Calculate the concentration of a solution if 15 g of salt is added to 170 g of water.​

The correct order of decreasing boiling points is: I > III > II. The closest answer choice is b) I > III > II.

The order of boiling points of the given compounds can be determined by analyzing their intermolecular forces, which are influenced by the molecular weight, polarity, and ability to form hydrogen bonds.

I. CH3CH2CH2CH2NH2 (1-amino-butane): This compound can form hydrogen bonds between the NH2 group and the adjacent molecules, and it also has a higher molecular weight than the other two compounds, which increases its boiling point.

II. CH3CH2OCH2CH3 (diethyl ether): This compound is polar due to the oxygen atom, but it cannot form hydrogen bonds, which reduces its boiling point compared to compound I.

III. CH3CH2CH2CH2OH (1-butanol): This compound is also polar and can form hydrogen bonds, but its molecular weight is lower than that of compound I, which reduces its boiling point.

For more question on boiling points click on

https://brainly.com/question/29233996

#SPJ11

correct question

arrange the following compounds in order of decreasing boiling point, putting the compound with the highest boiling point first.

I. CH3CH2CH2CH2NH2      

II. CH3CH2OCH2CH3  

III. CH3CH2CH2CH2OH  

a) I > II > III.

b) I > III > II.

c) III > I > II.

d) III > II > I.

29.77 grams of N2 will be formed when 18.1 grams of NH3 reacts with 90.4 grams of CuO.

To find the mass of N2 formed when NH3 reacts with CuO, we need to determine the limiting reactant first. The limiting reactant is the reactant that is completely consumed in the reaction and determines the maximum amount of product that can be formed.

Step 1: Convert the given masses of NH3 and CuO to moles.

Using the molar masses of NH3 (17.03 g/mol) and CuO (79.55 g/mol), we can calculate the number of moles of each reactant.

Moles of NH3 = 18.1 g NH3 / 17.03 g/mol = 1.063 mol NH3

Moles of CuO = 90.4 g CuO / 79.55 g/mol = 1.137 mol CuO

Step 2: Determine the stoichiometry of the balanced equation.

From the balanced equation of the reaction, we know that the mole ratio of NH3 to N2 is 1:1. Therefore, the moles of N2 formed will be equal to the moles of NH3.

Moles of N2 formed = 1.063 mol NH3

Step 3: Convert moles of N2 to grams.

Using the molar mass of N2 (28.01 g/mol), we can calculate the mass of N2 formed.

Mass of N2 formed = 1.063 mol N2 × 28.01 g/mol = 29.77 g N2

Therefore, approximately 29.77 grams of N2 will be formed when 18.1 grams of NH3 reacts with 90.4 grams of CuO.

To learn more about moles, refer below:

https://brainly.com/question/31597231

#SPJ11

C) You would expect to have 270 mL of lemonade.

The total volume is the sum of 20 mL of flavor crystals and 250 mL of water.

When you dissolve the flavor crystals into the water, the volume of the water does not change. The flavor crystals mix with the water and occupy the same space. Therefore, the total volume of the lemonade will be the sum of the volume of the flavor crystals (20 mL) and the volume of the water (250 mL), resulting in 270 mL of lemonade.

It's important to note that when substances dissolve in a solvent, they typically do not change the overall volume of the solution. The dissolved particles become dispersed throughout the solvent, occupying the same volume as the solvent itself.

To know more about Volume related question visit:

https://brainly.com/question/17322215

#SPJ11

The rate of change of [I-] in the first 10 s is 0.0132 M/s.

To calculate the rate of change of [I-], we need to use the formula: rate = (change in concentration) / (time). Here, the [I-] changes from 1.000 M to 0.868 M in the first 10 s. So, the change in concentration is (1.000 M - 0.868 M) = 0.132 M. Therefore, the rate of change of [I-] in the first 10 s is:

rate = (0.132 M) / (10 s) = 0.0132 M/s.
This means that the concentration of [I-] is decreasing by 0.0132 M every second in the first 10 seconds of the reaction. It is important to note that the rate of change of [I-] is a measure of the reaction rate only for the specific time interval and conditions given.

To know more about the concentration visit:

https://brainly.com/question/26013645

#SPJ11

Liquid air is a mixture rather than a pure substance. It is composed of various gases, including nitrogen, oxygen, argon, and traces of other gases.

Liquid air is not a pure substance because it consists of a combination of different gases. Air itself is a mixture of gases, primarily nitrogen (78%), oxygen (21%), and traces of other gases, including argon (about 0.9%). When air is cooled to extremely low temperatures, below -250 degrees Celsius, it condenses into a liquid state, known as liquid air.

The process of fractional distillation is used to separate the components of liquid air. Fractional distillation takes advantage of the fact that the gases in the mixture have different boiling points. By gradually warming up the liquid air, the gases with lower boiling points, such as nitrogen, vaporize first and can be collected separately. As the temperature increases further, oxygen and argon can be collected in the same manner, as they have higher boiling points than nitrogen.

Therefore, liquid air can be considered a mixture because it consists of multiple gases that can be separated and collected individually through the process of fractional distillation.

To learn more about oxygen click here, brainly.com/question/13905823

#SPJ11

The step in any reaction sequence that determines the rate law for the overall reaction is called the rate-determining step. TRUE.

This step is also known as the slowest step in the reaction sequence. The rate law for the overall reaction is determined by the reactants and the rate-determining step. Therefore, it is important to identify the rate-determining step in order to determine the rate law for the overall reaction.
                                 True, the step in any reaction sequence that determines the rate law for the overall reaction is called the rate-determining step. This step has the slowest rate among all the steps in the reaction sequence and thus governs the overall rate of the reaction.

Learn more about reaction sequence

brainly.com/question/29607707

#SPJ11

Molecular solids are made up of individual molecules held together by intermolecular forces such as van der Waals forces, dipole-dipole interactions, and hydrogen bonding. When these solids melt, only the intermolecular forces are disrupted, resulting in relatively low melting points.

In contrast, metallic solids are made up of metallic atoms held together by metallic bonding, ionic solids are made up of ions held together by ionic bonds, covalent-network solids are made up of atoms held together by covalent bonds in a giant network, and semiconductors are materials with properties between those of a conductor and an insulator. These types of solids have higher melting points because the bonds holding the atoms or ions together are stronger.

When some solids melt, the only forces disrupted are intermolecular forces, resulting in relatively low melting points. This description fits molecular solids, as they are held together by relatively weak intermolecular forces (such as hydrogen bonding in H2O(s), ice) which can be broken up more easily, leading to lower melting points. Other types of solids like metallic, ionic, and covalent-network solids have stronger bonding forces and generally higher melting points.

To know more about Molecular visit :

https://brainly.com/question/14614762

#SPJ11

None of the molecules listed on the data sheet contain carbon with a negative formal charge.

A formal charge is a hypothetical charge assigned to each atom in a molecule, assuming that electrons in covalent bonds are shared equally between the atoms. The formal charge of an atom is calculated by subtracting the number of electrons assigned to the atom in a Lewis structure from the number of valence electrons of the atom in its isolated state.

In CO, the carbon atom has a formal charge of 0, since it is bonded to one oxygen atom that has six valence electrons and has shared two electrons with the carbon atom.

In CO2, each carbon atom has a formal charge of +2, since it is bonded to two oxygen atoms that have six valence electrons each and have shared two electrons with each carbon atom.

In H2CO, the carbon atom has a formal charge of 0, since it is bonded to two hydrogen atoms that each have one valence electron and one oxygen atom that has six valence electrons and has shared two electrons with the carbon atom.

In CH4, each carbon atom has a formal charge of 0, since it is bonded to four hydrogen atoms that each have one valence electron and have shared one electron with each carbon atom.

To know more about Carbon:

https://brainly.com/question/22530423

#SPJ11

The addition of Ca²⁺ and OH⁻ ions would not cause a shift in the equilibrium of the saturated calcium hydroxide solution, while the addition of Na⁺, H⁺, and NO₃⁻ ions would shift the equilibrium to the left, and the addition of Ag⁺ ions would cause a precipitation reaction.

In a saturated calcium hydroxide solution, the solid Ca(OH)₂ is in equilibrium with its ions in solution: Ca(OH)₂(s) ⇌ Ca²⁺(aq) + 2OH⁻(aq). The addition of Ca²⁺ and OH⁻ ions would not cause a shift in the equilibrium since they are already present in the solution.

The addition of Na⁺ ions, which are spectator ions and do not participate in the reaction, would increase the ionic strength of the solution and shift the equilibrium to the left. The addition of H⁺ ions, which would react with OH⁻ ions to form H₂O, and NO₃⁻ ions, which are spectator ions and do not participate in the reaction, would also shift the equilibrium to the left.

The addition of Ag⁺ ions, which have a low solubility product with OH⁻ ions, would cause a precipitation reaction and shift the equilibrium to the left.

To know more about precipitation reaction refer here:

https://brainly.com/question/29762381#

#SPJ11

Here are the answers to your questions:

1. What is the balanced chemical equation for this reaction? The balanced chemical equation for the reaction between glycolic acid (HA) and sodium hydroxide (NaOH) is: HA + NaOH → NaA + H2O where NaA is the sodium salt of glycolic acid (NaHA).

2. What is the initial number of moles of glycolic acid in the solution? To find the initial number of moles of glycolic acid in the solution, we need to use the formula: moles = concentration x volume where concentration is in units of moles per liter (M) and volume is in units of liters (L). Since the volume given in the problem is in milliliters (mL), we need to convert it to liters by dividing by 1000: volume = 50.0 mL / 1000 mL/L = 0.050 L Now we can plug in the values: moles of HA = concentration of HA x volume of HA moles of HA = 0.15 M x 0.050 L moles of HA = 0.0075 mol So the initial number of moles of glycolic acid in the solution is 0.0075 mol.

3. What is the volume of NaOH needed to reach the equivalence point? The equivalence point is the point at which all of the glycolic acid has reacted with the sodium hydroxide, so the moles of NaOH added must be equal to the moles of HA in the solution. We can use this fact to find the volume of NaOH needed to reach the equivalence point: moles of NaOH = moles of HA concentration of NaOH x volume of NaOH = moles of HA Solving for volume of NaOH: volume of NaOH = moles of HA / concentration of NaOH volume of NaOH = 0.0075 mol / 0.50 M volume of NaOH = 0.015 L or 15.0 mL So the volume of NaOH needed to reach the equivalence point is 15.0 mL. I hope that helps! Let me know if you have any other questions.

Sodium hydroxide, also known as lye and caustic soda or caustic soda, is an inorganic compound with the chemical formula NaOH. This compound is an ionic compound in the form of a white solid composed of the sodium cation Na⁺ and the hydroxide anion OH.

You can learn more about Sodium Hydroxide at https://brainly.com/question/30460434

#SPJ11

The dissociation constant of a weak acid is a measure of its strength, which can be determined by measuring the pH of a half-neutralized solution.

When an acid is partially neutralized, it forms a mixture of the conjugate acid and conjugate base, which can be represented by the Henderson-Hasselbalch equation.
pH = pKa + log ([A-]/[HA])
Where pH is the measured pH of the solution, pKa is the dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid. In order to determine the dissociation constant, the concentration of the weak acid and its conjugate base must be known, which can be achieved through titration.
Titration is a method of adding a solution of known concentration (the titrant) to a solution of unknown concentration (the analyte) until the reaction is complete. In the case of a weak acid, the titrant is typically a strong base, which reacts with the acid to form the conjugate base and water. By measuring the pH of the solution at various points during the titration, it is possible to determine the pH at the half-neutralization point, where the concentration of the weak acid and its conjugate base are equal.
At this point, the Henderson-Hasselbalch equation can be rearranged to solve for the dissociation constant, pKa.
pKa = pH - log ([A-]/[HA])

By using this equation and the measured pH at the half-neutralization point, it is possible to determine the dissociation constant of the weak acid. This constant is a valuable tool for predicting the behavior of the acid in different solutions, and can be used to design experiments and understand chemical reactions involving weak acids.

To learn more about acid:

https://brainly.com/question/29796621

#SPJ11

The pH of the 0.33 M solution of the weak acid HA is 10.05.

The pH of a 0.33 M solution of a weak acid HA with a Ka of 8.94×10⁻¹¹ can be calculated using the Henderson-Hasselbalch equation.

The Henderson-Hasselbalch equation is:

pH = pKa + log([A⁻]/[HA])

Where pKa is the negative logarithm of the acid dissociation constant (Ka), [A⁻] is the concentration of the conjugate base of the acid, and [HA] is the concentration of the acid.

Since the acid is weak, we can assume that the concentration of the conjugate base is approximately equal to the concentration of the acid after dissociation. Therefore, we can simplify the equation as:

pH = pKa + log(1)

pH = pKa

Plugging in the values, we get:

pH = -log(8.94×10⁻¹¹)

pH = 10.05

Therefore, the pH of the 0.33 M solution of the weak acid HA is 10.05.

To know more about Henderson-Hasselbalch equation refer here:

https://brainly.com/question/31732200#

#SPJ11

The xanthoproteic test is a chemical test used to detect the presence of aromatic amino acids, particularly tyrosine, in proteins.

Here is a possible mechanism for the reactions involved in the xanthoproteic test with a tyrosine residue:

Step 1: Nitration

Concentrated nitric acid (HNO3) reacts with the phenolic group of tyrosine to form a nitrated intermediate.

Tyrosine + HNO3 → Nitrotyrosine

Step 2: Nitrotyrosine Formation

When the nitrated intermediate is treated with sodium hydroxide (NaOH), it undergoes a rearrangement reaction, forming a yellow-orange compound called nitrotyrosine.

Nitrotyrosine intermediate + NaOH → Nitrotyrosine

Step 3: Xanthoproteic Reaction

When the nitrotyrosine compound is further treated with concentrated hydrochloric acid (HCl),

it undergoes a dehydration reaction to form a more stable compound that absorbs visible light and gives a characteristic yellow color. This compound is called xanthoproteic acid.

Nitrotyrosine + HCl → Xanthoproteic acid

Overall Reaction:

Tyrosine + HNO3 + NaOH + HCl → Xanthoproteic acid

The xanthoproteic test can be used to confirm the presence of a tyrosine residue in a protein.

To know more about xanthoproteic test refer here

https://brainly.com/question/9612581#

#SPJ11

According to the increasing magnitude of lattice energy, this is the right order of the given chemical compounds: NaCl < CsBr < RbBr

Lattice Energy is a measure of the energy released when gaseous ions come together to form a solid lattice structure. It depends on the magnitude of the charges on the ions and the distance between them.

NaCl:

Sodium ion (Na+) has a charge of +1, and chloride ion (Cl-) has a charge of -1. Both ions are relatively small in size. The lattice energy of NaCl is moderate.

CsBr:

Cesium ion (Cs+) has a charge of +1, and bromide ion (Br-) has a charge of -1. Cesium ion is larger than sodium ion (Na+), and bromide ion is larger than chloride ion (Cl-). The larger size of the ions reduces the electrostatic attraction between them. As a result, the lattice energy of CsBr is lower than that of NaCl.

RbBr:

Rubidium ion (Rb+) has a charge of +1, and bromide ion (Br-) has a charge of -1. Rubidium ion is larger than both sodium ion (Na+) and cesium ion (Cs+), and bromide ion is larger than chloride ion (Cl-) and cesium ion (Cs+). The larger size of the ions in RbBr further weakens the electrostatic attraction, resulting in the lowest lattice energy among the three compounds.

Learn more about lattice energy here:

https://brainly.com/question/13397522

#SPJ1

The decrease in the production of corn per acre over several years, despite similar weather conditions, suggests a change in an abiotic factor affecting the corn growth. The most likely factor causing this decrease is a decrease in soil nutrients.

The abiotic factor that is most likely causing the decrease in the production of corn in a field planted every year is the decrease in soil nutrients. The soil contains the essential nutrients necessary for plant growth, such as nitrogen, phosphorus, and potassium.

Over time, continuous planting without adequate soil nutrient replacement can deplete the soil of these necessary nutrients, resulting in a decrease in the production of corn per acre despite similar weather conditions. The farmer should have used a method of soil conservation such as crop rotation, application of fertilizers, or fallow (giving the land a rest for a period). All these techniques aim at enriching the soil with nutrients.

Know more about abiotic factor    here:

https://brainly.com/question/2740442

#SPJ8

The three common driving forces for chemical reactions are: Formation of a stable compound, Formation of a less stable compound, and Formation of a gas or solid and observations accompanying them includes changes in temperature, color, pressure, and/or the formation of a gas.

Formation of a stable compound: This occurs when two or more reactants combine to form a product that is more stable than the reactants. This can be observed by a decrease in energy and/or the release of heat or light.

Formation of a less stable compound: This occurs when a reactant breaks down into simpler products that are less stable than the reactant. This can be observed by an increase in energy and/or the absorption of heat or light.

Formation of a gas or solid: This occurs when a reactant or product forms a gas or solid, which can drive the reaction forward by removing products from the reaction mixture. This can be observed by a change in color or the formation of a precipitate.

Observations that may accompany these driving forces include changes in temperature, color, pressure, and/or the formation of a gas or precipitate. For example, the formation of a gas may be observed as bubbles forming in a solution, the formation of a precipitate may be observed as a cloudy appearance, and a change in color may indicate a change in the electronic structure of the reactants or products.

Know more about Chemical reaction here:

https://brainly.com/question/11231920

#SPJ11

The proposed synthesis that will achieve the following transformation of Ph. Br to Ph ОН are I and III only.

To identify which of the proposed synthesis will achieve the transformation:
Option I:
1) Mg - This step forms a Grignard reagent.
2) CO2 - The Grignard reagent reacts with CO2 to form a carboxylate salt.
3) H3O* - The carboxylate salt is protonated to form a carboxylic acid.

Option II:
1) Mg - This step forms a Grignard reagent.
2) Å - This step is not clear, and no reaction can be identified.
3) H3CrO4 - This is a strong oxidizing agent, but without a clear previous step, the transformation cannot be determined.

Option III:
1) NaCN - This step involves nucleophilic substitution, replacing Br with CN.
2) H3O* - This step hydrolyzes the nitrile, converting it into a carboxylic acid.

Therefore, Considering the reactions, the synthesis that achieve the transformation are options I and III only.

To know more about synthesis refer here :

https://brainly.com/question/30332351

#SPJ11

The reaction is endothermic, the enthalpy change (ΔH) is positive. Thus, increasing the temperature will increase the value of Kc, while decreasing the temperature will decrease its value. Therefore, the equilibrium constant of the given reaction is directly proportional to the temperature.

The given reaction is endothermic and in equilibrium. We need to predict the effect of temperature change on the direction of the reaction and determine how the equilibrium constant is affected by the temperature change.

Increasing the temperature of an endothermic reaction shifts the equilibrium to the right side to consume the added heat, while decreasing the temperature shifts the equilibrium to the left side to generate more heat.

Therefore, increasing the temperature of the given reaction will shift the equilibrium to the right, favoring the production of more product, i.e., iodine atoms. Conversely, decreasing the temperature will shift the equilibrium to the left, favoring the formation of more reactants, i.e., iodine molecules.

The value of the equilibrium constant (Kc) of the reaction is affected by the temperature change through the Van't Hoff equation, which states that the equilibrium constant of a reaction changes with temperature according to the equation ln(K2/K1) = ΔH/R (1/T1 - 1/T2), where K1 and K2 are the equilibrium constants at temperatures T1 and T2, respectively, ΔH is the enthalpy change of the reaction, R is the gas constant, and T1 and T2 are the absolute temperatures.

Since the reaction is endothermic, the enthalpy change (ΔH) is positive. Thus, increasing the temperature will increase the value of Kc, while decreasing the temperature will decrease its value. Therefore, the equilibrium constant of the given reaction is directly proportional to the temperature.

To know more about endothermic refer here:

https://brainly.com/question/23184814#

#SPJ11

Answer: They give energy without having to hire trained workers to manage power plants.

Explanation: You can just slap them on houses hook them up and there good for a month till you have to clean the dust off them which anyone can do.

Solar cells are particularly suitable for developing countries because they provide a sustainable and affordable source of energy.

Solar cells, also known as photovoltaic cells, are electronic devices that convert sunlight into electricity. They are made of semiconductor materials, such as silicon, and work by absorbing photons from sunlight.

By using solar cells, developing countries can improve access to electricity and reduce their reliance on fossil fuels.

Developing countries often lack access to reliable electricity, and solar cells can provide a solution to this problem. Solar cells are also easy to install and maintain, making them a practical option for developing countries.

In conclusion, solar cells are a great option for developing countries because they provide a sustainable, affordable, and practical source of energy.

Learn more about solar cells here:

https://brainly.com/question/29553595

#SPJ6

The balanced redox reaction involves the transfer of electrons between Fe and [tex]H_2O_2[/tex], with Fe being oxidized and [tex]H_2O_2[/tex] being reduced, indicating the involvement of oxidizing and reducing agents.

In the balanced redox reaction [tex]2 Fe+(aq) + H2O2(aq) \rightarrow 2Fe+3(aq) + 2 OH(aq)[/tex], the oxidation state of oxygen in [tex]H_2O_2[/tex] is -1 while Iron (Fe) is the element that is oxidized, going from a +1 oxidation state to a +3 oxidation state.

Oxygen (O) is the element that is reduced, going from a -1 oxidation state in [tex]H_2O_2[/tex] to a -2 oxidation state in [tex]OH[/tex]. [tex]H_2O_2[/tex] is the oxidizing agent that causes the oxidation of [tex]Fe[/tex]to [tex]Fe+3[/tex], while [tex]Fe+[/tex] is the reducing agent that causes the reduction of O in [tex]H_2O_2[/tex] to [tex]OH[/tex].

Therefore,

Learn more about redox reaction: brainly.com/question/21851295

#SPJ11

The new solubility of In₂(SO₄)₃ in the presence of 0.200 M Na₂SO₄ is 0.0065 - 1.28 × 10⁻⁵ = 0.0065 M.

To determine the new solubility of In₂(SO₄)₃ in the presence of 0.200 M Na₂SO₄, we need to consider the effect of the common ion on the solubility equilibrium. Na₂SO₄ contains the common ion SO₄²⁻, which is also present in In₂(SO₄)₃. When a common ion is added to a solution, the solubility of the salt containing that ion decreases because the equilibrium shifts to the left to counteract the increased concentration of the common ion.

First, we need to calculate the ion product, Qsp, for the solution containing 0.0065 M In₂(SO₄)₃ and 0.200 M Na₂SO₄. The ion product, Qsp, is calculated in the same way as Ksp, but with the actual ion concentrations instead of the solubility product constant. For In₂(SO₄)₃, we have:

In₂(SO₄)₃(s) ⇌ 2 In³⁺(aq) + 3 SO₄²⁻(aq)

Qsp = [In³⁺]²[SO₄²⁻]³ = (2x)²(0.200+3x)³ = 8(0.200+3x)³

where x is the change in concentration of In³⁺ and SO₄²⁻ due to dissolution of In₂(SO₄)₃.

We can then use the expression Qsp = Ksp to solve for x:

Ksp = 1.3 × 10⁻⁹ = 8(0.200+3x)³

Solving for x gives x = 1.28 × 10⁻⁵ M.

To learn more about solubility

https://brainly.com/question/31493083

#SPJ4

The mass percent of the solute in the solution can be calculated using the formula:

Mass percent = (mass of solute / total mass of solution) x 100%

In this case, the mass of the solute is 3.90 g and the mass of the solvent is 13.7 g. Therefore, the total mass of the solution is:

Total mass of solution = Mass of solute + Mass of solvent
Total mass of solution = 3.90 g + 13.7 g
Total mass of solution = 17.6 g

Now, substituting these values in the formula, we get:

Mass percent = (3.90 g / 17.6 g) x 100%
Mass percent = 22.2%

Therefore, the mass percent of the solute in the solution is 22.2%.

learn more about Mass percent

https://brainly.in/question/1840841?referrer=searchResults

#SPJ11

To determine which compounds can exhibit optical isomerism, we need to identify compounds that have chiral centres. A chiral centre is a carbon atom that is bonded to four different groups. Compounds with chiral centres can exhibit optical isomerism.

1. 1,2-dibromoethane: This compound does not have a chiral centre since both carbon atoms are bonded to the same groups (two bromine atoms and two hydrogen atoms). It does not exhibit optical isomerism.

2. 2-bromo-2-chloropropane: This compound has a chiral centre at the carbon atom bonded to the bromine and chlorine atoms. It can exhibit optical isomerism.

3. 1-bromo-1-chloroethane: This compound does not have a chiral centre. Both carbon atoms are bonded to the same groups (one bromine atom, one chlorine atom, and three hydrogen atoms). It does not exhibit optical isomerism.

4. 1,2-dibromo propane: This compound has a chiral centre at the central carbon atom bonded to two bromine atoms and two hydrogen atoms. It can exhibit optical isomerism.

Based on the analysis, the compounds that can exhibit optical isomerism are:- 2-bromo-2-chloropropane and 1,2-dibromo propane.

Learn more about optical isomerism here ;

https://brainly.com/question/28034444

#SPJ11

In scientific notation, the value 0.01396 mL is expressed as 1.396 × 10⁻³ mL, where 1.396 is the coefficient and -3 is the exponent of 10.

To express a value in scientific notation, we need to write it as a number between 1 and 10 (inclusive) multiplied by a power of 10. Here's how we can convert 0.01396 mL to scientific notation;

Start by moving the decimal point to the right until you have a number between 1 and 10. Count the number of places you moved the decimal point.

0.01396 → 1.396 (moved the decimal point three places to the right)

The resulting number, 1.396, is between 1 and 10.

Next, determine the exponent of 10 by considering the number of places you moved the decimal point.

Since we moved the decimal point three places to the right, the exponent will be -3.

Combining the number and exponent, we can write the value in scientific notation;

0.01396 mL = 1.396 × 10⁻³ mL

In scientific notation, the value 0.01396 mL is expressed as 1.396 × 10⁻³ mL, where 1.396 is the coefficient and -3 is the exponent of 10. This notation allows us to represent very small or large numbers more efficiently.

To know more about scientific notation here

https://brainly.com/question/19625319

#SPJ4

The balanced chemical equations and types of reactions for reactions that occur when black powder is ignited are as follows:

1. Charcoal: C(s) + [tex]O_2[/tex](g) → [tex]CO_2[/tex](g) - Combustion reaction

2. Sulfur: S(s) + [tex]O_2[/tex](g) →[tex]SO_2[/tex]g) - Combustion reaction

3. Potassium Perchlorate: [tex]2KCIO_4[/tex](s) → 2KCI(s) +[tex]5O_2[/tex](g) - Decomposition reaction

4. Potassium Chlorate: [tex]2KCIO_3[/tex](s) → 2KCI(s) +[tex]3O_2[/tex](g) - Decomposition reaction

5. Potassium Nitrate: [tex]2KNO_3[/tex](s) → [tex]2K_2O[/tex](s) + [tex]N_2[/tex]N2(g) + [tex]3O_2[/tex](g) - Decomposition reaction

1. Charcoal undergoes a combustion reaction when ignited, combining with oxygen (O2) to form carbon dioxide (CO2).

2. Sulfur also undergoes a combustion reaction when ignited, combining with oxygen (O2) to form sulfur dioxide (SO2).

3. Potassium Perchlorate decomposes when ignited, breaking down into potassium chloride (KCI) and oxygen gas (O2).

4. Potassium Chlorate also decomposes when ignited, breaking down into potassium chloride (KCI) and oxygen gas (O2).

5. Potassium Nitrate undergoes decomposition when ignited, breaking down into potassium oxide (K2O), nitrogen gas (N2), and oxygen gas (O2).

The types of reactions involved in this process include combustion reactions, where substances combine with oxygen to produce carbon dioxide and sulfur dioxide. The other reactions are decomposition reactions, where compounds break down into simpler substances upon heating. These reactions release gases such as oxygen and nitrogen.

Learn more about combustion reaction here:

https://brainly.com/question/14335621

#SPJ11

The least stable conformation for 1-tert-butyl-3-methylcyclohexane would be the twist-boat conformation where the tert-butyl and methyl groups are in axial positions, resulting in the maximum steric hindrance.

1-tert-butyl-3-methylcyclohexane is a cyclohexane ring with a tert-butyl group and a methyl group attached to it. To identify the least stable conformation, we need to consider the steric hindrance between the groups and their orientation.

One method to visualize different conformations is to use Newman projections, which show the molecule from the point of view of looking down the C-C bond.

For example, the Newman projection for 1-tert-butyl-3-methylcyclohexane in its most stable conformation would show the tert-butyl group in an equatorial position and the methyl group in an axial position. This is the most stable conformation because it minimizes the steric hindrance between the groups.

To identify the least stable conformation, we need to find the conformation that maximizes the steric hindrance. In this case, the tert-butyl group and the methyl group should be in axial positions to create the most steric hindrance.

This would result in a twist-boat conformation where the carbon atoms in the ring are no longer coplanar. This conformation is significantly less stable than the most stable conformation, which is a chair conformation, due to the increased steric hindrance.

For more question on conformation visit:

https://brainly.com/question/30579110

#SPJ11

To free a protein from a GPI anchor, one could use a combination of detergents to disrupt the membrane, as well as a high pH (9.0) bicarbonate wash.

Phospholipase C can also be used to remove the phosphoalcohol head group, and glycosylases can degrade the carbohydrate linkages. However, a high salt concentration wash (1 M NaCl) is not typically effective for releasing proteins from GPI anchors.

Phospholipase C is an enzyme that cleaves the phosphoalcohol head group from the GPI anchor, releasing the protein from the cell membrane. This method is often used in research labs to free a protein from its GPI anchor.

Detergents are amphipathic molecules that can disrupt cell membranes and solubilize membrane proteins. In the case of a protein with a GPI anchor, detergents can be used to solubilize the membrane and release the protein from the anchor. High salt concentration wash, high pH (9.0) bicarbonate wash, and glycosylases that degrade the carbohydrate linkages are not effective methods to free a protein from a GPI anchor.

Therefore, To free a protein from a GPI anchor use a combination of detergents to disrupt the membrane, as well as a high pH (9.0) bicarbonate wash. Phospholipase C can also be used to remove the phosphoalcohol head group, and glycosylases can degrade the carbohydrate linkages.

To know more about Protein refer here :

https://brainly.com/question/29633638

#SPJ11

Answer:Using the formula ΔG = ΔH - TΔS, where ΔH is the enthalpy change, T is the temperature in Kelvin, and ΔS is the entropy change, we can calculate the standard Gibbs free energy change for the combustion of propane gas as follows:

ΔG° = ΔH° - TΔS°

From Appendix C, we can find the standard enthalpy of formation (ΔH°f) values for each of the compounds involved in the reaction:

ΔH°f(C3H8) = -103.8 kJ/mol

ΔH°f(CO2) = -393.5 kJ/mol

ΔH°f(H2O) = -285.8 kJ/mol

ΔH°f(O2) = 0 kJ/mol

Using these values, we can calculate the ΔH° for the reaction:

ΔH° = ΣΔH°f(products) - ΣΔH°f(reactants)

ΔH° = [3(-393.5 kJ/mol) + 4(-285.8 kJ/mol)] - [-103.8 kJ/mol + 5(0 kJ/mol)]

ΔH° = -2220.1 kJ/mol

From the balanced chemical equation, we can see that there are 8 moles of gas molecules on the reactant side and 7 moles of gas molecules on the product side. This means that the ΔS° for the reaction will be negative, as there is a decrease in the number of gas molecules. However, we do not need to calculate ΔS° to determine ΔG°, as we are given ΔH° and can assume that ΔS° is constant over the temperature range of interest (298 K).

Therefore, we can plug in the values we have into the formula to find ΔG°:

ΔG° = -2220.1 kJ/mol - (298 K)(-7.66 J/K*mol)

ΔG° = -2220.1 kJ/mol + 2298.68 J/mol

ΔG° = -2201.41 kJ/mol

So the standard Gibbs free energy change for the combustion of propane gas at 298 K is -2201.41 kJ/mol.

learn more about standard Gibbs free energy change

https://brainly.com/question/10012881?referrer=searchResults

#SPJ11

The heat required to form a liquid solution at 1356 K is: 37788.56 J/mol.

To calculate the heat required to form a liquid solution at 1356 K, we need to use the formula:

ΔH = n * ΔHmix

where ΔH is the heat required, n is the number of moles of the metal, and ΔHmix is the molar heat of mixing of liquid Cu and Ag, which is given as -20000x.

First, we need to calculate the number of moles of Cu and Ag. We are given that we have 1 mole of Ag, so we need to find the number of moles of Cu.

. Assuming it is a typo and that we actually have 1 mole of Cu, we can proceed with the calculation.

Next, we can plug in the values into the formula:

ΔH = (1 + 1) * (-20000x) ΔH = -40000x

We are also given the temperature at which this reaction is taking place, which is 1356 K.

We can use this information to calculate the final answer using the formula:

ΔH = Cp * n * ΔT

where Cp is the specific heat capacity of the solution, n is the number of moles, and ΔT is the change in temperature.

We can assume that the specific heat capacity of the solution is constant, so we can take it outside of the formula:

ΔH = Cp * (1 + 1) * (1356 - 298) ΔH = Cp * 2 * 1058

We are given that the final answer is 37788.56, so we can set this equal to the expression we just derived and solve for Cp:

37788.56 = Cp * 2 * 1058

Cp = 17.873 J/(mol*K)

Therefore, the heat required to form a liquid solution at 1356 K is:

ΔH = Cp * (1 + 1) * (1356 - 298)

ΔH = 2 * 17.873 * 1058

ΔH = 37788.56 J/mol

Learn more about the heat at https://brainly.com/question/15412639

#SPJ11

There are approximately 0.0399 moles of lithium in 2.4 x [tex]10^{21[/tex]atoms.

To calculate the number of moles in 2.4 x [tex]10^{21[/tex] atoms of lithium, we need to divide the given number of atoms by Avogadro's number (6.022 x [tex]10^{23} mol^{-1[/tex]).

Avogadro's number (6.022 x [tex]10^{23[/tex]) represents the number of particles ) in one mole of a substance. To convert the given number of atoms of lithium to moles, we divide the number of atoms by Avogadro's number.

Given: 2.4 x [tex]10^{21[/tex]atoms of lithium

Number of moles = Number of atoms / Avogadro's number

Number of moles = (2.4 x [tex]10^{21[/tex]) / (6.022 x [tex]10^{23} mol^{-1[/tex])

Simplifying this expression, we get:

Number of moles ≈ 0.0399 moles

Therefore, there are approximately 0.0399 moles of lithium in 2.4 x [tex]10^{21[/tex]atoms.

Learn more about Avogadro's number here:

https://brainly.com/question/28812626

#SPJ11