consider pluto and one of its moons, charon. the gravitational force that pluto exerts on charon acts as a centripetal force for charon to be able to orbit around pluto. true or false

Therefore, according to an alien aboard the spacecraft, it takes 8.3 minutes for the spacecraft to travel the 8.3-light-minute distance from Earth to the Sun.

According to an observer on Earth, the distance from Earth to the Sun is 8.3 light-minutes. Since the extraterrestrial spacecraft is traveling at 0.70c, we can use the time dilation formula:
Δt' = Δt / √(1 - v^2/c^2)
where Δt is the time it takes to travel the distance as measured by the observer on Earth, v is the velocity of the spacecraft relative to the observer on Earth, c is the speed of light, and Δt' is the time it takes to travel the distance as measured by an observer aboard the spacecraft.
Plugging in the values, we get:
Δt' = 8.3 min / √(1 - (0.70c)^2/c^2)
Δt' = 8.3 min / √(1 - 0.49)
Δt' = 11.87 min
Therefore, according to an observer on Earth, it takes 11.87 minutes for the extraterrestrial spacecraft to travel the 8.3-light-minute distance from Earth to the Sun.
Part B:
According to an alien aboard the spacecraft, the distance from Earth to the Sun is still 8.3 light-minutes, but the spacecraft is not moving relative to the alien. Therefore, the time it takes for the spacecraft to travel the distance is simply:

Δt' = Δt / √(1 - v^2/c^2)
where v is now 0, since the spacecraft is not moving relative to the alien.
Plugging in the values, we get:
Δt' = 8.3 min / √(1 - 0)
Δt' = 8.3 min
Part A: To find the time it takes for the extraterrestrial spacecraft to travel the 8.3-light-minute distance from Earth to the Sun according to an observer on Earth, we use the formula:

Time (Earth) = Distance / Speed

The spacecraft's speed is given as 0.70c, where c is the speed of light. So, we have:

Time (Earth) = 8.3 light-minutes / 0.70c

Time (Earth) ≈ 11.86 minutes

Part B: To find the time it takes for the spacecraft to travel the 8.3-light-minute distance according to an alien aboard the ship, we need to take into account time dilation due to special relativity. The time dilation formula is:

Time (Ship) = Time (Earth) * sqrt(1 - v²/c²)

Where v is the spacecraft's speed and c is the speed of light. Plugging in the values, we get:

Time (Ship) = 11.86 minutes * sqrt(1 - (0.70c)²/c²)
Time (Ship) ≈ 11.86 minutes * sqrt(1 - 0.49)
Time (Ship) ≈ 11.86 minutes * sqrt(0.51)
Time (Ship) ≈ 8.3 minutes
So, according to an alien aboard the ship, it takes 8.3 minutes to travel the 8.3-light-minute distance from Earth to the Sun.

To know more about spacecraft visit:-

https://brainly.com/question/3007095

#SPJ11

To find the voltage at point c, we need to use Ohm's Law and Kirchhoff's Voltage Law.  First, we can find the total resistance of the circuit (RT) by adding R1 and R2:

RT = R1 + R2
RT = 6 + R2

Next, we can use Ohm's Law to find the voltage drop across R2:

V2 = IR2
V2 = 5A x R2

Finally, we can use Kirchhoff's Voltage Law to find the voltage at point c:

Vc = VB - V1 - V2

where VB is the voltage of the battery (40V), V1 is the voltage drop across R1 (which we can find using Ohm's Law), and V2 is the voltage drop across R2 that we just found.

V1 = IR1
V1 = 5A x 6Ω
V1 = 30V

Now we can plug in all the values:

Vc = 40V - 30V - 5A x R2

Simplifying:

Vc = 10V - 5A x R2

We still need to find the value of R2 to solve for Vc. To do this, we can use the fact that the current is 5A and the voltage drop across R2 is V2:

V2 = IR2
5A x R2 = V2

Substituting this into the equation for Vc:

Vc = 10V - V2

Vc = 10V - 5A x R2

Vc = 10V - (5A x V2/5A)

Vc = 10V - V2

Vc = 10V - 5A x R2

Vc = 10V - V2

Vc = 10V - 5A x (Vc/5A)

Simplifying:

6V = 5Vc

Vc = 6/5

So the absolute voltage at point c is 6/5 volts.

To find the absolute voltage (V) at point C (upper left-hand corner) in a circuit with an ideal 40 V battery, R1 = 6 ohms, and an unknown R2, with a 5 A counterclockwise current, follow these steps:

1. Calculate the total voltage drop across the resistors: Since the current is 5 A and the battery is 40 V, the total voltage drop across the resistors is 40 V (because the battery provides all the voltage).

2. Calculate the voltage drop across R1: Use Ohm's law, V = I x R. The current (I) is 5 A, and R1 is 6 ohms, so the voltage drop across R1 is 5 A x 6 ohms = 30 V.

3. Determine the absolute voltage at point C: Since one corner is grounded (V = 0), the absolute voltage at point C is the voltage drop across R1. Therefore, the absolute voltage at point C is 30 V.

To know more about voltage visit:

https://brainly.com/question/29445057

#SPJ11

a. 31.2 J is the initial kinetic energy of the block, b. The work done by the 78.0 N force is 553 J, c. the work done by gravity is -331 J, d. The work done by the normal force is zero, e. the final kinetic energy of the block is 253.2 J.

To calculate the final kinetic energy of the block, we need to use the principle of conservation of energy. This principle states that the total energy of a system remains constant as long as no external forces act on it. In this case, the block is initially at rest and is pushed up the inclined plane by a horizontal force. The force of gravity acts on the block in the opposite direction, causing it to slow down. As the block reaches the top of the inclined plane, it has gained potential energy due to its increased height.
Using the work-energy principle, we can calculate the change in kinetic energy of the block. The work done by the 78.0 N force is 553 J, while the work done by gravity is -331 J. The work done by the normal force is zero since the block is not moving perpendicular to the surface of the inclined plane.
Therefore, the net work done on the block is:
Net work = Work by force + Work by gravity
Net work = 553 J - 331 J
Net work = 222 J
This net work done is equal to the change in kinetic energy of the block, since no other forms of energy are involved. We already know the initial kinetic energy of the block, which is 31.2 J. So, we can find the final kinetic energy of the block as:
Final kinetic energy = Initial kinetic energy + Net work done
Final kinetic energy = 31.2 J + 222 J
Final kinetic energy = 253.2 J
Therefore, the final kinetic energy of the block is 253.2 J.

To know more about kinetic energy visit:

brainly.com/question/26472013

#SPJ11

Oxygen is provided in the atmosphere of the spacecraft, while carbon dioxide is removed from the atmosphere through a system that uses scrubbers or filters to clean the air.

In the atmosphere of a spacecraft, the gas provided is typically a mixture of oxygen and nitrogen, which is similar to the composition of Earth's atmosphere. The exact composition and pressure of the atmosphere will vary depending on the specific spacecraft and the needs of the crew. The provided atmosphere is necessary for the crew to breathe and to maintain a comfortable environment. On the other hand, carbon dioxide is the gas that needs to be removed from the spacecraft's atmosphere. As humans breathe in oxygen, they exhale carbon dioxide, which can build up and become toxic if not removed. To maintain safe levels of carbon dioxide in the spacecraft, a system for removing it is necessary. This is typically done through a process called chemical scrubbing, which uses a chemical reaction to remove carbon dioxide from the air.

Learn more about spacecraft here:

https://brainly.com/question/13478702

#SPJ11

To calculate the work done by the tugboat to move the barge from rest to a velocity of 0.550 m/s, we can use the work-energy principle, which states that the work done is equal to the change in kinetic energy of the system. Since the mass of the tugboat is insignificant, we only consider the mass of the barge, which is 879,000 kg.

First, we find the initial kinetic energy (KE_initial) of the barge, which is 0, as it's initially at rest. Next, we find the final kinetic energy (KE_final) using the formula KE = 0.5 * m * v^2, where m is the mass and v is the velocity:

KE_final = 0.5 * 879,000 kg * (0.550 m/s)^2 ≈ 134,003.875 J (joules)

Now, we can determine the work done (W) using the work-energy principle, where W = KE_final - KE_initial:

W = 134,003.875 J - 0 J = 134,003.875 J

Thus, the tugboat needs to do 134,003.875 joules of work to move the barge from rest to a velocity of 0.550 m/s.

To know more about kinetic energy click this link-

https://brainly.com/question/999862

#SPJ11

The δG°rxn for the given reaction is approximately 34.55 kJ. Where δh°rxn is the standard enthalpy change of the reaction, δs°rxn is the standard entropy change of the reaction, and T is the temperature in Kelvin.

To determine δg°rxn, we can use the equation:
δg°rxn = δh°rxn - Tδs°rxn
From the given information, we have δh°rxn = 1.9 kJ and δs°rxn = -109.6 J/K. To convert the units of δs°rxn to kJ/K, we divide by 1000: δs°rxn = -109.6 J/K / 1000 J/kJ = -0.1096 kJ/K
δg°rxn = δh°rxn - Tδs°rxn
δg°rxn = 1.9 kJ - (298 K)(-0.1096 kJ/K)
δg°rxn = 1.9 kJ + 32.7 kJ = 34.6 kJ
δG°rxn = δH°rxn - TδS°rxn
Given that δH°rxn = 1.9 kJ and δS°rxn = -109.6 J/K, first convert δH°rxn to J:
1.9 kJ * 1000 J/kJ = 1900 J
δG°rxn = 1900 J - (298 K * -109.6 J/K)
δG°rxn = 1900 J + 32648.8 J
δG°rxn ≈ 34548.8 J or 34.55 kJ

To know more about reaction visit :-

https://brainly.com/question/13316655

#SPJ11

To estimate the total mass of the atmosphere, we can use the barometric formula, which relates atmospheric pressure to altitude.

The total mass of the Earth's atmosphere can be estimated using the known value of atmospheric pressure at sea level. The atmospheric pressure at sea level is approximately 101,325 pascals or 1 atmosphere. This pressure is due to the mass of air molecules above the Earth's surface, which exert a force on the surface.
The formula states that the pressure decreases exponentially with altitude, and the rate of decrease depends on the temperature and composition of the atmosphere.
Using this formula, we can estimate the average density of the Earth's atmosphere, which is about 1.2 kg/m3 at sea level. Assuming a total surface area of 510.1 million square kilometers, we can calculate the total mass of the atmosphere to be approximately 5.2 x 1018 kg.
It's worth noting that this estimate is subject to uncertainties due to variations in temperature, composition, and atmospheric dynamics. Nonetheless, it provides a rough approximation of the mass of the Earth's atmosphere, which is a critical component of the Earth's climate and weather systems.

To know more about pressure visit:

brainly.com/question/12971272

#SPJ11

Both dams have to hold back 70ft of water, but the lake behind the Mofo Dam is only 100ft wide, while the lake behind the Fus-Ro-Dah Dam is 2 miles wide. As a result, to determine which dam had to be constructed to be strongest, we must first determine the volume of water that each dam must retain.

The volume of water retained by a dam is calculated using the formula V = A × d, where V is the volume of water in cubic feet, A is the area of the lake in square feet, and d is the depth of the lake in feet. Let's calculate the volume of water retained by each dam: Volume of water retained by Mofo Dam: V = A × d= 100ft × 70ft= 7000 cubic feet Volume of water retained by Fus-Ro-Dah Dam: V = A × d= 2 miles × 5280ft/mile × 70ft= 7392000 cubic feet Therefore, the Fus-Ro-Dah Dam had to be constructed to be strongest because it has to retain much more water than the Mofo Dam.

Learn more about volume  here:
https://brainly.com/question/17322215

#SPJ11

The element that you would add to the compound to most effectively stabilize it when it is altered by excess electrons would be a metal.

Metals have the ability to donate or share electrons easily due to their low ionization energies and tendency to form positive ions. By adding a metal to the compound, it can accept the excess electrons and stabilize the overall charge. The metal can act as a reducing agent, balancing the electron distribution and helping to neutralize the excess negative charge.

The addition of a metal can also lead to the formation of a coordination complex, where the metal coordinates with the compound through coordination bonds. This coordination can further stabilize the compound by providing a stable environment for the excess electrons.

Learn more about Metals here:

https://brainly.com/question/28650063

#SPJ11

The binding energy per nucleon for 48Ti is 8.0206e-13 J/nucleon.

To calculate the binding energy per nucleon for 48Ti, we need to first determine the total binding energy of the nucleus. This can be done by using the formula:

E = (Zm_p + Nm_n - m)*c^2

where E is the total binding energy, Z is the number of protons, N is the number of neutrons, m_p and m_n are the masses of the proton and neutron, m is the mass of the nucleus, and c is the speed of light.

The mass of 48Ti is 47.9359 amu. Converting this to kilograms, we get: 7.96857e-26 kg

48Ti has 22 protons and 26 neutrons, so the total number of nucleons is:

A = Z + N = 22 + 26 = 48

The masses of the proton and neutron are:

m_p = 1.00728 amu * 1.66054e-27 kg/amu = 1.67262e-27 kg

m_n = 1.00867 amu * 1.66054e-27 kg/amu = 1.67493e-27 kg

Using these values, we can calculate the total binding energy of 48Ti:

The binding energy per nucleon can be found by dividing the total binding energy by the number of nucleons:

B = E/A = 3.84968e-11 J/48 = 8.0206e-13 J/nucleon

This value represents the amount of energy required to completely separate one nucleon from the nucleus, and it is a measure of the stability of the nucleus. A higher binding energy per nucleon indicates a more stable nucleus.

For such more questions on energy

https://brainly.com/question/8101588

#SPJ11

To calculate the binding energy per nucleon of 48Ti, we first need to determine the total binding energy of the nucleus, which can be calculated using Einstein's famous equation E=mc², where E is the energy, m is the mass, and c is the speed of light.

The mass of a single 48Ti nucleus is 47.9359 atomic mass units (amu). To convert this to kilograms, we can use the conversion factor 1 amu = 1.66054 x 10^-27 kg:

mass of 48Ti nucleus = 47.9359 amu × 1.66054 x 10^-27 kg/amu

= 7.963 x 10^-26 kg

The total energy of the 48Ti nucleus can be calculated using the mass-energy equivalence formula:

E = mc² = (7.963 x 10^-26 kg) × (299792458 m/s)²

= 7.172 x 10^-10 joules

The number of nucleons in the 48Ti nucleus is 48, so the binding energy per nucleon can be calculated by dividing the total binding energy by the number of nucleons:

binding energy per nucleon = (7.172 x 10^-10 J) / 48

= 1.494 x 10^-11 J/nucleon

Therefore, the binding energy per nucleon for 48Ti is approximately 1.494 x 10^-11 joules per nucleon.

Learn more about binding energy, here:

brainly.com/question/23020604

#SPJ11

The speed of the wound-rotor induction motor can be controlled by the amount of resistance or external resistance connected to the rotor circuit.

The speed control of a wound-rotor induction motor is achieved by varying the amount of resistance connected in the rotor circuit. By adjusting the external resistance, the rotor current and torque can be regulated, thereby influencing the motor's speed. Adding resistance to the rotor circuit increases the overall impedance, reducing the slip and allowing for higher speed operation. Conversely, reducing the resistance decreases the impedance, resulting in increased slip and lower motor speeds. This method of speed control is known as rotor resistance control and provides a means to adjust the motor's operating speed according to the desired application requirements, such as in industrial processes or variable-speed drives.

Learn more about rotor circuit here:

https://brainly.com/question/32239974

#SPJ11

The correct answer to this question is b. Boreal forests with large nutrient pools and low rates of litter input have the slowest turnover rates of elements.

This is because boreal forests have cold climates, which slows down the decomposition process and results in lower rates of litter input. Additionally, the nutrient pools in boreal forests are large, meaning that the elements are stored for longer periods of time before being recycled back into the ecosystem. This is important for maintaining the overall health and productivity of the forest ecosystem. Nitrates, which are an important element for plant growth, may be low in temperate coniferous forests, but this does not necessarily mean that the turnover rate of elements is slowest in these ecosystems. Overall, understanding the turnover rates of elements is important for predicting the long-term health and sustainability of terrestrial ecosystems.

To know more about elements visit:

brainly.com/question/28214499

#SPJ11

The long answer to your question is that the force constant of the spring is 2,160 N/m.

The force constant of a spring is a measure of how stiff the spring is, and is typically denoted by the letter k. It is defined as the amount of force required to stretch or compress a spring by a certain distance. In this case, we are given that it takes 540 J of work to compress a spring by 5 cm.

To find the force constant of the spring, we can use the equation:

W = (1/2) kx^2

where W is the work done on the spring, k is the force constant, and x is the distance the spring is compressed or stretched.

We know that W = 540 J and x = 0.05 m (since 5 cm is equivalent to 0.05 m). Plugging these values into the equation, we get:

540 J = (1/2) k (0.05 m)^2

Simplifying this equation, we get:

k = (2*540 J) / (0.05 m)^2

k = 2,160 N/m

Therefore, the force constant of the spring is 2,160 N/m.

To know more about  force constant visit:-

https://brainly.com/question/29598403

#SPJ11

The [H+] in a 1.0 M HF solution with a Ka of 7.2 x 10⁻⁴ is 2.7 x 10⁻² M.

The percent dissociation of HF in a solution containing 1.0 M HF and 1.0 M NaF is 100%.

The dissociation of HF in water can be represented by the equation:

HF + H₂O ⇌ H₃O⁺ + F⁻

where HF is the weak acid, H₂O is the solvent, H₃O⁺ is the hydronium ion, and F⁻ is the conjugate base of HF.

The equilibrium constant for this reaction is the acid dissociation constant (Ka) of HF:

Ka = [H₃O⁺][F⁻] / [HF]

Given that the Ka of HF is 7.2 x 10⁻⁴, we can use this equation to calculate the equilibrium concentrations of H₃O⁺ and F⁻ in a 1.0 M HF solution:

Ka = [H₃O⁺][F⁻] / [HF]

7.2 x 10⁻⁴ = (x)(x) / (1.0 - x)

where x is the concentration of H3O+ and F- at equilibrium.

Solving for x using the quadratic formula, we get:

x = [H₃O⁺] = 2.7 x 10⁻² M

Therefore, the [H⁺] in a 1.0 M HF solution with a Ka of 7.2 x 10⁻⁴ is 2.7 x 10⁻² M.

To calculate the percent dissociation of HF in a solution containing 1.0 M HF and 1.0 M NaF, we need to determine the concentration of HF that has dissociated in the presence of its conjugate base F⁻. This can be done by calculating the amount of HF that has been converted to F- in the solution, using the stoichiometry of the reaction:

HF + NaF ⇌ NaHF₂

At equilibrium, the concentration of F⁻ in the solution will be equal to the concentration of NaF, which is 1.0 M. Therefore, the concentration of HF that has been converted to F- is:

[H⁺] = [F⁻] = 1.0 M

Substituting these values into the equation for the percent dissociation of HF, we get:

% dissociation = ([H+] / [HF]) x 100%

% dissociation = (1.0 / 1.0) x 100%

% dissociation = 100%

Therefore, the percent dissociation of HF in a solution containing 1.0 M HF and 1.0 M NaF is 100%. This is because the presence of a high concentration of F⁻ in the solution shifts the equilibrium towards the side of the reaction that produces HF, increasing its dissociation.

To know more about percent dissociation, refer to the link below:

https://brainly.com/question/31382672#

#SPJ11

In a double-slit experiment, when monochromatic light passes through two slits and interferes, it creates a pattern of bright and dark fringes on a screen placed behind the slits.

The central maximum is the brightest spot on the screen and is formed by the interference of light waves from both slits in phase.

The first minimum is the point on the screen where the waves from both slits destructively interfere, resulting in a dark fringe.The distance between the central maximum and the first minimum is given by the formula: d sinθ = λ/2

Where d is the distance between the slits, λ is the wavelength of the light, θ is the angle between the line perpendicular to the screen and the line connecting the central maximum to the first minimum. Similarly, the distance between the central maximum and the second maximum on one side of the central maximum can be calculated using the same formula by substituting the angle θ with the angle between the central maximum and the second maximum.

Therefore, the distances traveled by the light waves from the two slits that reach the second maximum on one side of the central maximum will differ by:

Δd = d sin(θ_second) - d sin(θ_first). where θ_second is the angle between the line perpendicular to the screen and the line connecting the central maximum to the second maximum on one side, and θ_first is the angle between the line perpendicular to the screen and the line connecting the central maximum to the first minimum.

Learn more about monochromatic light here:

https://brainly.com/question/30887682

#SPJ11

The wave number of the given wave is 1.50 × 10^6 m^-1, and its wave speed is 63.0 m/s. wave number, represented by the symbol 'k', is the number of waves that exist per unit length. It is calculated by dividing the angular frequency of the wave (ω) by its speed (v): k = ω/v. I

n this case, the angular frequency is given as 30.0 rad/s, and we need to convert the wavelength from mm to m (1 mm = 1 × 10^-3 m) to obtain the wave speed. Thus, v = fλ = ω/kλ, where f is the frequency of the wave. Solving for k gives k = ω/λ = 1.50 × 10^6 m^-1.

Wave speed is the product of frequency and wavelength. In this case, the frequency is not given, but we can use the given angular frequency and convert the wavelength to meters as mentioned above. Thus, the wave speed is v = ω/kλ = (30.0 rad/s)/(1.50 × 10^6 m^-1 × 2.10 × 10^-3 m) = 63.0 m/s.

Learn more about wavelength here:

https://brainly.com/question/13533093

#SPJ11

86.4 kPa  is the pressure of the gas in the cylinder, in kPa.

To determine the pressure of the gas in the cylinder, we will first need to find the pressure difference due to the Mercury column. Since Mercury has a density of 13,600 kg/m³, we can use the formula:
P = ρgh
where P is the pressure, ρ is the density (13,600 kg/m³), g is the acceleration due to gravity (10.0 m/s²), and h is the height difference in meters.
The height difference is given as 16 cm - 6 cm = 10 cm, which we need to convert to meters (0.1 m). Plugging the values into the formula:
P = 13,600 kg/m³ × 10.0 m/s² × 0.1 m = 13,600 Pa
Now, we have the pressure difference due to the Mercury column. To find the gas pressure, we subtract this value from atmospheric pressure (100 kPa):
P_gas = 100,000 Pa - 13,600 Pa = 86,400 Pa
To express the answer in kPa and with 3 significant figures:
P_gas = 86.4 kPa

To know more about Mercury visit:

https://brainly.com/question/4025230

#SPJ11

The boy's average power output was approximately 99.19 watts.

To calculate the average power output of the boy, you'll need to use the formula for power: Power (P) = Work (W) / Time (t).

First, we need to determine the work done (W), which can be calculated using the formula: W = Force (F) × Distance (d). The force in this case is the boy's weight, which is the product of his mass (35 kg) and gravitational acceleration (g ≈ 9.81 m/s²).

Force (F) = Mass (m) × Gravity (g) = 35 kg × 9.81 m/s² ≈ 343.35 N

Now, calculate the work done (W):

W = Force (F) × Distance (d) = 343.35 N × 13 m ≈ 4463.55 J (joules)

Next, we'll use the power formula:

Power (P) = Work (W) / Time (t) = 4463.55 J / 45 s ≈ 99.19 W (watts)

So, the boy's average power output was approximately 99.19 watts.

To learn more about gravity, refer below:

https://brainly.com/question/31321801

#SPJ11

When viewed straight down (90° to the surface), an incident light ray moving from water to air does not undergo refraction as it passes through the interface.

When viewed straight down (90° to the surface), the incident light ray moving from water to air does not undergo refraction as it passes through the interface. Refraction occurs when light passes from one medium to another at an angle. At 90°, the light ray travels perpendicular to the surface, resulting in a normal incidence. In this case, the light ray does not change its direction as it transitions from water to air. The refractive index governs the bending of light at the interface, but at 90°, the change in direction is negligible. Therefore, the incident light ray appears to continue in a straight line without deviation when observed directly from above.

Learn more about  incident light ray here:

https://brainly.com/question/29071577

#SPJ11

It took the cooling fan 4.7 seconds to complete 75.0 revolutions after it was turned off.

When the cooling fan is turned off at 950 rev/min, we first need to convert this value to rev/s by dividing by 60: 950/60 = 15.83 rev/s. Assuming constant angular deceleration, the fan comes to rest in 12.0 seconds.

To find the deceleration rate, we can use the formula: deceleration = (final speed - initial speed) / time.

In this case, it would be (0 - 15.83) / 12 = -1.32 rev/s².

Now, to find the time it takes to complete 75.0 revolutions, we can use the formula: final speed = initial speed + deceleration * time.

Solving for time, we get: time = (final speed - initial speed) / deceleration = (0 - 15.83) / -1.32 ≈ 4.7 seconds.

For more such questions on cooling , click on:

https://brainly.com/question/13748261

#SPJ11

The time taken for the fan to complete 75 revolutions is determined as 4..74 seconds.

The time taken for the fan to complete 75 revolutions is calculated as follows;

Speed = Distance / time

time = Distance / speed

The given parameters include;

The time taken for the fan to complete 75 revolutions is calculated as;

time = angular distance / angular speed

time = ( 75 rev ) / ( 950 rev / min)

time = 0.07895 min

time = 4.74 seconds

Learn more about time of motion here: https://brainly.com/question/24739297

#SPJ4

The electric field 12.4 m away from the positive charge of 3.34x10^-5 c is 1.65x10^-7 N/C. we find that the electric field strength is approximately 6.77 N/C.

The strength of the electric field can be calculated using Coulomb's law formula, which states that the electric field (E) equals the force (F) exerted on a test charge (q) divided by the test charge (q) itself and the distance (r) squared. Mathematically, E = F/q = k(q1q2)/r^2q, where k is the Coulomb's constant. In this case, the test charge can be assumed to be a unit charge (1 c). Therefore, the electric field strength can be calculated as E = k(q1q2)/r^2, where q1 is the charge of the object (3.34x10^-5 c), q2 is the test charge (1 c), r is the distance from the charge (12.4 m), and k is the Coulomb's constant (9x10^9 N m^2/C^2).

In this formula, k is the electrostatic constant, which is approximately 8.99x10^9 Nm²/C². Given the charge (Q) of 3.34x10^-5 C and the distance (r) of 12.4 m, we can plug these values into the formula and calculate the electric field strength. E = (8.99x10^9 Nm²/C²) * (3.34x10^-5 C) / (12.4 m)^2
To know more about  positive charge visit:

https://brainly.com/question/2903220

#SPJ11

Answer:

A diffraction grating with 470 lines per millimeter produces a visible spectrum angular width of 8.37 ∘  the order of the spectrum is 1.

Explanation:

We can use the formula for the angular width of a diffraction grating spectrum:

θ = λ / d * (n - 1)

where θ is the angular width of the spectrum, λ is the wavelength of light, d is the spacing between the grating lines, and n is the order of the spectrum.

Solving for n, we get:

n = θ / (λ / d) + 1

We are given θ = 8.37 degrees and d = 1 / 470 mm. For visible light, we can use an average wavelength of 550 nm.

n = 8.37 * π / 180 / (550 * 10^-9 / (1 / 470 * 10^-3)) + 1

n ≈ 1.0

Therefore, the order of the spectrum is 1.

To learn more about diffraction grating refer here:

https://brainly.com/question/10709914#

#SPJ11

Among PLA, PGA, PCL, and P3HB have the lowest resorption rate.

This is because PCL is a hydrophobic polymer, which makes it more resistant to degradation by water and enzymes in the body compared to the other polymers. Additionally, PCL has a slower rate of hydrolysis, which means it takes longer for it to break down and be absorbed by the body. As a result, PCL is often used in medical applications that require a longer-term implant, such as sutures, bone screws, and drug delivery systems.

Polyester is hydrophobic, Explanation: Acrylics, epoxies, polyethylene, polystyrene, polyvinyl chloride, polytetrafluorethylene, polydimethylsiloxane, polyesters, and polyurethanes are examples of hydrophobic (water-resistant) polymers

Among PLA, PGA, PCL, and P3HB have the lowest resorption rate.

To learn more about  polymer visit: https://brainly.com/question/18783528

#SPJ11

The maximum amount of static friction that can act on the book is equal to the product of the coefficient of friction and the normal force.

The friction force acting on an object at rest is known as static friction. The maximum amount of static friction that can act on the book is equal to the product of the coefficient of friction and the normal force. The coefficient of friction is given as 0.50, and the normal force is the force that the table exerts on the book, perpendicular to the surface. It is equal to the weight of the book, which is the force of gravity acting on it.

Therefore, the maximum amount of static friction that can act on the book is equal to 0.50 times the weight of the book. This calculation can help us determine if the book will remain at rest or start moving if a force is applied to it. If the force applied is less than the maximum static friction, the book will remain at rest.

Learn more about static friction here:

https://brainly.com/question/17140804

#SPJ11

The direction of the force vector is 150.9° counterclockwise from the positive x-axis.

To find the direction of the force vector, we need to use trigonometry. We can use the inverse tangent function to find the angle between the force vector and the positive x-axis :- θ = tan⁻¹(Fy/Fx)

where θ is the angle in radians. Plugging in the given values, we get:

θ = tan⁻¹(4.15 N / (-7.50 N))

θ ≈ -29.1°

Since the angle is negative, we know that the force vector is in the fourth quadrant, which is 180° - 29.1° = 150.9° counterclockwise from the positive x-axis.

To know more about force refer here :-

https://brainly.com/question/13191643#

#SPJ11

10 Coulombs of charge would pass through the cross section of the conductor in the time interval from t = 0 s to t = 5 s.

To calculate the amount of charge that passes through a cross section of a conductor in a given time interval, we need to use the formula Q = I x t, where Q is the charge, I is the current, and t is the time interval.

Without knowing the specific values of I and t, it is impossible to calculate the exact amount of charge that passes through the conductor. However, we can determine the charge if we have information about the current.

If we know the current, we can use the formula Q = I x t to calculate the charge. For example, if the current is 2 amperes (A) and the time interval is 5 seconds (s), then the amount of charge that passes through the cross section of the conductor would be:

Q = I x t
Q = 2 A x 5 s
Q = 10 Coulombs (C)

Therefore, in this example, 10 Coulombs of charge would pass through the cross section of the conductor in the time interval from t = 0 s to t = 5 s.

To learn more about current, refer below:

https://brainly.com/question/13076734

#SPJ11

The shortest period of oscillation occurs for the largest value of a, which is 0.5 m (option E).

The period of oscillation for a physical pendulum is given by:
T = 2π√(I/mgd)
Where I is the moment of inertia of the meter stick about its pivot point, m is its mass, g is the acceleration due to gravity, and d is the distance between the pivot point and the center of mass.

Since we want to find the value of a that results in the shortest period of oscillation, we need to find the value of d that minimizes T. We know that the distance between the pivot point and the center of mass of the meter stick is: d = (1/2)(100 cm) = 50 cm = 0.5 m

So we can plug this into the formula for T:
T = 2π√(I/mgd)
T = 2π√((1/3)ml²/mg(0.5))
T = 2π√((2/3)l/g)
where l is the length of the meter stick.

Now we can see that the value of a does not affect the period of oscillation, since it does not appear in the formula for T.

To determine which value of a results in the shortest period of oscillation for a physical pendulum with a meter stick pivoted at a point a distance a from its center, we can use the formula for the period of a physical pendulum:
T = 2π√(I / (m * g * a))

Here, T is the period, I is the moment of inertia, m is the mass, g is the acceleration due to gravity, and a is the distance from the pivot point. Since I, m, and g are constants for a given meter stick, we can focus on the a value to minimize the period.

The period of oscillation is inversely proportional to the square root of a. Therefore, as a increases, the period decreases.

Given the options:
A. 0.1 m
B. 0.2 m
C. 0.3 m
D. 0.4 m
E. 0.5 m

The shortest period of oscillation occurs for the largest value of a, which is 0.5 m (option E).

Learn more about oscillation

https://brainly.com/question/29451479

#SPJ11

When light passes through narrow slits, the slits act as sources of coherent waves, and light spreads out as semicircular waves, Pure constructive interference occurs where the waves are crest to crest or trough to trough.

Pure destructive interference occurs where they are crest to trough. The light must fall on a screen and be scattered into our eyes for us to see the pattern. An analogous pattern for water wavesNote that regions of constructive and destructive interference move out from the slits at well-defined angles to the original beam. These angles depend on wavelength and the distance between the slits, Each slit is a different distance from a given point on the screen. Thus, different numbers of wavelengths fit into each path. Waves start out from the slits in phase (crest to crest), but they may end up out of phase (crest to trough) at the screen if the paths differ in length by half a wavelength, interfering destructively. If the paths differ by a whole wavelength, then the waves arrive in phase (crest to crest) at the screen, interfering constructively.

Learn more about interfering here:

https://brainly.com/question/16846441

#SPJ11

See diagram for distances needed: d1 = distance from laser entry point to top surface of block; d2 = thickness of block; d3 = distance from bottom surface of block to laser exit point.

Plot sin(θi) vs sin(θr) where θi is the angle of incidence and θr is the angle of refraction inside the plastic block. Label the y-axis as sin(θr) and the x-axis as sin(θi). ii. The index of refraction is equal to the slope of the best-fit line.  λ1/λ2 = n2/n1, where λ1 and λ2 are the wavelengths of light in plastic 1 and plastic 2, respectively. This expression follows from the assumption that the frequency of the light remains constant as it crosses the boundary between the two materials, which implies that the product of wavelength and frequency is constant. The ratio of wavelengths is therefore equal to the ratio of the indices of refraction, according to Snell's law.

Learn more about rectangle here:

https://brainly.com/question/29123947

#SPJ11

An LC circuit is a circuit that consists of an inductor (L) and a capacitor (C) connected in parallel or in series. In an LC circuit, the energy is transferred back and forth between the inductor  inductance of the LC circuit is approximately 2.64 × [tex]10^{-4} H.[/tex]

The frequency of oscillation is given by: f = 1 / (2π√(LC)) where f is the frequency in hertz (Hz), L is the inductance in henrys (H), and C is the capacitance in farads (F).

We are given the frequency f = 120 Hz and the capacitance C = 8.00 F. We can rearrange the above formula to solve for the inductance L:

[tex]L = (1 / (4π^2f^2C))\\L = (1 / (4π^2(120 Hz)^2(8.00 F)))\\L = 2.64 × 10^-4 H[/tex]

Therefore, the inductance of the LC circuit is approximately 2.64 × 10^-4 H.

Know more about capacitance here:

https://brainly.com/question/31871398

#SPJ11