/s south for 5.0 s, and then
at 1.4 m/s north for 4.0 s. The average speed of this bear is:
a) 1.3 m/s
b) 1.4 m/s
c) 4.0 m/s
d) 8.0 m/s
Answer:
Explanation:
Average speed is total distance traveled over the time needed to do so.
d = vt
v = (1.0(3.0) + 1.6(5.0) + 1.4(4.0) / (3.0 + 5.0 + 4.0)
v = 16.6 / 12
v = 1.383333333...
v = 1.4 m/s
Balance the following chemical equation:
CO2 + VH20 - CH1206+ voz
[
~
CO₂+
Answer:
Explanation:
Start with Carbon and assume we only get 1 sugar molecule from the process.
you have 6 carbons in the sugar on the right, so you need 6 carbons on the left which only come from CO₂
6 CO₂
you have 12 hydrogen atoms in the sugar on the right, so you need 12 hydrogen atoms on the left which only come from H₂O. At 2 hydrogen atoms per water molecule means you need 6 waters.
6 CO₂ + 6 H₂O → 1 C₆H₁₂O₆
you are supplied with 12 oxygen from the CO₂ and 6 oxygen from the H₂O, but you only need 6 oxygen for the sugar. That means there are 12 oxygen remaining which will become 6 O₂ molecules
6 CO₂ + 6 H₂O → 1 C₆H₁₂O₆ + 6 O₂
If the total translational kinetic energy of the molecules of oxygen in a container is 15 J at room temperature, what is the total rotational kinetic energy of these molecules
Answer:
zero(0)
Explanation:
if a molecule is moving along a straight path, there is zero rotational speed and that component give zero moment in the direction of the molecule's driving force
The ratio of total rotational kinetic energy to the total translational kinetic energy is 3 : 2. Thus, the rotational kinetic energy of oxygen with translational kinetic energy of 15 J is 10 J.
What is rotational kinetic energy?Rotational kinetic energy is the energy generated by virtue of the rotational motion of a molecule. The degree of freedom of a compound or molecules is the sum of its translational degree of freedom, rotational degree of freedom and vibrational degree of freedom.
For a diatomic molecule, there are three translational degrees of freedom along x, y and z directions. Similarly there will be two rotational degree of freedom along the molecular axis.
The ratio of rotational degree of freedom to that of translational motion is 3/2.
Thus Te / Re = 3/2
15 J/ Re = 3/2
Rotational kinetic energy Re = 30/3 =10 J.
Therefore, the rotational kinetic energy oxygen would be 10 J.
To find more on degree of freedom, refer here:
https://brainly.com/question/28789458
#SPJ2
a certain hydraulic jack is used for lifting load. a force of 250N is applied on a small piston with a diameter of 80cm while the diameter of the larger piston is 2.0m.the applied force moves through a distance of 25cm.calculate the maximum mass of a load that can be lifted by the jack and the distance through which the load is lifted.(take g=9.81ms^-2)
The maximum mass of a load that can be lifted by the jack and the distance covered are:
m = 160.2 Kg
h = 25 cm
Given that a certain hydraulic jack is used for lifting load. a force of 250N is applied on a small piston with a diameter of 80cm while the diameter of the larger piston is 2.0m.
The parameters given are
[tex]F_{1}[/tex] = 250
[tex]A_{1}[/tex] = Area of the small piston = π[tex]r^{2}[/tex]
[tex]A_{1}[/tex] = 22/7 x [tex]0.4^{2}[/tex]
[tex]A_{1}[/tex] = 0.5 [tex]m^{2}[/tex]
[tex]F_{2}[/tex] = ?
[tex]A_{2}[/tex] = Area of the large piston = π[tex]r^{2}[/tex]
[tex]A_{2}[/tex] = π x 1
[tex]A_{2}[/tex] = 3.14 [tex]m^{2}[/tex]
To calculate the force on the large piston, we will use the below formula
[tex]F_{1}[/tex]/ [tex]A_{1}[/tex] = [tex]F_{2}[/tex] / [tex]A_{2}[/tex]
Substitute all the parameters into the equation
250/0.5 = [tex]F_{2}[/tex]/3.14
[tex]F_{2}[/tex] = 1570 N
To calculate the maximum mass of a load that can be lifted by the jack, let us apply Newton second law
F = mg
1570 = 9.8m
m = 1570/9.8
m = 160.2 Kg
.(take g=9.81ms^-2)
If the applied force moves through a distance of 25cm, the distance through which the load is lifted will be
[tex]F_{1}[/tex]/ 0.25[tex]A_{1}[/tex] = [tex]F_{2}[/tex] / [tex]A_{2}[/tex]h
250/0.125 = 1570/3.14h
make h the subject of the formula
6280h = 1570
h = 1570/6280
h = 0.25 m
Therefore, the distance through which the load is lifted is 25 cm
Learn more here: https://brainly.com/question/13596980
70 POINT!!!
IF YOU DON'T KNOW THE ANSWER DO NOT PUT A COMMENT BELOW
THERE ARE TWO QUESTIONS YOU HAVE TO ANSWER
QUESTION 1: Identify any variables that are present as dependent variables, independent variables, and constants in your experimental group and your control group.
QUESTION 2: How does knowing the properties of matter help you separate the substances in mixtures?
Answer:
1) Dependent variable: Type of separation method used
Independent variables: Substance that separated out
Constants: Sand, pepper, and salt
2) you can use the properties of matter to decide on a method to separate out a particular substance based on its unique properties. For example, knowing pepper has a very small mass allows you to use the charge of the static electricity to separate out those particles. Additionally, knowing the solubility of salt allows you to add water to the mixture to be able to remove it from the sand, since the salt dissolves in the water which is poured away.
Which event provides evidence that matter can reflect waves?
A. A dog's bark is barely heard through double-pane windows.
B. A bat finds a moth using echolocation.
C. A whale's song is heard hundreds of miles away,
D. A fish appears to be farther from a boat than it is.
Answer:
B. A bat finds a moth using echolocation
Explanation:
100% i just took that test today
why is cooking faster with a pressure cooker. plz help me I beg
Explanation:
The same thing happened in pressure cooker but the temperature inside is most higher.
hope you like my answer
thank you
Because cooking reactions speed up at a higher temperature also the boiling temperature of water increases and hence, the food cooks faster.
source:
https://www.vedantu.com/question-answer/a-pressure-cooker-reduces-cooking-time-for-food-class-9-chemistry-cbse-5feaba32e9fb3d3419e4a61a
How does climate change?
Answer:
Con el cielo del agua
Explanation:
espero que te ayude
A 260-kg object and a 560-kg object are separated by 3.10 m. (a) Find the magnitude of the net gravitational force exerted by these objects on a 49.0-kg object placed midway between them.
C is the correct answer:))))))))
A single paragraph can be selected by triple in the paragraph. ture or false
Answer:
The answer for the question should be True
The passage of a wave through a medium is...?
Answer:
Transmission
Explanation:
It’s the passage of electromagnetic waves through a medium.
The passage of a wave through a medium is known as transmission.
What is the transmission of a wave?The transmission of waves may be characterized as a wave traveling through a medium or into a new medium. Not all waves transmit through the same materials. It significantly depends on the type of wave, the type of material, and even the frequency of the wave.
Transmission is generally the passage of electromagnetic radiation through a medium. While Reflection is the process by which electromagnetic radiation is returned either at the boundary between two media (surface reflection) or at the interior of a medium (volume reflection).
Waves can go through things. Waves go through water, light can pass through the glass, and sound can pass through walls. The material the wave passes through is called a medium. A single disturbance passing through a medium is called a pulse.
Therefore, the passage of a wave through a medium is known as transmission.
To learn more about the Transmission of the wave, refer to the link:
https://brainly.com/question/27844842
#SPJ6
Christianity's aim is to produce
Answer:
Christianity is an Abrahamic, monotheistic religion based on the life and teachings of Jesus, Christians believe that God created the Earth and everything that lives on it.
Explanation:
Or something related like this but the point is christianity was based in the belief of god and spread it by their words and the methods they had.
organize the three states of matter from least kinetic energy to greatest kinetic energy
Particle arrangement and movement
⇒ In terms of relative energy, gas particles have the most energy, solid particles have the least energy and liquid particles are somewhere in between. (All compared at the same temperature.)
- BRAINLIEST answerer
ПОМОГИТЕ ПЖЖППЖЖППЖЖПЖЖПЖПЖПЖ ООООООЧЕНЬ СРОЧНО!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! С ДАНО И РЕШЕНИЕМ!!!!!!
4. У сталевій коробці
масою 250 г
розплавляють 100 г
свинцю. Яка кількість
теплоти витратилася
на теплові процеси,
якщо початкова
температура тіл
становила 27 °С?
Answer:
thanks for the points dia
knives, axe ,blades and nails are examples of
knives, axe ,blades and nails are examples of potential energy
or sharp objects
Why did humans first develop culture?
A. It helped humans distinguish themselves from wild animals.
B. It helped humans become the dominant species on Earth.
C. It helped the members of a society survive in their environment.
D. It helped individuals survive without the support of a society.
SUBMIT
Answer: C.
Correct me if I'm wrong.
2. Conner flips a coin up in the air (to determine if he or his sister needs to do the dishes) at an upward velocity of 4.00 m/s. He fails to catch it on the way down and it falls down an additional 1.6 m to the floor. Calculate the maximum height and maximum magnitude (could be positive or negative) velocity of the coin.
Answer:
5.6
Explanation:
Not so sure
7. A 1.00 kg mass is connected to a spring with a spring constant of 9.00 N/m. If the initial velocity is 4.00 cm/s and the initial displacement is 0.00 cm, then A) what is the maximum spring potential energy of the simple harmonic motion
At the equilibrium position of the spring, the mass has kinetic energy
1/2 (1.00 kg) (0.0400 m/s)² = 0.000800 J = 0.800 mJ = 800 µJ
and when the spring is maximally compressed, this kinetic energy is converted into potential energy.
The maximum spring potential energy of the simple harmonic motion is approximately 7.48 millijoules.
To find the maximum spring potential energy (Us) in simple harmonic motion, we need to determine the maximum displacement (A) of the mass from its equilibrium position.
In simple harmonic motion, the maximum displacement is equal to the amplitude of the oscillation.
The formula for maximum displacement (A) is given by:
A = v0 / ω
where v0 is the initial velocity (4.00 cm/s) and ω is the angular frequency of the oscillation.
The angular frequency (ω) is given by:
ω =[tex]\sqrt{(k / m)[/tex]
where k is the spring constant (9.00 N/m) and m is the mass (1.00 kg).
Substitute the values:
ω = [tex]\sqrt{(9.00 N/m / 1.00 kg)} = \sqrt{9.00 rad/s[/tex] ≈ 3.00 rad/s
Now, calculate the maximum displacement:
A = 4.00 cm/s / 3.00 rad/s ≈ 1.33 cm
Next, calculate the maximum spring potential energy:
Us =[tex](1/2) * k * A^2[/tex]
Us = (1/2) * 9.00 N/m * [tex](1.33 cm)^2[/tex]≈ 7.48 mJ
To know more about spring potential energy, here
brainly.com/question/29510087
#SPJ2
--The compleete Question is, A 1.00 kg mass is connected to a spring with a spring constant of 9.00 N/m. If the initial velocity is 4.00 cm/s and the initial displacement is 0.00 cm, then what is the maximum spring potential energy of the simple harmonic motion--
HELP ME PLEASE I DONT GET THIS
A grinding wheel is a uniform cylinder with a radius of 8.50 cm and a mass of 0.380 kg. Calculate (a) its moment of inertia about its center, and (b) the applied torque needed to accelerate it from rest to 1750 rpm in 5.00 s. Take into account a frictional torque that has been measured to slow down the wheel from 1500 rpm to rest in 55.0 s.
Hi there!
(A)
A grinding wheel is the same as a disk, having moment of inertia of:
[tex]I = \frac{1}{2}MR^2[/tex]
Plug in the given mass and radius (REMEMBER TO CONVERT) to find the moment of inertia:
[tex]I = \frac{1}{2}(0.380)(0.085)^2 = 0.00137 kgm^2[/tex]
(B)
We can use the rotational equivalent of Newton's Second Law to calculate the needed torque:
Στ = Iα = τ₁ - τ₂
Begin by solving for the angular acceleration. Convert rpm to rad/sec:
[tex]\frac{1750r}{min} * \frac{1 min}{60 s} * \frac{2\pi rad}{1 r} = 183.26 rad/sec[/tex]
Now, we can use the following equation:
ωf = wi + αt (wi = 0 rad/sec, from rest)
183.26/5 = α = 36.65 rad/sec²
τ = Iα = 0.0503 Nm
Since there is a counter-acting torque on the system, we must begin by finding that acceleration:
[tex]\frac{1500r}{min} * \frac{1 min}{60 s} * \frac{2\pi rad}{1 r} = 157.08 rad/sec[/tex]
ωf = wi + αt
-157.08/55 = α = -2.856 rad/sec²
τ₂ = Iα = 0.0039 Nm
Now, calculate the appropriate torque using the above equation:
[tex]\Sigma\tau = \tau_1 - \tau_2[/tex]
[tex]\Sigma\tau + \tau_2 = \tau_1[/tex]
[tex]0.0503 + 0.0039 = \large\boxed{0.054 Nm}[/tex]
cuantos metros hay en 100cm?
Answer: 100cm = 1 meter.
Centi is 100, therefor meaning that 100cm is exactly 1 meter.
I hope this helps!
tính các mô men quán tính chính trung tâm của tiết diện, cho biết a = 10cm
Answer:
i dont know need points
Explanation:
A 67 kg soccer player uses 5100 kJ of energy during a 2.0 h match. What is the
average power produced by the soccer player?
The average power produced by the soccer player is 710 Watts.
Given the data in the question;
Mass of the soccer player; [tex]m = 67kg[/tex]Energy used by the soccer player; [tex]E = 5100KJ = 5100000J[/tex]Time; [tex]t = 2.0h = 7200s[/tex]Power; [tex]P =\ ?[/tex]
Power is simply the amount of energy converted or transferred per unit time. It is expressed as:
[tex]Power = \frac{Energy\ converted }{time}[/tex]
We substitute our given values into the equation
[tex]Power = \frac{5100000J}{7200s}\\\\Power = 708.33J/s \\\\Power = 710J/s \ \ \ \ \ [ 2\ Significant\ Figures]\\\\Power = 710W[/tex]
Therefore, the average power produced by the soccer player is 710 Watts.
Learn more: https://brainly.com/question/20953664
A solid sphere starts from rest and rolls down a slope that is 6.4 m long. If its speed at the bottom of the slope is 5.3 m/s, what is the angle of the slope
From the relationship between acceleration a and g on an inclined plane, the angle of the slope is 13 degrees
Given that a solid sphere starts from rest and rolls down a slope that is 6.4 m long. The speed at the bottom of the slope is 5.3 m/s, the distance travelled is 6.4 m. That is,
Initial velocity U = 0 ( since it starts from rest)
Final velocity V = 5.3 m/s
distance S = 6.4 m
Let us first calculate its acceleration by using third equation of motion.
[tex]V^{2}[/tex] = [tex]U^{2}[/tex] + 2aS
[tex]5.3^{2}[/tex] = 0 + 2 x 6.4a
28.09 = 12.8a
a = 28.09 / 12.8
a = 2.2 m / [tex]s^{2}[/tex]
To calculate the angle of the slope, let us use the relationship between acceleration a and g on an inclined plane.
acceleration a = gsin∅
substitute all the relevant parameters
2.2 = 9.8 sin∅
sin∅ = 2.2/9.8
sin∅ = 0.224
∅ = [tex]Sin^{-1}[/tex](0.224)
∅ = 12.97 degrees
∅ = 13 degrees (approximately)
Therefore, the angle of the slope is 13 degrees
Learn more about inclined plane here: https://brainly.com/question/25845680
Three point charges are placed on the y-axis: a chargeqaty=a,a charge-2qat the origin, and a chargeqaty= -a.Such an arrangement is called an electricquadrupole.(a) Find the magnitude and direction of the electric field at points on thepositive x-axis. (b) Use the binomial expansion to find an approximate expression for the electric field valid for x >> a.Contrast this behavior to that of the electric field of a point charge and that of the electric field of a dipole.
Heat is transferred from molecules with more kinetic energy to molecules with _________kinetic energy.
Answer:
less
Explanation:
heat travels from hotter to colder object. hotter object has more kinetic energy.
What is 1 radian approximately in degrees?
Answer:
180 LUV:)
Explanation:
A weather forecaster uses a computational model on a Monday to predict the weather on Friday. Why might that forecast change? (1 point)
A. The forecaster may have done the calculations a second time because he made a mistake in the calculation.
B. Someone may have reported the weather incorrectly before the first computation.
C. The forecaster may have had the computer model do the calculations a second time, and he found that the prediction changed.
D. An area of low pressure might move more quickly on Tuesday and Wednesday than expected.
Answer:
D. An area of low pressure might move more quickly on Tuesday and Wednesday than expected.
Explanation:
I took the test and got it wrong :/
What are some physical factors we deal with for sleeping?
Answer:
we deal our body movement during sleeping
The Air Force is F 22 raptor fighter jets mass is 21,000 KG the F 22 is flying at a height of 26,000 miles what is its gravitational potential energy
Answer:
5460000000 J OR 5460000 KJ
Explanation:
GPE = mgh
21000*10*26000
=5460000000J OR 5460000KJ