The sound intensity, or sound power, decreases by a factor of nine (9) when the distance to the source triples.
What is sound intensity?Sound intensity is the rate of energy transfer per unit area and per unit time in the form of sound waves. It can be measured in units of watts per square meter (W/m2). Sound intensity is proportional to the square of the sound pressure level and is inversely proportional to the distance from the source. Sound intensity decreases with increasing distance from the source and increases with the sound pressure level.
This is due to the inverse-square law, which states that the sound intensity decreases inversely proportional to the square of the distance from the source. This means that as the distance from the source increases, the sound intensity decreases by the square of that distance. In this case, when the distance is tripled, the sound intensity decreases by a factor of nine (9).
To learn more about sound intensity
https://brainly.com/question/17062836
#SPJ4
Which one of the following properties most fundamentally distinguishes mechanical waves from electromagnetic waves? Mechanical waves have crests and troughs | Mechanical waves require a medium for propagation. | Mechanical waves have well-defined wavelengths. | Mechanical waves move at a finite speed.
The property that most fundamentally distinguishes mechanical waves from electromagnetic waves is that mechanical waves require a medium for propagation.
What are mechanical waves?
Mechanical waves are waves that require a medium in order to travel. Examples of mechanical waves are sound waves, seismic waves, and surface waves. These waves are created by a vibrating object, and the energy created is transferred through the medium, such as air or water.
The vibrations create compression and rarefaction regions, and these pressure changes travel away from the source. Mechanical waves are classified as either longitudinal or transverse. Longitudinal waves involve the particles of the medium vibrating in the same direction as the wave travels. Examples of this type of wave are sound waves. Transverse waves involve the particles of the medium vibrating at right angles to the direction in which the wave travels. Examples of this type of wave are ocean waves.
The property that most fundamentally distinguishes mechanical waves from electromagnetic waves is that mechanical waves require a medium for propagation.
Mechanical waves are waves that travel through a material medium, such as a solid, liquid, or gas, by causing particles in the medium to vibrate and transmit energy from one point to another.
On the other hand, electromagnetic waves do not require a medium and can travel through a vacuum, such as in space. Electromagnetic waves are waves of oscillating electric and magnetic fields, which can travel through space at the speed of light.
While mechanical waves do also typically have crests and troughs, well-defined wavelengths, and move at finite speeds, these properties are not unique to mechanical waves and can also apply to electromagnetic waves. For example, electromagnetic waves also have crests and troughs, well-defined wavelengths, and move at a finite speed.
To know more about Mechanical Waves, visit:
https://brainly.com/question/26116832
#SPJ4
is 0.5 a strong correlation?
In most situations, the strong correlation usually ranges between 0.7 to 0.9. So 0.5 is not a strong correlation.
Correlation is an important concept in statics. This helps to associate the relationship between two variables. This is of two types namely positive correlation and negative correlation.
In a positive correlation, the association of two variables occurs in the same way. That is they both decrease or increase. In a negative correlation, the association of one variable occurs oppositely to another variable. That is, when one variable decreases, another variable increases.
This correlation is represented by the symbol r. This r-value range from +1 to -1. So the perfect positive correlation is +1 and the perfect negative correlation is -1.
In, the positive correlation, the values from 0.1 to 0.3 is considered weak or low correlation. The values from 0.4 to 0.6 are considered a moderate correlation and the values from 0.7 to 0.9 are considered a strong correlation.
To know more about correlation:
https://brainly.com/question/22340487
#SPJ4
What is the Value of Mu Naught?
Mu naught, also known as vacuum permeability, is a physical constant that represents free space permeability. Its precise value is 4 x [tex]10^{-7}[/tex] henries per meter (H/m).
This constant appears in several electromagnetic equations, including Ampere's law and the Biot-Savart law. It is essential for calculating magnetic fields around electric currents and comprehending electromagnetic waves.
The value of mu nothing is regarded as a basic constant of nature, which means that it is thought to be the same everywhere in the cosmos and is not anticipated to vary throughout time. Its exact value has been found after multiple studies and measurements and is regarded as one.
Learn more about Naughts at
https://brainly.com/question/30404139
#SPJ4
Mu Naught is a physical constant in Physics, specifically the vacuum permeability or the magnetic constant, with a value of approximately 4π x 10^-7 T·m/A.
Explanation:In Physics, Mu Naught is a physical constant, specifically, the vacuum permeability or the magnetic constant. It is used in various equations and calculations involving magnetically related phenomena. The value of Mu Naught is approximately 4π x 10^-7 Tesla meter per ampere (T·m/A).
For example, it is used in the formula of Biot–Savart law and Ampere’s law, which are essential in calculating the magnetic field generated by electric currents.
Learn more about Mu Naught here:https://brainly.com/question/34609224
A car can accelerate from rest to a speed of 28 m/s in 20 s. What is the average acceleration of the car
Formula for acceleration:
[tex]a=\dfrac{V^f-V^I}{t}[/tex]
acceleration(measured in m/s^2) = Final velocity(measured in m/s) - Initial velocity(measured in m/s) / time(measured in seconds)
__________________________________________________________
Given:
[tex]V^I=0m/s[/tex] (rest)
[tex]V^f=28m/s[/tex]
[tex]t=20s[/tex]
[tex]a=?[/tex]
__________________________________________________________
Finding acceleration:
[tex]a=\dfrac{V^f-V^I}{t}[/tex]
[tex]a=\dfrac{28-0}{20}[/tex]
__________________________________________________________
Answer:
[tex]\boxed{a=1.4m/s^2}[/tex]
two large, charged plates with charge density ± 30 � c / m 2 ±30μc/m 2 face each other with a separation of 5.0 m m 5.0mm. the negative plate is grounded, and defined as 0 potential.
The electric field between the two charged plates is ±1.697 x 10^10 N/C, directed from the positive plate to the negative plate.
Given:
Charge density of each plate = ±30 μC/m^2
Separation between the plates = 5.0 mm = 0.005 m
The negative plate is grounded and defined as 0 potential.
We can calculate the electric field between the plates as follows:
Calculate the surface charge density of each plate. Since the plates are large, we can assume that they are infinite in extent, so we can use the formula:
σ = Q / A
where σ is the surface charge density, Q is the charge on the plate, and A is the area of the plate. Since the plates are oppositely charged and have the same surface charge density, we can calculate the charge on each plate as:
Q = σ * A
The area of each plate is given by:
A = d * w
where d is the distance between the plates and w is the width of the plates (which we assume to be very large). Thus, we have:
A = 0.005 m * ∞ = ∞
Therefore, the charge on each plate is:
Q = σ * A = ±30 μC/m^2 * ∞ = ±∞
Note that the charge is infinite, but we can still calculate the electric field between the plates because we only need to know the charge distribution and not the actual charge.
Calculate the electric field between the plates. Since the plates are oppositely charged, the electric field between them will be uniform and directed from the positive plate to the negative plate. The electric field is given by:
E = σ / (2 * ε0)
where ε0 is the permittivity of free space. Substituting the values, we get:
E = ±30 μC/m^2 / (2 * 8.85 x 10^-12 F/m) = ±1.697 x 10^10 N/C
Note that the electric field is the same magnitude for both plates, but the direction is opposite.
Learn more about electric field here:
https://brainly.com/question/8971780
#SPJ4
what happens to the temperature of the gas during an isobaric expansion?
The temperature of the gas remains constant during an isobaric expansion.
What is the temperature ?The temperature is a measure of the degree of hotness or coldness of an object or an environment. Temperature is usually measured in units of degrees Celsius (°C), Fahrenheit (°F) or Kelvin (K). Generally, temperatures range from low negative values to extremely high positive values. The average temperature on Earth is about 15°C (59°F).
To learn more about temperature
https://brainly.com/question/27944554
#SPJ4
For an isobaric process to occur the temperature of the gas must rise as the volume of gas increases. Since temperature and volume change there is work and internal energy change involved.
Heat enters the system when an isobaric expansion process occurs. The mechanism uses some of the heat to operate on the surroundings, while the remaining heat is used to boost internal energy.
The volume of the gas expands during an expansion process, raising the temperature along with it.
What is the temperature ?The temperature is a measure of the degree of hotness or coldness of an object or an environment. Temperature is usually measured in units of degrees Celsius (°C), Fahrenheit (°F) or Kelvin (K). Generally, temperatures range from low negative values to extremely high positive values. The average temperature on Earth is about 15°C (59°F).
To learn more about temperature
brainly.com/question/27944554
#SPJ4
A regulation basketball has a 46 cm diameter and may be approximated as a thin spherical shell. How long will it take a basketball starting from rest to roll without slipping 4.4m down an incline that makes an angle of 15.4° with the horizontal?
The acceleration of gravity is 9.81m/s^2? Answer in units of s
Answer: 2.2 seconds!
Explanation:
The answer is approximately 2.2 seconds.
To find this, we can apply the equations of motion for a rolling sphere on an incline. Since the ball is starting from rest, its initial velocity is 0 m/s. We also know the angle of inclination (15.4°) and the distance the ball must travel (4.4m).
Using the equations of motion, we can solve for the acceleration of the ball, which is given by:
a = g*sin(θ)
where g is the acceleration due to gravity (9.81 m/s2) and θ is the angle of inclination (15.4°).
So, the acceleration of the ball is:
a = 9.81 * sin(15.4°) = 3.15 m/s2
Now we can use the equations of motion to solve for the time it will take for the ball to travel the 4.4m.
The equation for displacement is given by:
x = 1/2 * a * t^2
Where x is the displacement (4.4m in this case), a is the acceleration (3.15 m/s2) and t is the time.
Rearranging the equation to solve for t, we get:
t = sqrt(2x/a)
Substituting in the values for x and a, we get:
t = sqrt(2*4.4/3.15) = 2.2 s
Therefore, it will take the basketball approximately 2.2 seconds to roll 4.4m down the incline.
The electric potential energy of a system of two point charges is proportional to? (1 Point)
A. The distance between the two charges.
B. The square of the distance between the two charges.
C. The inverse of the distance between the two charges.
D. The inverse of the distance between the two charges.
E. The inverse of the square of the distance between the two charges.
The electric potential energy of a system of two point charges is inversely proportional of the distance between the two charges.
Electric potential energy is a implicit energy( measured in joules) that results from conservative Coulomb forces and is associated with the configuration of a particular set of point charges within a defined system. An object may be said to have electric implicit energy by virtue of either its own electric charge or its relative position to other electrically charged objects.
The term" electric implicit energy" is used to describe the implicit energy in systems with time- variant electric fields, while the term" electrostatic implicit energy" is used to describe the implicit energy in systems with time- steady electric fields.
Learn more about electric potential energy from brainly, visit: brainly.com/question/12645463
#SPJ4
what is drop in mililiter?
20 drops per millilitre. Example: To convert 15 drops to millilitres, multiply by 0.05 to get 0.75 mL.
A drop is a unit of volume commonly used in medicine and cooking. The volume of a single drop can vary depending on factors such as the size of the dropper or the liquid being measured, but a commonly accepted standard is that one drop is equal to approximately 0.05 milliliters (mL).
It's important to note that relying on drops as a precise measurement can be problematic, as variations in dropper size, liquid viscosity, and other factors can cause significant variations in the actual volume of a drop. For this reason, it's often more accurate to use graduated measuring devices like syringes or graduated cylinders when precise measurements are required.
To learn more about millilitres :
https://brainly.com/question/27817177
#SPJ4
Which one of the following statements is true concerning the electrostatic charge on a conductor?
A. It is uniformly distributed throughout the volume
B. It is confined to the surface and is uniformly distributed
C. Most of the charge is on the outer surface, but it is not uniformly distributed
D. It is entirely on the surface and it is distributed according to the shape of the object
E. It is dispersed throughout the volume of the object and distributed according to the object's shape
The correct statement concerning the electrostatic charge on a conductor is “it is entirely on the surface and it is distributed according to the shape of the object” (D)
In the presence of an electric field, it is known that free electrons in a conductor will either drift or be forced to move in response to the field. Within the conductor, the electrons distribute themselves in such a way as to ensure that the ultimate electric field at every point within the conductor is zero.
Near the edge of a conductor, the electric field lines are oriented perpendicular to the surface of the wire, and they terminate or begin on charges that are located there. The surface or surfaces of a conductor are the only locations where an excess charge can be found.
To learn more about electrostatic charge, click here:
https://brainly.com/question/29813123
#SPJ4
Which of the following questions would be MOST helpful in gathering information about the uses of selective breeding?
Nowadays, breeders work to produce animals and plants with desirable phenotypic qualities, such as high crop yields, disease resistance, quick growth, and many other phenotypic traits. Option C is right as a result.
What purpose does selective breeding serve?Selective breeding is used. a process for creating an organism from parents who already have the required characteristics. a natural method of breeding offspring with desired traits.
Breeders today strive to create animals with desired phenotypic characteristics, such as high crop yields, disease resistance, rapid growth, and many other phenotypic traits.
Thus, the correct option is C.
For more details regarding selective breeding, visit:
https://brainly.com/question/461245
#SPJ9
Your question seems incomplete, the probable complete question is:
Which of the following questions would be most helpful in gathering information about selective breeding?
A. What traits in a chicken would be beneficial for humans?
OB. How long does it take for dogs to reproduce and birth puppies?
O C. How do wild cactus plants reproduce in the desert?
D. Why do peaches only grow in the summer?
The following statements are all true. Which one counts as an "exception to the rule" in being unusual for our solar system? a) Venus does not have a moon. b) Jupiter has a very small axis tilt. c) The diameter of Earth's Moon is about 1/4 that of Earth. d) Saturn has no solid surface.
Venus does not have a moon in being unusual for our solar system.
What is the solar ?Solar energy is an abundant, renewable resource of energy that is generated by the sun's radiation. It can be used to generate electricity, to heat and cool buildings, and to provide hot water. Solar energy is clean, sustainable, and cost-effective, making it an increasingly attractive option for homeowners and businesses alike. Solar energy is captured in photovoltaic (PV) cells, which convert sunlight into electricity. Solar panels can also be used to heat water in solar thermal systems. Additionally, solar energy can be used to heat and cool buildings, through a process called passive solar heating and cooling.
To learn more about solar
https://brainly.com/question/30567825
#SPJ4
Venus does not have a moon in being unusual for our solar system.
What is the solar ?Solar energy is an abundant, renewable resource of energy that is generated by the sun's radiation. It can be used to generate electricity, to heat and cool buildings, and to provide hot water.
Solar energy is clean, sustainable, and cost-effective, making it an increasingly attractive option for homeowners and businesses alike. Solar energy is captured in photovoltaic (PV) cells, which convert sunlight into electricity. Solar panels can also be used to heat water in solar thermal systems. Additionally, solar energy can be used to heat and cool buildings, through a process called passive solar heating and cooling.
To learn more about solar
https://brainly.com/question/2564537
#SPJ4
why is it necessary that a force probe be calibratedA.because there is a slight variance between sensors, this improves repeatability and helps neutralize driftB.because velocity would be changing and acceleration would be constant, which means force is constantC.because, for example, if you are adding 2 forces together with the same direction and magnitude, they will double, just like when adding vectorsD.To make sure that the motion detector only catches the motion of the ball and not the motion of the experimenter's hand
A option is correct. Calibrating a force probe is necessary because there can be a slight variance between sensors of the same make and model.
Calibrating a force probe is necessary because there can be a slight variance between sensors of the same make and model, which can result in inaccurate or inconsistent measurements. Calibration helps to identify and correct for these variations, which improves the accuracy and repeatability of the measurements. Additionally, over time, factors such as temperature and wear and tear can cause the readings of a force probe to drift or change slightly. Calibrating the probe periodically can help to detect and correct for these changes, ensuring that the probe continues to provide accurate readings.
To make sure that a motion detector only catches the motion of a ball and not the motion of an experimenter's hand, it is important to minimize any movement or vibration of the hand or the experimental setup. This can be achieved by using a tripod or other stable support for the motion detector, and by positioning the detector in a way that is focused only on the area where the ball is expected to move. In addition, it may be helpful to use software or filters to carefully analyze the data collected by the motion detector to ensure that any extraneous movement or noise is filtered out, leaving only the relevant data. By taking these steps, the motion detector can accurately capture the motion of the ball without being affected by the motion of the experimenter's hand.
Learn more about force probe here:
https://brainly.com/question/15383935
#SPJ4
Which parts differentiate ray diagram of reflected and reflected light check all that apply
Answer
4. Reflected ray
5. Refracted ray
Answers for the rest of the assignment
Diagram 2.
Refraction.
A and C.
The surface of the paper is rough, which causes incoming light rays to bounce off in a variety of different directions. Therefore, diffuse reflection occurs.
45 degrees.
1.5
2.3
74 degrees.
Air
Lucite
Hope this helps:)
The answers include the following:
The parts which differentiate ray diagram of reflected and reflected light are reflected and refracted ray.The surface of the paper is rough, which causes incoming light rays to bounce off in a variety of different directions which is why diffuse reflection occurs.What is Diffuse reflection?This is referred to as the scattering of light that occurs when it reflects off a surface.
For a rough surface, reflected light rays scatter in all directions which is therefore the reason why it was chosen as the correct choice.
Read more about Reflection here https://brainly.com/question/26642069
#SPJ1
A 75.0 kg person stands on a analog scale in an elevator that accelerates upwards from rest to 30.0 m/s in 2.00 seconds.
A.) Calculate the scale reading in Newtons (The scale exerts an upward force on him equal to its reading.)
B.) Calculate the scale reading compared with his weight.
C.) What is UNREASONABLE about this? (CHOOSE ONE)
-The time of 2 seconds is unreasonable.
-The final speed is too small for an elevator.
-It is unreasonable that an elevator carries a 75 kg person.
-There is nothing unreasonable.
-The acceleration is much higher than any standard elevator.
A. scale reading in Newtons is 2250 N
B. scale reading compared with his weight is 735.8 N
C. The final speed is too small for an elevator is unreasonable.
The given data is as follows:
Weight of person = 75kg
Acceleration = 30.0 m/s
Time period = 2.00 seconds
a. The scale reading in Newtons is calculated by using
F(net) = mass*acceleration
F(net) = 75kg * 30.0 m/s
F(net) = 2250 N
b. scale reading compared with his weight is calculated by using
Force(gravity) = m*g
Let's assume that g is the acceleration due to gravity - 9.8m/s^2
Force(gravity) = 75.0 * 9.81 m/s^2 = 735.8 N
The scale reading compared with the person's weight calculated by,
person's weight = 2250 N / 735.8 N = 3.06
C. UNREASONABLE option is:
The final speed is too small for an elevator. This is because elevators can get different speeds relying on their structure and purpose.
To learn more about scale reading
https://brainly.com/question/14960102
#SPJ4
Calculate the Kinetic energy of a truck that has a mass of 2900 kg and is moving at 55 m/s.
The kinetic energy of the truck is 44,287,500 J as per the given data.
What is kinetic energy?The energy an object has as a result of motion is known as kinetic energy. A force must be applied to an object in order to accelerate it.
The kinetic energy (K) of an object can be calculated using the formula:
[tex]K = 0.5 Xm X v^2[/tex]
Where,
m = mass of the object
v = velocity
Plugging in the values given in the question, we have:
[tex]K = 0.5 X 2900 X (55 m/s)^2[/tex]
[tex]K = 0.5 X 2900 X 3025 m^2/s^2[/tex]
K = 44,287,500 J (joules)
So, the kinetic energy of the truck is 44,287,500 J.
For more details regarding kinetic energy, visit:
https://brainly.com/question/26472013
#SPJ9
On the line before each effect, write the letter of the cause that correctly complete each sentence. Some causes might be more than once.
The light energy absorbed by a surface depends on D. the tilt of the surface.
A beam of light becomes more spread out as E. the beam of light is spread out more.
Some energy is absorbed by Earth's surface when C. the beam of light reaches Earth.
Energy is less concentrated near
G. Earth's poles.
Less energy reaches the poles because
E. the beam of light is spread out more.
Earth is warmest at the equator because
F. energy is concentrated there.
Earth is coldest at the poles because
H. tilt is the greatest there.
Surface temperature depends on the amount of energy absorbed by the surface.
Less energy is received in regions where
E. the beam of light is spread out more.
Earth is warm at the equator and cold at
G. Earth's poles.
What is the motion of the Earth aboutThe Earth moves in a variety of ways through space. Its main motions are:
Rotation: The Earth rotates on its axis, an imaginary line passing through the North and South Poles. This motion causes day and night to occur, and it takes approximately 24 hours for the Earth to complete one rotation.
Revolution: The Earth revolves around the sun in an elliptical orbit, completing one revolution in approximately 365.25 days. This motion is responsible for the changing of the seasons and the length of the year.
Precession: The Earth's axis wobbles as it rotates, like a spinning top.
Learn more about Earth on:
https://brainly.com/question/2599209
#SPJ1
True/False?each different signal in a 1h nmr spectrum represents a different of hydrogen atom. hydrogen atoms that are give the same signal.
The statement (each different signal in a 1H NMR spectrum represents a different hydrogen atom. hydrogen atoms that give the same signal) is false because each different signal in a 1H NMR spectrum represents a different set of hydrogen atoms, not necessarily a single hydrogen atom.
Hydrogen atoms that are chemically equivalent, such as those in the same functional group or environment, give the same signal.
In addition to its use in identification, nuclear magnetic resonance (NMR) spectroscopy can provide in-depth knowledge about the structure, dynamics, reaction state, and chemical environment of molecules. Proton and carbon-13 NMR spectroscopy are the most popular forms of nuclear magnetic resonance (NMR), however, this technique can be applied to any kind of sample that has nuclei that have spin.
Want to know more about the NMR spectrum visit the link which is given below;
https://brainly.com/question/29775399
#SPJ4
What is the Darcy Weisbach formula?
The Darcy-Weisbach formula is an equation used to calculate the frictional losses, or pressure drop, in a fluid flowing through a pipe or other conduit. It is widely used in fluid mechanics and engineering.
The formula is:
ΔP = f (L/D) (ρ V^2 / 2)
The Darcy-Weisbach formula is an equation that is used to calculate the frictional pressure drop or head loss in a fluid flowing through a pipe or duct. It was developed by Henry Darcy and Julius Weisbach in the mid-19th century and is still widely used today.
The Darcy-Weisbach formula is based on the concept of the Reynolds number, which is a dimensionless quantity that characterizes the flow regime. For laminar flow, the formula reduces to the Hagen-Poiseuille equation, while for turbulent flow, it includes a friction factor that depends on the Reynolds number and the relative roughness of the pipe or duct. It takes into account the fluid properties, such as viscosity and density, as well as the roughness of the pipe or duct walls.
To learn more about Darcy-Weisbach formula visit here:
brainly.com/question/17361860
#SPJ4
How do you calculate net power dissipation?
The formula P = IV, where I and V represent current and voltage, is used to compute the power dissipation in an electrical circuit.
Power is lost by any resistor in a circuit that has a voltage drop across it. All resistors have a power rating because the electrical energy is transformed into thermal energy. The resistor can dissipate up to this amount of electricity without burning out. The power of dissipation is determined by the conversion rate.
In order to compute dissipated power, use the formula P = IV.
For instance, suppose the circuit's voltage is 2 V and its current is 20 A. Thus, the power dissipation in the circuit is 40W since P = 20 x 2 P = 40W.
To know more about Power dissipation, visit,
https://brainly.com/question/15015986
#SPJ4
A wire-wound resistor has a resistance of 200 ohms. What voltage applied between the terminals will produce a current of 0.08 amperes?
The voltage across the wire-wound resistor has a resistance of 200 ohms and the current across this circuit of 0.08 amperes will be 160 V.
What is Ohm's law?Ohm's Law is a formula which is used to calculate the relationship between voltage or potential difference across the circuit, the electric current and resistance in an electrical circuit.
The expression for this law will be:
V = IR
where, V is the voltage,
I is the electric current,
R is the resistance across the circuit
V = IR
V = 200 × 0.8
V = 160 volts.
Learn more about Ohm's law here:
https://brainly.com/question/1247379
#SPJ1
Two blocks connected by a cord passing over a small, frictionless pulley rest on frictionless planes. (a) Which way will the system move when the blocks are released from rest? (b) What is the acceleration of the blocks? (c) What is the tension in the cord?
(a) System will move downward. (b) Acceleration is 1.96 m/s^2. (c) Tension in cord is 66.8 N.
(a) The block with the larger mass will move downward, and the block with the smaller mass will move upward. So the net force on the system is downward.
(b) The acceleration of the blocks is,
[tex]a = \dfrac{(m_2 - m_1)g}{(m1 + m2)}[/tex]
where m₁ and m₂ are the masses of the blocks and g is the acceleration due to gravity.
m₁ = 4 kg and m₂ = 6 kg
The acceleration is,
[tex]a = \dfrac{(6 - 4)(9.8)}{(4 + 6)}\\ = 1.96 m/s^2.[/tex]
(c) The tension in the cord,
[tex]T = m_2a + m_2g,[/tex]
where m2 is the mass of the block that is moving downward, a is the acceleration of the blocks, and g is the acceleration due to gravity.
[tex]T = (6)(1.96) + (6)(9.8)\\ = 66.8 N.[/tex]
Therefore, the tension in the cord is 66.8 N.
To know more about the tension, here
brainly.com/question/29124835
#SPJ4
Based on what you learned about light, select all of the correct statements from the following list.A photon is a particle of light.High frequency photons carry more energy than long wavelength photons.Light can act both as a wave and a particle.All electromagnetic waves travel at the speed of light.
All of the following statements are correct that High frequency photons carry more energy than long wavelength photons. Both a wave and a particle can behave as light. For all electromagnetic waves, the speed of light remains constant.
Which 4 categories best describe light science?The electromagnetic spectrum spans a far wider range than the visible light, which contains all the colours of the rainbow. Invisible to the human eye, such as radio waves, microwaves, infrared radiation, ultraviolet rays, X-rays, and gamma rays, are examples of other types of light.
Which has a higher photon energy?Since a photon's energy is determined by the frequency of the light, light with the highest frequency will also have the maximum energy per photon. As a result, violet light will have the most energy per photon.
To know more about wavelength visit:-
brainly.com/question/13533093?
#SPJ4
Which of the following statements about speed and velocity is correct?Velocity only describes an object’s rate of motion.Speed describes how an object is changing its velocity.Speed and velocity both describe how an object is speeding up.Only velocity includes the direction an object is traveling.
Answer:
Velocity includes direction.
Explanation:
Velocity is a vector, so it has direction and magnitude.
What are examples of a third class lever?
Examples of third-class levers are Baseball bats, Shovels, Fishing rods, and Tweezers.
A third-class lever is a particular kind of basic machine that is frequently utilized in a variety of products, from sporting goods to construction tools.
Third-class levers include, for instance:
The bat's point of contact with the ball is known as the fulcrum, and the batter's hands' exerted force is known as the effort.
While using a shovel, the effort is the force used by the user's hands, and the fulcrum is the point at which the blade makes contact with the ground.
The effort, or power used to reel in the fish, is given to the fishing line at the place where the angler's hands are holding the rod.
The fulcrum is the point where the tips of the tweezers meet, and the effort is the force applied by the user's fingers to grip and remove a small object.
Learn more about the third-class lever at
https://brainly.com/question/6706255
#SPJ4
what is the lowest theoretical temperature that can exist in the universe on the kelvin scale?
Answer: 0 K
Explanation: On the Kelvin scale, absolute zero (0 K) is the temperature at which the volume of a gas becomes zero. It is therefore the lowest possible temperature, or the absolute zero on any temperature scale.
Stored energy that can be used to do work is called ________ energy,
"Stored energy that can be used to do work is called potential energy."
Energy comes in a variety of forms and enables us to carry out our tasks. Energy is often transferred from one form to another, and can also be lost as heat.
Energy that is stored is called potential energy. Energy that can be stored and used later is known as potential energy. An object frequently possesses potential energy as a result of its location. A ball held in the air, for instance, has the potential to fall and hence contains potential energy. Potential energy is transformed into kinetic energy, or energy of motion, when the ball falls.
Potential energy, such as the energy contained in our food, can also be chemical energy. The energy required to initiate a chemical reaction is known as activation energy, while subjects relating to heat energy are covered by thermodynamic energy.
To know more about energy:
https://brainly.com/question/11749818
#SPJ4
Calculate the force of attraction between a cation with a valence of +2 and an anion with a valence of -2, the centers of which are separated by a distance of 2.5 nm.
Then force of attraction between the cation and anion can be calculated using Coulomb's law: Force = -7.592 x 10^-9 N.
What is the attraction ?The attraction of visiting a new place is the opportunity to explore, discover and learn something new. Visiting a new place often involves immersing oneself in new cultures and customs, experiencing different foods and cuisines, and taking in breathtaking views. By exploring a new place, one can gain a greater understanding of the past and present, and appreciate the diversity of people, cultures, and landscapes. Travelling to a new place also offers the chance to make new friends, learn new skills and create lasting memories. Visiting a new place can be a thrilling, eye-opening experience, and the memories created will last forever.
Then force of attraction betweena the cation and anion can be calculated using Coulomb's law:
Force = k * (Q1 * Q2) / r2
where k is Coulomb's constant (8.99 x 10^9 N*m²/C²), Q1 and Q2 are the charges of the cation and anion (2 and -2 in this case), and r is the distance between the two particles (2.5 nm).
Force = 8.99 x 10^9 N*m²/C² * (2 * -2) / (2.5 x 10^-9 m)²
Force = -7.592 x 10^-9 N
To learn more about attraction
https://brainly.com/question/25624188
#SPJ4
Then force of attraction between the cation and anion can be calculated using Coulomb's law: Force = [tex]-7.592 \times 10^{-9} N.[/tex]
What is the attraction ?The attraction of visiting a new place is the opportunity to explore, discover and learn something new. Visiting a new place often involves immersing oneself in new cultures and customs, experiencing different foods and cuisines, and taking in breathtaking views. By exploring a new place, one can gain a greater understanding of the past and present, and appreciate the diversity of people, cultures, and landscapes. Travelling to a new place also offers the chance to make new friends, learn new skills and create lasting memories. Visiting a new place can be a thrilling, eye-opening experience, and the memories created will last forever.
Then force of attraction between a the cation and anion can be calculated using Coulomb's law:
[tex]Force = k \times (Q1 \times Q2) / r^2[/tex]
where k is Coulomb's constant ([tex]8.99 \times 10^9 N\times m^2/C^2)[/tex], Q1 and Q2 are the charges of the cation and anion (2 and -2 in this case), and r is the distance between the two particles (2.5 nm).
[tex]Force = 8.99 \times 10^9 N\times m^2/C^2 \times (2 \times -2) / (2.5 \times 10^{-9} m)^2\\Force = -7.592 x 10^{-9} N[/tex]
To learn more about attraction
brainly.com/question/25624188
#SPJ4
Which of these is not a difference between the gravitational force and the Coulomb force?
a.the strengths of the forces are the same
b.both forces are always attractive
c.the force decreases by the factor 1/r2 as distance increases
d.both forces fields are measured in same units
Both the gravitational influence and indeed the Coulomb force are always attracting, hence there is no distinction between them(option b).
Describe force.A clear meaning is associated to the word "force." The terms "pressure" and "pull" are totally acceptable at this degree to describe dynamics. An object does not have a force inside of it or within it. Another object applies a force to the first. Both living things and non-living things can be considered to be parts of a force.
Is strength equivalent to force?As a result of their seeming comparable definitions, force and power are frequently employed interchangeably. They are not equivalent, nevertheless, in physics. A two things interacting produces force as its primary byproduct.
To know more about Force visit:
https://brainly.com/question/13191643
#SPJ1
calculate the magnitude of the force, in newtons, the jumper must exert on the ground to produce an upward acceleration 4.00 times the acceleration due to gravity.
All things in a gravitational field, like the surface of the Earth, undergo a constant acceleration that is known as the acceleration due to gravity.
What is acceleration due to gravity?The amount of force that must be applied to the ground by the jumper to achieve a 4.00 times acceleration upward.
Newton's second law, which states that the net force exerted on an item is equal to its mass times its acceleration, can be used to compute the acceleration brought on by gravity.
The jumper's mass as “m”. Gravitational acceleration is [tex]9.8 \frac{m}{s^2}[/tex], so an acceleration of 4.00 times that amount would be [tex]4.00 \times 9.8, or 39.2[/tex] m/s2. The force the jumper must apply to the ground is determined by:
[tex]F = m \times a[/tex]
F stands for force, m for mass, and a for acceleration.
[tex]F = m \times 39.2[/tex]
Therefore, The jumper's mass multiplied by 39.2 N/kg is the force that must be applied to the ground in order to achieve an upward acceleration that is 4.00 times the acceleration caused by gravity.
Learn more about acceleration here:
https://brainly.com/question/12550364
#SPJ4