Answer:
23.48
Explanation:
Good Luck!
Answer: 23.48 g
Explanation:
formula: mass = density x volume
Volume of copper = 2.62 cm^3
Density of copper = 8.96 g/cm^3
mass = 8.96 x 2.62 = 23.4752
225 million km to seconds
Answer:
You can't convert km to seconds because they are different units.
a magnesium ion has 12 protons and a charge of 2 . how many electrons does it contain?
Answer:
It contains 12 electrons.
what happens when carbon dioxide gas is cooled to -78 degree Celsius
Answer:
It will be solid
Explanation:
-78 C° is the freezing point of carbon dioxide, so at the temperature of -78 Celsius, the particles of carbon dioxide will come closer together and have about a fixed position to vibrate. The carbon dioxide will turn into solid. The solid form of carbon dioxide is also called dry ice.
what is the empirical formula of butenedioic acid
How is a stable hydrogen atom different from every other atom?
Answer:
a hydrogen atom contains only one proton in it's nucleus, while atoms of all other elements contain more than one proton
Brainliest plzz
what is the equilibrium concentration of co at 1000 k?
Answer: For the reaction, K c = 255 at 1000 K. If a reaction mixture initially contains a CO concentration of 0.1550 M and a Cl 2 concentration of 0.171 M at 1000 K. 1.
Explanation:
How can you tell the difference between two clear liquids
Answer:
To identify a pure liquid substance using the physical properties of solubility, density, and boiling point. The physical properties of a pure substance can be measured without changing the composition of the substance.
Explanation:
__H2 + __SO2 —> __H2S + __H2O identify the proper coefficients
Sasha did an experiment to study the solubility of two substances. She poured 100 mL of water at 20°C into each of two beakers labeled A and B She put 50 g of
Substance A in the beaker labeled A and 50 g of Substance B in the beaker labeled B. The solution in both beakers was stirred for 1 minute. The amount of substance
left undissolved in the beakers was weighed. The experiment was repeated for different temperatures of water and the observations were recorded as shown.
Experimental Observations
Mass of Undissolved Substance at Different Temperatures (gram)
20°C
40 °C
60°C
80 °C
Substance
А
12
11
9
8 8
B
45
40
34
31
Part 1: Which substance has a higher solubility?
Part 2: Explain your answer for Part 1
Answer:
Answer temperatures gram is correct because there is more of a mass of numbers and the numbers are higher. (don't really know this subject, just guessing, hope this helped.)
The substance A has higher solubility then substance B because the higher the temperature the easier the substance will dissolve.
What is solubility?The word solubility is defined as the ability of a substance, the solute, to form a solution with another substance, the solvent.
It can also be defined as a property that allow sugar molecule to dissolve.
It can be defined as at a given temperature, the amount of solute that can dissolve in a given amount of solvent.
In this reaction, increasing the pressure and temperature results in increased solubility. An increase in pressure causes more gas particles to enter the liquid, lowering the partial pressure.
For exothermic reaction the temperature increases with decrease in solubility and for endothermic reaction the temperature decreases with increase in solubility.
Thus, the substance A has higher solubility then substance B because the higher the temperature the easier the substance will dissolve.
To learn more about solubility, refer to the link below:
https://brainly.com/question/8591226
#SPJ5
In a bond between silicon (Si) and chlorine (CI), (answer here) will be more electronegative. A. silicon B. chlorine
Answer:
Chlorine
Explanation:
Chlorine has a valence shell of 7 electrons and chlorine is smaller in size, so it has a stronger pull/attraction on the electrons than Silicon.
is it NaCO3 or Na2CO3?
5. How many grams of calcium carbonate (CaCO3) are needed to maker 1 liter of 2-molar solution?
029
O 100.19
O 50.19
O 200.2g
Answer: Molar masses 40.8 and 100.1
Explanation:
Which models of the atom in task 1 are not supported by the results of the hydrogen gas experiment? For each of these models, explain the experimental results that the model would predict.
Answer:
Thomson placed two magnets on either side of the tube, and observed that this magnetic field also deflected the cathode ray. The results of these experiments helped Thomson determine the mass-to-charge ratio of the cathode ray particles, which led to a fascinating discovery, minus the mass of each particle was much, much smaller than that of any known atom. Thomson repeated his experiments using different metals as electrode materials, and found that the properties of the cathode ray remained constant no matter what cathode material they originated from. From this evidence, Thomson made the following conclusions:
The cathode ray is composed of negatively-charged particles.
The particles must exist as part of the atom, since the mass of each particle is only ~1/2000 the mass of a hydrogen atom.
These subatomic particles can be found within atoms of all elements.
While controversial at first, Thomson's discoveries were gradually accepted by scientists. Eventually, his cathode ray particles were given a more familiar name: electrons. The discovery of the electron disproved the part of Dalton's atomic theory that assumed atoms were indivisible. In order to account for the existence of the electrons, an entirely new atomic model was needed.
Explanation:
The boiling points of five liquids have been measured 10 times each by a team of scientists, with fairly consistent results. Which next step would be the most logical?
1. Test a sixth liquid to see if it follows patterns in the rest of the data.
2. Use a new thermometer to make sure that the original one was not faulty.
3. Continue collecting data until exact boiling points can be found.
4. Test the results an eleventh time, and average the new trial into the data.
Answer: Test a sixth liquid to see if it follows patterns in the rest of the data.
Explanation:
took the test
Temperature measures the average kinetic energy of particles of the substances. Therefore, the correct option is option A. Temperature is a physical quantity.
What is temperature?Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.
Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Heat always flow from higher temperature source to lower temperature source.
We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:
°C={5(°F-32)}÷9
The boiling points of five liquids have been measured 10 times each by a team of scientists, with fairly consistent results. the next step would be to Test a sixth liquid to see if it follows patterns in the rest of the data.
Therefore, the correct option is option A.
To know more about temperature, here:
https://brainly.com/question/13694966
#SPJ2
Examine the model of the different states of matter. Select ALL of the statements that accurately describe the particles in differing states. A) Gases contain less particles. B) Gases have the greatest kinetic energy. C) Energy is removed in the change from a liquid to a gas. D) Energy is added to change from a solid to a liquid state. E) In a solid, particles are so closely packed that they can only vibrate in place.
The statements which accurately describe the particles in differing states include:
Gases have the greatest kinetic energy.Energy is added to change from a solid to a liquid state. In a solid, particles are so closely packed that they can only vibrate in place.Gases have the greatest kinetic energy which explains why its particles
move very rapidly and randomly when compared to other states of matter.
Conversion from solid to liquid or liquid to gas requires more energy being
added.
The particles in solids are tightly packed with very restricted movements
which is why they are able to vibrate at a place.
Read more about Matter on https://brainly.com/question/3998772
calculate the number of atoms in a sample containing 3.5 g of silicon atoms
Answer:
there are 7. 505 x 1022 atoms in 3.5 grams of silicon.
Explanation:
So, 1 mole of silicon will have a mass of 28.0855 g and the number of atoms will be 6.022 x 1023. Therefore, there are 7. 505 x 1022 atoms in 3.5 grams of silicon.
Answer:
1 mole of silicon will have a mass of 28.0855 g and the number of atoms will be 6.022*1023 . Therefore , there are 7.505*1022 atom in 3.5 g of silicon .
What is the purpose of the chemical ammonia (NH3) in hair dyes?
Answer: Ammonia, an alkaline chemical, is used to raise the pH level (it's levels of acidity) of our hair during the colouring process. This then lifts the cuticles of the hair fibre and allows the colour to be deposited onto the cortex (the inner part of the hair protected by the cuticles). In hair coloring products, ammonium hydroxide is used to support the lightening action of hydrogen peroxide and to prepare hair to accept color pigments. Alkaline properties of ammonia raise the cuticle and allow peroxide and dye molecules to penetrate the hair shaft. (creds to the internet)
Explanation: Hope this helps! :D
Pls help if you only know the correct answer! Thanks! :)
18. the blank should be "[tex]CO_{2}[/tex]"
19. the question seems to be answered.
20. [tex]CH_{3}[/tex]
Passing an electric current through a sample of water (H2O) can cause the water to decompose into hydrogen gas (H2) and oxygen gas (O2) according to the following equation. 2H2O Right arrow. 2H2 O2 The molar mass of H2O is 18. 01 g/mol. The molar mass of O2 is 32. 00 g/mol. What mass of H2O, in grams, must react to produce 50. 00 g of O2? 14. 07 23. 05 28. 14 56. 28.
The mass of water decomposed to produce 50 g oxygen has been 56.28 g. Thus, option D is correct.
The reaction for the decomposition of water has been:
[tex]\rm 2\;H_2O\;\rightarrow\;H_2\;+\;O_2[/tex]
From the balanced equation, 2 moles of water decomposes to form 1 moles of hydrogen and 1 mole of oxygen.
The mass of oxygen produced has been 50 g. The moles of oxygen has been given by:
[tex]\rm Moles=\dfrac{mass}{molar\;mass}[/tex]
The moles of oxygen has been:
[tex]\rm Moles_O_2=\dfrac{50}{32}\;mol\\Moles_O_2=1.5625\;mol[/tex]
The moles of oxygen produced has been 1.5625 mol.
The moles of hydrogen decomposed has been given from the balanced chemical equation as:
[tex]\rm 1 \;mole\;O_2=2\;mole\;H_2O\\1.5625\;mol\;O_2=1.5625\;\times\;2\;mol\;H_2O\\1.5625\;mol\;O_2=3.125\;mol\;H_2O[/tex]
The moles of hydrogen decomposes has been 3.125 mol.
The mass of hydrogen decomposed has been given by:
[tex]\rm Mass=moles\;times\;molar\;mass\\Mass_{H_2O}=3.125\;\times\;18.01\;g\\Mass_{H_2O}=56.28\;g[/tex]
The mass of water decomposed to produce 50 g oxygen has been 56.28 g. Thus, option D is correct.
For more information about moles produced, refer to the link:
https://brainly.com/question/10606802
Why are ionic compounds not considered to be molecules?
Answer:
No, ionic compounds are crystals of infinite cations and anions bound together. There is no “molecule” of ionic compounds such as, for example, NaCl, because there are no single units of the compound.
Explanation:
Ionic compounds are not considered to be molecules because they do not consist of discrete, covalently bonded units like molecules.
In ionic compounds, the bonding occurs through the transfer of electrons from one atom to another, resulting in the formation of ions. These ions are held together by strong electrostatic attractions, known as ionic bonds.
Unlike molecules, which are formed by the sharing of electrons in covalent bonds, ionic compounds do not have individual units with fixed numbers of atoms. Instead, they exist as a three-dimensional lattice structure composed of alternating positive and negative ions. The ions are arranged in a repeating pattern throughout the crystal lattice.
Learn more about Ionic compounds, here:
https://brainly.com/question/30420333
#SPJ6
NO LINKS
Select the correct answer.
In which situation is chemical energy being converted to another form of energy?
A.
a lamp plugged into the electric grid
B.
a fluttering flag
C.
a floating wooden log
D.
a burning candle
Given the equation
N2(g) +3H2 (g)--> 2NH3 (g)
1 mole of N2 gas is needed to completely react with 3 moles of H2 gas.
How many molecules of H2 gas are needed?
Answer:
numbers of molecules = 3×6.023×10-23
How are elements arranged on the periodic table?
Question 10 options:
boiling point
atomic mass (# of protons and neutrons)
density
atomic number (# of proton
Answer: They are arranged by atomic number.
Perform the following
mathematical operation, and
report the answer to the correct
number of significant figures.
3.22 x 0.17 = [?]
Answer:
0.5474
Explanation:
3.22 x 0.17
\/
322 x 17 = 5,474
[] There are four places "after" the decimal in 3.22 and 0.17 combined, meaning we move the decimal to the right four times in our current answer
-> 5,474 becomes 0.5474
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
Answer:0.55
Explanation:
3.22 × 0.17 calculated with significant figures is 0.55, which has 2 sig figs and 2 decimals. There are 2 steps to calculate 3.22 × 0.17 with sig figs. 0.55 rounded to 1 sig figs is 0.6.
where is the atomic mass on the periodic table
Explanation:
At the upper left is the atomic number, or number of protons. In the middle is the letter symbol for the element (e.g., H). Below is the relative atomic mass, as calculated for the isotopes found naturally on Earth. At the very bottom is the name of the element (e.g., hydrogen).
The equation shows cellular respiration. During cellular respiration, glucose combines with oxygen to form carbon dioxide, water, and ATP. Uppercase C 6 uppercase H 12 uppercase O 6 6 uppercase O 2 right-arrow 6 uppercase C uppercase 0 2 6 uppercase H 2 uppercase 0 A T P What happens to the energy in the bonds in glucose?.
The energy in the bonds in glucose will be broken down and transferred to ATP molecules.
CELLULAR RESPIRATION:Cellular respiration is the process by which living organisms obtain energy by breaking down food molecules in their cells.
The equation for cellular respiration is as follows:
C6H12O6 + 6O2 → 6CO2 + 6H2O + ATP
Based on the illustration using the above equation, the energy stored in the bonds of glucose molecule is broken down and used to synthesize ATP molecules.
Learn more about cellular respiration at: https://brainly.com/question/12671790
Helppppp asaapppppp plzzzzzz
Answer:
Alright the very first thing you need to do is balance the equation:
2HCl + Na2CO3 -----> 2NaCl + CO2 + H2O
Now we need to find the limiting reactant by converting the volume to moles of both HCl and Na2CO3.
Volume x Concentration/molarity = moles
0.235L x 0.6 M = 0.141 moles / molar ratio of 2 = 0.0705 moles of HCl
0.094L x 0.75 M = 0.0705 moles /molar ratio of 1 = 0.0705 moles of Na2CO3
Since both of the moles are equal, it means the entire reaction is complete (while the identification of limiting reactant may seem like an unnecessary step, it's quite essential in stoichiometry, so keep an eye out) and there is no excess of any reactant.
Now we know that the product we want to calculate is aqueous so, following the law of conservation of mass, we should add both volumes together to calculate how much volume we could get for NaCl.
0.235 + 0.094 = 0.329L of NaCl
Now we apply the C1V1 = C2V2 equation using the concentration and volume of Na2CO3 because it's molar ratio is one to one to NaCl (You can also use HCL, but you have to divide their moles by 2 for the molar ratio) and the volume we just calculated for NaCl.
(0.75M) x (0.094L) = C2 x (0.329L)
Rearrange equation to solve for C2:
(0.75M) x (0.094L) = C2
(0.329L)
C2 = 0.214 M (Rounded)
When the reaction is finished, the NaCl solution will have a molarity concentration of 0.214 M.
When water changes state from solid to liquid to gas, ALL BUT one thing happens. There is no
A) chemical change.
B) physical change.
C) addition of energy.
D) increase in temperature.
12. Draw the dot diagram for a molecule of P2
[show your work and draw a box around your answer]
Explanation:
download the app topper
[tex]\rule{2000pt}{1000000pt}[/tex]
mamama
what is the mass of 3.0 x x times 10^23 atoms of neon?
Answer:
10.09 grams
Explanation:
First you need to know the number of moles you are dealing with.
If you know that each mole has 6.022x10²³ of something (in this case of atoms), you can divide 3x10²³ atoms of neons by 6.022x10²³ to obtain the number of moles.
You have 0.5 moles of Neon, so then by the periodic table, you see that the molar mass of neon is 20.18g/mol, so by each mole you have 20.18 grams of neon. Multiply 20.18 grams by 0.5 moles and you got 10.09 grams of Neon