complete and balance the molecular equation for the reaction between aqueous solutions of silver nitrate and hydrochloric acid, and use the states of matter to show if a precipitate forms.

The structure is consistent with this 'H NMR spectrum is CH;OCCH;. Option a is correct answer.

The 'H NMR spectrum doesn't provide enough information to definitively determine the structure of the molecule. However, based solely on given options, the structure that is most consistent with the chemical shift of the proton signal at around 3.7 ppm is option A, CH3OC(=O)CH2CH3.

This is because the chemical shift of the proton on the OCH3 group is typically found in this region, and the presence of the carbonyl group would also affect the chemical shift of nearby protons. However, additional spectroscopic data and/or chemical tests may be necessary to confirm the structure.

To know more about the H NMR spectrum, here

brainly.com/question/27755499

#SPJ4

--The complete question is, Which structure is consistent with this 'H NMR spectrum? CH;OCCH; (B) COCH;CH; (C) OCCH,CH; (D) OCCH; CH;--

The mass of lead based on data is 97.65 grams. The mean atomic mass of lead can be founded in periodic table of elements.

Given:

Therefore:

First, calculate the moles of lead.

[tex]\begin{array}{ll}\sf n &\sf = \dfrac{N}{L}\\\\&\sf = \dfrac{2.84\times 10^{23}}{6.02 \times 10^{23}} \\\\&\sf = 0.471~moles.\end{array}[/tex]

Second, calculate the mass of lead.

[tex]\begin{array}{ll}\sf g&\sf = n \times Ar\\\\&\sf = 0.471 \times 207\\\\&\sf = 97.65~grams.\end{array}[/tex]

Learn more about representation of Avogadro's number on:
https://brainly.com/question/30168626

The principal quantum number is n = 4. Angular momentum quantum number l = 3. The number of degenerate orbitals based on the magnetic quantum number is 7 . The number of radial nodes is 0 .

maximum number of electrons in the entire shell are 14.

The 4f orbital is a sublevel of the fourth energy level, so the principal quantum number is n = 4.

The angular momentum quantum number, l, is equal to 3 for the f subshell. This means that the electrons in the 4f orbital have l = 3.

For the magnetic quantum number, ml, the range is -l to +l, so for the 4f orbital, there are 2l + 1 = 7 possible values of ml (-3, -2, -1, 0, 1, 2, 3), which means there are 7 degenerate orbitals.

The number of radial nodes can be calculated using the formula n - l - 1, so for the 4f orbital, there are (4 - 3 - 1) = 0 radial nodes.

The maximum number of electrons in the entire shell can be determined using the formula 2n^2, where n is the principal quantum number. For n = 4, the maximum number of electrons in the 4th shell is 2(4)^2 = 32. However, since the 4f orbital is a sublevel within the 4th shell, the maximum number of electrons that can occupy the 4f orbital is given by the Pauli exclusion principle, which states that no two electrons in an atom can have the same set of four quantum numbers. Therefore, the maximum number of electrons that can occupy the 4f orbital is 2 x 7 = 14.

Learn more about angular momentum here:

https://brainly.com/question/29897173

#SPJ4

The soluble in water substances are:Ch3CHO is more soluble in water than CH3CH2CH3.

Ch3CO2H is more soluble in water than (CH3)3COCH3.

(CH3)3CCH2OH is more soluble in water than CH3(CH2)6OH.

In comparison to (CH3)3CCOOH, CH3(CH2)4COOH is more soluble in water.

CH3CH2OH is more soluble in water than CCl4.

CH3OH is more soluble in water than CH3CH2OH.

Ch3CHO (Acetaldehyde) is more soluble in water than Ch3CH2CH3 (Propane). This is due to Acetaldehyde containing a polar C=O bond which is hydrogen bonding with water molecules and is thus more soluble.

Ch3CO2H (Acetic Acid) is more soluble in water than Ch3(CO)OCH3 (Acetone). This is due to Acetic Acid containing an acidic hydrogen atom which is hydrogen bonding with water molecules and is thus more soluble.

(CH3)3CCH2OH (2-Methyl-2-propanol) is more soluble in water than Ch3(CH2)6OH (Hexanol). This is due to 2-Methyl-2-propanol containing a polar OH bond which is hydrogen bonding with water molecules and is thus more soluble.

Ch3(CH2)4COOH (Butyric Acid) is more soluble in water than (CH3)3CCOOH (2,2-Dimethylpropionic Acid). This is due to Butyric Acid containing an acidic hydrogen atom which is hydrogen bonding with water molecules and is thus more soluble.

Ch3CH2OH (Ethanol) is more soluble in water than CCl4 (Carbon Tetrachloride). This is due to Ethanol containing a polar OH bond which is hydrogen bonding with water molecules and is thus more soluble.

Ch3OH (Methanol) is more soluble in water than Ch3CH2OH (Ethanol). This is due to Methanol containing a strong hydrogen bond which is hydrogen bonding with water molecules and is thus more soluble.

learn more about Acetaldehyde Refer:brainly.com/question/15230495

#SPJ4

1.852 grams of H₂ are produced when 67.12 grams of HCl are reacted with copper.

A mole is a important unit of measurement. 1 mole =  6.023 × 10²³ particles.

The term mole is defined as the amount of matter containing 6.023 × 10²³ molecules.

For each two moles of HCl there is one mole of hydrogen.

So first convert the grams to moles.

Then find formula mass of HCl

The mass of hydrogen = 1.007 amu

mass of chlorine = 35.453 amu

Then 1.007 + 35.453 = 36.46 grams

Hence, one mole of HCl = 36.46 grams/mol

67.12g ÷ 36.46 = 1.84 moles

Therefore, 1.84 mols / 2

= 0.92 moles of hydrogen

Now to convert the moles into grams by multiply the number of moles of hydrogen by the atomic mass of hydrogen

= 0.92 mols × 2.014 g/mol

= 1.852 grams of hydrogen

We get 1.852 grams of hydrogen.

Thus, 1.852 grams of H₂ are formed.

To learn more about the mole, follow the link;

https://brainly.com/question/26416088

#SPJ9

Answer:The green elements on the table you are referring to are called Noble gases or Inert gases.

Explanation:

The green elements on the table you are referring to are called Noble gases or Inert gases. They each have two electrons in their outer shell, which gives them a full and stable electron configuration.

Earlier calculations were made because the ion product (IP) is bigger than the Ksp value. [tex](1.5625 \times 10-9)[/tex] A precipitate will occur because the solution is supersaturated with PbI2.

Ions are atoms or molecules that have an unequal number of electrons and protons, resulting in a net electrical charge.

Atoms are electrically neutral because they normally include an equal number of positively and negatively charged protons and electrons. Yet, an atom becomes an ion and acquires electrical charge when it absorbs or loses one or more electrons.

The solubility product constant (Ksp) expression for lead (II) iodide (PbI2) is:

[tex]Ksp = [Pb2+][I-]^2[/tex]

We know the concentration of I- is [tex]1.25 \times 10-3 M[/tex] When the solution is saturated, but we don't know the concentration of Pb2+.

However, we can assume that the solubility of PbI2 is low and that the concentration of Pb2+ is much less than [tex]1.25 \times 10-3 M[/tex]. Therefore, we can use the concentration of I- to calculate the Ksp as follows:

[tex]Ksp = [Pb2+][I-]^2[/tex]

[tex]Ksp = x(1.25\pm \times 10-3)^2[/tex]

[tex]Ksp = 1.5625 \pm \times 10-9x[/tex]

using this Ksp value, we must ascertain whether a precipitate will occur when 350 mL of [tex]5.5 \times 10-2 M[/tex] 250 mL of lead (II) nitrate (Pb(NO3)2) and

[tex]4.8 \times 10-2[/tex] M iodide of sodium (NaI).

We must first figure out the original Pb2+ and I- concentrations in the combined solution. Since [tex]Pb(NO3)^2[/tex]is a potent electrolyte that totally dissociates into the ions Pb2+ and NO3- in water. Hence, the initial Pb2+ concentration is:

[tex][Pb2+] = (5.5 \times 10-2 M) \times (0.350 L/0.6 L) = 3.208 \times 10-2 M[/tex]

Similar to this, NaI totally separates into Na+ and I- ions in water due to its strong electrolyte nature. As a result, I- has the following initial concentration:

[tex][I-] = (4.8 \times 10-2 M) \times (0.250 L/0.6 L) = 2.000 \times 10-2 M[/tex]

Now determine the mixed solution's PbI2 ion product (IP) as follows.

[tex]IP = [Pb2+][I-]^2[/tex]

[tex]IP = (3.208 \times 10-2 M)(2.000 \times 10-2 M)^2[/tex]

[tex]IP = 2.563 \times 10-8[/tex]

Therefore, the ion product (IP) exceeds the Ksp value that we previously determined. [tex](1.5625 \times 10-9)[/tex], a precipitate will form because the solution is supersaturated with PbI2.

Learn more about solubility here:

https://brainly.com/question/9942939

#SPJ1

3-methyl-2-Pentene is the correct answer. 3-methyl-2-pentene is an alkene with a molecular formula of C_5H_10. It is a colorless liquid with a pungent odor.

Alkenes are a class of organic compounds that contain a carbon-carbon double bond. They are unsaturated hydrocarbons, meaning that they have fewer hydrogen atoms than their corresponding saturated hydrocarbons.

The general formula for an alkene is Cn[tex]H_{2}[/tex]n, where "n" represents the number of carbon atoms in the molecule. The simplest alkene is ethene, which is also called ethylene and has the chemical formula [tex]C_{2} H_{4}[/tex]. Alkenes are important intermediates in many industrial processes and are used in the production of a variety of products including plastics, synthetic rubber, and solvents.

To learn more about alkenes, click the given link ;

https://brainly.com/question/13910028

#SPJ4

Amphipathic molecules contains both hydrophilic and hydrophobic portions.

Amphipathic molecules are defined as those molecules that are both hydrophilic as well as hydrophobic in nature. For example, phospholipid is an amphipathic molecule which have a hydrophilic head while its acyl tail being hydrophobic.

All of the lipid molecules present in the cell membranes are amphipathic in nature—that is, they have a hydrophilic (“water-loving”) or polar end and a hydrophobic (“water-fearing”) or nonpolar end.

The carbohydrate that forms the hydrophilic head, and the fatty acids form the hydrophobic tail. Phospholipids in structure, generally these lipid molecules are found in the cell membrane.

Learn more about Amphipathic molecules from the link given below.

https://brainly.com/question/13378292

#SPJ4

The empirical formula of any ionic compound can be determined by balancing the charges on the ions to form a neutral compound.

Here are four binary ionic compounds that could be formed from the given ions:

These are just a few examples of binary ionic compounds that could be formed from the given ions.

Learn more about ionic compounds :

https://brainly.com/question/29005103

#SPJ4

The statement that, the particles are so small compared with the distances between them that the volume of the individual particles can be assumed to be zero is true.

This statement is a reasonable approximation for the behavior of particles in a gas or a dilute solution, where the individual particles are separated by relatively large distances. In these cases, the particles are typically much smaller than the average distance between them, so their volume can be assumed to be negligible.

However, in condensed phases such as liquids and solids, the particles are much closer together, and their volumes cannot be ignored.

To know more about the particles, here

brainly.com/question/13009091

#SPJ4

Coenzyme Q10's main biochemical function is as a cofactor in the electron-transport chain, which is one of the series of redox processes required for the creation of adenosine triphosphate.

A coenzyme is a chemical that collaborates with an enzyme to start or support the enzyme's operation. It may be viewed as a supporting molecule in a biological process.

Coenzyme Q10 is crucial for the functioning of all human tissues and organs since the majority of cellular processes depend on an appropriate supply of adenosine triphosphate (ATP).

A fat-soluble substance produced by the body, coenzyme Q10 can only be found in trace amounts in the food.

Coenzyme Q10 is essential for the formation of adenosine triphosphate and mitochondrial oxidative phosphorylation (ATP).

While its amount in our bodies declines with advancing age, it is crucial for optimum bodily functioning and must be consumed through a healthy diet.

Coenzyme Q10 regulates the different mediated inhibition, which enhances lipid metabolism and reduces obesity.

Thus, sufficient Q10 consumption prevents oxidative stress and delays the progression of aging.

To learn more about the coenzyme, follow the link;

https://brainly.com/question/29386956

#SPJ1

4 m is the wavelength of Wave B.

What is wavelength?

The Greek letter lambda (λ), which represents wavelength, is frequently used. When describing modulated waves, their sinusoidal envelopes, or waves created by the interference of several sinusoids, the term wavelength is also occasionally used.

What is frequency ?

The number of full wave cycles that pass a spot in a unit of time is described as frequency. The frequency in SI is measured in Hertz (Hz).

Therefore, 4 m is the wavelength of Wave B.

Learn more about wavelength from the given link.

https://brainly.com/question/16051869

#SPJ1

The curved arrow representation for the provided resonance structure is attached.

The negative charge (lone pair) is moved towards the hybridized carbon and the pi electrons also move towards another carbon, so the delocalization takes place and forms new C=O, C=C bond, and then oxygen atom gets the negative charge.

The lone pairs on nitrogen atom moved to the hybridized carbon and another pi bond moves towards the oxygen atom. This is shown with the curved arrows.

Note that necessary diagrams are attached.

Learn more about electrons on:

https://brainly.com/question/26084288

#SPJ1

The volume of the unit cell of element X is approximately 1.785 × 10⁸ picometers cubed (pm³).

In a body-centered cubic unit cell, there are atoms at each of the eight corners of the cube, and one atom in the center of the cube. Each atom at the corner is shared by eight unit cells, while the atom at the center is contained within a single unit cell.

The distance from one corner of the cube to the opposite corner is equal to four times the radius of the atom (i.e. 4 × 151 pm = 604 pm), which is known as the body diagonal of the cube.

Therefore, the length of one side of the cube is given by:

a = (4/√3) × r

= (4/√3) × 151 pm

≈ 554.6 pm

The volume of the unit cell is then given by:

V = a³

= (554.6 pm)³

≈ 1.785 × 10⁸ pm³

Learn more about volume of unit cell here: https://brainly.com/question/28191873

#SPJ1

The monomer that can conceivably form isotactic polymers is [tex]C=CH_2 CH_3[/tex]. Option (d) is correct.

Isotactic polymers are stereoregular polymers in which all the substituents in each repeating unit are on the same side of the polymer chain. The vinyl monomer [tex]C=CH_2 CH_3[/tex] has a relatively simple structure that can pack efficiently and promote isotactic polymerization.

For example, monomer (a) has no chirality center and no stereoisomers, so it cannot form isotactic polymers. Monomer (b) and (c) have chirality centers, but their structures are more complex, making it more difficult to achieve isotactic polymerization. Monomer (e) has multiple chirality centers and can form stereoisomers, but it is not a vinyl monomer and is less likely to form isotactic polymers.

To know more about the isotactic polymers, here

brainly.com/question/13860566

#SPJ4

--The complete question is, Which of the following monomers can conceivably form isotactic polymers?--

Labeling of the ends of the polar molecules feted as partially positive or partially negative are:

a. The difference in electronegativity between H and F is relatively high (around 1.9), so the bond is quite polar. F is more electronegative than H, so the fluorine end is partially negative and the hydrogen end is partially positive.

b. The difference in electronegativity between H and Br is moderate (around 0.7), so the bond is somewhat polar. Br is more electronegative than H, so the bromine end is partially negative and the hydrogen end is partially positive.

c. The difference in electronegativity between N and O is relatively small (around 0.5), so the bond is somewhat polar. O is more electronegative than N, so the oxygen end is partially negative and the nitrogen end is partially positive.

d. The difference in electronegativity between C and O is relatively large (around 1.0), so the bond is quite polar. O is more electronegative than C, so the oxygen end is partially negative and the carbon end is partially positive.

To know more about polar molecule here

https://brainly.com/question/29976693

#SPJ4

Vinegar (acetic acid) and baking soda (sodium bicarbonate) react in an endothermic reaction to produce sodium acetate, carbon dioxide, and water. The statement that justifies classifying the reaction as endothermic is  The total potential energy of the products is less than the total potential energy of the reactants. The correct answer is D.

An endothermic process is one in which the heat of the system increases as a result of absorbing heat from the environment and transferring it to the system. The reactants have higher potential energy than the products.

Baking soda and vinegar react by absorbing heat from the surrounding environment, resulting in the production of carbon dioxide, sodium acetate, and water.

The reactants in this kind of reaction absorb heat, increasing their potential energy, which is high in comparison to the potential energy of the products created.

Learn more about endothermic reactions here:

brainly.com/question/25923072

#SPJ4

Answer: Phosphorus

Explanation:

Dr. James Jerger, collaborated to develop the digital hearing aid

The development of the digital hearing aid was the result of a collaboration between several individuals and organizations. One of the key figures in the development of digital signal processing technology, which forms the basis of modern digital hearing aids, was Thomas Stockham, a physicist and engineer who worked at the Massachusetts Institute of Technology (MIT) in the United States.

In the years since the first digital hearing aids were developed, many other researchers, engineers, and clinicians have contributed to the ongoing development and refinement of these devices. Today, digital hearing aids are widely used around the world and have helped millions of people with hearing loss to improve their communication and quality of life.

Learn more about hearing aid:https://brainly.com/question/4721450
#SPJ1

The O- group is a special type of oxygen-containing functional group called an ether. The oxygen atom of the ether group is bonded to two carbon atoms, so the IR absorption frequency for this functional.

Carbon atoms are the basic building blocks of organic molecules and are essential to all known forms of life. Carbon atoms are a unique element because they have the ability to form strong bonds with other elements, such as hydrogen, oxygen and nitrogen. This allows them to form an incredibly wide variety of molecules, from simple sugars to complex proteins.

1. Ethanol (Alcohol): C3H6O

Functional Group: OH (Hydroxyl), IR Absorption Frequency: 3350 cm-1

2. Acetone (Ketone): C3H6O

Functional Group: C=O (Carbonyl), IR Absorption Frequency: 1715 cm-1

3. 2-Propanol (Alcohol): C3H6O

Functional Group: OH (Hydroxyl), IR Absorption Frequency: 3350 cm-1

4. Dimethyl Ether (Ether): C3H6O

Functional Group: O- (Ether), IR Absorption Frequency: 1090 cm-1

To learn more about carbon atoms

https://brainly.com/question/27860158

#SPJ1

An atom's paramagnetic activity increases with the amount of unpaired electrons in its outermost shell.

According to the atom's quantum mechanical concept, there are specific orbitals, or three-dimensional regions of space, where electrons are more likely to be found. A set of four quantum numbers can be used to describe each electron's characteristics within the quantum atom.

The quantum mechanical or wave mechanical model, on which our current understanding of the atom is based, is one such model. An electron in an atom may only exist in a limited set of states or energies, which is akin to a standing wave.

Consider the number of unpaired electrons in each of the given atoms be: Li-1, N-3, Ni-2 and Te-2

At least one unpaired electron must be present in the valence shell of an atom for it to be paramagnetic. Due to the spin pairing of every electron in their outermost shells, Ba and Hg are not paramagnetic.

An atom's paramagnetic activity increases with the amount of unpaired electrons in its outermost shell.

The complete question is:

One bit of evidence that the quantum mechanical model is "correct" lies in the magnetic properties of matter. Atoms with unpaired electrons are attracted by magnetic fields and thus are said to exhibit Para magnetism. The degree to which this effect is observed is directly related to the number of unpaired electrons present in the atom. Consider the ground-state electron configuration for . Would this atom be expected to be paramagnetic, and how many unpaired electrons are present? It has unpaired electron(s). Consider the ground-state electron configuration for . Would this atom be expected to be paramagnetic, and how many unpaired electrons are present?

To learn more about quantum mechanical model refer to:

https://brainly.com/question/11852353

#SPJ4

The maximum extensively used initiators produce unfastened radicals (reactive atoms or organizations of atoms that include bizarre numbers of electrons).

Examples encompass peroxides and aliphatic azo compounds used to polymerize vinyl chloride, methyl methacrylate, and different monomers.  Radical polymerization of vinyl monomers (styrene, methyl methacrylate, and vinyl acetate) changed into done in diverse nanochannels of porous coordination polymers (PCPs), wherein relationships among the channel length and polymerization behaviors, which include monomer reactivity, molecular weight, and stereostructure. Radical initiators are applied in business methods which include polymer synthesis. Typical examples are molecules with a nitrogen-halogen bond, azo compounds, and natural and inorganic peroxides.

To learn more about radical polymerization check the link below:

https://brainly.com/question/30125690

#SPJ4

The wavelength (in nanometers) of a photon emitted by a hydrogen atom when its electron drops from the n = 5 to n = 3 state is 1280nm.

The distance between two subsequent crests or troughs of the wave is what is meant by the term wavelength. Lambda () is a Greek letter that stands for wavelength.

The wavelength is the distance between one wave's "crest" to another wave's "crest." We can calculate the wavelength by comparing the "trough" of one wave to the "trough" of another wave.

These are the calculations for the energy (E) difference between two shells:

ΔE = -RH [(1 / nf2) - (1/ni2)] ΔE

R Rydberg’s constant (1.0973731568539(55)×107m−1)

nf and ni Integers where n2>n1.

ΔE = -RH [(1 / nf2) - (1/ni2)] ΔE

= -2.18 x10-18 J [(1/32) - (1/52)] ΔE

= -1.55 x10-19 JE

hc/λλ = hc/Eλ

where

λ =The wavelength of the photon.

hc/λλ = hc/Eλ

= [(6.63 x10-34 J.s.) x (3.00 x1017 nm/s)] /(1.55 x10-19 J)

λ = 1280nm

To learn more about the wavelength, follow the link;

brainly.com/question/4112024

#SPJ4

The balanced equation of the reaction is option d. The  limiting reactant here is KBr and excess reactant is calcium nitrate. The percent yield of the reaction is 93 %.

The limiting reactant in a reaction is the reactant which is fewer in amount and as soon it is consumed, the reaction stops. For the given reaction, option d is the balanced chemical equation.

One mole of calcium nitrate requires 2 moles of KBr.

molar mass of calcium nitrate = 164 g/mol

no.of moles in 75 g = 75/164 = 0.457

molar mass of KBr = 118.9 g/mol

no.of moles 95 g = 95/118.9 = 0.798

0.457 moles of calcium nitrate needs its twice amount that is 0.9 moles of KBr. Hence, KBr is the limiting reactant and calcium nitrate is excess reactant here.

2 moles or 237.8 g of KBr gives 2 moles or 202 g of potassium nitrate. Then, 95 g of KBr will gives:

(95×202)/237.6 = 81.3 g

actual yield = 75.75 g

then percent yield  = 75.75 /81.3 × 100 = 93 %.

0.79 moles of KBr needs its half or 0.399 moles of calcium nitrate. But we have 0.45 moles. Thus, excess amount is

(0.45 - 0.399) × 164 g/mol = 9.5 g.

Therefore, the 9.5 g of excess reactant will be left over.

Find more on limiting reactants:

https://brainly.com/question/28938721

#SPJ1

Answer:

Explanation:

Synthesis

2H2 + O2 ---> 2 H2O

Decomposition

CaCO3----> CO2 + CaO

Single replacememt

Na + KCl---> KCl + Na

Double replacement

AgNO3 + NaCl --> AgCl + NaNO3

A) The electric force on the electrons will act downward.

B) So to keep the electrons in a straight line, the magnetic force should act to the left.

C) So the magnetic force on them will be perpendicular to their velocity and will act to the left, as we found in part (b).

D)The magnitude of the magnetic field is 3.64 x 10^-5 T.

To calculate the magnitude of the electric force in newtons, we can use the formula: F = qE where F is the force, q is the charge of the electron, and E is the magnitude of the electric field. The charge of the electron is -1.6 x 10^-19 C, and the magnitude of the electric field is given as E = 5.00 x 10^6 N/C. So we have:

F = (-1.6 x 10^-19 C)(5.00 x 10^6 N/C) = -8.00 x 10^-13 N

Since the electric force is acting downward, we should give it a negative sign to indicate its direction.

To calculate the magnitude of the magnetic field, we can use the formula: F = Bqv where F is the magnetic force, B is the magnitude of the magnetic field, q is the charge of the electron, and v is the speed of the electron. We are given the speed of the electron as 110 m/s, and we know from part (b) that the magnetic force is acting to the left with a magnitude equal to the electric force, so we can set F = 8.00 x 10^-13 N. The charge of the electron is -1.6 x 10^-19 C, so we have:

8.00 x 10^-13 N = B(-1.6 x 10^-19 C)(110 m/s)

Solving for B, we get:

B = 3.64 x 10^-5 T

The given question is incomplete, the complete question is

An electron beam is directed horizontally into a region where there is both an clectric field and a magnetic field. The electrie field points upward and has a magnitude E-SNC, as shown in the figure. While moving through the region the electron beam contine in in a horizontal straight line with speed of 110 ms Otheexpertta.com d d d d - 20% Part() in which direction does the electric force act on the electrons ? Downward Correct 20% Part () In order to keep the electrons in a straight line, in which direction abould the magnetic force on the electrons aet? UV Cerrect! 20** Part() What should the direction of the magnetic field be in order to produce the force described in part (by? Isto the screen Cart! 204 Part (d) Calculate the numerical value of the magnitude of the electric force in newtons F- N Grade Sun Ded Potential 7 E 6 Subs Atem pamp sin COMO tan con atan con sinho cosho tail ) cotando Degrees O Radians 4 3 12 0 pl Tim Harem. Feedki o deductie en 20. Parte) Calculate the magnitude of the magnetic field in telif the electron comes in a horizontal straight line.

To know more about field here

https://brainly.com/question/28453368

#SPJ4

From the table of plots of solubility, it is clear that, the solubility of ammonia in 100 g of water is 55 g at 20°C. Then, the solubility at the same temperature for 200 g of water is 110 g.

Solubility of a substance in a solvent at a specified temperature is the fraction of its concentration that can be dissolved in  the solvent. Solubility depends on the bond type of the substance, its molecular mass, temperature and pressure.

For most of the salts, as the temperature increases, solubility increases. But for some compounds solubility decreases with temperature. From the graph, it is clear, that, the solubility of ammonia decreases with temperature.

The solubility of ammonia at 20 °C in 100 g of water is 55 g. Then, at this temperature, the solubility of ammonia in 200 g of water will be 110 g. Then, to form a saturated solution, 110 g or above of ammonia can be added.

Find more on solubility:

https://brainly.com/question/29589228

#SPJ9

Table G of your question is attached below:

The most common way to express solution concentration is the molarity

The molality of a solution is uniform to the moles of solute divided by the mass of solvent in kilograms, while the molarity of a solution is alike to the moles of solute divided by the volume of solution in liters.

Molarity is the number of moles of solute per liter of solution. For example, if you dissolve table salt in water, salt is the solute, and water is the solution. One mole of sodium chloride weighs 58.44 grams. If you diffuse 58.44 grams of NaCl in one liter of water, you have a one-molar solution, reduced to 1M

So we can conclude that Molarity is defined as the integer of moles of solute per liter of solution.

Learn more about Molarity here: https://brainly.com/question/26873446

#SPJ1