Answer:
h2o
Explanation:
Need help please I need to select one element for each following families on the periodic table
Answer:
Semi Metals-Boron, Silicon
Noble Gasses-Helium, Argon
Halogens-Clorine, Iodine
Transition metals-Iron, Tungsten
Alkaline earth metals-Calcium, Magnesium
write the formula
fluoride ion
Answer:
F-
Explanation:
Since Fluorine needs one more electron to reach a full octet, it takes in 1 more electron to become an anion. Therefore, with the extra negative charge from the 1 electron, a Fluoride ion has a charge of -1.
Hope this helped!
Answer:
F_
Explanation:
the symbol or formula
is F_
1.00 liter solution contains 0.31 M acetic acid and 0.40 M sodium acetate. If 0.100 moles of calcium hydroxide are added to this system, indicate whether the following statements are true or false. (Assume that the volume does not change upon the addition of calcium hydroxide.)
_______ A. The number of moles of CH3COOH will decrease.
_______ B. The number of moles of CH3COO- will decrease.
_______ C. The equilibrium concentration of H3O will decrease.
_______ D. The pH will decrease.
_______ E. The ratio of [CH3COOH] / [CH3COO-] will remain the same.
Answer:
The answer is the explanation.
Explanation:
The acetic acid, CH3COOH, reacts with calcium hydroxide, Ca(OH)2, producing acetate ion, CH3COO- and water as follows:
2CH3COOH + Ca(OH)2 → 2CH3COO- + 2H2O + Ca²⁺
That means the moles of acetic acid decrease whereas the moles of acetate ion are increased. The ratio of [CH3COOH] / [CH3COO-] is different.
As a base is added, the concentration of H3O+ decreases increasing the pH.
That means:
TRUE A. The number of moles of CH3COOH will decrease.
FALSE B. The number of moles of CH3COO- will decrease.
TRUE C. The equilibrium concentration of H3O will decrease.
FALSE D. The pH will decrease.
FALSE E. The ratio of [CH3COOH] / [CH3COO-] will remain the same.
pasagot po please!!
science po ito pasagot po matino need ko po!!
Explanation:
Efficiency = (output/input)×100%
70% = output/(800 W)
which means
output = 0.70×(800 W) = 560 W
A chemist requires a large amount of 1-bromo-4-phenyl-2-butene as starting material for a synthesis and decides to carry out the following NBS allylic bromination reaction in the presence of UV light. Draw the structures of all of the observed products.
NBS
(C6H5)CH2CH = CHCH3 → ?
CCI4
Draw one additional resonance structure for the species below:
CH3CH=CHCH=CHCH=CHCH2
Answer:
CH 2 CH 3 CHCH = C6H5 + 5 Hydrogen Atoms
I hope I helped you.
Deepest apologies if I was wrong!
Bye!
~ Myaka O.
I am holding a balloon containing 439 mL of gas over my fireplace. The temperature and pressure of the gas inside the balloon is 317.15 K and 0.959 atm, respectively. Suppose I don't want the pressure to change, but I want to the volume to go down to 0.378 L. What is the temperature that I need to reach when I cool down the balloon?
To what temperature (in Celsius) must the balloon be cooled to reduce its volume to 0.378 L if the pressure doesn't change (remained constant)?
Answer:
-0.08 °C
Explanation:
We can solve this problem by using Charles' law, which states that at constant pressure:
V₁T₂ = V₂T₁Where in this case:
V₁ = 439 mLT₂ = ?V₂ = 0.378 L ⇒ 0.378 * 1000 = 378 mLT₁ = 317.15 KWe input the data:
439 mL * T₂ = 378 mL * 317.15 KAnd solve for T₂:
T₂ = 273.08 KFinally we convert 273.08 K to Celsius:
273.08 K - 273.16 = -0.08 °CA chemist adds 370.0mL of a 1.41/molL potassium iodide KI solution to a reaction flask. Calculate the millimoles of potassium iodide the chemist has added to the flask. Be sure your answer has the correct number of significant digits.
Answer: The millimoles of potassium iodide the chemist has added to the flask is 522 millimoles.
Explanation:
Given: Volume of KI = 370.0 mL (1 mL = 0.001 L) = 0.37 L
Molarity of KI solution = 1.41 mol/L
Now, moles of KI (potassium iodide) is calculated as follows.
[tex]Moles = Volume \times Molarity \\= 0.37 L \times 1.41 M\\= 0.5217 mol[/tex]
Convert moles into millimoles as follows.
1 mol = 1000 millimoles
0.5217 mol = [tex]0.5217 mol \times \frac{1000 millimoles}{1 mol} = 521.7 millimoles[/tex]
This can be rounded off to the value 522 millimoles.
Thus, we can conclude that the millimoles of potassium iodide the chemist has added to the flask is 522 millimoles.
Balance this equation, _AlCl3 + _NaOH → _Al(OH)3 + _NaCl
Answer:
AlCl3 + 3NaOH ———>Al(OH)3 + 3NaCl
How to find the number of protons
Answer:
No of protons is equal to the atomic number.
Answer:
atomic number
Explanation:
how many atoms of one formula unit in Fe2O3
Answer:
5 atoms form one formula unit of Fe2O3
Explanation:
2 atoms of Fe (Iron)
and 3 atoms of O ( Oxygen)
so total = 3 + 2
= 5
Answer:
fe203 the right answer is thus
list some applications of chemistry in your dail life
Chemistry and chemical reactions are not just limited to the laboratories but also the world around you.
Chemistry in Food Production:
Plants produce food for themselves through photosynthesis; which is a complex chemical reaction in itself. The chemical reaction that takes place in photosynthesis is the most common and vital chemical reaction.
6 CO2 + 6 H2O + light → C 6H12O6 + 6 O2
Chemistry in Hygiene:
Right before you consume your food, you make it a point to wash your hands with soap. Isn’t it? The cleaning action of soap is based on its ability to act as an emulsifying agent. Soaps are fatty acids salts of sodium or potassium; produced by a chemical reaction called saponification. Soaps interact with the grease or oil molecule, which, in turn, results in a cleaner surface.
The Chemistry of an Onion:
Ever wondered why you shed tears while chopping an onion? This also happens because of the underlying chemistry concepts. As soon as you slice an onion, sulfenic acid is formed from amino acid sulfoxides. Sulfenic acid is responsible for the volatile gas, propanethiol S-oxide, that stimulates the production of tears in the eyes.
Chemistry in Baking:
Who does not like to eat fluffy freshly baked bread? Baking soda is an efficient leavening agent. The addition of baking soda to food items before cooking leads to the production of carbon dioxide (CO2); which causes the foods to rise. This whole process of rising of baked good is called chemical leavening.
Chemistry in Food Preservatives:
In case you ever read the ingredients on the bottle of ketchup, jams or pickles, you might be surprised to see a never-ending list of chemicals. What are they? These chemicals are called food preservatives; which delay the growth of microorganisms in foods. The chemical food preservatives not only prohibit the growth of bacteria, virus, fungi but also hinder the oxidation of fats, which is responsible for making the foods rancid. The most common chemical food preservatives are sodium benzoate, sorbic acid, potassium sorbate, calcium sorbate, sodium sorbate, propionic acid, and the salts of nitrous acid.
Chemistry in Digestion
The moment you put food in your mouth, a number of different chemical reactions start in your digestive tract. Saliva contains the enzyme amylase, which is responsible for breaking down carbohydrates, the stomach starts producing hydrochloric acid, the liver releases bile and the list of compounds released during digestion goes on. How do they work? All these enzymes undergo chemical reactions so that proper digestion, as well as assimilation of the food, occurs.
The Working of a Sunscreen
Before going out on a sunny day, you make it a point to wear sunscreen. Even the principle, behind the working of a sunscreen, has a chemistry background. The sunscreen uses a combination of organic and inorganic compounds to act as a filter for incoming ultraviolet rays. Sunblocks, on the other hand, scatter away UV light; so that it is unable to penetrate deep into the skin. Sunblocks contain complex chemical compounds like zinc oxide or titanium oxide, which prevent the UV rays to invade deeper into the skin.
Chemistry in Rust Formation
With time, your iron instruments start developing an orange-brown flaky coating called rust. The rusting of iron is a type of oxidation reaction. The atoms in the metal iron undergo oxidation and reduction; causing rusting. The formation of verdigris on copper and the tarnishing of silver are also the other everyday examples of chemical reactions. The chemical equation underlying rusting is:
Fe + O2 + H2O → Fe2O3. XH2O
Hope it helps.
A barium hydroxide solution is prepared by dissolving 2.29 g of Ba(OH)2 in water to make 46.6 mL of solution. What is the concentration of the solution in units of molarity?
Concentration: 0.287 M
The barium hydroxide solution is used to titrate a perchloric acid solution of unknown concentration. Write a balanced chemical equation to represent the reaction between barium hydroxide and perchloric acid.
Chemical Equation:
If 25.5 mL of the barium hydroxide solution was needed to neutralize a 8.99 mL aliquot of the perchloric acid solution, what is the concentration of the acid?
Concentration:
Answer:
0.287 M
Ba(OH)₂ + 2 HClO₄ ⇒ Ba(ClO₄)₂ + 2 H₂O
1.62 M
Explanation:
Step 1: Calculate the concentration of Ba(OH)₂
We will use the following expression.
[Ba(OH)₂] = mass Ba(OH)₂/ molar mass Ba(OH)₂ × liters of solution
[Ba(OH)₂] = 2.29 g/ 171.34 g/mol × 0.0466 L = 0.287 M
Step 2: Write the balanced neutralization equation
Ba(OH)₂ + 2 HClO₄ ⇒ Ba(ClO₄)₂ + 2 H₂O
Step 3: Calculate the reacting moles of Ba(OH)₂
25.5 mL of 0.287 M Ba(OH)₂ react.
0.0255 L × 0.287 mol/L = 7.32 × 10⁻³ mol
Step 4: Calculate the reacting moles of HClO₄
7.32 × 10⁻³ mol Ba(OH)₂ 2 mol HClO₄/1 mol Ba(OH)₂ = 0.0146 mol HClO₄
Step 5: Calculate the concentration of HClO₄
0.0146 moles of HClO₄ are in 8.99 mL of solution.
[HClO₄] = 0.0146 mol/0.00899 L = 1.62 M
hợp chất nào có khả năng là hợp chất ion cao nhất ?
A Al2O3
B ScCl3
C NO2
D CCl4
Answer:
B
Explanation:
hợp chất nào có khả năng là hợp chất ion cao nhất ?
A Al2O3?
B
Discuss the unique properties of carbon as a group 4a element
Answer:
Carbon is dull, have a low density, and are poor conductors of heat.
Explanation:
Carbon is a non-metal, therefore bearing properties of a non-metal element.
A coffee cup has a heat capacity of 62.6 - If the coffee cup's temperature increases by 1.20°C, how much heat has it
absorbed?
Select the correct answer below:
?
Answer:
75.12 J
Explanation:
Applying,
Q = CΔT................ equation 1
Where Q = amount of heat, C = Heat capacity, ΔT = temperature rise.
From the question,
Given: C = 62.6 J/K, ΔT = 1.20°C
Substitute these values into equation 1
Q = 62.6(1.20)
Q = 75.12 J
Hence the amount of heat it absorbed is 75.12 J
The normal freezing point of a certain liquid Xis-7.30°C but when l02. g of iron(III) chloride (FeCl3) are dissolved in 650. g of Xthe solution freezes at -9.9°C instead. Use this information to calculate the molal freezing point depression constant Kf of X.
Answer:
2.7 °C.kg/mol
Explanation:
Step 1: Calculate the freezing point depression (ΔT)
The normal freezing point of a certain liquid X is-7.30°C and the solution freezes at -9.9°C instead. The freezing point depression is:
ΔT = -7.30 °C - (-9.9 °C) = 2.6 °C
Step 2: Calculate the molality of the solution (b)
We will use the following expression.
b = mass of solute / molar mass of solute × kilograms of solvent
b = 102. g / (162.2 g/mol) × 0.650 kg = 0.967 mol/kg
Step 3: Calculate the molal freezing point depression constant Kf of X
Freezing point depression is a colligative property. It can be calculated using the following expression.
ΔT = Kf × b
Kf = ΔT / b
Kf = 2.6 °C / (0.967 mol/kg) = 2.7 °C.kg/mol
Toothpastes containing sodium hydrogen carbonate (sodium bicarbonate) and hydrogen peroxide are widely used. Write Lewis structures for the hydrogen carbonate ion and hydrogen peroxide molecule, with resonance forms where appropriate.
Answer:
See explanation and images attached
Explanation:
The first image shows the structure of hydrogen peroxide. It does not exist as resonance structures. The structure and properties of the molecule can wholly be explained on the basis of a single Lewis structure.
However, the structure of the bicarbonate ion in sodium bicarbonate can not be completely described by a single Lewis structure. Hence, two resonance structures are shown for the bicarbonate ion. In each case, Na^+ is the counter ion.
At 50.0 oC, a reinforced tank contains 675.5 grams of gaseous argon and 465.0 g of gaseous molecular chlorine with a total pressure of 4.00 atm. Calculate the following:
a. How many moles of Ar are in the tank?
b. How many moles of Cl, are in the tank?
c. Total moles of gas in the tank.
d. The mole fraction of Ar.
e. The mole fraction of Cl2.
f. The Partial Pressure of Ar.
g. The Partial Pressure of Cl2.
Answer:
For (a): The moles of Ar is 16.94 moles
For (b): The moles of [tex]Cl_2[/tex] is 16.94 moles
For (c): The total number of moles in a tank is 23.47 moles
For (d): The mole fraction of Ar is 0.722
For (e): The mole fraction of [tex]Cl_2[/tex] is 0.278
For (f): The partial pressure of Ar is 2.888 atm
For (g): The partial pressure of [tex]Cl_2[/tex] is 1.112 atm
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
For (a):Given mass of Ar = 675.5 g
Molar mass of Ar = 39.95 g/mol
Plugging values in equation 1:
[tex]\text{Moles of Ar}=\frac{675.5g}{39.95g/mol}=16.91 mol[/tex]
For (b):Given mass of [tex]Cl_2[/tex] = 465.0 g
Molar mass of [tex]Cl_2[/tex] = 70.9 g/mol
Plugging values in equation 1:
[tex]\text{Moles of }Cl_2=\frac{465.0g}{70.9g/mol}=6.56 mol[/tex]
For (c):Total moles of gas in the tank = [16.91 + 6.56] mol = 23.47 mol
Mole fraction is defined as the moles of a component present in the total moles of a solution. It is given by the equation:
[tex]\chi_A=\frac{n_A}{n_A+n_B}[/tex] .....(2)
where n is the number of moles
For (d):Moles of Ar = 16.94 moles
Total moles of gas in the tank = 23.47 mol
Putting values in equation 2, we get:
[tex]\chi_{Ar}=\frac{16.94}{23.47}\\\\\chi_{Ar}=0.722[/tex]
For (e):Total mole fraction of the system is always 1
Mole fraction of [tex]Cl_2[/tex] = [1 - 0.722] = 0.278
Raoult's law is the law used to calculate the partial pressure of the individual gases present in the mixture.
The equation for Raoult's law follows:
[tex]p_A=\chi_A\times p_T[/tex] .....(3)
where [tex]p_A[/tex] is the partial pressure of component A in the mixture and [tex]p_T[/tex] is the total partial pressure of the mixture
For (f):We are given:
[tex]\chi_{Ar}=0.722\\p_T=4.00atm[/tex]
Putting values in equation 3, we get:
[tex]p_{Ar}=0.722\times 4.00atm\\\\p_{Ar}=2.888atm[/tex]
For (g):We are given:
[tex]\chi_{Cl_2}=0.278\\p_T=4.00atm[/tex]
Putting values in equation 3, we get:
[tex]p_{Cl_2}=0.278\times 4.00atm\\\\p_{Cl_2}=1.112atm[/tex]
The pH of a certain orange juice is 3.33.Calculate the +ion concentration.
Answer:
[tex]4.67\times 10^{-4}[/tex]
Explanation:
Given that,
The pH of a certain orange juice is 3.33.
We need to find the +ion concentration.
We know that,
[tex]pH=-log[H^+][/tex]
So,
[tex]3.33=-log[H^+]\\\\\[H^+=10^{-3.33}\\\\=4.67\times 10^{-4}[/tex]
So, the +ion concentraion is equal to [tex]4.67\times 10^{-4}[/tex].
heating, the particle _______________ increases as more __________ __________ is added
Answer: what are the choices?!.
Explanation:
the empirical formula of a compound is CH2 N2 and its molecular mass is 126.0. what is the molecular formula of the compound
Step 1: Represent a molecular formula.
[tex]\text{molecular formula} = (\text{CH}_{2}\text{N}_{2})_{n}[/tex]
Step 2: Calculate the empirical mass.
empirical mass = (12.0 g/mol × 1) + (1.0 g/mol × 2) + (14.0 g/mol × 2)
empirical mass = 42.0 g/mol
Step 3: Divide the molecular mass by the empirical mass.
[tex]n = \frac{\text{molecular mass}}{\text{empirical mass}}[/tex]
[tex]n = \frac{\text{126.0}}{\text{42.0}}[/tex]
[tex]n = 3[/tex]
Step 4: Multiply the subscripts by the value of n to obtain the molecular formula.
[tex]\text{molecular formula} = (\text{CH}_{2}\text{N}_{2})_{3}[/tex]
[tex]\boxed{\text{molecular formula} = \text{C}_{3}\text{H}_{6}\text{N}_{6}}[/tex]
[tex]\\[/tex]
#ILoveChemistry
#ILoveYouShaina
A crop is sprayed with a pesticide to prevent infestation and damage from insects. However, the next season the same pesticide fails to prevent the insects from damaging the crop. Why
Answer:
Farmers spray to mitigate crop damage caused by pests. A pest is any biological organism, including weeds, pathogens, and arthropods, that interferes with the production of crops affecting quality and/or yield. ... Pesticides work in many different ways by affecting their target, whether it be a weed, pest, or disease.
Explanation:
this is my answer❤︎
Draw the structures and provide the names of all the isomeric alcohols that have the molecular formula C4H10O Draw the structures of (a) 6-methyl-3-heptanol and (b) trans-2-methylcyclohexanol
Answer:
Draw the structures and provide the names of all the isomeric alcohols that have the molecular formula C4H10O.
Draw the structures of (a) 6-methyl-3-heptanol and (b) trans-2-methylcyclohexanol
Explanation:
Isomers are compounds with the same molecular formula but different structural arrangements of atoms.
The given molecule is:
C4H10O.
The possible isomeric alcohols structures are shown below:
Structure of (a) 6-methyl-3-heptanol:
The root word -hept indicates that the main carbon chain has seven carbons.
-ol suffix indicates the presence of alcohol functional group at third carbon.
The 6-methyl prefix indicates the presence of methyl group as the substituent at the sixth position of the main carbon chain.
The structure of 6-methyl-3-heptanol is shown below:
The structure of trans-2-methyl cyclohexanol is shown below:
(Ch3ch2)2choh oxidize with k2cr2o7?
g The boiling of water is a Question 4 options: chemical and physical damage chemical change because a gas (steam) is given off chemical change because heat is needed for the process to occur physical change because the water merely disappears physical change because the gaseous water is chemically the same as the liquid
Answer:
physical change because the gaseous water is chemically the same as the liquid
Explanation:
Matter can be defined as anything that has mass and occupies space. Any physical object that is found on earth is typically composed of matter. Matter are known to be made up of atoms and as a result has the property of existing in states.
Generally, matter exists in three (3) distinct or classical phases and these are; solid, liquid and gas.
A physical change can be defined as a type of change that only affects the physical form of a chemical substance (matter) without having any effect on its chemical properties. Thus, a physical change would only affect the physical appearance and properties of a chemical substance (matter) but not its chemical properties.
This ultimately implies that, a physical change result in a change of matter from one form or phase (liquid, solid or gas) to another without a corresponding change in chemical composition.
Hence, the boiling of water is considered to be a physical change because the gaseous water is chemically the same as the liquid i.e there isn't any changes in chemical composition of water when boiling.
Which of the following is the most plausible explanation for the fact that the saponification of the triacylglycerol in the passage resulted in four different fatty acid salts?
a. The triacylglycerol molecule consisted of four different fatty acid units.
b. Glycerol was transformed into a fatty acid salt under the reaction conditions.
c. One of the fatty acid salts was unsaturated, and it completely isomerized under the reaction conditions.
d. One of the fatty acid salts was unsaturated, and a small percentage isomerized under the reaction conditions.
Answer: The correct option is C (One of the fatty acid salts was unsaturated, and it completely isomerized under the reaction conditions).
Explanation:
Fats and oils belongs to a general group of compounds known as lipids. Fatty acids are weak acid and are divided into two:
--> Saturated fatty acids: These have NO double bonds in their hydrocarbon chain, and
--> Unsaturated fatty acids: These have one or more double bonds in their hydrocarbon chain.
SAPONIFICATION is defined as the process by which fats and oil is hydrolyzed with caustic alkali to yield propane-1,2,3-triol and the corresponding sodium salt of the component fatty acids. During this process, One hydroxide ion is required to hydrolyze one ester linkage of a triacylglycerol molecule. Because there are three ester linkages in a triacylglycerol, three equivalents of sodium hydroxide will be needed to completely saponify the triacylglycerol. This explains the reason why saponification of the triacylglycerol iresulted in four different fatty acid salts.
A student is adding DI water to a volumetric flask to make a 50% solution. Unfortunately, he was not paying attention and filled the flask past the calibration mark. Instead of starting over, the student decides to continue with the experiment. How will the student's results be affected by his mistakes
Answer:
His results will be skewed because there was more water than stock solution. Which would cause the percentage solution to be less than 50% therefore the density would be less than the actual value.
Explanation:
The solution will have percentage less than that of 50%. Therefore the density would be less than the actual value.
Suppose there should be 50 mL of the solution, and he added 60 mL. So 10 mL of the solution is added more.
Suppose the mass of the solute is m.
Originally, the density is = [tex]$\frac{m}{50}$[/tex] [tex]\left(\frac{\text{mass}}{\text{volume}}\right)[/tex]
Now after adding extra 10 mL , the density becomes [tex]$\frac{m}{60}$[/tex].
Therefore, [tex]$\frac{m}{50}>\frac{m}{60}$[/tex]
So the density decreases when we add more solution.
An atom of 24/11 na decays by gamma decay which atom is left after the decay
Answer:
Hello There!!
Explanation:
The atom is still 24Na.
hope this helps,have a great day!!
~Pinky~
You decide to share some sugar sweetened fruit juice with your friend. You divide the fruit equally into two glasses. Then an additional equal volume of water is added to glass 1. Which glass would have the lower molarity?
Answer:
Glass 1
Explanation:
Molarity is measured in moles of substance per liter.
For the sake of calculations, let's say that each glass contains 1 mole of juice and 1 liter after it is divided between the glasses. If you add an equal amount of water to glass 1 ( another liter), you now have:
Glass 1 = 1 mole / 2 liters = 0.5 M
Glass 1 = 1 mole/ 1 liter = 1 M
So glass 1 will have a lower molarity
How does the behavior of a high-energy particle compare to a low-energy particle?
Answer:
The problem of energy exchange between waves and particles, which leads to energization of the latter, in an unstable plasma typical of the radiation belts. The ongoing Van Allen Probes space mission brought this problem among the most discussed in space physics. A free energy which is present in an unstable plasma provides the indispensable condition for energy transfer from lower energy particles to higher-energy particles via resonant wave-particle interaction. This process is studied in detail by the example of electron interactions with whistler mode wave packets originated from lightning-induced emission. We emphasize that in an unstable plasma, the energy source for electron energization is the energy of other particles, rather than the wave energy as is often assumed. The way by which the energy is transferred from lower energy to higher-energy particles includes two processes that operate concurrently, in the same space-time domain, or sequentially, in different space-time domains, in which a given wave packet is located. In the first process, one group of resonant particles gives the energy to the wave. The second process consists in wave absorption by another group of resonant particles, whose energy therefore increases. We argue that this mechanism represents an efficient means of electron energization in the radiation belts.
Explanation:
Fun facts:
In the process of energy transfer between two groups of particles both processes operate simultaneously, and if the lower energy part of plasma distribution gives energy to the wave while the higher‐energy part absorbs the wave enrgy, then the wave‐mediated energy transfer from lower energy particles to higher‐energy ...