Answer:
fractional distillation leads to better separation
A student was performing paper chromatography and let the separation continue overnight. The
A student was performing paper chromatography and let the separation continue overnight. The student wished to determine if the mixture contained a substance with an RF factor of 0.343 where:
Rf = (distance travelled by the component)/(distance travelled by the solvent)
a) What data would be affected by this error?
b) Explain the effect on the calculated Rr.
Based in the information given, the data that'll be affected by the error is the value of the solvent data.
It should be noted that the data that'll be affected based on the scenario given is the value of the solvent. When the preparation is kept overnight, there'll be an overflow of the solvent.
In such a case, it'll be difficult to get the correct distance that the solvent travelled. The effect on the calculated Rr is that the calculated Rr will be incorrect due to the error in solvent value.
Read related link on:
https://brainly.com/question/25715980
Which element has 1 valence electron in its outer shell and will react with a
group 17 element in a 1:1 ratio?
Answer:
sodium (Name) and Chlorine (Cl)
Explanation:
Any of the Group 17 elements (the halogens) only need one additional electron to take on the electron configuration of the noble gas just to it's right. That would be argon (Ar) in this case.
For this reaction, the needs of both elements (to reach a stable Group 17 electron configuration) is matched: Just one electron is provided (Na) and taken (Cl) and that forms a single bond
Which is the stereochemical relationship between this pair of molecules?.
Answer:
enantiomers
Explanation:
hope this helps :)
brainliest plzz
Many plant cells have chloroplasts. Which process occurs in chloroplasts?
photosynthesis
respiration
food storage
reproduction
Answer:
photosynthesis
Explanation:
chloroplasts store sugar which is needed for photosynthesis
Someboyd please helppppppp!!!
Sodium: Na+
Iron (II): Fe2+
Iron (III): Fe3+
Titanium (IV): Ti4+
Vanadium (V): V5+
Ammonium: NH4+
I hope this helps! :)
Shanika is an engineer at an amusement park who is experimenting with changes to the setup for a magnetic roller coaster ride. In one ride, there are two identical roller coaster cars (orange and green) that start on opposite sides of a large magnet located at the center of a station. Shanika wants to get the largest increase in potential energy she can by moving one car one space to the left or the right. Shanika can move the orange car to point A or point B, or she can move the green car to point C or point D. Which movement should she make? Why will that movement result in the largest increase in potential energy? Describe the magnetic force that will act on the roller coaster car she moves. What should I do for the Green cart?
The orientation of the poles of the magnet on the cars and the large
magnet are like poles.
The correct responses are;
First question
Move the orange car from A to B Move the green car from D to CSecond question:
The reason is reducing the distance increases the magnetic field strengthThird question:
It pushes the cars away in the opposite direction.
Fourth question:
Place the green car at point C to get the largest potential energyReasons:
Potential energy is the energy an object has due to its location.
Energy is a product of force and distance, and therefore, if the force,
experienced by the object increase, the potential energy of the object
increases.
The strength of a magnetic field, B, is given by the formula;
[tex]\displaystyle B = \frac{\mu_0 \cdot I}{2 \cdot \pi \cdot d}[/tex]
Where;
B = The magnetic field strength
I = Current
d = The distance from the source of the magnet
μ₀ = The permeability of free space = 4·π × 10⁻⁷ T m/A
Therefore, the strength of the magnet is higher closer to the source.
First question
In a magnet, like poles push each other back, and given that the poles of the magnet adjacent to each other are like poles, to get the largest increase in she should move the cars towards the large magnet.
Move the orange car from A to B Move the green car from D to CSecond question:
The reason why the movement will result in the largest increase in potential energy is because like polls repel each other and the strength of a magnetic field increases closer to the magnet
Third question:
The magnetic force that will act on the roller coaster car moved towards the large magnet, pushes the car in the opposite direction.
Fourth question:
The green cart should be moved from point D to point C to get the largest potential energy
Learn more here:
https://brainly.com/question/1975438
- A beam of electrons has.....
(A) Wave properties.
(B) Particle properties.
(C) Both of these
(D) Neither of these
Answer:
(C) Both of these
Explanation:
A beam of electrons has both of these Wave properties and Particle properties.
discuss the solubility differences between the halogens and the halides in both hexane and water. be sure to define what a halogen and halide are to foundation your discussion.
Halides are ionic substances while halogens nonpolar substances. Hence, halides dissolves in water while halogens dissolve in hexane.
A halogen is an element in group seventeen. The name halogen means salt former. This name came about because many of the halogens form salts. Halides are salts formed by the halogens.
Halogens are diatomic covalent molecules. As such, they are nonpolar molecules and can only effectively interact with nonpolar solvents. Benzene is a nonpolar solvent hence it acts as an effective solvent for the halogens.
The halides are polar compounds hence they do not dissolve in nonpolar solvents such as hexane. Rather, halides dissolve in polar solvents such as water due to dipole - dipole interaction between the ions in the halide and the dipoles in water.
Learn more: https://brainly.com/question/6505878
What is the role of cellular respiration in organisms?
to provide energy for photosynthesis
to provide energy for breaking apart fuel molecules
to provide energy for making oxygen
to provide energy for cell activity
Answer:
C. sorry if I'm wrong ...................
why are water-soluble vitamins less likely to be toxic compared to fat-soluble vitamins?
Answer:
Water-soluble vitamins are not stored in the body and are excreted in the urine quickly. Unlike water-soluble vitamins, fat-soluble vitamins are dissolved in fat and an excess of them would lead to toxicity if consumed in large amounts because it would lead to rancidity, and they are not easily excreted by urine like water-soluble vitamins.
Even when consumed in high doses, water-soluble vitamins are less likely to create problems since they are eliminated through urine rather than stored.
What are vitamins?Vitamins are defined as a collection of molecules required for healthy cell growth, development, and function. While some vitamins support healthy neurons and infection resistance, others may aid in correct blood clotting or food energy absorption.
Water-soluble vitamins are promptly eliminated in the urine and are not retained by the body. In contrast to water-soluble vitamins, which are easily eliminated by urine, fat-soluble vitamins are dissolved in fat. If ingested in excess, they can be harmful due to rancidity and cannot be easily expelled through urine.
Thus, even when consumed in high doses, water-soluble vitamins are less likely to create problems since they are eliminated through urine rather than stored.
To learn more about vitamins, refer to the link below:
https://brainly.com/question/24324739
#SPJ2
Vanadium crystallizes in a body-centered cubic lattice, and the length of the edge of a unit cell is 305 pm. What is the density of V
Answer:
5.96 g/cm^3
Explanation:
Corner atom = 1/8
Atoms in center = 1
Atoms in face of the cube= 1/2
Molar mass of V = 50.94 g/mol (from period table)
1 mole = 6.02x10^23
In BCC unit cell:
(8 x 1/8)+ 1=2 per 1 unit cell
Mass: 2(50.94g)/6.02x10^23 = 1.69x10^-22 g/unit cell
305pm=(305x10^-12m÷10^-2m) x (1mL÷1cm^3)
= 2.837 x 10^-23 mL
1pm=10^-12m
1cm=10^-2m
1mL=1cm^3
density=mass/volume
density of V = 1.69x10^-22g÷2.837x10^-23mL
=5.957g/mL
=5.96g/cm^3
Complete the sentence.
Atoms form chemical bonds to satisfy the ______
rule and to become _______
How could investigating what happens to the air getting warmed up near the ground help us explain some of the mechanisms that lead to hailstorms?
Answer:
Hailstones are formed when raindrops are carried upward by thunderstorm updrafts into extremely cold areas of the atmosphere and freeze.
so i'm gonna guess and say that it does not matter because the rain drops freeze in the atmosphere in a cold place.
Explanation:
BRAINLIEST?Hailstones are formed when raindrops are carried upward by thunderstorm updrafts into extremely cold areas of the atmosphere and freeze.
what is atmosphere ?An atmosphere is defined as a blanket of gases that surrounds Earth which held near the surface of the planet by Earth’s gravitational force of attraction.
Argon, oxygen and nitrogen from the three main constituents of the atmosphere, it Helps to retain the sun’s heat and prevents it from escaping back into space, Protects life from harmful radiation, Plays a major role in Earth’s water cycle.
The atmosphere has five distinct layers which are determined by the changes in temperature and it happen with increasing altitude. Layers of Earth’s atmosphere are divided into five different layers as Exosphere
Thermosphere, Mesosphere, Stratosphere, Troposphere
For more details regarding atmosphere , visit
https://brainly.com/question/24747263
#SPJ2
1. (8.5d) A compound has a formula Mg:(PO.). Which best describes the atoms that make up this compound?
A.
B.
Atom
Magnesium (Mg)
phosphorus (0)
Oxygen (0)
Number
2
1
4
Atom
Magnesium (Mg)
Phosphorus (P)
Oxygen (0)
Number
6
2
8
C.
Atom
Magnesium (M)
Phosphorus (2)
Oxygen (0)
Number
3
4
2
D.
Atom
Magnesium (Mg)
Phosphorus (P)
Oxygen (0)
Number
3
2
8
Answer:(8.5d) A compound has a formula Mg:(PO.). Which best describes the atoms that make up this compound? A. B. Atom Magnesium (Mg) phosphorus (0) Oxygen (0)
Explanation:
8. Why are we focusing on high levels of ozone in the troposphere in this lab while in Lab 2 (Stratospheric Ozone) we focused on low concentrations of ozone in the stratosphere?
Answer:
f4
Explanation:
your welcome.
Which of the following is considered quantitative data?
A. Appearance
B. Smell
C. Temperature
Answer:
Temperature
Explanation:
This is because quantitative data include numerical values for example 10 degrees Celsius. However the others are qualitative data because the research can be described but not with numbers like your appearance is very nice.
Hope this helps :P
Answer:
Quantitative data is the type of data whose value is measured in the form of numbers or counts, with a unique numerical value associated with each data set. Also known as numerical data, quantitative data further describes numeric variables (e.g. How many? How often? How much?)
Explanation:
so its temp
What will be the product or products if zinc (Zn) reacts with hydrochloric acid (HCl)?.
The products of the reaction are Zinc chloride (ZnCl₂) and Hydrogen gas (H₂)
From the question,
We are to determine the product or products when zinc (Zn) reacts with hydrochloric acid (HCl)
To determine the product or products, we will write the chemical equation for the reaction.
The balanced chemical equation for the reaction is
Zn + 2HCl → ZnCl₂ + H₂
Hence, the products of the reaction are Zinc chloride (ZnCl₂) and Hydrogen gas (H₂)
Learn more here: https://brainly.com/question/17716543
In what respect does 3s sub-Shell differ from 4s sub-shell?
Answer:
in the energy and in the principal quantum number (n)
Explanation:
the energy of 3s sub-shell is less than 4s sub-shell
and the principal quantum number of 3s sub-shell (n)= 3 but the principal quantum number of 4s sub-shell (n) = 4
Guys I need help please! Do not scam me ok? Thanks:). Please take a screenshot and send thanks.
Answer:
thx for the points
Explanation:
no need brainliest
Write and balance chemical reactions for the following reactions and name the reaction type:
a. Solid sodium oxide reacts with water to form sodium hydroxide
b. Solid aluminum metal reacts with aqueous zinc chloride.
c. C3H8 (g) + O2 (g) --->
2. Describe the three main types of radioactive decay and their properties.
Answer: The reaction of 1 mol of C to form carbon monoxide in the reaction 2 C(s) + O2(g) ( 2 CO(g) releases 113 kJ of heat. How much heat will be released by the combustion of 100 g of C according the the above information? According to the balanced chemical equation;
Explanation:
If I am calculating the volume in pv=nrt
Then, how do I know what units it is in coz normally it would be m3 but how do I know that it's not dm3
Explanation:
If you use the SI units for P, n, R and T ( In Pa, mol, JK-1mol-1 and K respectively) you'll end up with a Volume with m3 units. So if you have others in different units first convert them into the units I mentioned above and you will definitely get the answer in m3.
Nitrogen will ____ valence electrons when forming an ionic bond.
renal calculi contain crystallized calcium, magnesium, and uric acid. explain why patients with hyperparathyroidism would be at risk for developing renal calculi.
Patients with hyperparathyroidism would be at risk for developing renal calculi because of high calcium levels excreted by the kidney.
Hyperparathyroidism occurs when there is over secretion of parathyroid hormone by the parathyroid glands.
The parathyroid hormone is responsible for the following in the body:
Release of calcium by bones into the bloodstream. Absorption of calcium from food by the intestines, and Conservation of calcium by the kidneys.Renal calculi are strong masses of stones deposited in the kidneys or urinary bladder.
When there is excess calcium in the blood due to hyperparathyroidism, the kidneys would be over burdened with the excretion of excess calcium.
That extra calcium in the kidney & the urine leads to kidney stone development ( renal calculi).
Therefore, patients with hyperparathyroidism would be at risk for developing renal calculi because of high calcium levels excreted by the kidney.
Learn more here:
https://brainly.com/question/24153052
Which of the following is NOT a conductor of heat?
A. a plastic pot handle
B. a copper pan
C. a metal spoon
A) A plastic pot handle.
Explanation:Metals are very good conductors of heat because they contain delocalised electrons that can flow through the metal, transferring heat.
Both a copper pan and a metal spoon are made of metals, so are very good conductors of heat.
Plastic is an insulator, the opposite of a conductor. This makes it very bad at conducting heat, which is why it is used as the handle (it stops you burning yourself when you hold the pot). The answer is therefore A.
Explain how magnesium is produced at the negative electrode from molten magnesium chloride
Answer:
being cation it migerates to cathode to be reduced to elemental magnesium
Explanation:
Mg+2. +2e -----------Mg
Calculate the molecular mass of the element
They give:H=1,AI=27,S=32,0=16,Cu=64,P=31,Mg=24,N=14,Na=23
Answer:
Al2 (SO4)3
2×27 + 3×(32+ 4×16)
54 + 3×(32+ 64)
54+ 3×(96)
54+ 288
=342g
BRAINLIST PLS
an atom with 3 protons that loses an electron becomes…
Answer:
A +1 Ion of Lithium
Explanation:
Lithium has the atomic number of 3, therefore it has 3 protons
An electron has a negative charge, so losing an electron gives an atom a positive charge.
Answer:
Positive 1 ion of lithium
Explanation:
hope this helps!
Please help I’m soo confused what do you think might account for these similar properties? Explain
Answer:
i wonder...................
Explanation:
what is the answer ??z???????
Answer:
Females
Explanation:
Hope that helps
Answer:
The answer may be no characters
If I'm right or wrong plz reply to me
I just need help. Help help help
Answer:
my bro what is the question first ?
Explanation: