Consider the reaction below. 2al2o3 → 4al 3o2 what is the mole ratio of oxygen to aluminum? o2:al = :4

Answers

Answer 1

Answer:

3/4

Explanation:

2Al2O3 → 4Al + 3O2

Molar ratio of oxygen to aluminum is 3/4.

Answer 2

Answer: 3:4

Explanation: Got it right on Edge


Related Questions

Four students all do the same experiment for the science fair. They test reaction times for pushing a button when a specific color is shown. Their data is as follows: ⎡⎣⎢⎢⎢⎢⎢⎢⎢⎢⎢⎢Student 1Student 2Student 3Student 4Reaction Time (seconds)Trial 10.440.350.410.42Trial 20.410.430.520.43Trial 30.470.380.570.41Trial 40.390.390.460.42Trial 50.460.420.550.41Trial 60.420.440.490.42⎤⎦⎥⎥⎥⎥⎥⎥⎥⎥⎥⎥ Put the students in order from most to least reliable data. A. Student 3, Student 2, Student 1, Student 4 B. Student 2, Student 1, Student 4, Student 3 C. Student 4, Student 1, Student 2, Student 3 D. Student 1, Student 2, Student 3, Student 4

Answers

The order of the students from the most reliable to the least reliable is C. Student 4, Student 1, Student 2, Student 3.

what student has the most reliable data?

the student with the most reliable data is the one that has the least variation in their data in the various trials.

this student is therefore student 4.

the next student would be student 1 and student 2 would be the third most reliable.

student 3 has large variations in their trials which makes their data the least reliable.

find out more on reliable data at https://brainly.com/question/8391667.

#SPJ1

Magnesium and calcium have similar chemical properties because their atoms in the ground state have.

Answers

Magnesium and calcium have similar chemical properties because they have the same number of electrons in their valence shells.

What does magnesium and calcium have in common?

The valence/outermost shell of magnesium and calcium both has two electrons. An element's chemical characteristics are dictated by how its electrons are arranged in their orbits around the nucleus. The same number of protons and electrons means that an element's chemical behavior is fundamentally determined by its atomic number, which explains why Mg and Ca share the same chemical properties.

On the periodic table, magnesium and calcium are both located in the second vertical column. Magnesium and calcium are alkaline earth metals, just like all Group 2 elements. Both of them are salt-forming soft, silver-colored metals that respond fast to halogen gases like fluorine, chlorine, and bromine.

Learn more about magnesium and calcium here:

https://brainly.com/question/11324493

#SPJ4

To demonstrate the formation of iron (iii) chloride from iron fillings

Answers

Iron (iii) chloride is obtained by vapor condensation from the reaction between chlorine gas and iron fillings.

How can iron (iii) chloride be formed from iron fillings?

Iron (ii) chloride can be formed from iron fillings in the laboratory as follows:

Iron fillings + Cl₂ → FeCl₃

Chlorine gas is introduced into a reaction vessel containing iron fillings and the iron (iii) chloride vapor formed is obtained by condensation.

In conclusion, iron (iii) chloride is formed by the the direct combination of iron fillings and chlorine gas.

Learn more about iron (iii) chloride at: https://brainly.com/question/14653649

#SPJ1

Consider the reaction and its equilibrium constant at 25.0 ∘C :

CO(g)+2H2(g)⇌CH3OH(g) , Kp=6.09×10−3

A reaction mixture contains P(CO)=0.265atm , P(H2)=0.265atm , and P(CH3OH)=0.265atm .

Is the reaction mixture at equilibrium?

Since Qp>Kp , the reaction is not at equilibrium
Since Qp Since Qp=Kp , the reaction is at equilibrium
Since Qp=Kp , the reaction is not at equilibrium

Answers

Since Qp>Kp , the reaction is not at equilibrium.

What is the equilibrium constant?

The equilibrium constant shows the extent to which reactants are converted into products.

Now we have to obtain the Qp as follows;

Qp =[CH3OH]/[CO] [H2]^2

Qp = 0.265/(0.265) (0.265)^2

Qp = 14.2

Now we know that Kp = 6.09×10−3, Since Qp>Kp , the reaction is not at equilibrium.

Learn more about equilibrium constant:https://brainly.com/question/10038290

#SPJ1

What three letters are always added to the end of nonmetals in naming ionic compounds?

Answers

Answer:

-ide

Explanation:

Ionic compounds are made up of two parts: a cation and an anion. The cation is positively charged (less electrons) and the anion is negatively charged (more electrons). When naming these compounds, if the anions are nonmetals, they have their endings dropped in order to add the new ending: -ide.

Examples,

CaCl₂ ----> calcium chloride

BaF₂ -----> barium fluoride

MgO -----> magnesium oxide

Based on the observed performance of the air bag models and the amounts of sodium bicarbonate and acetic acid (vinegar) needed for an automotive air bag of 80 or 160 L, are these reactants a good substitute for sodium azide

Answers

The reactants are not good a good substitute for sodium azide in airbags because sodium bicarbonate and acetic acid produces far less volume of gas than sodium azide.

Which of the reactants produces greater volume of gas?

The chemical equation of the reactions is given below:

Sodium azide reaction: 2 NaN₃ → 2 Na + 3 N₂Sodium bicarbonate and acetic acid reaction: Na₂CO₃ + CH₃COOH → CH₃COONa + H₂O + CO₂

The molar volume of all gases is 22.4 L

Based on the mole ratio, sodium bicarbonate and acetic acid produces far less volume of gas than sodium azide. Thus, the reactants are not good a good substitute for sodium azide.

In conclusion, the molar volume of gases is constant.

Learn more about gas volume at: https://brainly.com/question/10929120

#SPJ1

Which of the following are SI units? Select
all that apply.

Answers

Answer:

Seconds (s)

Liters (L)

Explanation:

SI units relate to the International System of Units. These units are the base, metric units that are most commonly accepted for different measurements.

Common SI Units

The most common SI units are as follows:

Length - meter (m)Time - second (s)Mass - kilogram (kg)Amount of substance - mole (mole)Electric current - ampere (A)Temperature - kelvin (K)Volume - liter (L)

*Note that gram (g) is not an SI unit

Each type of measurement will only have 1 SI unit. This is the unit that will be expected for most answers. Sometimes this means converting an answer into a different unit so it is more widely accepted.

Why SI Units are Important

SI units are important for the same reason that the metric system is used. It gives a standardized list of measurements that scientists across the world can use. Also, it makes it easier to compare scientific findings and studies when all of the measurements are given in the same units.

There are times when it is unrealistic to use SI units. For example, when discussing space, using meters will not be realistic due to the size of space. Also, when measuring the mass of small elements, kilograms are too large. But otherwise, SI units should be used.

see the attached photo*** can someone please explain how to do this for me? I really need help on my summer school thank you !

Answers

Answer:

See attached image.

Explanation:

See attached image.

Remember to use the units in deciding steps to take.  Find the moles needed or delivered by using:

Molarity x Volume = moles  [(moles/L)*(L) = moles]

Molarity, M, is dedined as 1 mole/liter.  When working with a unit such as 6M, rewite it as 6 moles/liter, and then use unit conversions to guide how to find the solution, so to speak.

How will designing more efficient stoves help conserve fuel?

Answers

Answer:

it would do wonders for the health of those using them and, by extracting energy from the fuel more efficiently, would be more environmentally sustainable too.

predict the theoretical mass of baco3 that should form

Answers

A precipitation reaction occurs when 50. 0 mL of 0. 50 M BaCl₂ is mixed with 75. 0 mL of 0. 75 M Na₂CO₃ (aq). The only precipitate is the BaCO₃ (s) formed. (a) The balanced chemical equation is BaCl₂ + Na₂CO₃ → BaCO₃ + 2NaCl. (b) The limiting reagent is Na₂CO₃.

What is Balanced Chemical Equation ?

The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.

Now we have to write the balanced equation

BaCl₂ + Na₂CO₃ → BaCO₃ + 2NaCl

How to find the number of moles ?

To calculate number of moles when molarity and volume are given as:

Number of moles = Molarity × Volume

Now,

Number of moles of BaCl₂ = Molarity  × Volume

                                             = 0.50 M  × 0.05 L         [1 ml = 0.001 L]

                                             = 0.025 moles

Number of moles of Na₂CO₃ = Molarity  × Volume

                                                = 0.75 M × 0.075 L     [1 ml = 0.001 L]

                                                = 0.05625 moles

The limiting reagent is Na₂CO₃ here.

Thus from the above conclusion we can say that A precipitation reaction occurs when 50. 0 mL of 0. 50 M BaCl₂ is mixed with 75. 0 mL of 0. 75 M Na₂CO₃ (aq). The only precipitate is the BaCO₃ (s) formed. (a) The balanced chemical equation is BaCl₂ + Na₂CO₃ → BaCO₃ + 2NaCl. (b) The limiting reagent is Na₂CO₃.

Learn more about the Balanced chemical equation here: https://brainly.com/question/26694427

#SPJ1

Disclaimer: The question was given incomplete on the portal. Here is the complete question.

Question: A precipitation reaction occurs when 50. 0 mL of 0. 50 M BaCl₂ is mixed with 75. 0 mL of 0. 75 M Na₂CO₃ (aq). The only precipitate is the BaCO₃ (s) formed.

a) Write the balanced equation that describes this reaction.

b) Which chemical is the limiting reactant

Consider the chemical equation in equilibrium. CH4(g) H2O(g) CO(g) 3H2(g) What will happen to the equilibrium of this reaction if the pressure is increased

Answers

The equilibrium of this reaction will shift to the left to favor the reverse reaction if the pressure is increased.

Balanced chemical equation

CH₄(g) + H₂O(g)  → CO(g) + 3H₂(g)

The principle suggests

The equilibrium will move to the side of the reaction where there are fewer moles of gas as pressure increases.

And the equilibrium will move toward the side of the reaction where there are more gas molecules when the pressure is reduced.

In the given chemical equation

The no. of moles of reactant = 2

The no of moles of the product = 4

Total moles of reactant is less than that of total moles of product

Therefore, If the pressure is increased the equilibrium of this reaction will shift to the left to favor the reverse reaction.

Learn more about Le Ch-atilier's principle here https://brainly.com/question/3384381

#SPJ1

Use the appropriate standard reduction potentials below to determine the equilibrium constant at 211 K for the following reaction under acidic conditions.

Answers

The equilibrium constant K is 17.78 × 10²⁷ at 255 K for the following reaction under acidic conditions.

4H⁺ (aq) + MnO₂ (s) + 2Fe⁺² (aq) → Mn⁺² (aq) + 2Fe⁺³ (aq) + 2H₂O (l)

What is the relation between standard electrode potential and equilibrium constant ?

The relation between standard electrode potential and equilibrium constant is as follows:

G = -2.303 RT log K

-nFE° = -2.303 RT logK

[tex]\log K = \frac{nFE^{\circ}_{\text{cell}}}{2.303RT}[/tex]

Here,

n = 2

F = 96500

[tex]E^{\circ}_{\text{Cell}} = E^{\circ}_{\text{reduced}} - E^{\circ}_{\text{oxidized}}[/tex]

        = 0.77 V - 1.51 V

        = -0.74 V

R = 8.314 J/K mole

T = 255 K

Now put the values in above formula we get

[tex]\log K = \frac{nFE^{\circ}_{\text{cell}}}{2.303RT}[/tex]  

[tex]\log K = \frac{2 \times 96500 \times (-0.74)}{2.303 \times 8.314\ \text{J/K mole} \times 255\ K}[/tex]  

[tex]\log K = \frac{-142820}{4882.521}[/tex]

log K = 29.25

K = 17.78 × 10²⁷

The equilibrium constant K is 17.78 × 10²⁷ at 255 K for the following reaction under acidic conditions.

4H⁺ (aq) + MnO₂ (s) + 2Fe⁺² (aq) → Mn⁺² (aq) + 2Fe⁺³ (aq) + 2H₂O (l)

Learn more about the Gibbs free energy here: https://brainly.com/question/17310317

#SPJ4

Disclaimer: The question was given incomplete on the portal. Here is the complete question.

Question: Use the appropriate standard reduction potentials below to determine the equilibrium constant at 255 K for the following reaction under acidic conditions.

4H⁺ (aq) + MnO₂ (s) + 2Fe⁺² (aq) → Mn⁺² (aq) + 2Fe⁺³ (aq) + 2H₂O (l)

The equation that relates equilibrium constants with cell potentials is

[tex]\log K = \frac{nFE^{\circ}_{\text{cell}}}{2.303RT}[/tex]

Use this formula, along with the information in the appendix of your book to solve for K.  

In the lab, you looked at speed-time graphs to determine the acceleration of the cart for each of the three fan speeds. what was the acceleration of the cart with low fan speed? cm/s2 what was the acceleration of the cart with medium fan speed? cm/s2 what was the acceleration of the cart with high fan speed? cm/s2

Answers

Answer:

See below.

Explanation:

Acceleration is the change in velocity over a period of time.  

Let vi be the initial velocity.

Let vf be the final velocity.

t is the time it took to go from vi to vf.

Acceleration is (vf-vi)/t

If the initial velocity was 2 cm/s and the final velocity was 10 cm/s, the object would have incresed it's velocity by (10 - 2) or 8 cm/s.  If iit took 10 seconds to reach vf, the acceleration would be:

(8 cm/s)/(10 s) = 0.8 cm/s^2

What is a foram and what is curious about the foram fossils of gubbio’s limestone?

Answers

Their fossilized shells formed these limestone rocks, which, like Gubbio's mountains, were once at the bottom of the ocean. Now exposed, they represent over a million years of a geological time period known as the Cretaceous.

Walter Alvarez found that forming a distinct boundary between the limestone of the two periods was a thin layer of red clay. Immediately below this clay boundary, the Cretaceous limestone was heavily populated with a wide mix of the fossils of tiny marine creatures called foraminifera, or “foram” for short.

On the Atlantic Coast, outside the town of Zumaia, Dutch geologist Jan Smit was studying the forams from a different ancient sea. Their fossilized shells formed these limestone rocks, which, like Gubbio's mountains, were once at the bottom of the ocean.

Learn more about limestone here: https://brainly.com/question/13723417

#SPJ4

According to the modern periodic law the properties of elements are periodic function of their

Answers

Atomic number

Explanation:
This is because atomic number determines the amount of protons and neutrons that are found within the element which plays a factor of the elements functionality

Help!!

I₂(s) + 5F₂(g) → 2IF₅(g)
A 10.00 L flask is charged with 16.0 grams of I₂ and 2.00 atm of F₂ at 25°C. The flask is heated to 100°C until one of the reagents is completely consumed. What will be the total pressure (in atm) of the final products in the flask at 100°C? (Assume ideal gas behavior).

Answers

The total atmospheric pressure of the final product in the flask is 18.36atm

What is atmospheric pressure?

Atmospheric pressure can be defined as the force exerted on a surface by the air above it as gravity pulls it to earth.

Furthermore, the standard atmosphere is a unit of pressure which is also defined as:

101,325 Pa =760mmHg

So therefore, the total pressure of the final product in the flask is 18.36atm

Complete question:

Gaseous iodine pentafluoride, IF₅, can be prepared by the reaction of solid iodine and gaseous fluorine:

I₂(s) + 5F₂(g) → 2IF₅(g)

A 10.00 L flask is charged with 19.0 grams of I₂ and 2.00 atm of F₂ at 25°C. The flask is heated to 100°C until one of the reagents is completely consumed. What will be the total pressure (in atm) of the final products in the flask at 100°C? (Assume ideal gas behavior)

Learn more about gas/atmospheric pressure:

https://brainly.com/question/14498424

#SPJ1

What is a molecular dipole moment?

Answers

A measure of the polarity of the molecule(s)

What is acceptable as eye protection when working with one gallon of hydrochloric acid?

Answers

The Protective Equipment is a Face Shield.

Hydrochloric acid is a dangerous chemical, it can be handled with proper care. As we know Hydrochloric acid is corrosive. If acid touches the skin, eyes, and internal organs then the damage can not be treated, or even in some cases it is fatal.

If hydrochloric acid is used in the workplace, then there is a need for access to an eye-flush station.

If acid is used at home, then need to follow some safety instructions. If acid is diluted with water, still there is a need for protection. For example: wear protective clothes and gloves.

Learn more about hydrochloric acid: https://brainly.com/question/18861540

#SPJ4

which bases are called alkaline​

Answers

Answer:

Any base with an ability to dissolve in water are called alkalis. All alkalis are bases, however, not all bases are alkalis.

The book value of a machine, as shown on the balance sheet, is not relevant in a decision concerning the replacement of that machine by another machine. (Ignore taxes.) Group starts

Answers

The book value of a machine, as shown on the balance sheet, is not relevant in a decision concerning the replacement of that machine by another machine: TRUE

What is the book value?Book value is the worth of an asset based on its balance sheet account balance in accounting. The value of an asset is determined by subtracting the asset's original cost from any depreciation, amortization, or impairment expenses. Traditionally, a company's book value is equal to its total assets minus intangible assets and liabilities. In practice, however, depending on the source of the computation, book value may include either goodwill or intangible assets, or both. The value inherent in its employees, which is part of a company's intellectual capital, is always overlooked. When intangible assets and goodwill are specifically omitted, the indicator is frequently defined as "tangible book value."

Therefore, the statement "the book value of a machine, as shown on the balance sheet, is not relevant in a decision concerning the replacement of that machine by another machine" is TRUE.

Know more about Book Value here:

https://brainly.com/question/23057744

#SPJ4

Complete question:

The book value of a machine, as shown on the balance sheet, is not relevant in a decision concerning the replacement of that machine by another machine. (Ignore taxes.) TRUE or FALSE

A proton exits the cyclotron 1. 0 ms after starting its spiral trajectory in the center of the cyclotron. How many orbits does the proton complete during this 1. 0 ms ?.

Answers

Orbits do the proton complete:

A proton exits the cyclotron 1. 0 ms after starting its spiral trajectory in the center of the cyclotron and 1.8 x [tex]10^{4}[/tex] orbits does the proton complete during this 1. 0 ms

Calculation:

(a) The kinetic energy of the proton is given by, K.E. = [tex]\frac{1}{2} m v^{2}[/tex]

v = [tex]\sqrt{\frac{2(K E)}{m}}[/tex]

v = [tex]\sqrt{\frac{2(6.5 \mathrm{MeV})\left(1.6 \times 10^{-19} \mathrm{~J} / \mathrm{eV}\right)}{1.672 \times 10^{-27} \mathrm{~kg}}}[/tex]= 3.5 [tex]\times 10^{7} \mathrm{~m} / \mathrm{s}[/tex]

The radius of the orbit is given by,

r = [tex]\frac{m v}{B q}=\frac{1.672 \times 10^{-27} \mathrm{~kg}\left(3.5 \times 10^{7} \mathrm{~m} / \mathrm{s}\right)}{(1.2 \mathrm{~T})\left(1.6 \times 10^{-19} \mathrm{C}\right)}[/tex] = 0.30 m

Hence, the diameter of the largest orbit just before the proton leaves the orbit is 0.60 m.

(b) The time required to complete one revolution is given by, T=[tex]\frac{2 \pi m}{B q}=\frac{2 \pi\left(1.672 \times 10^{-27} \mathrm{~kg}\right)}{(1.2 \mathrm{~T})\left(1.6 \times 10^{-19} \mathrm{C}\right)}[/tex] =5.48 x [tex]10^{-8}[/tex] s

The number of revolutions made by the proton is given by,

Tn = t

Therefore, n = t/T = [tex]\frac{1 \mathrm{~ms}}{5.48 \times 10^{-8} \mathrm{~s}}[/tex] = 1.8 x [tex]10^{4}[/tex]

Note: your question is incomplete, but most probably your full question was, A medical cyclotron used in the production of medical isotopes

accelerates protons to 6.5 MeV. The magnetic field in the

cyclotron is 1.2 T.

a. What is the diameter of the largest orbit, just before the protons

exit the cyclotron?

b. A proton exits the cyclotron 1.0 ms after starting its spiral

trajectory in the center of the cyclotron. How many orbits

does the proton complete during this 1.0 ms?

Learn more about cyclotron here,

https://brainly.com/question/14985809

#SPJ4

What is the freezing point of a solution made from 22.0 g of octane (c8h18) dissolved in 148.0 g of benzene? (for benzene, freezing point = 5.50°c; kf = 5.12°c/m)

Answers

The freezing point of a solution is -1.16°C

Calculation,

The equation which give relation between freezing point depletion and molality is,

Δ[tex]T_{f} = K_{f} .m[/tex]      ... (i)

Δ[tex]T_{f}[/tex] is change in the freezing point of the solvent . [tex]K_{f}[/tex] of benzene = 5.12°C/mm is molality of the solution

Moles of the solute = 22.0 g / 114.23 g/mole = 0.193 mole

Mass of the solvent in g = 148 g

Mass of the solvent in kg = 0.148 kg

Molality = 0.193 mole/ 0.148 kg = 1.3 m

Now, after putting the value of  [tex]K_{f}[/tex] and m in equation (i) we get

Δ[tex]T_{f} = K_{f} .m[/tex]  

Δ[tex]T_{f}[/tex]= 5.12°C/m×1.3 m = 6.66°C

Δ[tex]T_{f}[/tex]=  [tex]T_{f}[/tex] (solvent) - [tex]T_{f}[/tex] (solution)

[tex]T_{f}[/tex] (solution) = [tex]T_{f}[/tex] (solvent)  -Δ[tex]T_{f}[/tex]= 5.5 °C - 6.66°C = -1.16°C

The freezing point of a is -1.16°C

To learn about freezing point

https://brainly.com/question/3121416

#SPJ4

please help with question #2

Answers

The Ksp of the solution is 3.2 * 10^-8.

What is Ksp?

The Ksp is called the solubility product . We know it to be the equilibrium constant that shows the extent to which a substance is dissolved in solution.

Now given that;

CaF2(s) ⇔ Ca^2+(aq)  +  2F^-(aq)

Ksp = [ Ca^2+] [F^-]^2

Ksp = [0.002] [0.004]^2

Ksp = 3.2 * 10^-8

Learn more about Ksp:https://brainly.com/question/27132799

#SPJ1

If the concentration of fluoride anion and aluminum cation was increased to 5 m, by how much would the measured ecell change?.

Answers

If the concentration of fluoride anion and aluminum cation was increased to 5M, then there would be decrease in Ecell by 0.055 volts

The standard reduction potential of Fluoride anion and aluminum cation are -

2Al -----> 2Al3+ + 6e-           [tex]E^o[/tex]cell = +1.66

6e- + 3F2 -----> 6F-               [tex]E^o[/tex]cell = +2.87

The complete reaction is -

2Al + 3F2 ------> 2Al3+  +  6F-    [tex]E^o[/tex] = +4.53

Using Nernst Equation :-

E = [tex]E^o[/tex] – 0.0592/n*log[Al3+]^2[F-]^6

n = 6 (n = number of transferred electrons)

E = +4.53 - 0.0592/6*log(5)^2(5)^6

E = +4.53 - 0.00987*log(25)(1.56 x 10^4)

E = +4.53 – 0.00987*log(3.9 x 10^5)

E = + 4.53 -0.00987(5.59)

E = + 4.53 - 0.055

E = +4.47

The change in Ecell = 5 - 4.47 = 0.055V

Learn more about Ecell -

https://brainly.com/question/10203847

#SPJ4

Phosphorus reacts with oxygen gas to produce solid diphosphorus pentoxide. What type of reaction is represented

Answers

It is a combination reaction.

            P + O₂ → P₂O₅

What is a combination reaction?

Combination reactions are those in which two or more reactants combine to create a single product.

A synthesis reaction is another name for a combination reaction. The overall form of the reaction is as follows:

                                        X + Y → XY

There can be a combination reaction between two elements, two compounds, or a compound and an element.

Examples:

H₂ + Cl₂ → 2HCl

P + O₂ → P₂O₅

C + O₂ → CO₂

Learn more about combination reactions here:

https://brainly.com/question/17258460

#SPJ4

What would be the value for the ideal gas constant (R) if pressure (P) is in kilopascals, temperature (T)
is in kelvins, volume (V) is in liters, and amount of gas (n) is in moles?

Answers

Answer:

R = 8.314 pKa*L/mol*K

The value for the ideal gas constant (R) is approximately 8.314 kPa·L/(mol·K).

To determine the value for the ideal gas constant (R) when pressure (P) is in kilopascals (kPa), temperature (T) is in kelvins (K), volume (V) is in liters (L), and amount of gas (n) is in moles, we need to use the appropriate units for R based on these measurements.

The ideal gas constant, R, can be expressed in various units. The most common units for R are:

R = 0.0821 L·atm/(mol·K) (atmospheres, liters, moles, and kelvins)

However, since you provided the measurements in kilopascals, liters, moles, and kelvins, we need to use a different value for R that is consistent with these units:

R = 8.314 kPa·L/(mol·K)

Therefore, when pressure is in kilopascals, volume is in liters, amount of gas is in moles, and temperature is in kelvins, the value for the ideal gas constant (R) is approximately 8.314 kPa·L/(mol·K).

Learn more about ideal gas constant from the link given below.

https://brainly.com/question/31058273

#SPJ2

Which method can be used to detect the end point of an EDTA titration?
a) redox indicator
b) metal ion indicator
c) ion-selective electrode
d) acid-base indicator

Answers

Answer:

b) metal ion indicator

Explanation:

The metal ion indicator is a type of volumetric analysis wherein the colored complex is used to determine the endpoint of the titration. Therefore, it can be used to detect the end-point of an EDTA titration.

name the raw materials for extracting iron

Answers

Answer:

Iron ore, coke and lime stone are some raw materials used for extracting iron.

Hope it helps! :)

Type the correct answer in the box. Use numerals instead of words.

The mechanical advantage shown in the image in ___.

Answers

The mechanical advantages of the machine are 3.

The amount that a force is boosted by employing a machine is known as the mechanical advantage. It is determined by dividing the applied force by the machine's force ( force exerted by the machine).

That is the mechanical advantage of any machine is equal to the ratio between the output force and the input force.

Mechanical advantages M.A. = Input force / Output force

We have,

Input force: 52 N

Output force: 156 N

Therefore,

Mechanical advantage = Input force / Output force.

52/156 = 3

Hence, the mechanical advantages of the machine are 3.

For more study about mechanical advantages refer given link https://brainly.com/question/18345299.

#SPJ1.

Which battery terminal should be connected to the anode and what reaction will occur at the anode?
A) The negative terminal of the battery. Cu2+(aq) + 2e- → Cu(s)
B) The positive terminal of the battery. Cu2+(aq) + 2e- → Cu(s)
C) The negative terminal of the battery. Cu(s) → Cu2+(aq) + 2e-
D) The positive terminal of the battery. Cu(s) → Cu2+(aq) + 2e-
E) The negative terminal of the battery where the brass will be oxidized.
F) The positive terminal of the battery where the brass will be oxidized.

Answers

The positive terminal of the battery should be connected to the anode .and Cu(s) → [tex]Cu^{+2} (aq)[/tex] + [tex]2e^{-}[/tex]  reaction will occur at the anode.

In electrolysis, the two wires or plates dipping into the electrolytic solution is called electrodes.

The battery is galvanic cell which produce electric current. An electrode connected to positive terminal of the battery is called anode. At anode, oxidation ( loss of electrons)  is takes place.

Cu(s) → [tex]Cu^{+2} (aq)[/tex] + [tex]2e^{-}[/tex]  

An electrode connected to negative terminal of the battery is called cathode. At cathode, reduction ( gain of electrons)  is takes place.

[tex]Zn^{+2} + 2e^{-}[/tex] → [tex]Zn(s)[/tex]

learn about anode.

https://brainly.com/question/4052514

#SPJ4

Other Questions
Computer speed is measured in . The computer processor speed is 4.5 GHz, which means the processor performs at 4.5 machine cycles per second. The CPU is responsible for 1.Which is not correct?a. Linear equation has the highest power of 1.b. Quadratic equation has the highest power 3c. Cubic equation has the highest power of 42.If a two-digit number changes its position reciprocally then the number increases by 54. The sum of digits of the two-digit number 12. Find the number.3.A class of 50 students appeared for an examination of law, Statistics and Accountancy. 25 students failed in law, 24 failed in Statistics, 32 failed in Accountancy, 9 failed in law alone. 6 failed in Statistics alone, 5 failed in Accountancy and Statistics only and 3 failed in law and Statistics only. Find Please help, 25 points! QUESTION 1. Element X on Planet Qatar has three known isotopes: X-121 with a relative abundance of 43.2%, X-123 with a relative abundance of 53.1%, and X-129 with a relative abundance of 3.70%. What is the average atomic mass in amu of Element X given this information?QUESTION 2.How did Rutherford's experiment change the way scientists had previously viewed atomic structure? How did this pave the way for subsequent changes up to and including the currently accepted quantum mechanical atomic model?QUESTION 3.How is percent abundance related to average atomic mass? Mi mejor amigo ______________ nervioso porque tiene un examen en la clase de matematicas hoy.estaestasestanestamos How does rainfall occur in the rainforest? A corporation is created by obtaining a charter from a state government. A charter application usually most be signer by the prospective stockholders called incorporators or promoters and then filed with the proper state official. when the application process is complete and fees paid, the charter is issued and the corporation is formed. Investors then purchase the corporation;s stock, meets as stockholders, and elect a board of directors. Directors oversee a corporation's affairs. Using the calculations for each ingredient:How much did Hector's homemade sandwich cost?Hint:Remember the total cost for the bread is $0.16.Add the $0.16 and the answers to questions 2, 4, 6, and 7 in order to get the total price for the sandwich. What is the Sin(B)? Need help! Bones in the legs, arms, spine and pelvis growA)at different rates. B)at the same rate. C)until age 18, then they stop. D)strongest after age 30. A machine gun fires 25-g bullets at the rate of 4 bullets per second. The bullets leave the gun at a speed of 1000 m/s. What is the average recoil force experienced by the machine gun?. Who used the word dictionary first? What was the major improvement to air quality contributed by the 1990 amendments to the Clean Air Act quizlet? How does the United state respond to soviet aggression in the years after wwll Use a trigonometric ratio to solve for c. Round to two decimal places as necessary!! HELP, and can someone explain how to get the answer? Espresso Express operates a number of espresso coffee stands in busy suburban malls. The fixed weekly expense of a coffee stand is $1,200 and the variable cost per cup of coffee served is $0.22. Required: 1. Fill in the following table with your estimates of the company's total cost and average cost per cup of coffee at the indicated levels of activity. 2. Does the average cost per cup of coffee served increase, decrease, or remain the same as the number of cups of coffee served in a week increases? Complete this question by entering your answers in the tabs below. Required 1 Required 2 Fill in the following table with your estimates of the company's total cost and average cost per cup of coffee at the indicated levels of activity. (Round the "Average cost per cup of coffee served" to 3 decimal places.) Cups of Coffee Served in a Week 2,000 2,100 2,200 Fixed cost Variable cost Total cost Average cost per cup of coffee served Required 1 Required 2 What are the three key principles in personal money management? PLEASEEEEEE HURRY!!!!!Read the passage from former President John F. Kennedy's Speech at American University. (7) Today the expenditure of billions of dollars every year of weapons acquired for the purpose of making sure we never need to use them is essential to keeping the peace. But surely the acquisition of such idle stockpiles-which can only destroy and never create-is not the only, much less the most efficient, means of assuring peace. I speak of peace, therefore, as the necessary rational end of rational men. I realize that the pursuit of peace is not as dramatic as the pursuit of war-and frequently the words of the pursuer fall on deaf ears. But we have no more urgent task. PROMPT: Analyze this passage. Discuss former President Kennedy's purpose in this passage. Provide evidence from the text to support your thinking, including in-text citations. yall better help me this is 45 points for one question if ya get it right u get brainliest too.(: This council of Mongol chiefs gathered together in 1206 and appointed Temujin as the leader of their tribes:A) Golden HordeB) Uyghur CouncilC) Council of KulikovoD) Kuriltai