Check all true statements about nonmetals. Group of answer choices
All nonmetals are gaseous at room temperature.
Nonmetals have low melting and boiling points. ✅
Nonmetals are brittle and have a relatively low density. ✅
Nonmetals are good at thermal and electrical conduction.

Using the colored periodic table below, match the group or area to its color.
alkali metals red alkaline ✅
earth metals orange ✅
transition metals white ✅
halogens purple ✅
Nobel gasses teal✅

How many of each subatomic particle are in a neutral atom of Potassium-39? What is its mass number? Potassium is in group 1 and has the symbol "K".
protons 19 ✅
neutrons 20 ✅
electrons 19 ✅
mass number 39✅

Match the ion with its charge.
11 protons, 12 neutrons, 10 electrons = +1 ✅
Groups 17, period 2 = -1 ✅
31 protons, 39 neutrons, 28 electrons = +3✅
Group 2, period 5 = +2

Which best describes a metal such as Silver (Ag)?
Answer: Lustrous, malleable, and forms cations.

Determine if the "quoted" word(s) makes each statement True or False.
Elements that share the most characteristics are found on the periodic table in the same "horizontal period". False ✅
If matter has a higher temperature, that means there will be "more" molecular motion. True✅
If you put a balloon in a freezer, its volume would "increase". False ✅
If you put the balloon into a chamber where there is half the pressure, its volume will "double". True ✅
If you cool down a propane tank, there will be "less" pressure in it. True ✅
The average atomic mass of Aluminum (Al) is "16.00 amu".
False✅
Oxygen's atomic number is "8" therefore it has "8" protons in its nucleus. True✅
An "electron" has the same mass as a neutron. False✅
The nucleus contains "protons and neutrons", virtually all the mass of an atom.✅

Answers

Answer 1

Metals are found towards the left hand side of the periodic table while Nonmetals are found towards the right hand side of the periodic table.

Non metals are found towards the right hand side of the periodic table. They are not all gaseous at room temperature some nonmetals such as iodine are solid at room temperature.

Nonmetals usually have low melting and boiling points, are brittle, have relatively low density and are not good at thermal and electrical conduction.

Potassium - 39 contains 19 protons, 20 neutrons and 19 electrons. Recall that the number of protons and electrons are equal in a neutral atom.

The following is an accurate matching of the ions;

11 protons, 12 neutrons, 10 electrons = +1 - Na^+

31 protons, 39 neutrons, 28 electrons = +3 - Ga^2+

Group 2, period 5 = +2 - Sr^2+

Silver is a lustrous metal.

Elements that share the most characteristics are found on the periodic table in the same "horizontal period". FalseIf matter has a higher temperature, that means there will be "more" molecular motion. TrueIf you cool down a propane tank, there will be "less" pressure in it. TrueIf you put a balloon in a freezer, its volume would "increase". FalseIf you put the balloon into a chamber where there is half the pressure, its volume will "double". TrueThe average atomic mass of Aluminum (Al) is "16.00 amu".  FalseOxygen's atomic number is "8" therefore it has "8" protons in its nucleus. TrueAn "electron" has the same mass as a neutron. FalseThe nucleus contains "protons and neutrons", virtually all the mass of an atom - True

Learn more: https://brainly.com/question/4933048

Answer 2

Answer:

If your answers are the green check marks all of them are correct

Explanation: I took the test


Related Questions

In an earlier chapter you calculated the stiffness of the interatomic "spring" (chemical bond) between atoms in a block of lead to be 5 N/m. Since in our model each atom is connected to two springs, each half the length of the interatomic bond, the effective "interatomic spring stiffness" for an oscillator is 4*5 N/m = 20 N/m. The mass of one mole of lead is 207 grams (0.207 kilograms).
What is the energy, in joules, of one quantum of energy for an atomic oscillator in a block of lead?

Answers

Answer:

8.01e-22

Explanation:

The energy of one quantum of energy for an atomic oscillator in a block of lead is 0.102 J.

Extension produced by one mole of lead

The extension produced by one mole of lead atom is calculated by applying Hooke's law;

F = kx

mg = kx

x = mg/k

x = (0.207 x 9.8) / (20)

x = 0.101 m

Energy stored in the lead block

The Energy of one quantum of energy for an atomic oscillator in a block of lead is calculated as follows;

E = ¹/₂kx²

E = ¹/₂ (20)(0.101)²

E = 0.102 J

Thus, the energy of one quantum of energy for an atomic oscillator in a block of lead is 0.102 J.

Learn more about Hooke's law here: https://brainly.com/question/2648431

Harriet is practicing archery. As she draws back an arrow, the arrow has LaTeX: 34.3 J of elastic potnetial energy, and LaTeX: 0.40 J of gravitational potential energy. How much kinetic energy will the arrow have when it is about to hit the ground?

Answers

The kinetic energy of the arrow when it is about to hit the ground is 34.7 J.

The given parameters;

elastic potential energy of the arrow, Ux = 34.3 Jgravitational potential energy, P.E = 0.4 J

According the principle of conservation of energy, the total potential energy of the arrow will be converted to maximum kinetic energy when the arrow is about to hit the ground.

[tex]K.E = P.E + U_x\\\\K.E = 34.3 \ J \ + \ 0.4 \ J\\\\K.E = 34.7 \ J[/tex]

Thus, the kinetic energy of the arrow when it is about to hit the ground is 34.7 J.

Learn more about conservation of energy here:

https://brainly.com/question/24772394

What is the possible resultant of a 2-unit vector and 4-unit vector?

Answers

Answer:

Explanation:

resultant could have magnitude 4 - 2 ≤ V ≤ 4 + 2 or 2 ≤ V ≤ 6

If θ is the angle of the 4 unit vector, the resultant could have angle φ in the range of

φ = θ ± arcsin (2/4)

θ - 30° ≤ φ ≤ θ + 30°

The possible resultant of a 2-unit vector and 4-unit vector is 6 and 2.

What is a Unit vector?The quantity which has both the magnitude and direction is known as vector.The Examples for Vector quantity is Acceleration, velocity, force and displacement, etc.,.The quantity which has only the magnitude but has no direction, (examples include speed, time and distance) can be known as scalar.

If the magnitude of vector is 1, then it can be the Unit vector.

In the Unit vector, x axis will have the vector of i, y axis will have the vector j, z axis will have the vector k.

When two vectors are in same direction then we add up to get their resultant and in this case resultant would be maximum

R = A + B

R = 4 + 2

R = 6

If vectors are in opposite direction then they provide minimum resultant and in this case we subtract them

R = A - B

R = 4 - 2

R = 2

Thus, the possible resultant are 6 and 2.

Learn more about Possible resultant,

https://brainly.com/question/10655545

#SPJ2

An applied force accelerates a 4.00 kg block to an initial velocity of 11 m/s across a rough horizontal surface, in the positive x direction. As the block reaches 11 m/s, the applied force is removed. The block then slows to 1.5 m/s at a distance of 4.00 m beyond where the applied force was removed. Determine the magnitude and the direction of the non-conservative force acting on the box as it slides.

Answers

The only force opposing the block's sliding as it slows down is friction with magnitude f . By Newton's second law, the net force in this direction is

F = -f = ma = (4.00 kg) a

Assuming constant acceleration a , the acceleration applied by friction is such that

(1.5 m/s)² - (11 m/s)² = 2a (4.00 m)

Solve for the acceleration :

a = ((1.5 m/s)² - (11 m/s)²) / (8.00 m) ≈ -14.8 m/s²

Then the frictional force exerted a magnitude of

-f = (4.00 kg) (-14.8 m/s²)

f59.4 N

and was directed opposite the block's motion.

A block slides down a smooth ramp, starting from rest at a height h. When it reaches the bottom it's moving at speed v. It then continues to slide up a second smooth ramp. At what height is its speed equal to v/2

Answers

Answer:

3h/4

Explanation:

At speed v/2 height will be 3/4 h

What is equation of motion in kinematics?

Equation that describes the motion of point , bodies , and system of bodies without considering the force that cause them to move is called equation of motion in kinematics

When block is at top of first ramp

u=0 ( block was at rest )

a = g ( acceleration due to gravity

using equation of motion                                                                                                                                                                                                                                                                    

2as = v^2 - u^2

2gh = v^2

Then the block continued and reached a speed of v1 = v/2 on second ramp

now , final velocity = v= v1 =[tex]\sqrt{2gh}[/tex] / 2

u= [tex]\sqrt{2gh\\}[/tex]

s= h1

using equation of motion , we get

2as = v^2 - u^2

2(-g)h1 =( [tex]\sqrt{2gh}[/tex]/2)^2 - [tex]\sqrt{2gh}[/tex]

2(-g)h1 = (g h - 4 g h) / 2

h1 = 3/4 h

At speed v/2 height will be 3/4 h

learn more about equation of motion in kinematics:

https://brainly.com/question/14355103?referrer=searchResults

#SPJ2

The speed of light inside a medium is (2.0 x 10^8m/s) What is the index of refraction (n) of the medium?

Answers

Answer:

Refractive index of a medium = Speed of light in vacuum/Speed of light in a medium

1.5 = 3 x 108 / Speed of light in medium

Speed of light in the medium = 3 x 108 /1.5

= 2 x 108 m/s.

Explanation:

Help please..
Kepler’s third law states that:
A. the orbits of the planets are elliptical.
B. the planets move slower when they are closer to the Sun and faster when they are farther from the Sun.
C. the square of the ratio of the periods of any two planets revolving around the Sun is equal to the cube of the ratio of their average distance from the Sun.
D. objects attract other objects with a force that is directly proportional to the product of their masses, and inversely proportional to the square of the distance between them.

Answers

Answer:

c

Explanation:

PLEASE HELP BRAINLIEST TO THE RIGHT ANSWER!!!!!
A 7.8 kg object is suspended by a string from the ceiling of an elevator. The acceleration of gravity is 9.8 m/s^2.

A. Determine the tension in the string if it is accelerating upward at a rate of 1.5 m/s^2. Answer in units of N.

B. Determine the tension in the string if it is accelerating downward at a rate of
1.5 m/s^2

Answers

Gravitational pull downward on the object:  7.8 x 9.8 = 76.44N

A. 7.8 x 1.5 = 11.7N upward force

Tension = 76.44 + 11.7 =  88.14 N

Answer: 88.14 N

B. 76.44 - 11.7 = 64.74N

Answer: 64.74 N

Answer:

88.14 N

64.74 N

Explanation:

Question 3 of 20 :
Select the best answer for the question.
3. Which of the following accurately describes the behavior of water when subjected to
temperature change?
A. The volume of water will decrease if heated from 6°C to 7°C.
B. The volume of water will increase if cooled from 3°C to 2°C.
O C. A mass of water will contract if cooled from 1°C to 0°C.
D. A mass of water will expand if heated from 0°C to 2°C.

Answers

As water cools the volume expands.

Answer: B. The volume of water will increase if cooled from 3°C to 2°C.

Ignoring any effects of dc resistance, what is the total reactance of a 250 mH coil in series with a 4.7 microfarad capacitor at a signal frequency of 60 Hz

Answers

The total reactance of the inductor and the capacitor is 470.1 ohms.

The given parameters;

inductance of the coil, L = 250 mHcapacitance, C = 4.7 μfrequency of the circuit, f = 60 Hz

The inductive reactance of the coil is calculated as follows;

[tex]X_l = \omega L\\\\X_l = 2\pi f L\\\\X_l = 2\pi \times 60 \times 250 \times 10^{-3}\\\\X_l = 94.26 \ ohms[/tex]

The capacitive reactance of the capacitor is calculated as follows;

[tex]X_c = \frac{1}{\omega C} \\\\X_c = \frac{1}{2\pi f C} \\\\X_c = \frac{1}{2\pi \times 60 \times 4.7 \times 10^{-6}} \\\\X_c = 564.31 \ ohms[/tex]

The impedance of the circuit is calculated as follows;

[tex]Z = \sqrt{(X_c - X_l)^2} \\\\Z = X_c - X_l\\\\Z = 564.31 - 94.26\\\\Z = 470.1 \ ohms[/tex]

Thus, the total reactance of the inductor and the capacitor is 470.1 ohms.

Learn more here:https://brainly.com/question/10886711

Comparing energy resources

Answers

Answer:

Sorry, This Photo is not clear.

Your in an escape room. Only its real and your oxygen runs out in 3 minutes unless you solve this problem, The problem :a ball is thrown and travels 30 inches before bouncing, It bounces and travels 50% of the distance traveled. It continues to do this until coming to rest. What is the total distance traveled by ball? Also it's cold and dark and you have no phone nor anyone to ask. You have no ball

Answers

60 inches

because if 30=50% then 60=100% so its 60 inches

The sum of the series allows to find the result for the total distance that the ball bounces is:

            total distance = 59.52 in

A series is a set of things or numbers related by a specific operation.

They indicate that the ball falls from an initial height y₀ = 30 in. and it bounces 50% of the height and the process is repeated until it stops, see attached.

Let's build a table to observe the sequence.

drop   height    rebound

   1        30          15

   2       15            7.5

   3        7.5         3.75

If we call the first term y₀  

The first bounce can be found.

                             y₁ = [tex]\frac{y_o}{2}[/tex]

The second bounces.

                             [tex]y_2 = \frac{y_1}{2} \\y_2 = \frac{y_o}{4}[/tex]

The third bounce.

                             [tex]y_3 = \frac{y_2}{2} \\y_3 = \frac{y_0}{ 8}[/tex]

By observing this table we can construct a series of the form

 

      Total distance = [tex]y_o \ ( 1 + \frac{1}{2} + \frac{1}{4}+ \frac{1}{8} + ... +\frac{1}{2n} )[/tex]

The sum of the serie has a result of

        sum  = 127/64 = 1,984

Let's calculate

     distance total  = 30 1,984

     Distance total = 59.52 cm

In conclusion, using the sum of the series we can find the result for the total distance that the ball bounces is:

            total distance = 59.52 in

Learn more here: https://brainly.com/question/8879163

The fundamental cause of a variable star's change in luminosity is that the star's _____ is changing.

Answers

The radius is changing !

Which is the best way to avoid plagiarism? O use more than one source from your research O repeat information from your sources O present a topic in your own words O understand your topic before you begin writing​

Answers

Answer:

O present a topic in your own words

Explanation:

Plagiarism is using someone else's words or work without giving them proper credit. Presenting a topic in your own words means you are not copying anyone.

Answer:

present a topic in your own words

Explanation:

At a construction site, a 68.0 kg bucket of concrete hangs from a light (but strong) cable that passes over a light friction-free pulley and is connected to an 85.0 kg box on a horizontal roof (see the figure (Figure 1)). The cable pulls horizontally on the box, and a 46.0 kg bag of gravel rests on top of the box. The coefficients of friction between the box and roof are shown. The system is not moving.

Answers

Following are the calculation to the friction force:

Please see the diagram below for an illustration of the forces acting on objects.Therefore, m denotes the mass of a gravel bag, and M denotes the overall mass of the box.Whenever the system is stationary, the friction force on the box equals the tension in the string.

The substring tension force is provided as follows:  

[tex]\to T-m_{1}g=0 \\\\\to T = m_{1}g \\\\[/tex]

       [tex]= (68\ kg) (9.81 \ \frac{m}{s^2} ) (\frac{ 1\ N}{ 1\ kg \cdot \frac{m}{s^2}}) \\\\ = (68 ) (9.81 ) ( 1\ N) \\\\= 667.08\ N \\\\[/tex]

Therefore, the friction force on the box is "667 N".

Learn more:

brainly.com/question/2285391

I need the answer to this question

Answers

Answer:

I don't see anything so you should repost

according to Newton's __ law, an object with no net force acting on it remains at rest or in motion with a constant veloctiy

Answers

Answer:

i think its his law of inertia

Explanation:

this law is about motion


I will mark brainlist

If a wave’s amplitude is 2cm, then its height is equal to:



5 cm.



0 cm



4 cm.



2 cm

Answers

Answer:

4 cm

Explanation:

Amplitude is the measure from the MIDLINE to the peak of the wave....so the wave HEIGHT is twice the ampltude

2 x 2 cm = 4 cm


Carrie is driving a car. Which factors determine the kinetic energy of her car
at this point

Answers

Answer:

The two main factors that affect kinetic energy are mass and speed.

Explanation:

Kinetic energy is the energy that is caused by the motion. The kinetic energy of an object is the energy or force that the object has due to its motion. Your moving vehicle has kinetic energy; as you increase your vehicle's speed, your vehicle's kinetic energy increases.

Have a great day! :D

What is Motion ????? ​

Answers

Answer:

the action or process of moving or being moved.

Explanation:

which an object changes its position over time

A 45 kg figure skater is spinning on the toes of her skates at 1.1 rev/s. Her arms are outstretched as far as they will go. In this orientation, the skater can be modeled as a cylindrical torso (40 kg, 20 cm average diameter, 160 cm tall) plus two rod-like arms (2.5 kg each, 71 cm long) attached to the outside of the torso. The skater then raises her arms straight above her head. In this latter orientation, she can be modeled as a 45 kg, 20-cm-diameter, 200-cm-tall cylinder.

What is her new rotation frequency, in revolutions per second?

Answers

Answer: HOPE THIS HLEP YOU

Explanation:

While forming a 1.5kg aluminum statue, a metal smith heats the aluminum to 2700 degrees C, pours it into a mould, and then cools it to a room temperature of 23.0 degrees C. Calculate the thermal energy released by the aluminum during the process.

Answer is supposed to be: 4.7*10^6 j/kg?

Answers

The heat released by the aluminum during the process is [tex]3.6 \times 10^6 \ J[/tex].

The given parameters:

Mass of the statues, m = 1.5 kgFinal temperature of the status, t₂ = 2700 CTemperature when it is in the  mould, t₁ = 23 ⁰CSpecific heat capacity of aluminum, C = 900

The heat released by the aluminum during the process is calculated as follows;

[tex]Q = mc \Delta t \\\\Q = 1.5\times 900 \times (2700 - 23)\\\\Q = 3.6 \times 10^6 \ J[/tex]

Thus, the heat released by the aluminum during the process is [tex]3.6 \times 10^6 \ J[/tex].

Learn more about heat capacity here: https://brainly.com/question/21406849

In which of the following situations is the Doppler Effect absent?



The source and the observer are moving towards each other.



The observer is moving toward the source.



The source is moving away from the observer.



The source and the observer are both moving with the same velocity.

Answers

Answer:

Correct option is

C

The listener is moving towards the source of sound

The Doppler effect (or the Doppler shift) is the change in frequency or wavelength of a wave (or another periodic event) for an observer moving relative to its source.

So if both listener and source of sound are stationary or are moving with the same velocity that is relative velocity is zero, there won't be any change in frequency.

Thus, in this case, the effect will arise when a listener is moving towards the source of the sound.

please help asap 100 POINTS and BRAINLIEST to best answer.

Answers

D. :)

lmk if im right or wrong

Answer:

D. 5ºC

Explanation:

Not B, because 1k= -457.87 fahrenheit. That means it is also not C. Since the icicles are melting, then that means it is not A either.

5ºC=about 41ºF

Mr foster and his students have launched a small rocket. The rocket has just started moving upward due to the thrust

Answers

The thrust force that cause the small rocket can be defined as a push, Thrust is a force or a push.

From Newton's First Law

Newton's first law can be stated as:

A body will continue ti be arrest or uniform motion except acted upon by an external force

If an object, such as the rocket, is at rest then the forces on it are balanced. It takes an additional force to unbalance the forces and make the object move. If the object is already moving, it takes such an unbalanced force, to stop it, change its direction from a straight line path, or alter its speed.

Newton's Second Law

This law of motion is essentially a statement of a mathematical equation. The three parts of the equation are

Mass (m)Acceleration (a), and force (f)

Using letters to symbolise each part, the equation can be written as follows:

F = ma

Learn more at :

https://brainly.com/question/20337199

Answer:answer in image

Explanation:

mark me brainliest

An empty plastic or glass dish being removed from a microwave oven is cool to the touch. How can this be possible

Answers

Plastic and glass are both poor heat conductors. They are insulators which means their electrons don’t move as freely as conductors.

HIHIHHHHHHHHIHIHIIHIHHHHIHIHIHIHIHIHIHIHIHIHIHIHIHIIH

Answers

Lana rhoades is the best

Answer:

Ok thanks for the points though

Explanation:

A car driving on level ground at 20.0 m/s slams on its brakes and skids to a halt. If the coefficient of kinetic friction between the car’s tires and the road is 0.750, how far does the car skid before stopping? How far would the car have skidded if it had been moving at 40.0 m/s?

Answers

The distance the car has skidded if it had been moving at 40.0 m/s is 27.2m

The linear force acting on the car is opposed by the frictional force. Hence;

[tex]F=F_f[/tex]

[tex]ma = -\mu R\\ma =-\mu mg[/tex]

m is the mass of the car

a is the acceleration

[tex]\mu[/tex] is the coefficient of friction

R is the normal force

Given the following parameters

[tex]a=-\mu g[/tex]

[tex]a =-0.75(9.8)\\a=-7.35m/s^2[/tex]

Get the distance the car has skidded if it had been moving at 40.0 m/s

[tex]v^2=u^2+2as[/tex]

[tex]0^2=20^2+2(-7.35)s\\0=400-14.7s\\s=\frac{400}{14.7}\\s= 27.2m[/tex]

Hence the distance the car has skidded if it had been moving at 40.0 m/s is 27.2m

Learn more here: https://brainly.com/question/15246552

Which strategy should you use if your research question is too broad for the scope of your project? (1 O narrow the focus of research question o add another research question o use the very first source you find for your project O change the scope of your project​

Answers

Answer:

"Narrow the focus of research question"

Explanation:

O Narrow the focus of research question

    This is good! You can still use your question, but focus in on something so you have a proper research project.

O Add another research question

    Would adding another question to an already broad question help? No.

O Use the very first source you find for your project

    If your question is too broad, you should not use whatever you see first as it may be incorrect or does not answer the question

O Change the scope of your project​    

    You could, but if you have a set scope for your project (a) you might not be able to change it (b) you don't need to restart

Have a nice day!

    I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)

- Heather

A phone is dropped from the roof of the school building. The building is 13.2 meters high. How long was the phone in the air before it crashed on the ground?

Answers

Answer:

5scs

Explanation:

phones fall fast so i guessed

Other Questions
____ refers to protecting against unauthorized data disclosure and ensuring the authenticity of the data source. HELPMEPLZZ.Figure ABCD is transformed to obtain figure A'B'CD Part A Write the sequence of transformations that changes figure ABCD to figure A'B'C'D' Explain your answer and write the coordinates of the figure obtained after each transformation. (6 points) Part B: Are the two figures congruent? Explain your answer (4 points) can someone tell me if this is good??? 1 gal = ____ ptA) 8.085 ptB) 8.85 ptC) 88.5 ptD) 0.8085 pteh? The value of a baseball card can be represented by the equation y=3x+39,where x represents the number of years that Robert has owned the card and y represents the total value,in dollars,of the card.What was the value of the card when Robert originally purchased it? Please help please please help me please help please please How to solve this with solution please help asap One of the pioneers of expeditionary photography, the precursor to landscape photography, who began his career as a Civil War photographer was ___________ m = 3; (2, 2) help pls cules son las figuras retricas de "Y te busque por pueblos"?Y te busqu por pueblos,Y te busqu en las nubes,Y para allar tu almaMuchos lirios abr, lirios azulesY los tristes llorando me dijeron:Oh, qu dolor tan vivo!Que tu alma ha mucho tiempo que vivaEn un lirio amarillo!Mas dime cmo ha sido?Yo mi alma en mi pecho no tena?Ayer te he conocido,Y el alma que aqu tengo no es la ma. Write in order least to greatest! If you were a hackathon team manager, how could you best address the conflict created by having more volunteers than open roles Choose the correct verb to complete the expression:____ aux cartesJouerfaire help meeeeeeeeeeeeeeeeeeeeeeeee Find the inverse (pre-calc) como saber la ubicacin de una persona sin que lo sepa Todd and his friends are painting 5 equal sections of a wall. The wall is 10 feet tall, but its length is unknown.Each section will be a different color, so they need to know the area of each section.so , i said 5/10x area = length * width A=10*x a= 10xthen i said you should divide , next i said 10x/5 10x in five sections is 2 in each q1 said area 10*x but x=2 so 10*2=20 is this correct? The data for the distance d, in miles, remaining for a train to travel to its destination t hours after it departs a station areshown in the scatter plot. Which of the following functions best fits the data? weight of 1 kg becomes 1/6 on moon. If radius of moon is 1.7610^6 m, then the mass of moon will be