Complete the sentences to explain at what p range the ionization state in the previous part exists Match the words in the left column to the appropriate blanks in the sentences on the right. Reset Help 2.10 4.07 7.40 9.47 protonated deprotonated The ionization state will occur at a pH range of to This ionization state occurs in this range because, when the pH is greater than the pKs (by more than one unit), the compound is at that location. When the pH is less than the pKa. the compound is at that location

a. The number of moles of CO (g) in the container will remain the same after the temperature of the equilibrium mixture is increased at constant volume. This is because the change in temperature will not alter the equilibrium concentration of the substances involved, and so the number of moles of CO (g) will remain the same.

b. The number of moles of CO (g) in the container will decrease after the volume of the container is decreased at a constant temperature. This is because decreasing the volume of the container will decrease the number of substances present in the system, and thus decrease the number of moles of CO (g).

c. The number of moles of CO (g) in the container will remain the same after the graphite pellets are pulverized. This is because pulverizing the graphite pellets does not change the number of moles of CO (g) in the container, and thus the number of moles of CO (g) will remain the same.

Read more about the topic of equilibrium:

https://brainly.com/question/517289

#SPJ11

The oscillation frequency of an electric dipole in a uniform electric field can be expressed as:

f = (1/2π) x (1/√(I/2P x E))

Oscillation can be defined simply as a variation that is repetitive (in time) of measures about a value which is central, or a value between two or more accounts of different states. The oscillation occurs not only in the mechanical system but it also occurs in dynamic systems areas of every scientific founding.

The oscillation frequency is given by

f = (1/2π) x (1/√(I/2P x E))

where:

This expression assumes small amplitude oscillations and is derived from the equation of motion of a simple harmonic oscillator. In this case, the torque on the dipole due to the electric field is proportional to the displacement of the dipole from its equilibrium position, and the restoring torque due to the rotational inertia of the dipole is proportional to the angular displacement. By equating these torques, we get the equation of motion of the dipole in terms of the oscillation frequency, rotational inertia, dipole moment, and electric field.

Learn more about oscillation on:

https://brainly.com/question/12622728

#SPJ11

In the fasted state, fatty acyl-CoA is transported across the mitochondrial membrane. The transport of fatty acids via carnitine palmitoyltransferase I (CPTI) can be directly inhibited by Malonyl-CoA.

Malonyl-CoA- Malonyl-CoA is a metabolite found in all living organisms, including humans. It is a molecule produced by the carboxylation of acetyl-CoA and is the first intermediate in fatty acid biosynthesis. Malonyl-CoA is a potent inhibitor of carnitine palmitoyltransferase I (CPTI), which is found on the outer mitochondrial membrane.

Carnitine palmitoyltransferase I- Carnitine palmitoyltransferase I (CPTI) is a crucial enzyme that controls the transportation of long-chain fatty acids into the mitochondria, where they undergo β-oxidation to produce energy. CPTI is located on the outer mitochondrial membrane and is responsible for catalyzing the rate-limiting step in fatty acid oxidation.

Function of β-oxidation- β-oxidation is a metabolic process in which fatty acids are broken down into acetyl-CoA molecules, which can then enter the citric acid cycle and produce energy. The process occurs in the mitochondria, and it begins with the activation of the fatty acid to a fatty acyl-CoA by fatty acyl-CoA synthetase.

The fatty acyl-CoA is then transported across the mitochondrial membrane via carnitine palmitoyltransferase I (CPTI) and is broken down through a series of reactions by β-oxidation enzymes. Finally, the resulting acetyl-CoA molecules enter the citric acid cycle and are oxidized to produce ATP.

To learn more about "mitochondrial membrane", visit:  https://brainly.com/question/13912115

#SPJ11

The carbon that is attached to the oxygens in CH₃COOH (acetic acid) is sp2 hybridized. This is because it is attached to three atoms (one oxygen and two hydrogens) and has a trigonal planar geometry.

The molecule with the greatest dipole moment is CH₂Cl₂(dichloromethane) because it has a tetrahedral geometry and the two C-Cl bonds are oriented in opposite directions, creating a net dipole moment. The other molecules (CCl₄, CF₄, and Br₂CCl₂) are all symmetric and have zero dipole moment.

A chemical concept known as hybridization describes the bonding and geometry of molecules. It entails combining atomic orbitals to create hybrid orbitals, which can more accurately capture the bonding in a molecule. The number of hybrid orbitals formed is equal to the number of atomic orbitals combined. Atomic orbitals with similar energy levels are merged to create the hybrid orbitals. An atom's geometry, bond angles, and polarity can all be impacted by hybridization, which can then have an impact on the molecule's reactivity and physical characteristics. Foreseeing the forms and characteristics of molecules as well as explaining their chemical behaviour requires an understanding of atom hybridization.

Learn more about hybridization here:

https://brainly.com/question/30010106

#SPJ4

Answer: The organic reactant is 1,3-propanedithiol. This molecule contains two thiol groups (-SH) separated by a three-carbon chain. In the presence of iodine, the thiol groups are oxidized to the corresponding disulfide (-S-S-) bonds. One of the thiol groups can then be protected with a suitable reagent such as acetone or dimethoxyethane to give a thioketal.

Protecting groups are commonly used in organic synthesis to selectively mask certain functional groups. They allow for specific reactions to occur at desired sites without interfering with other functional groups present in the molecule. In the case of the thioketal product shown, the protecting group used is likely an acetone ketal. This involves reacting one of the thiol groups with acetone in the presence of acid to form a ketal, which protects the thiol from further reaction while allowing the other thiol to react with iodine.

Know more about acetone ketal here:

https://brainly.com/question/14789253

#SPJ11

Oxygen (O₂) is always a reactant in a combustion reaction. Combustion is a type of c₂hemical reaction where a substance reacts with oxygen to produce heat and light. The general equation for combustion is: fuel + O₂ -> CO₂ + H₂O + heat.

When a substance reacts with oxygen, it undergoes a sort of chemical reaction known as combustion, which usually results in the production of heat and light. Burning is a common name for this reaction, which plays a crucial role in numerous industrial, transportation, and energy-related applications. There are many fuels that can be used in combustion, including wood, other organic materials, and fossil fuels (coal, oil, and natural gas). Depending on the fuel and combustion circumstances, the byproducts of combustion are typically carbon dioxide (CO₂) and water vapour (H₂O), along with a variety of additional gases and particles. Exothermic, or heat-releasing, combustion reactions can be used for a variety of things, including heating, power production, and propulsion. Yet, burning also results in the production of greenhouse gases that fuel climate change.

Learn more about combustion here:

https://brainly.com/question/15117038

#SPJ4

Antibodies against nicotinic acetylcholine receptors (nAChR), present at neuromuscular junction (NMJ), can affect function of junction by interfering with normal signaling between nerve and muscle.

Antibodies against nicotinic acetylcholine receptors (nAChR), which are present at neuromuscular junction (NMJ), can affect the function of junction by interfering with normal signaling between nerve and muscle.

At NMJ, the nerve terminal releases acetylcholine (ACh), which binds to nAChR on muscle cell membrane, leading to depolarization of muscle cell and muscle contraction. If antibodies bind to nAChR, they can block or reduce the number of available receptors for ACh, leading to decrease or even complete loss of the normal muscle response to nerve stimulation.

This can result in muscle weakness, fatigue, and even paralysis, depending on the severity of antibody binding and amount of functional nAChR remaining at the NMJ.

To know more about neuromuscular junction, refer

https://brainly.com/question/17076742

#SPJ1

The mass of silver bromide formed when 35.5 ml of 0.184 m silver nitrate is treated with an excess of hydrobromic acid is 9.89 g.

When 35.5 mL of 0.184 M silver nitrate is treated with an excess of hydrobromic acid, the reaction forms silver bromide and a salt containing bromide ions. The mass of silver bromide that is formed can be calculated using the following equation:

Mass = Concentration x Volume x Molecular Weight

Where:

Therefore, the mass of silver bromide formed is:

Mass = 0.184 x 35.5 x 187.81 = 9.89 g

Learn more about acids: https://brainly.com/question/25148363

#SPJ11

Answer:

(A).Liquid water has a specific heat of 4.184J/g.k

(B)Volume = 39,420 LSo, kilograms= 44.7 kg

Explanation:

(a) The specific heat at constant volume of nitrogen (N2) gas is 20.8 J/K.mol. Compare it with the specific heat of liquid water.Liquid water has a specific heat of 4.184 J/g.K

(b) For the same amount of heat, we would be able to warm 44.7 kg of 20.0 °C air to 30.0 °C. Air has a molar mass of 28.97 g/mol. We can use the ideal gas law to determine the volume of 44.7 kg of air at 20.0 °C and 1.00 atm pressure.

We know that 1 mol of a gas at STP (standard temperature and pressure) occupies 22.4 L. Since air is 100% N2, its molar mass is 28.0 g/mol. The ideal gas law is given by PV = nRT where P = pressure, V = volume, n = number of moles, R = the universal gas constant, and T = temperature.

Substituting values, we have:

PV = nRTV = nRT/PAt

20.0 °C and 1.00 atm, T = 293 K and P = 1.00 atm.

Therefore, we have:

n = mass/molar mass = 44.7 kg / (28.97 g/mol) = 1543.8 mol

R = 0.082 L.atm/K.mol

Substituting these values into the equation, we have:

V = (1543.8 mol)(0.082 L.atm/K.mol)(293 K) / (1.00 atm)

V = 39,420 LSo, 44.7 kg of 20.0 °C air occupies a volume of 39,420 L at 20.0 °C and 1.00 atm pressure.

To know more about ideal gas law refer here: https://brainly.com/question/30458409#
#SPJ11

Ozone is considered harmful in the troposphere but beneficial in the stratosphere. It is a pollutant in the troposphere but protects against UV radiation in the stratosphere.

In the stratosphere, ozone is thought to be advantageous but damaging in the troposphere. Ozone is a pollutant and a component of smog in the troposphere, which can harm crops and cause respiratory issues in people. Ozone, however, plays a crucial role in the stratosphere because it filters and absorbs dangerous UV light from the sun. This aids in shielding Earth's life from the negative effects of UV radiation. Lead, nitrogen oxides, and sulfur dioxide are also harmful in the stratosphere. They may all cause air pollution, acid rain, and other environmental issues and are all bad for the troposphere and stratosphere.

learn more about troposphere here:

https://brainly.com/question/13497783

#SPJ4

The magnitude of F2 which will cause the reaction Cy at the bearing C to be equal to zero is 600 lb.

Let's assume the direction of F2 is x-axis and direction of Cy is y-axis. Apply the force balance equation along x-axis:

F2 = F1 + F3F3 = F2 - F1

As we know, the force along the y-axis is zero. So, there is no force balance equation along y-axis. Let's apply the moment balance equation about point A (taking clockwise moments as positive):

F1 × 4 + F2 × 6 = F3 × 2F1 × 4 + F2 × 6 = (F2 - F1) × 2

Now substitute F1 = 300 lb in the above equation.

300 × 4 + F2 × 6 = (F2 - 300) × 2300 × 4 + 6F2 = 2F2 - 600F2 = 600 lb

So, the magnitude of F2 which will cause the reaction Cy at the bearing C to be equal to zero is thus calculated to be 600 lb.

More on force: https://brainly.com/question/18596795

#SPJ11

Lewis acids are Fe3+, AlBr3 and F. Lewis bases are NH3 and BF3.

The Lewis acid and Lewis base from among the reactants in each of the given chemical equations are given below:

Fe3+ (aq) + 6NH3(aq) = Fe(NH3)6 (aq): Fe3+ is the Lewis acid and NH3 is the Lewis base.

AlBr3 + NH3 = H3NAIBr: AlBr3 is the Lewis acid and NH3 is the Lewis base.

F-(aq) + BF3(aq) = BF4- (aq): F is the Lewis acid and BF3 is the Lewis base.

A Lewis acid is a compound or a chemical species that can accept a pair of electrons from another compound or chemical species. A Lewis acid-base reaction involves an acid that accepts an electron pair from a base. The electron-pair acceptor is referred to as a Lewis acid because it is accepting electrons from another atom or molecule.

A Lewis base is a compound or a chemical species that can donate a pair of electrons to another compound or chemical species. The Lewis acid-base reaction is one in which a base donates a pair of electrons to an acid. The electron-pair donor is referred to as a Lewis base because it is donating electrons to another atom or molecule.

Learn more about Lewis acid and base: https://brainly.com/question/28299444

#SPJ11

The free moving charged particles in a Carbon electrode made of electrode are electrons.

An electrode is a substance that conducts electricity, which means it allows electric charges to travel through it. During electrolysis, an electrode is used to provide an electric current for the reduction and oxidation reactions that take place.

A carbon electrode is a type of electrode that is made of carbon. Carbon electrodes are commonly used in batteries and fuel cells because they are lightweight and can easily conduct electricity.

Electrons are free moving charged particles in a carbon electrode made of electrode. Electrons are negatively charged subatomic particles that orbit the nucleus of an atom. They are found in the outer shells of atoms and can move freely from one atom to another when they are excited by an electric current.

When an electric current is passed through a carbon electrode, the electrons in the outer shells of the carbon atoms are excited and become free moving charged particles. This allows the carbon electrode to conduct electricity and to participate in reduction and oxidation reactions during electrolysis.

For more such questions on electrode, click on:

https://brainly.com/question/28302450

#SPJ11

TRUE. The codons in mRNA, which are collections of three nucleotides, stand for certain amino acids that are combined to produce proteins during translation.

In order to create a protein, the information contained in mRNA must be deciphered during the process of translation. The genetic code that regulates the order in which amino acids are put together to make proteins is found in the sequence of nucleotides in mRNA known as codons. A codon is made up of three nucleotides, each of which stands for an amino acid or a stop signal that denotes the completion of protein synthesis. The ribosome scans the mRNA's codon sequence during translation and matches each codon with the appropriate amino acid. A functional protein is produced when a chain of amino acids that have been joined together by peptide bonds folds into a three-dimensional structure. Hence, the codons in mRNA play a critical role in determining the amino acid sequence of a protein.

learn more about codons here:

https://brainly.com/question/9382652

#SPJ4

The nitrification basin's counterpart, the aeration basin, is located in the wastewater treatment facility.

Anything that will either float or easily settle out by gravity is removed during primary treatment. It involves the mechanical procedures of comminution, grit removal, screening, and sedimentation. Screens are made of long, thin metal bars with tight spacing.

In secondary wastewater treatment methods, microorganisms are utilized to biologically remove contaminants from wastewater. Secondary biological processes can be either aerobic or anaerobic, and they all make use of various bacterial communities.

To know more about nitrification visit:-

https://brainly.com/question/17425312

#SPJ1

Balanced redox equation involves the transfer of electrons between species, with the species that loses electrons (the reducing agent) being oxidized and the species that gains electrons (the oxidizing agent) being reduced.

Oxidation is a chemical reaction in which a substance loses electrons, resulting in an increase in its oxidation state. In other words, oxidation involves the transfer of electrons from one species to another, with the species that loses electrons being oxidized. This process often involves the addition of oxygen, but it can also occur without the presence of oxygen.

For example, when iron reacts with oxygen to form rust, iron is oxidized because it loses electrons and oxygen is reduced because it gains electrons:

4 Fe + 3 O2 → 2 Fe2O3

In this reaction, iron goes from an oxidation state of zero to an oxidation state of +3, indicating that it has lost three electrons. Oxygen goes from an oxidation state of zero to an oxidation state of -2, indicating that it has gained two electrons.

To know more about oxidized visit :

https://brainly.com/question/19761029

#SPJ1

The given reaction N2 (g) + 3H2 (g) à 2NH3 (g) is an example of combination reaction.

As a result, it is a combination reaction.

For more information on combination reaction kindly visit to

https://brainly.com/question/3664113

#SPJ1

The pka for the HA²⁻ is about 9.67. This can be calculated through bisection method as it is a conjugate base.

HA²⁻ is the conjugate base of H₃A, a triprotic acid with pKa values of 2.50, 5.75, and 9.25. It can be written as:

Step 1: Find the pH at which the species Ha²⁻ has half the proton concentration of A³⁻. For a triprotic acid with:

pKa1 < pKa2 < pKa3, the concentration of A³⁻ can be calculated using the following equation:

[A³⁻] = ( [H⁺]³) / ([H⁺]³ + K₁[H⁺]² + K₁K₂[H⁺]+ K₁K₂K₃)

Let x be the concentration of HA²⁻. Then, [A³⁻] = ( [H⁺]³ ) / ([H⁺]³ + K₁[H⁺]² + K₁K₂[H⁺] + K₁K₂K₃) = ( [H⁺]³ ) / ([H⁺]³ + [H⁺]²[0.00316] + [H⁺][0.00316 × 0.01] + [0.00316 × 0.01 × 0.0001] )

Thus, [A³⁻] = [H⁺]³/ ([H⁺]³ + 3.16 × 10⁻⁶ [H⁺]² + 3.16 × 10⁻⁸ [H⁺] + 3.16 × 10⁻¹¹)

Let [A³⁻] = [HA²⁻]/2 = x/2

Thus,  [H⁺]³ / ([H⁺]³ + 3.16 × 10⁻⁶ [H⁺]² + 3.16 × 10⁻⁸ [H⁺] + 3.16 × 10⁻¹¹) = x/2

Since, [H⁺] = 10-pH, and pH = pKa + log10([A-]/[HA]),

we can rewrite the expression as: (10-pH)³ = x/2 (3.16 × 10⁻⁶ + × 2 3.16 × 10⁻⁸ + × 3.16 × 10⁻¹¹ +1)

Rearranging, we get: ×3.16 × 10⁻⁶ + ×2 3.16 × 10⁻⁸ + × 3.16 × 10⁻¹¹ +1 - (2 (10-pH)3) = 0

We can solve this using numerical methods such as Newton-Raphson or bisection method. For simplicity, we can use an online calculator to get the answer. We get: pH = 4.33Thus, the pKa value of Ha2- is:pKa = 14 - pH = 9.67

Learn more about pH here:

https://brainly.com/question/491373

#SPJ11

Answer:

Explanation: If the red litmus paper is inserted into the solution and the color remains unchanged, it indicates that the solution is likely a neutral solution or a solution with a pH close to 7. This means that it may contain either water or a salt solution.

To further confirm whether the solution contains a salt or water, we can perform a simple test using blue litmus paper. We can dip a blue litmus paper into the solution, and if it turns red, it indicates that the solution is acidic. If it remains blue, it indicates that the solution is basic.

If the blue litmus paper also does not change its color, it means that the solution is neutral or has a pH close to 7, which supports the possibility that the solution may contain either water or a salt solution.

To further test whether the solution contains a salt or not, we can perform a flame test. We can take a small amount of the solution and place it on a platinum wire loop and hold it in a Bunsen burner flame. If the flame produces a characteristic color, it indicates that the solution contains a salt. The characteristic color of the flame will depend on the metal ion present in the salt.

Overall, based on the initial test with the red litmus paper, the solution is likely neutral or close to neutral, and additional tests with blue litmus paper and flame test can be used to confirm whether the solution contains a salt or water.

The net ionic equation for the reaction that occurs when aqueous solutions of Na₂CO₃ and HCl are mixed is:

2 H⁺(aq) + CO₃²⁻(aq) → H₂O(l) + CO₂(g). Thus, option C is correct.

A net ionic equation is a chemical equation that depicts only the species that are involved in a reaction in an aqueous solution.

The spectator ions, Na⁺ and Cl⁻, do not participate in the reaction and are present on both sides of the equation.

The H₂CO₃ formed in the reaction quickly decomposes into H₂O and CO₂.

Therefore, the net ionic equation only includes the species that actually participate in the reaction.

2 H+(aq) + CO32-(aq) → H2O(l) + CO2(g).

Learn more about ionic equations here:

https://brainly.com/question/28193640

#SPJ11

The pH in the intermembrane space of the mitochondria should be lower compared to the matrix due to the C. higher concentration of protons in the intermembrane space.

Mitochondria are organelles found in eukaryotic cells that play a vital role in producing the energy required to sustain cellular activity. Mitochondria produce energy from food and oxygen, which they use to generate ATP, the primary source of cellular energy.

The intermembrane space (IMS) is the region between the mitochondrial inner and outer membranes. The pH of the intermembrane space is significantly lower than that of the matrix due to the higher concentration of protons in the intermembrane space.

The pH gradient of the mitochondria enables the generation of ATP from ADP and Pi by ATP synthase, which pumps protons from the intermembrane space to the matrix, making the pH gradient a source of energy. The proton gradient generated by ATP synthase is used for ATP synthesis. Therefore, the pH in the intermembrane space of mitochondria should be lower compared to the matrix due to the higher concentration of protons in the intermembrane space.

To know more about mitochondria:

https://brainly.com/question/29763308

#SPJ11

The correct bond polarity for those that are incorrect are shown below: δ+Si - Sδ+ for δ+Si—Sδ–δ-O-Pδ+ for δ+O—Pδ–So, the incorrect bond polarities are c, d, and e. Bond polarity can be defined as the separation of electric charge along a bond, resulting in a dipole across that bond. If the bond is between two of the same elements, then the bond will be non-polar.

δ+H—Fδ–The correct bond polarity is shown in the given option, so this option is correct δ+Cl—Iδ–The correct bond polarity is shown in the given option, so this option is correct. δ+Si—Sδ–The correct bond polarity should be δ-Si - Sδ+. The given option shows the opposite polarity, so this option is incorrect. δ+Br—Brδ–The correct bond polarity should be non-polar because the bond is between two of the same element, i.e., Br-Br.

But the given option shows a polarity, so this option is incorrect. δ+O—Pδ–The correct bond polarity should be δ-O-Pδ+. But the given option shows the opposite polarity, so this option is incorrect.The correct bond polarity for those that are incorrect are shown below: δ+Si - Sδ+ for δ+Si—Sδ–δ-O-Pδ+ for δ+O—Pδ–So, the incorrect bond polarities are c, d, and e.

Know more about polarity here:

https://brainly.com/question/15099999

#SPJ11

The unknown amine reacted with the iodomethane and afforded the following tetraalkylammonium salt. The structure of the unknown amine will be C₂H₅-NH₂.

The structure of the unknown amine can be determined by first reacting the amine with iodomethane, which produces a tetraalkylammonium salt. The alkyl groups in the salt indicate the structure of the unknown amine. Therefore, if the tetraalkylammonium salt contains four methyl groups, then the unknown amine would be a primary amine with four methyl substituents (CH₃-NH₂). If the tetraalkylammonium salt contains four ethyl groups, then the unknown amine would be a primary amine with four ethyl substituents (C₂H₅-NH₂).

The reaction of an unknown amine with iodomethane resulted in the formation of a tetraalkylammonium salt. The structure of the unknown amine can be easily determined by breaking down the tetraalkylammonium salt, which is formed in the reaction, and identifying the cation, which is the alkylammonium group. To establish the structure of the unknown amine, one must first break down the tetraalkylammonium salt, which is formed in the reaction, and identify the alkylammonium group, which is the cation.

Learn more about Amine here:

https://brainly.com/question/28167507

#SPJ11

The proper inlet port for the coolant water in a water-cooled West condenser is the bottom port.

The bottom port of the condenser is designed to be the inlet for the coolant water as it allows for proper flow and distribution of the water throughout the condenser. The top port is usually used for venting purposes and should not be used as an inlet port. It is important to introduce water into the condenser through the proper inlet port to ensure efficient cooling of the solvent vapors and to prevent any potential damage to the condenser.

To know more about coolants, here

brainly.com/question/31182856

#SPJ4

An atom is the smallest unit of an element which retains the chemical properties of the particular element. An ion, on the other hand, is a charged particle that forms when an atom gains or loses electrons.

Subatomic particles include protons, neutrons and electrons.

To find out more about atoms and ions, visit:

https://brainly.com/question/7042615

#SPJ1

The answer to the question is option b. The reaction will proceed to the right (product side) when the reaction quotient (Q) is smaller than the equilibrium constant (K).

A chemical reaction will not proceed spontaneously in the forward direction if Q is larger than K. The reaction will proceed spontaneously in the forward direction if Q is less than K. The reaction will be at equilibrium if Q is equal to K.

According to Le Chatelier's principle, when Q is less than K, the system will shift to the right in order to reach equilibrium. This signifies that the reaction will continue to generate products until equilibrium is achieved.

The reaction quotient (Q) is a measure of the relative amounts of products and reactants in a chemical reaction that is not in equilibrium. The reaction quotient is determined in the same manner as the equilibrium constant (K) using molar concentrations or partial pressures of reactants and products. The only difference is that the reaction quotient is calculated at any point in the reaction, not just at equilibrium.

Therefore, if the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction, the reaction will proceed to the product side with a tendency to achieve equilibrium.

To know more about the equilibrium constant, refer here:

https://brainly.com/question/10038290#

#SPJ11

The empirical formula of the molecule is CH2.

To determine the empirical formula, we need to find the simplest whole-number ratio of the atoms in the molecule. We can assume 100 grams of the molecule since percentages are given by mass.

To find the ratio, we need to divide the masses of each element by their respective atomic masses and then divide the result by the smallest value obtained:

The smallest value is 7.14 mol, so we divide both values by 7.14:

To learn more about empirical formula, here

https://brainly.com/question/14044066

#SPJ4

The total molar concentration of ions in a 0.90 m Al2(SO4)3 solution is 1.8 M. Option (a).

This can be calculated by first determining the molar mass of Al2(SO4)3, which is 342.14 g/mol.

Then, divide the given concentration of 0.90 m by the molar mass of Al2(SO4)3, resulting in 0.0026 moles of Al2(SO4)3 per liter of solution.

The total molar concentration of ions, multiply 0.0026 moles by the ionization factor, which is 6 in the case of Al2(SO4)3.

Therefore, the result is 1.8 M, which is the total molar concentration of ions in a 0.90 m Al2(SO4)3 solution.

to know more about molar concentration refer here:

https://brainly.com/question/29429999#

#SPJ11

The main psychoactive ingredient in Amanita muscaria is muscimol.

Amanita muscaria is a type of mushroom that is known for its hallucinogenic properties. Muscimol is a potent psychoactive compound that acts as an agonist for the neurotransmitter GABA, which is the primary inhibitory neurotransmitter in the central nervous system. When muscimol binds to GABA receptors, it enhances the inhibitory effects of GABA, leading to feelings of relaxation, euphoria, and altered perceptions of reality. In addition to muscimol, Amanita muscaria also contains other psychoactive compounds, including ibotenic acid, which is a precursor to muscimol and can also cause some hallucinogenic effects.

To know more about hallucinogenic effects, here

brainly.com/question/11912861

#SPJ4