Element X has 2 following stable isotopes, X-23 (relative abundance 41.9%) and X-25 (relative abundance is [100-41.9]%). What is the average atomic mass of Element X? Record the numerical answer to the hundredths place (2 places after the decimal).
Isotopes : the same atomic number, but different mass numbers
Atomic mass is the average atomic mass of all its isotopes
avg atomic mass = m1.%m1 + m2.%m2....mn.%mn
You did not include the mass of each isotope
Element X :
X-23 = 41.9%
X-25 = 58.1%
The average atomic mass of Element X :
[tex]\tt =0.419\times mass~X-23+0.581\times mass~X-25[/tex]
What happens during an El Nino event?
o
All of the Above
Droughts and Tropical Storms are stronger
O
The water of the Pacific Ocean gets warmer
O
The trade winds reverse the direction they normally blow in
For problems 1-9, use rectangle QUAD. Treat each problem independently
The value of DP in the rectangle QUAD can be gotten by equating DP and DA which will be 17 units.
How to solve the rectangle?From the complete question, DP = 4x + 1, and PA = x + 13. In this case, the value of DP will be calculated thus:
DP = DA (property of rectangle)
4x + 1 = x + 13
Collect like terms
4x - x = 13 - 1
3x = 12
Divide both side by 3
3x/3 = 12/3
x = 4
Therefore, DP will be:
= 4x + 1
= 4(4) + 1
= 16 + 1 = 17
Learn more about rectangles on:
https://brainly.com/question/25292087
who was the first person to create the periodic table
Answer:
Dmitri Ivanovich Mendeleev
Explanation:
A Russian chemist Dmitri Ivanovich Mendeleev gave the framework of the periodic table in 1869
Answer:
the first person was Dimitri mendeleev
Sharing or transfer of electrons from one atom to the other to attain stable octet
configuration follows
————-theory
Select one:
O a. Einstein's
O b.
Bohr's
O c. Newton's
O d. Candella's
Please help me with this question
Answer:
C newton's..................
Based on your answer in part F, what must happen to the sodium acetate for it to dissolve in the water again? Safely test your method using only those materials available in the equipment list. Does the sodium acetate dissolve again with your chosen method?
When sodium acetate is dissolved in water, it is hydrolyzed into ions.
What happen when sodium acetate dissolved in water?When a salt of weak acid or base is dissolved in water, this salt hydrolysis in it. Water ionises into hydroxide and hydrogen due to addition of sodium acetate. In water, sodium acetate splits into sodium and acetate ions.
So we can conclude that when sodium acetate is dissolved in water, it is hydrolyzed into ions.
Learn more about dissolve here: https://brainly.com/question/12983022
No question, just wanted to know how y'all doing.
Answer:
Ello and im good
Explanation:
Answer:
Hello good how are you
Explanation:
What occurs during a solar eclipse?
Earth is closest to the Sun.
There are small tides across Earth.
The moon’s shadow falls on Earth.
The moon is covered in Earth’s shadow.
Answer:
Explanation:
option C is correct
Answer:
The moon is covered in Earth’s shadow.
Explanation:
When the moon goes behind the earth to the shadow it becomes a solar eclipse.
PS, Can you mark me brainlyest please.
What is the Atomic weight Of Neon/ Ne in elements.
Answer:
20.1797 u or g/mol
Explanation:
I looked it up.
SOMEONE PLEASE HELP LIKE ASAP ITS DUE IN A COUPLE MINUTES AND I MARK BRAINLIEST
first one: like charges
second one: opposite charges
third one: opposite charges
fourth one: opposite charges
yw :)
There are well over 100 __________________ that exist on Earth
Answer:
species like plants, animals , human etc
Answer:
Dogs, Chocolate, Tvs, Phones.
Explanation:
What causes the move from one era to another era?
Answer:
most likely climate changes and or mass extinction
Explanation:
Answer:
Look below
Explanation:
Climate changes.
an element (gas) used to make colorfully lit advertising signs
Neon element which is in gaseous form is used in lit advertising signs as it emits reddish orange glow on passage of current through it.
What is an element?It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.
Learn more about elements,here:
https://brainly.com/question/1812430
#SPJ2
A pipet is used to transfer 5.00 mL of a 1.25 M stock solution in flask "S" to a 25.00-mL volumetric flask "B," which is then diluted with DI H2O to the calibration mark. The solution is thoroughly mixed. Next, 3.00 mL of the solution in volumetric flask "A" is transferred by pipet to a 50.00-mL volumetric flask "B" and then diluted with DI H2O to the calibration mark. Calculate the molarity of the solution in volumetric flask "B."
Answer:
The answer is "0.015 M ".
Explanation:
[tex]M_1 = 1.25 \ M\\\\M_2 = M_2\\\\V_1 = 5.00 \ mL\\\\V_2 = 25.00 \ mL \\\\\bold{\text{Formula:}}\\\\\to M_1 \times V_1 = M_2\times V_2\\\\\to M_2 = \frac{ M_1 \times V_1}{V_2}\\\\=\frac{( 1.25 \times 5.00 )}{ 25.00}\\\\=\frac{( 6.25 )}{ 25.00}\\\\= 0.25 \ M \\\\[/tex]
If the volume [tex]V_2 = 3.00 \ mL[/tex]
[tex]M_3=M_3 \\\\V_3 = 50.00 \ mL\\[/tex]
Formula:
[tex]M_3 = \frac{M_2 \times V_2}{V_3}[/tex]
[tex]= \frac{ 0.25 \times 3.0}{50.0}\\\\ = \frac{ 0.75}{50.0}\\\\ = 0.015 \ M \\\\[/tex]
how many grams are there in 0.6 moles of beryllium iodide, Bel2?
Convert mole to gram multiply it by the molar mass of BeI2
BeI2 molar mass = 262.8122g
0.6 moles x 262.8122g = 157.68g BeI2
1.8 L of a 2.4M solution of NiCl2 is diluted to 4,5 L. What is the resulting concentration of the diluted solution?
an object with a mass of 40g has a volume of 80cm3.will the object float or sink in water? why?
Show the reaction : Phenol to benzene
The reaction is given by
[tex]\\ \rm\Rrightarrow C_6H_5OH+Zn\longrightarrow C_6H_6+ZnO[/tex]
Answer:
See below ~
Explanation:
Can some inherited traits be changed by an organism's environment?
Some inherited traits can be changed by an organism's environment because environment has a direct impact on organisms.
Can inherited traits be changed by environment?Traits allow a plant, animal, or other organism to survive and reproduce in its environment which is known as adaptations. Natural selection occurs when there is some variation in the inherited traits of organisms within a species.
So we can conclude that some inherited traits can be changed by an organism's environment because environment has a direct impact on organisms.
Learn more about environment here: https://brainly.com/question/17413226
DEFINE -_-
ATOMIC MASS
&
MOLECULAR MASS
Answer:
atomic mass is the mass of an atom compared to that of carbon 12 isotope while molecular mass is the mass of a given molecule
Explanation:
Water, H20, is a molecule made of oxygen and hydrogen. The bonds that hold water
bonds.
molecules together are due to shared electrons, and known as _______ bonds
Answer:
the answer is convalent bonds
Explanation:
Strong linkages—called covalent bonds—hold together the hydrogen (white) and oxygen (red) atoms of individual H2O molecules. Covalent bonds occur when two atoms—in this case oxygen and hydrogen—share electrons with each other.
i hope this helped
how does energy transfer from computer to speaker plz help fasttt
Answer:
As the coil moves through the magnetic field, created by the magnet, an electric current flows through it. The electric current flows out from the microphone to a computer or other recording device, and you can hear it. Aspeaker works in almost the same way, except that the process isreversed.
How does heat transfer? *
cold object to cold object
cold object to hot object
hot object to cold object
hot object to hot object
Answer:
hot object to cold object
2. How have observations of the natural world helped
in the development of calendars?
Answer:
just wanted points
Explanation:
i wasted your time srry
Anyone know the answer to this question
Answer:
Construction
Explanation:
A rod of iron of uniform density has a thickness such that a one-inch-long segment of it weighs 3. 88 ounces. Given that there are 0. 035273 ounces in a gram and 2. 54 centimeters in an inch, how many grams would a 14. 79 cm length of the same iron rod weigh? a. 73. 30 g b. 274. 49 g c. 640. 51 g d. 1,626. 89 g.
The number of grams of iron present in 14.79 cm length of the same iron rod is 640.51 g.
What is ounces?Ounces is a unit of mass which is used to define a very little amount of anything.
In the question, given that:
In one inch of iron rod whose weighs is 3.88 ounces = 2.54 cm long
In 1 g = 0.035273 ounces present
So we can calcuylate the number of grams in which 3.88 ounces present as:
x = (3.88 ounces) / (0.035273 ounces/g)
x = 110g
So, in 110g = 3.88 ounces present
And in 2.54 cm = 110g of iron present
In 14.79 cm, present grams of iron can be calculated as:
y = (14.79cm x 110g) / 2.54cm
y = 640.51 g
Hence option (c) is correct i.e. 640.51 g.
To know more about ounces, visit the below link:
https://brainly.com/question/24505595
The weight of the iron rod with 14.79 cm length with same density is given by: Option C; 640.51 g
How are density, volume and mass of a substance related?Suppose that a finite amount of substance is there having its properties as:
mass of substance = m kgdensity of substance = d kg/m³volume of that substance = v m³Then, they are related as:
[tex]d = \dfrac{m}{v}[/tex]
We know that:
1 ounce = 28.3495 g approxNow, from the facts given in the problem, we have:
The weight of first iron rod which is one inches long = 3.88 ounces
The new rod is 14.79 cm long. And 1 cm = 0.3937 inches approx, thus the new rod is: [tex]14.79 \times 0.3937 \approx 5.8228 \: \rm inches[/tex]
As for 1 inch long rod, there is weight of 3.88 ounces, thus:
for 5.8228 inch rod, the weight of the rod would be [tex]5.8228 \times 3.88 \approx 22.5924 \: \rm ounces[/tex]
And since 1 ounce = 28.3495 g approx
Thus, weight of the new rod in grams would be [tex]22.5924\times 28.3495 \approx 640.485 \approx 640.51\: \rm g[/tex]
Thus, the weight of the iron rod with 14.79 cm length with same density is given by: Option C; 640.51 g
Learn more about density here:
https://brainly.com/question/952755
A solution is prepared with 3. 26 g KCl and water to make 25. 0 mL of KCl. What is the % (m/v) of the KCl solution
Answer:
13.04%
Explanation:
m/v = g/mL *100 = 3.26/25*100
Which method of finding slope do you prefer? Why?
(slope formula, table, other)
how to create a particle model that would be more dense than a depicted one?
Answer:
make the particles close together (eg a solid is more dense than liquids as it has a fixed shape)
What is
metal refinning
Answer:
It is the way of cleaning of impurities present in metals