Determine if the following two structures are
identical, isomers, or unrelated?

Answer: The volume of the solution is 85.7 mL

Explanation:

Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:

[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)

We are given:

Molarity of solution = 0.600 M

Given mass of [tex]BaSO_4[/tex] = 12.00 g

We know, molar mass of [tex]BaSO_4=[(1\times 137.33)+(1\times 32.07)+(4\times 16)]=233.4g/mol[/tex]

Putting values in equation 1, we get:

[tex]0.600=\frac{12.00\times 1000}{233.4\times \text{Volume of solution}}\\\\\text{Volume of solution}=\frac{12.00\times 1000}{233.4\times 0.600}=85.68mL=85.7mL[/tex]

The rule of significant number that is applied for the problems having multiplication and division:

The least number of significant figures in any number of the problem determines the number of significant figures in the answer.

Here, the least number of significant figures is 3 that is determined by the number, 0.600. Thus, the answer must have these many significant figures only.

Hence, the volume of the solution is 85.7 mL

Answer:

4.000   hope this helps :)

Answer:

solutions are homogeneous mixtures of two or more solutes in a solvent

solubility is the ability of a solute to dissolve in a solvent

Explanation:

hope this is helpful

Explanation:

hope the picture above help u understand:)

The relative atomic mass (Ar) of this element is approximately 63.6 (to three significant figures).

To determine the relative atomic mass (Ar) of the element, we use the following formula:

Ar = (m₁ × % abundance1 + m₂ × % abundance2) / 100

Where:

m₁ and m₂ are the masses of the isotopes (peaks) in the mass spectrum,

% abundance1 and % abundance2 are the percentage abundances of the corresponding isotopes.

Given information:

Peak at m/z 63.0 with a percentage abundance of 69.1%.

Peak at m/z 65.0 having a percentage abundance of 30.9%.

Calculate the weighted average mass of the element's isotopes.

Ar = (63.0 × 69.1 + 65.0 × 30.9) / 100

Ar = (4347 + 2009.5) / 100

Ar = 6356.5 / 100

Ar ≈ 63.565

Noe, let's round the calculated mass to three significant figures.

Ar = 63.6

So, the relative atomic mass (Ar) of this element is approximately 63.6 (to three significant figures). This means that the average mass of the element's atoms is approximately 63.6 times the mass of one-twelfth of a carbon-12 atom, which is the standard reference for atomic masses.

To know more about relative atomic mass here

https://brainly.com/question/25698972

#SPJ3

Answer:

See explanation

Explanation:

Let us recall that the basic rule in writing balanced chemical reaction equations is that the number of atoms of each element on the right hand side of the reaction equation is the same of the number of atoms of the same element on the left hand side of the reaction equation.

The reaction of red hot iron and steam is written as follows;

3Fe + 4H2O → Fe3O4 + 4H2.

The decomposition reaction of ammonium dichromate is written as;

(NH4)2Cr2O7 → N2 + Cr2O3 + 4H2O

Reaction of aluminium, sodium hydroxide and water is as follows,

2Al + 2NaOH + 2H2O ----> 2NaAlO2 + 3H2

Reaction of potassium bicarbonate with sulphuric acid;

2KHCO3 + H2SO4 -------> K2SO4 + 2H2O + 2CO2

Reaction of zinc and sodium hydroxide is as follows;

Zn + 2NaOH→Na2ZnO2 + H2

Vapourization and condensation. the actual 1 shud be vapourization.

Answer:

True po

Explaination :

I hope it helps

Answer:

red blood cells and diffusion.

Explanation:

this process involves red blood cells and diffusion. Red Blood cells (RBCs) are a type of blood cell whose role is to transport oxygen from the lungs to the peripheral tissues of the body. Oxygen diffuses from the alveoli of the lungs in to the RBC's, where it binds to hemoglobin.

Diffusion is a very important process within the human body and is essential to the transport of molecules within a number of organs including the lungs, kidneys, stomach and eyes. The lungs process millions of tiny air sacs that are called alveoli, each of which are in close contact with capillaries.

Answer:

Dependent variable

Explanation:

In every experiment, there must be a dependent variable and an independent variable.

The independent variable is that variable that you have to manipulate in order to receive a response. E.g, in the experiment described in the question, the amount of sunlight a sunflower plant receives is the independent variable.

The dependent variable is the number of seeds produced. It is the response obtained by carefully manipulating the amount of sunlight

Answer:

D).

[tex]{ \tt{NO_{3} {}^{ - } }}[/tex]

Explanation:

The nitrate ion because it is a radical with a valence of 1, forming sodium nitrate.

[tex]{ \tt{Na {}^{ + } .NO _{3} {}^{ - } }}[/tex]

The polyatomic ion that does form an ionic compound with a single sodium ion (Na^+) is NO3^- .

A polyatomic ion is an ion that contains more than one atom. Recall that an ion is any chemical specie that contains a positive or negative charge. Sodium is a member of group 1 and forms a univalent positive ion.

The polyatomic ion that does form an ionic compound with a single sodium ion (Na^+) is NO3^- and the compound is NaNO3.

Learn more: https://brainly.com/question/8592296?

Answer:

B.

Explanation:

The electron dot diagram which is also known as the Lewis electron dot diagram is a diagram that shows an atom's valence electrons by placing dots, which represent the valence electrons of the element, around the elements symbol

The element for which the electron dot diagram is found = Neon, Ne

The atomic number of neon, Ne = 10

The electronic configuration of neon = 1s²2s²2p⁶

The valence shell is the outermost shell having   the highest value of the coefficient of the orbitals, n = 2s²2p⁶

The number valence electrons in neon = The number of electrons in the valency shell = 2 electrons + 6 electrons = 8 electrons

The number of valence electrons in neon = 8

Therefore, the electron dot diagram for neon will have 8 dots located around the Ne symbol, which gives option B

Answer:

B. all organisms are made of at least one cell.

C.cells are the building blocks of life.

D.all cells come from preexisting cells

Explanation:

According to the cell theory that was proposed via the contribution of three scientists in 1830's namely: Matthias Schleiden, Theodor Schwann, and Rudolf Virchow, the following was stated:

- Cells are the basic and fundamental unit of life

- Living organisms are made up of one or more cells

- All cells arise from pre-existing cells.

From the above components, the following are said to be true and correlate with the universal cell theory:

B. all organisms are made of at least one cell.

C.cells are the building blocks of life.

D.all cells come from preexisting cells

Answer:

V= 13 m/s

Explanation:

We're asked to find the magnitude of the object's velocity after a force is applied for

3

s

parallel to its motion.

We'll call the direction it's moving the positive

x

-axis, and the direction of the applied force the positive

y

-axis.

The components of the initial velocity are

v

0

x

=

5

m/s

v

0

y

=

0

(It's moving at

5

meters per second in the straight line we called the

x

-axis.)

We know the object's mass is

3

kg

, and the force applied is

12

N

in the positive

y

-direction. The magnitude of the constant acceleration is thus

a

y

=

∑

F

y

m

=

12

l

N

3

l

kg

=

4

m/s

2

Since this acceleration is directed upward, and the initial

y

-velocity is

0

, we can use the kinematics equation

v

y

=

v

0

y

+

a

y

t

to find the

y

-velocity after

3

seconds.

Plugging in known values, we have

v

y

=

0

+

(

4

l

m/s

2

)

(

3

l

s

)

=

12

m/s

No acceleration was applied in the

x

-direction, so it's

x

-velocity remains

5

m/s

. The magnitude of the velocity is thus

v

=

√

(

v

x

)

2

+

(

v

y

)

2

=

√

(

5

l

m/s

)

2

+

(

12

l

m/s

)

2

=

13

m/s

Answer:

copper

Explanation:

so for this you can work out the mass for both and compare

so mass = moles × mr

so mass of sodium = 1 × 23= 23 g

and mass of copper = 1 × 63.5= 63.5 g

so copper have more mass :)

Answer:

Aldehyde

Explanation:

1-bromo-1-1diphenylpropane

Answer:

C

Explanation:

Electromagnetic waves travel at the speed of light and do not require molecules (gas, solid or liquid) to vibrate and travel.

Soundwaves when singing or from thunder vibrate particles to reach our ears and are known as mechanical waves.

Answer:

b temperature

Explanation:

Temperature is a measure of the average kinetic energy of the particles in a substance

Answer:

C.because protons and electrons are equal they will be 38 so neutron will be 50

D. 8

Hope this helps! :)

______________

Answer:

D: 8 neutrons would make it most stable

Answer:

The offspring are all black eye colored.

Explanation:

Since we have genes BB for black eye color and genes bb for brown eye color, crossing the genes, the resulting genotypes in the offspring is Bb, Bb, Bb and Bb. We note that all the genes have the dominant B gene. Since the black eye color dominant gene is present in all the offspring, the offspring are thus all black-eye colored.

So, If you will cross a parent with black eye color (BB) and the other is

brown eye (bb), the offspring are all black eye colored.

Answer:

C. natural gas

Explanation:

Solar comes from the sun, which if it became nonrenewable, we would be dead. hydroelectric comes from water and Dams, which water is reproduced through rain. Biomass are things like leaves, which are seasonally reproduced.

Answer:

ClxOy + H2 > HCl + H2O

HCl = 0.233/37 = 0.006 mol H2O = 0.403/180.02 mol

HCl = 0.006/0.022 H2O = 0.022/0.006

= 1 = 4

Cl2O4 + 5H2 > 2HCl + 4H2O

I'm think that's the answer

Answer:

B

Explanation:

production ca3(PO4)2

4x2=8

Answer:

C

Explanation:

Photosynthesis is use of light(photo---solar energy) to make(synthesize) food(chemical energy) and is done by producers(plant)

Explanation:

Dinitrogen monoxide: covalent bond

copper(||) hydroxide: ionic bond

Butane: Covalent Bond

Answer

Disulfur decafluoride S2F10 covalent

calcium sulfide  CaSO3 ionic

Diphosphorus tetraiodide P2I4 ionic

dinitrogen monoxide  N2O   ionic

Aluminum chloride  AlCl3  covalent

copper(II) hydroxide  Cu(OH)2  ionic

barium sulfate BaSO4  covalent

butane  C4H10  covalent

Explanation:

edmentum

Answer:1.205g

Explanation:

Answer:

H2 + CaCl2 -> 2HCl + Ca

How many grams of HCl are made when 2.93 g of

Ca are made?

Explanation:

From the given balanced chemical equation, it is clear that:

2mol. of HCl and 1mol. of Ca are produced.

2mol. of HCl weighs --- 73.0g

1mol. of Ca weighs --- 40.0g

Hence,

73.0g of HCl and 40.0g of Ca are produced.

When 2.93g of Ca is produced then, how many grams of HCl will be produced?

[tex]=> 2.93g Ca * \frac{73.0g HCl}{40.0g Ca} \\=5.35g HCl[/tex]

Hence, 5.35g of HCl is formed.

Answer:

which elements??? more info please