Electromagnetic waves travel fastest through
A -Solid
B -Liquid
C -Gas
D-Vacuum

Answers

Answer 1

Answer:

Gas

Explanation:

Mechanical waves- travel faster in solids & slowest in gases

Electromagnetic waves- travel fastest in empty space and slowest in solids.

Because they are so close, than can collide very quickly, i.e. it takes less time for a molecule of the solid to 'bump' into its neighborough. Solids are packed together tighter than liquids and gases, hence sound travels fastest in solids. The distances in liquids are shorter than in gases, but longer than in solids.

Answer 2

Answer C- Gas

Explanation:

Electromagnetic waves- travel fastest in empty space and slowest in solids.


Related Questions

Radio waves bounce off of _____________ before returning to Earth

Answers

Answer:   ionosphere

Explanation:       First it bounces off a top layer of the atmosphere called the ionosphere, then it bounces back to the Earth (this is reflection. It then bounces up again to the ionosphere, and continues bouncing back again until it reaches the radio receiver. This is called a skywave, which works around 3 to 30 MHz.

5. What is the systemic name for the following structure?

Answers

Answer:

You are not showing the question, but I believe the answer is cis-3,4-dimethyl-3-hexene.

Explanation:

since the substituents are on same side, it call cis. Followed by the name.

The process of returning mines to their original state is called ________________________.

Answers

Answer:

Mine Reclamation.

Explanation:

The process of returning mines to their original state is called Mine Reclamation. HOPE THIS HELPS :)

For the reaction C + O2 = CO2, if 3 grams of carbon react with the oxygen, how many grams of carbon dioxide are produced?

Answers

3gC x 1molC/12.011gC x 1molCO2/1molC x 44.011gCO2/1molCO2

This gives you 10.99267338g CO2

10 g CO2 if it is one sig fig
11.0 g CO2 if it is two sig fig

The sun, fire, lightnings and fireflies are all

Answers

Answer: Natural sources of light

please give brainliest

Answer:

Natural source of light

Explanation:

Please Mark Me Brainlest Me

#CarryOnLearning

classify each of the statements about gases as true or false. oxygen molecules at 25 celsius are moving faster than oxygen

Answers

Since gas molecules average velocity depends on temperature, oxygen molecules at 25°C are moving faster than oxygen molecules at 0 °C.

According to the kinetic theory of gases, the molecules of a gas are in constant random motion and collide frequently with each other and the walls of the container.

The average speed of gas molecules depends on temperature and molar mass as shown by the relation;

vrms = √3RT/M

The following statement are true among the options provided;

Oxygen molecules at 25°C are moving faster than oxygen molecules at 0 °C Gases exert pressure by colliding with container walls

The following are false among the options provided;

All hydrogen molecules are moving with the same velocityNitrogen gas exerts more pressure than hydrogen gas because nitrogen molecules are heavier than hydrogen molecules. Nitrogen molecules remain suspended in the atmosphere because they are not attracted to Earth by gravitational forces.

Learn more: https://brainly.com/question/6505878

how is waste removed from the body

Answers

Waste is removed from the body in various ways. Kidneys filter out metabolic waste, excess fluid and eliminate it in the form of urine. Lungs exhale CO2 from the deoxygenated blood. The undigested solid waste is egested out from the large intestine. Excretion is the process of removing wastes and excess water from the body. It is one of the major ways the body maintains homeostasis. Organs of excretion make up the excretory system. They include the kidneys, large intestine, liver, skin, and lungs.

Maybe drinks such as kombucha or alcohol to get rid of bacteria replacing with good bacteria

What identifies the number of protons in the nucleus of an atom?

Answers

Answer: Atomic number

Explanation:

I hope this helps you!

Thin-layer chromatography explain ?????​

Answers

Answer:

Explanation:

Thin-layer chromatography (TLC) is a chromatography technique used to separate non-volatile mixtures. ... After the sample has been applied on the plate, a solvent or solvent mixture (known as the mobile phase) is drawn up the plate via capillary action.

10. Select the more polar bond in each of the following pairs: a) C and N or C and o b) N and F or N and O.

Answers

A) C and O
B) N and F

A pan containing 40 grams of water was allowed to cool from a temperature of 91.0 °C. If the amount of heat released is 1,300 joules, what is the approximate final temperature of the water? 74 °C 78 °C 81 °C 83 °C

Answers

Answer:

d. 83 °c

Explanation:

Answer:

D. 83 c

Explanation:

took the test

list atleast two examples of Arrhenius acids?​

Answers

Answer:

HCl (hydrochloric acid) and H2SO4 (sulphuric acid)

I hope it helps.

Can someone help me out with this question and explain me the answer too!!! Please

Answers

Answer:

sorry i dont know

Explanation:

Milkweed contains a poison known as cardenolides. Monarch butterflies eat the milkweed plant and hold on to this toxic compound. The chemical formula for cardenolides is shown below.
CH18C20H15CHCO2

How many atoms of each element are in one molecule of cardenolides?




A)
34 carbon atoms, 43 hydrogen atoms, and 2 oxygen atoms




B)
42 carbon atoms, 23 hydrogen atoms, and 2 oxygen atoms




C)
20 carbon atoms, 33 hydrogen atoms, and 2 oxygen atoms




D)
23 carbon atoms, 34 hydrogen atoms, and 2 oxygen atoms

Answers

Answer:

the answer is D) 23 carbon atoms, 34 hydrogen atoms, and 2 oxygen atoms

Explanation:

i took the test and got a 100%

Magnesium has a density of 1.74 g/cm3. What is the volume of 58.6 g of Mg?

Answers

Answer:

1 kg = 1000 g

58.6=58,600g

Explanation:

If you have an aqueous solution that is 13.5 % Na3PO4 by mass, what is the molality of Na3PO4 in the solution?

Answers

Considering the definition of percentage by mass and molality, the molality of Na₃PO₄ in the solution is 0.948 [tex]\frac{moles}{kg}[/tex].

Percentage by mass

The percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.

In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.

The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:

[tex]percentage by mass=\frac{mass of solute}{mass of solution}x100[/tex]

Molality

Molality is the ratio of the number of moles of any dissolved solute to kilograms of solvent.

The Molality of a solution is determined by the expression:

[tex]molality=\frac{number of moles of solute}{kilograms of solvent}[/tex]

This case

Considering 100 grams as a sample of the solution, then the value of the percentage of concentration given indicates that  13.5 g correspond to Na₃PO₄.

Remember that percent concentration by mass is calculated using the mass of solute and the mass of the solution, which includes both the solute and the solvent. Then:

mass solution= mass solute + mass solvent

100 g= 13.5 g + mass solvent

100 g - 13.5 g= mass solvent

86.5 g= mass solvent

Then, you know:

number of moles of solvent=  [tex]13.5 gramsx\frac{1 mole}{163.94 grams} =0.082 moles[/tex] being 163.94 [tex]\frac{grams}{mole}[/tex]the molar mass of Na₃PO₄, this is the amount of mass a substance contains in one mole.mass of solvent= 86.5 grams= 0.0865 kg (being 1000 g= 1 kg)

Then, replacing in the definition of molality:

[tex]molality=\frac{0.082 moles}{0.0865 kg}[/tex]

Solving:

molality= 0.948 [tex]\frac{moles}{kg}[/tex]

Finally, the molality of Na₃PO₄ in the solution is 0.948 [tex]\frac{moles}{kg}[/tex].

Learn more about:

mass percentage:brainly.com/question/19168984?referrer=searchResultsbrainly.com/question/18646836?referrer=searchResultshttps://brainly.com/question/20037730?referrer=searchResultshttps://brainly.com/question/25148948molalitybrainly.com/question/20366625?referrer=searchResultsbrainly.com/question/4580605?referrer=searchResults

plate tectonics-1.gif
What is the above image a representation of?

Answers

Answer:

Subduction Process where the oceanic plate subducted under the continental plates because it denser than the Continental plate.

Calculate the second ionization energy of the metal M (?Hion2� in kJ/mol) using the following data:


Lattice enthalpy of MO(s), ?Hl� = -2383 kJ/mol

Bond dissociation enthalpy of O2(g) = +498 kJ/mol

First electron affinity of O = -141 kJ/mol

Second electron affinity of O = +744 kJ/mol

Enthalpy of sublimation of M = + 130 kJ/mol

First ionization energy of M = + 267 kJ/mol

Standard enthalpy of formation of MO(s), ?Hf� = -307 kJ/mol

Answers

From the information provided in the question, the second ionization energy of the metal is  578 kJ/mol.

From the question, we have the following information;

Lattice enthalpy of MO(s) = -2383 kJ/mol

Bond dissociation enthalpy of O2(g) = +498 kJ/mol

First electron affinity of O = -141 kJ/mol

Second electron affinity of O = +744 kJ/mol

First ionization energy of M = + 267 kJ/mol

Heat of sublimation of M = + 130 kJ/mol

Standard enthalpy of formation of MO(s) = -307 kJ/mol

Using Hess law of constant heat summation;

ΔHf = ΔHs + BE + ∑IE + ∑EA + U

ΔHs  = Heat of sublimation of metal

ΔHf = Heat of formation MO

BE = Bond energy of O2

∑EA  = sum of electron affinities of Oxygen

∑IE  = Sum of the ionization energies of M

U = Lattice energy of MO

Let the second ionization energy be x

Substituting values;

(-307) = 130 + 498 + (267 + x) + 603 + (-2383)

(-307) = -885 + x

-x =   -885 + 307

-x = -578

x = 578 kJ/mol

The second ionization energy of the metal is  578 kJ/mol.

Learn more: https://brainly.com/question/11155928

5. Select the answer for both questions ​

Answers

Answer:

engey

Explanation:

17.
In the reaction N2 + 3H2 → 2NH3 how many moles of ammonia will be produced from 1.30 mol
of hydrogen and excess nitrogen?

Answers

According to the equation given, we have N2 + 3H2 → 2NH3.

Therefore, to determine the moles of NH3 we have to do the following-

1.3 mol H2 × 2 mol NH3 / 3 mol H2 = 0.87 mol

Answer: .87 moles of NH3 are produced from 1.3 moles of H2.

I hope this helps!

a. Calculate the change in enthalpy when 20.0 grams of aluminum metal is heated from 298 K to 573 K at constant pressure of 1 atm.
b. Calculate the change in enthalpy when 20.0 grams of metallic lead is taken through the same process. In both cases assume the heat capacity values predicted by equipartition are valid through the temperature range stated.

Answers

Choose all options that apply. Which of the following measurements are equivalent to six feet? a) 72 inches b) 3 meters c) 182.88 cm O d) 1.25 yards

Name the following Type 1 compounds:
1. Naci
2. KI
3. Cas
4. CsBr
5. Mgo
6. CSF
7. AICI:
8. Mg2
9. Rb20
10.Sr12
11.KAS

Answers

Answer:

44

Explanation:

Three test tubes contain aqueous hydrogen sulfide, aqueous sulfur-dioxide and Lugol reagent. By mixing any two of the three test tubes, identify their contents. Explain, stating reasons, how you arrive at your conclusions. Write equations whenever applicable.

Answers

Answer:

Initial rate experiments

The simplest initial rate experiments involve measuring the time taken for some recognizable event to happen early in a reaction. This could be the time required for 5 cm3 of gas to be produced, for a small, measurable amount of precipitate to form, or for a dramatic color change to occur. Examples of these three indicators are discussed below.

The concentration of one of the components of the reaction could be changed, holding everything else constant: the concentrations of other reactants, the total volume of the solution and the temperature. The time required for the event to occur is then measured. This process is repeated for a range of concentrations of the substance of interest. A reasonably wide range of concentrations must be measured.This process could be repeated by altering a different property.

Explanation:

I don't think so if this is the answer. if not ok sorry

Which two substances are reactants in the chemical reactions of cellular respiration?

Answers

Answer:

The answer is A and C.

Explanation:

The reactants in the process of cellular respiration are oxygen and glucose, respectively. It is ATP that serves as the primary product of cellular respiration, with carbon dioxide and water serving as waste products.

Sugar is a glucose.

Oxygen and glucose are the two  substances that are reactants in the chemical reactions of cellular respiration. Therefore, the correct options are options A, C.

What is cellular respiration?

Through the process of cellular respiration, organisms mix oxygen with food molecules, directing the chemical energy contained in these substances towards life-sustaining processes while excreting carbon dioxide and water as waste. Foods are broken down by microorganisms that do not require oxygen in a process known as fermentation.

Adenosine triphosphate (ATP), an energy-rich compound that absorbs the chemical energy generated by the decomposition of food molecules then releases it to power other cellular functions, is one goal of the breakdown of foodstuffs. ATP is created when the energy found inside chemical bonds is converted from one form to another. Oxygen and glucose are the two  substances that are reactants in the chemical reactions of cellular respiration.

Therefore, the correct options are options A, C.

To know more about cellular respiration, here:

https://brainly.com/question/29760658

#SPJ2

answer this please........

Answers

Your answer will be:
D. River Spey is 2* warmer that River Canon

Have a great day or night!

(please mark brainliest)

Find the volume of 0.170 M sulfuric acid necessary to react completely with 72.2 g sodium hydroxide.

Answers

The volume of sulphuric acid, H₂SO₄ needed for the complete reaction with 72.2 g of sodium hydroxide, NaOH is 5.31 L

We'll begin by calculating the number of mole in 72.2 g of NaOH. This can be obtained as follow:

Mass of NaOH = 72.2 g

Molar mass of NaOH = 23 + 16 + 1 = 40 g/mol

Mole of NaOH =?

Mole = mass / molar mass

Mole of NaOH = 72.2 / 40

Mole of NaOH = 1.805 mole

Next, we shall determine the number of mole of H₂SO₄ needed to react with 1.805 mole of NaOH.

2NaOH + H₂SO₄ —> Na₂SO₄ + 2H₂O

From the balanced equation above,

2 moles of NaOH reacted with 1 mole of H₂SO₄.

Therefore,

1.805 mole of NaOH will react with = 1.805 / 2 = 0.9025 mole of H₂SO₄.

Finally, we shall determine the volume of H₂SO₄.

Mole of H₂SO₄ = 0.9025 mole

Molarity of H₂SO₄ = 0.170 M

Volume of H₂SO₄ =?

Volume = mole / Molarity

Volume of H₂SO₄ = 0.9025 / 0.170

Volume of H₂SO₄ = 5.31 L

Thus, the volume of H₂SO₄ needed for the reaction is 5.31 L

Learn more: https://brainly.com/question/14356462

Glucose can be found in foods like honey. What happens to glucose in the body?
OA. It goes through chemical reactions with carbon dioxide, which provides oxygen and energy for cells.
ОВ.
It goes through a physical change in the cell's nucleus to produce oxygen.
OC.
It uses carbon dioxide in the cell's nucleus to produce a larger sugar molecule.
OD.
It goes through chemical reactions with oxygen, which forms new molecules and provides energy for cells. Will Give Brainliest No
Links

Answers

Answer:It goes through chemical reactions with oxygen, which forms new molecules and provides energy for cells.

Oxidation unit test
Please help ASAP!!!

Which statement correctly describes the oxidation number of the manganese atom (Mn) in Mnl2 and MnO2?

O Manganese has an oxidation number of +4 in Mnl2 and +2 in MnO2.
o Manganese has an oxidation number of +2 in Mnl2 and +4 in MnO2.
o Manganese has an oxidation number of +4 in both Mnl2 and MnO2.
Manganese has an oxidation number of +2 in both Mnl2 and MnO2.

Answers

In this case, according to the given information about the oxidation numbers and the compounds given, it turns out possible to figure out the oxidation number of manganese in both MnI2, manganese (II) iodide and MnO2, manganese (IV) oxide, by using the concept of charge balance.

Thus, we can define the oxidation state of iodine and oxygen as -1 and -2, respectively, since the former needs one electron to complete the octet and the latter, two of them.

Next, we can write the following [tex]x[/tex], since manganese has five oxidation states, and it is necessary to calculate the appropriate ones:

[tex]Mn^xI_2^-\\\\Mn ^xO_2^{-2}[/tex]

Next, we multiply each anion's oxidation number by the subscript, to obtain the following:

[tex]Mn^xI_2^-\rightarrow x-2=0;x=+2\\\\Mn ^xO_2^{-2}\rightarrow x-4=0;x=+4[/tex]

Thus, the correct choice is Manganese has an oxidation number of +2 in Mnl2 and +4 in MnO2.

Learn more:

https://brainly.com/question/15167411 https://brainly.com/question/6710925

HELP I WILL MARK BRAINLIST
I HAVE 10 MINUTES

Which phrase correctly describes the effect of pressure on the solubility of a gas in a liquid?



1) proportional to the square root of the pressure of the gas above the liquid



2) directly proportional to the pressure of the gas above the liquid



3) inversely proportional to the pressure of the gas above the liquid



4) unrelated to the pressure of the gas above the liquid

Answers

Answer:

Answer is 2

Explanation:

directly pro

Which of the following describes how air resistance affects the motion of a falling object?

Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.

Air resistance may change the direction of a falling object but does not affect its speed.
Air resistance may change the direction of a falling object but does not affect its speed.

Air resistance works with gravity to pull a falling object towards the Earth.
Air resistance works with gravity to pull a falling object towards the Earth.

Air resistance opposes the force of gravity and causes an object to reach terminal velocity.
Air resistance opposes the force of gravity and causes an object to reach terminal velocity.

Answers

Air resistance opposes the gravity in a falling object hence the object loses speed once it reaches terminal velocity.

According to the experiment of Galileo, in the absence of air resistance, all objects that are thrown down from the same height will hit the ground at he same time due to the effect of gravity.

We know that the air resistance makes the acceleration of object to become less than the acceleration due to gravity. So, air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.

Learn more: https://brainly.com/question/865531

Answer:

The answer is D - Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.

Ill explain why -, for example ,

When the paper is smooth, it exposes a large surface to the air beneath it which slows its descent. Once it is crumpled, the surface which comes in contact with the air is much smaller, allowing it to fall much faster.  At first, you probably thought the book would touch the ground first since it is heavier However, once the piece of paper was crumpled, they hit the ground at the same time! Funny, since it is the same piece of paper and the book is still heavier. It all comes down to form. I hope this helped u with the test !!

Other Questions
An interior designer hangs canvas paintings along a hallway. If the interior designer uses canvas paintings with length measuring 9 inches and places them side by side along the hallway that has a length of 24 feet, how many paintings does the designer hang? Open-ended interviews, questionnaires, and psychological tests comprise a ______ approach to the assessment of victims and offenders. which of the following is a multiple of 2A. 2461 B. 1000C. 75D. 847the answer is B. 2*500 What type of fault has the geologist found? normal fault reverse fault divergent fault strike-slip fault. YES I WILL MARK BRAINLIST:DSarah is going to the food truck with her friends. Hot dogs cost $2 and drinks cost $3. She has a total of $24 that she can spend. The equation 2x+3y=24 represents this scenario. Determine the amount of hotdogs that can be purchased if Sarah orders 4 drinks.Question 4 options:4 hotdogs7 hotdogs6 hotdogs5 hotdogs What phase of mitosis is pictured below? Two ways why a city farm or garden is different form a rual farm or garden The Embargo Act of 1807 had which of the following effects on the United States? Find the cost per roll if a bag of five lunch rolls is $2.50. What is the answer person with correct answer gets marked brainliest A car is traveling 70km in 45 minutes. How many miles an hour is the car traveling? if you have a bacteria cell that you touch at 9:00 am (so now you have one cell on you) and it multiplies every 20 mins how much will i have on me at 4:00 Use the formula for annual compound interest. A = P (1 StartFraction r Over n EndFraction)nt Remember, A refers to the total amount owed. Calculate the total amount that Tom would repay. $10,337 $11,337 $12,337 $13,337. If you have to decide to claim a credit or deduction on your taxes which should you take? if angle d is 15 what is angle CED? Angular unit test how to use jest with karma. A box of pens cost $6.50 and a box of pencils is $4.00. Jane gets 15% commission of each box of pencils sold. Calculate Jane's commission if sells 20 boxes 2. How many tens are in 9 hundreds? what does cost-effective mean? im kind of confused on cost-effective and time-effective things and i keep getting mixed up :( Describe two important details about industrialization in Europe in the 19th century