Element X has two isotopes. The first isotope has a natural abundance of
70% and has a mass of 50 amu. The second isotope has a natural
abundance of 30% and has a mass of 54 amu. Is the average mass
going to be closer to 50 or 54 amu and why?

The element has the lowest 1st ionization energy is N ( nitrogen). Th correct answer is C.

First, the energy needed to remove one electron from a neutral atom in order to create a positive ion is referred to as the ionization energy or ionization potential. It is described as the energy difference between a neutral atom's and a positive ion's ground states.

The ease with which an atom can lose electrons and produce positive ions makes the initial ionization energy a crucial chemical feature of an element.

Higher first ionization energy suggest that removing an electron from an atom is more challenging, whereas lower first ionization energies suggest that removing an electron from an atom is simpler.

For each element, the first ionization energy varies, and it can be used to determine an element's electron configuration, electron affinity, reactivity, and chemical behavior.

Since nitrogen is a nonmetal, it has a lower initial ionization energy than metal elements like bismuth (Bi) or antimony (Sb).

Learn more about First ionization energy here: brainly.com/question/2120186

#SPJ4

The balanced chemical equation for the combustion of diesel is 2 C₁₆H₃O+15 O₂[tex]\rightarrow[/tex]32 CO₂ +3 H₂O.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ9

The boiling point or temperature at which methane molecule, CH₄, in its liquid state starts to form vapours is equals to the -258.9°F.

Methane: The molecular formula of methane is CH₄. Like other chemical compounds, methane also has physical properties, including boiling point, melting point, freezing point, etc. The boiling point is the temperature at which methane becomes a gas. The boiling point is the temperature at which the pressure exerted by the surroundings on the liquid equals the pressure exerted by the vapor of the liquid. It is a molecule with no hydrogen bonding (visible only between N/O/F and H), and since hydrogen bonding is by far the strongest intermolecular force, methane boils the coldest. It also has no permanent dipole permanent dipole forces due to it being tetrahedral so all the dipoles cancel and thus boils at a very low -162 °C. Therefore, the boiling point of methane is -258.9°F.

For more information about boiling point, visit :

https://brainly.com/question/4219986

#SPJ4

The C₃H₆ lewis structure is as follows :

    H       H

     ..        ..

    C :: C : C : H

     °°      °°     °°

     H      H    H

The C₃H₆ that is the Propene is the  lewis structure that has three Carbon atoms (C) is at the center and the carbon atoms are surrounded by the Hydrogen atoms (H). The compound will contains the six C-H bonds, the one C-C bond and the one C=C bond. The propene is the unsaturated hydrocarbon.

The Lewis structures, also called as the Lewis dot formulas, or the Lewis dot structures, or the electron dot structures, or the Lewis electron dot structures.

To learn more about lewis structure here

https://brainly.com/question/20300458

#SPJ4

The Lewis structure for C3H6 (propene) is created by connecting 3 carbon atoms in a row with single bonds, attaching 6 hydrogen atoms, and then distributing the remaining valence electrons such that a double bond is created between the first two carbon atoms.

The Lewis structure for C3H6, also known as propene, involves a process to account for all electrons.

1. First, calculate the total amount of valence electrons. Carbon (C) has 4 valence electrons and Hydrogen (H) has 1 valence electron. So, the total valence electrons will be (3*4) + (6*1) = 18.

2. Draw the skeletal structure. Place the 3 carbon atoms in a row and connect them with single bonds. Then, attach the 6 hydrogen atoms to the carbon atoms. This initial structure will take up 8 electrons (4 bonds).

3. Distribute the remaining electrons. 10 electrons remain which form a double bond between the first and second carbon atoms, and the rest are evenly distributed to the terminal carbons, completing their octets.

4. The final Lewis structure would be H2C=CH-CH3. The first and second carbon atoms are connected by a double bond.

https://brainly.com/question/34227159

The average distance between oxygen molecules at STP is approximately 1.9 × 10^-8 cm.

What is Atomic Radius ?

Atomic radius is the distance between the nucleus of an atom and its valence electrons. It is typically measured in picometers (pm) or angstroms (Å) and is used to describe the size of an atom. The atomic radius can vary depending on the element and its electronic configuration, and can also vary in different states (ionization states, for example). The trend for atomic radius generally increases down a group on the periodic table and decreases across a period from left to right.

where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature.

The volume of one mole of gas at STP is 22.4 L according to the molar volume of a gas.

For oxygen gas (O2), the molar mass is approximately 32 g/mol. Therefore, one mole of oxygen gas contains 6.02 × 10^23 oxygen molecules.

Using the ideal gas law, we can solve for the volume of one oxygen molecule:

V = (RT/P) * (1/n)

V = (0.0821 L atm/mol K * 273 K / 1 atm) * (1 / 6.02 × 10^23 molecules)

V ≈ 4.0 × 10^-23 L

The volume of one oxygen molecule is incredibly small, so the average distance between oxygen molecules at STP is very close to zero. However, we can estimate the average distance by assuming that the molecules are arranged in a regular pattern, such as a simple cubic lattice.

In a simple cubic lattice, each oxygen molecule is surrounded by six nearest neighbors. The distance between adjacent molecules is equal to the cube root of the volume of one molecule and its six neighbors:

d = (V_molecules/6)^(1/3)

d = (4.0 × 10^-23 L / 6)^(1/3)

d ≈ 1.9 × 10^-8 cm

Therefore, the average distance between oxygen molecules at STP is approximately 1.9 × 10^-8 cm.

Learn more about Atomic Radius from given link

https://brainly.com/question/15255548

#SPJ4

Answer: It has something to do with the enthalpy

Explanation: Remember that positive enthalpy is when heat is being absorbed, which is shown in this case.

The strongest interparticle force present in the  sample of H₃PO₄ is the correct is  e. ion―dipole forces.

The intermolecular force of the attraction is the molecule H₃PO₄ that is phosphoric acid is the ion - dipole forces. The ion - dipole force is  the attractive force that will results from the electrostatic attraction in  between the ion and the neutral molecule that will have the dipole. The intermolecular force of attraction is the attractive and the repulsive forces that will arise in between the molecules of the substance.

Thus, the  H₃PO₄ that is phosphoric acid sample has the strongest ion - dipole forces of intermolecular attraction.

To learn more about force here

https://brainly.com/question/22524652

#SPJ4

The type of intramolecular force is the bond between Carbon and Oxygen in CO₂ is polar covalent bond.

A polar covalent bond is defined as a type of covalent bond in which the atoms have an unequal attraction for electrons, and so the sharing is unequal. In a polar covalent bond, which is sometimes also called as a polar bond, the distribution of electrons around the molecule is no longer symmetrical.

The type of bond present between the atoms in a molecule of CO₂ is polar covalent bond. In a molecule of carbon dioxide, a carbon atom is joined by four covalent bonds to two oxygen atoms, which have two covalent bonds each.

Learn more about polar covalent from the link given below.

https://brainly.com/question/10777799

#SPJ4

Famotidine is the name of the generic version of Pepcid, a drug used to treat gastroesophageal reflux disease (GERD).

Famotidine is a member of a group of drugs known as histamine-2 (H2) blockers, which lessen the formation of stomach acid. Famotidine can aid in the relief of GERD symptoms such heartburn, regurgitation, and difficulty swallowing by lowering the quantity of acid in the stomach. There are several different formulations of famotidine, including tablets, capsules, and oral suspension.

Famotidine is a medication that belongs to a class of drugs known as histamine-2 (H2) blockers. It is used to decrease the production of stomach acid and is commonly used to treat conditions such as gastroesophageal reflux disease (GERD), peptic ulcer disease, and Zollinger-Ellison syndrome.

It works by blocking the action of histamine, a chemical in the body that stimulates the stomach to produce acid. By reducing the amount of acid in the stomach, famotidine can help relieve the symptoms of acid reflux and ulcers, such as heartburn, indigestion, and stomach pain.

To learn more about Famotidine :

https://brainly.com/question/29428125

#SPJ4

Molarity and molality are both measures of concentration of a solute in a solution, but they are different in their units and how they are calculated.

Molarity (M) is termed as number of moles of the solute per liter of the solution. Molarity is expressed in moles per liter (mol/L) or sometimes written as "M." For example, a 1 M solution of NaCl contains 1 mole of NaCl dissolved in 1 liter of solution.

Molality (m) is termed as the number of moles of solute per kilogram of the solvent. Molality is expressed in the moles per kilogram (mol/kg). For example, a 1 mol/kg solution of NaCl contains 1 mole of NaCl dissolved in 1 kilogram of solvent (usually water).

The main difference between the molarity and the molality is that molarity is based on the volume of solution, while molality is based on mass of the solvent. This means that molarity is affected by changes in temperature and pressure, whereas molality is not.

To know more about Molarity here

https://brainly.com/question/8732513

#SPJ4

The Sulfur hexafluoride molecule, SF₆ consists six fluorine atoms with sulfur as central atom. Thus the ideal molecular geometry for SF₆ is octahedral.

Sulfur hexafluoride, or SF₆, is an inorganic greenhouse gas. It is non-flammable, odorless and colorless. In order to determine the Lewis structure of any molecule, we must first know the total number of valence electrons. Here we find the total number of valence electrons for SF₆, by adding the valence electrons for the sulfur and fluorine atoms. Total valence electrons in SF₆

= Sulfur valence electrons + Fluorine valence electrons. Total number of valence electrons in SF₆= 6 + 7×6 = 6 + 42

= 48 valence electrons

SF₆ therefore has 48 valence electrons.

Now look at the sulfur hexafluoride molecule, the sulfur is in the central position with the fluorine atoms arranged symmetrically around it. The atoms are arranged in an octahedral pattern, making the molecular geometry of SF₆ octahedral.

For more information about molecular geometry visit :

https://brainly.com/question/19354582

#SPJ4

The formula for boiling point elevation is ΔTb = i×Kb×m. Where, i is the Van't Hoff factor, Kb is the ebullioscopic constant and m is the molality of the solute.

Generally, the boiling point elevation is defined as the difference in temperature that is created between the boiling point of the pure solvent and the boiling point of the solution. Basically, on the graph, the boiling point elevation is represented by ΔTb.

Basically, the molal boiling-point elevation constant is equal to the change in the boiling point for a 1-molal solution occurs in a nonvolatile molecular solute.

Molal elevation constant can be generally defined as the elevation in boiling point which is produced when one mole of non-volatile solute is dissolved in 1 kg i.e. 1000 g of the solvent. This constant is also known as the ebullioscopic constant. Hence, the unit of molal elevation constant is K Kg mol - 1 .

Learn more about boiling point elevation from the link given below.

https://brainly.com/question/16922336

#SPJ4

When the free energy of the reaction is lower in the products than it is in the reactants, the reaction is exergonic.

An exergonic reaction is a spontaneous chemical reaction that releases energy as a result of the products having lower free energy than the reactants. This means that the reaction can occur spontaneously without the need for additional energy input. The difference in free energy between the reactants and the products determines the amount of energy that is released during the reaction. In contrast, an endergonic reaction is a non-spontaneous chemical reaction that requires energy input to occur, and the free energy of the products is higher than that of the reactants.

You can learn more about exergonic reaction at

https://brainly.com/question/1560981

#SPJ4

The bond order of N₂ is three.

Generally, bond order is described as the number of bonding pairs of electrons that is present between two atoms. Basically, between two atoms in a covalent bond, the bond order of a single bond is of one, the bond order of a double bond is of two, and the bond order of a triple bond is of three, and trend goes so on.

Mathematically,

Bond order = [Bonding molecules' number of electrons – Antibonding molecules' number of electrons] × 1/2.

Hence, bond order of both N2+ and N2- is 3, but according to the molecular orbital theory, N2- has more antibonding electrons than N2+.

Learn more about bond order from the link given below.

https://brainly.com/question/12447843

#SPJ4

The new volume of the gas sample will be 1.86 L at 288.5 K.

The volume of a gas sample can be calculated from the equation of Charles's law given below.

Where

V1 and T1 are the initial volume and temperature, and V2 and T2 are the final volume and temperature.

Rearranging the equation, we can find the final volume:

V2 = V1 * T2 / T1 = 1.95 L * 288.5 K / 301.5 K = 1.86 L

Learn more about the volume and temperature of gas at: https://brainly.com/question/17100204

#SPJ1

The correct option is (a), an area where there is a high chance of finding an electron is the nucleus of an atom.

Identified by a unique combination of four quantum numbers; identified by a unique combination of three quantum numbers. Defined by the wave function (Psi) or the square of the wave function (|Psi|²). An atomic orbital is a mathematical function that describes the probability of finding an electron at a particular location in an atom. The wave function (Psi) defines the shape of the orbital, and the square of the wave function (|Psi|²) gives the probability density of finding an electron at a particular location. The quantum numbers that identify an atomic orbital include the principal quantum number (n), the angular momentum quantum number (l), the magnetic quantum number (m), and the spin quantum number (s). The values of these quantum numbers determine the energy, shape, and orientation of the orbital. An atomic orbital does not refer to a shell in an atom containing the valence electrons, as a shell is a collection of orbitals with the same principal quantum number (n). Valence electrons are the outermost electrons in an atom and are located in the highest energy level, which may consist of one or more shells.

To know more about electron please refer: https://brainly.com/question/21306067

#SPJ4

Scientists can use spectroscopy to measure evidence that electrons can move from one energy level to another. Scientists can measure the energy added when electrons absorb energy and move to higher energy levels.

Spectroscopy is a technique that involves shining light on a material and measuring how that material absorbs or emits light at different wavelengths. When electrons move from one energy level to another, they can absorb or emit photons of light, which results in a characteristic spectral signature.

Learn more about spectroscopy on:

This situation is possible if Metal Block A has a lower specific heat capacity than Metal Block B. Specific heat capacity is the amount of heat energy required to raise the temperature of a substance by one degree Celsius per unit of mass.

Specific heat is the amount of heat energy required to raise the temperature of one unit of mass of a substance by one degree Celsius or Kelvin. It is a characteristic property of a substance and is expressed in units of J/(g·°C) or J/(g·K). Substances with a higher specific heat require more energy to raise their temperature compared to substances with a lower specific heat.

Here,

If a substance has a lower specific heat capacity, it means that it requires less heat energy to raise its temperature. So, if both blocks are made from the same substance but have different specific heat capacities, heating them for the same amount of time on the same stove would result in Metal Block A having a higher temperature than Metal Block B.

To know more about specific heat,

https://brainly.com/question/11297584

#SPJ1

Xenon difluoride (XeF₂) is a non-polar compound.

Generally covalent compounds in which there is no electronegativity difference are defined as non-polar covalent compounds. In these type of compounds, there is no change of electronegativity such that there is no motion of bond pair of electrons moving towards the bonded atoms. Non-polar compounds usually possess symmetrical polar bonds that can cancel out some sort of net dipole.

In Xenon difluoride molecule fluorine and xenon atoms generally forms two covalent bonds (Xe-F) with each other. Fluorine atom usually attracts bonded electron pair towards itself due to higher electronegativity. Then fluorine usually acquires a negative charge while xenon acquires a positive charge. And the compound becomes non-polar.

Learn more about non-polar compound from the link given below.

https://brainly.com/question/15173422

#SPJ4

The noble gas shorthand configuration for ruthenium would have Kr noble gas as its core.

Generally, the electron configuration of an element describes how electrons are distributed among its atomic orbitals. Basically, electron configurations of atoms follow a standard notation in which all electron-containing atomic subshells along with the number of electrons they hold written in superscript and are placed in a sequence.

The electronic configuration of Kr is given as,

Kr = [Ar] 3d¹⁰ 4s² 4p⁶

Hence, the atomic number of ruthenium is 44. So, the noble gas used for shorthand configuration for ruthenium is Krypton (Kr).

Therefore, the correct option is D.

Learn more about electronic configuration from the link given below.

https://brainly.com/question/29757010

#SPJ4

The molar mass of NaBr will be 102.89 g/mol.

Sodium bromide (NaBr) is a white crystalline ionic compound that is made up of sodium cations (Na⁺) and bromide anions (Br⁻). It is used in various applications, including as a sedative, in the oil industry, and in the manufacture of photographic chemicals.

The molar mass of NaBr can be calculated by adding the atomic masses of sodium (Na) and bromine (Br) in one mole of NaBr. The atomic mass of sodium is 22.99 g/mol and the atomic mass of bromine is 79.90 g/mol, as found in the periodic table.

Therefore, the molar mass of NaBr is:

Molar mass of NaBr = atomic mass of Na + atomic mass of Br

Molar mass of NaBr = 22.99 g/mol + 79.90 g/mol

Molar mass of NaBr = 102.89 g/mol

To know more about Sodium bromide here

https://brainly.com/question/15409724

#SPJ4

The mass of magnesium chloride produced in the reaction is 4.17 grams.

The balanced chemical equation for the reaction between Mg and HCl is:

Mg + 2HCl → MgCl2 + H2

To solve this problem, we need to determine which reactant is limiting and use its stoichiometry to calculate the amount of product produced.

First, we need to find the number of moles of Mg and HCl used in the reaction:

moles of Mg = 4.00 g / 24.31 g/mol = 0.1643 mol

moles of HCl = 3.20 g / 36.46 g/mol = 0.0878 mol

According to the balanced equation, the reaction uses 1 mole of Mg for every 2 moles of HCl. Therefore, Mg is in excess and HCl is the limiting reagent.

The stoichiometry of the balanced equation tells us that 2 moles of HCl produce 1 mole of MgCl2. So, the number of moles of MgCl2 produced can be calculated as:

moles of MgCl2 = 0.0878 mol HCl × (1 mol MgCl2 / 2 mol HCl) = 0.0439 mol MgCl2

Finally, we can calculate the mass of MgCl2 produced using its molar mass:

mass of MgCl2 = 0.0439 mol × 95.21 g/mol = 4.17 g

Therefore, the mass of magnesium chloride is 4.17 grams.

To know more about mass:

https://brainly.com/question/15199003

#SPJ4

The forward reaction rate constant divided by the reverse reaction rate constant is equal to the equilibrium constant.

To learn more about equilibrium refer to:

https://brainly.com/question/18849238

#SPJ4

When sulphide ore is roasted the sulphide ores generally gets converted to their respective oxides and the impurities are also oxidised and removed.

Generally roasting is defined as the process in which the mainly sulphide ores are heated below their melting point in presence of air. The sulphide ores are converted to their respective oxides and the impurities are also oxidized and removed.

During the process of roasting, the ore or the ore concentrate is treated with very hot air. Roasting is the process that is generally applied to sulfide minerals. During the process of roasting, the sulfide ore is usually converted to an oxide, and sulfur is released as sulfur dioxide, a gas.

Learn more about roasting from the link given below.

https://brainly.com/question/29280192

#SPJ4

The inverse function of c(n) would give us the number of visits n as a function of the monthly cost c.

To find the inverse function, you will have to write n in terms of c (which means number of visits as function of monthly cost). To do this, you can rearrange the equation c(n) = 50 + 4n to obtain n = (c - 50) / 4.

The value of c(7) is c = 50 + 4n = 50 + 4(7) = 78 . This means that if you spend 78 dollars on a gym every month, you will have made 7 visits in total.

Additionally, it can also be useful to find the inverse function of c(n) if you have a budget in mind but don't know how many visits you can make within that budget. In this case, you can plug your budget into the inverse function to figure out how many visits you can make with the given amount of money.

Learn more about The inverse function of c(n) :

https://brainly.com/question/21527869

#SPJ4

The chemical name for N2F4 is Dinitrogen tetrafluoride. It is also known as Tetrafluoro hydrazine.

Tetrafluoro hydrazine have the chemical formula N2F4. It is a colorless, reactive inorganic gas. It is also called as perfluoro hydrazine and is a fluorinated analog of hydrazine. This is a highly hazardous chemical that explodes in the presence of organic materials. Tetrafluoro hydrazine is manufactured from nitrogen trifluoride. It is manufactured by using an iron catalyst or iron(II) fluoride. It is used in chemical syntheses as a precursor or a catalyst. At room temperature, N2F4 is mostly associated with only 0.7% in the form of NF2. It was considered for use as a high energy liquid oxidizer. This is also called as Dinitro tetrafluoride.

To learn more about  Dinitro tetrafluoride. please visit:

https://brainly.com/question/13348005

#SPJ4

The rank according to their reactivity toward electrophilic substitution:

A) Benzene > Chlorobenzene > o-dichlorobenzene

B) Phenol Nitrobenzene > p-bromo > nitrobenzene

C) o-xylene > fluorobenzene > benzaldehyde

D) p-methoxybenzonitrile > p-methyl benzonitrile > benzonitrile

A chemical process in which an electrophile replaces a functional group on a molecule (an electron-deficient species). Typically, a hydrogen atom is the one that is replaced.

Two types of electrophilic substitution exist:

Aromatic electrophilic substitution occurs when an electrophile swaps out an atom that is connected to the aromatic ring. In this, an electrophile takes the place of a hydrogen atom that was previously attached to a benzene ring. Examples include the Friedel Craft reaction, aromatic sulphonation, and aromatic nitration.

Alkylation using electrophiles

In an aliphatic electrophilic substitution process, the functional group from the aliphatic molecule is replaced by an electrophile. Examples include diazonium coupling, halogenation of ketones, nitrosation, and keto-enol tautomerism.

The reactivity of aromatic or aliphatic compounds towards electrophilic substitution varies depending on the kind of the electron-withdrawing group linked to the component.

Step 2: Prioritizing electrophilic substitution for chlorobenzene, o-dichlorobenzene, and benzene

One Cl atom is joined to the benzene ring in chlorobenzene. Since Cl is a deactivating or electron-withdrawing group, it increases the likelihood that an electrophile may attack chlorobenzene as opposed to the unsubstituted benzene nucleus, where there is no electron-withdrawing group.

Now, two Cl groups (electron-withdrawing groups) are present in o-dichlorobenzene, which results in a greater reduction in the electron density on the ring than was the case with just one Cl in chlorobenzene. Therefore, the more a group's capacity is attached,

Benzene > Chlorobenzene > o-dichlorobenzene

Step 3: P-bromonitrobenzene, nitrobenzene, and phenol are ranked in order of preference for electrophilic substitution

In phenol, the benzene ring has a hydroxyl group (-OH) bonded to it. This -OH group raises the electron density on the ring (the activating group) due to the mesomeric effect, making it more nucleophilic and susceptible to attack by an electrophile.

In contrast, nitrobenzene has an electron-withdrawing group linked to the nitro group, which lowers the electron density at the benzene nucleus, increasing its electrophilicity and decreasing its susceptibility to attack by an electrophile.

Two deactivating groups are present in p-bromonitrobenzene, which reduces the nucleophilicity of the benzene nucleus more than a single nitro group did in nitrobenzene.

Summarizing all of this, the final ranking is as follows:

P-bromo nitrobenzene, or phenol nitrobenzene

P-bromonitrobenzene has two deactivating groups, reducing the nucleophilicity of the benzene nucleus more than nitrobenzene's single nitro group did.

In conclusion, the following is the final ranking:

Phenol Nitrobenzene > p-bromo > nitrobenzene

Step 4: Prioritizing electrophilic substitution for fluorobenzene, benzaldehyde, and o-xylene

O-xylene contains two methyl groups.

are present at positions 1, 2, and 3. As a result of the +Inductive effect (electron releasing group), methyl groups enhance the electron density at the aromatic ring, making it more nucleophilic and susceptible to assault by an electrophile.

The F, however, reduces the electron density on the benzene nucleus by the -I effect, but the -CHO group reduces via both the -Inductive effect and the mesomeric effect (prominent). Therefore, -CHO reduces the electron density at the benzene nucleus by a significantly greater amount than does F.

Consequently, the following rating will be in order:

O-xylene > Fluorobenzene > Benzaldehyde

Step 5: Prioritizing electrophilic substitution for benzonitrile, p-methylbenzonitrile, and p-methoxybenzonitrile

All of the compounds listed contain the nitrile group, which reduces the electron density on the benzene nucleus through the mesomeric and inductive effects, making the benzene less nucleophilic and more resistant to electrophile assault.

In addition to the nitrile group, p-methyl benzonitrile also contains a methyl group at the para position, which increases the electron density at benzonitrile by +Inductive effect, making it more nucleophilic.

In contrast, p-methoxybenzonitrile also contains a methoxy group at the para position, which increases benzonitrile's electron density by mesomeric effect (more prominent than inductive effect), making it the most susceptible to electro. So, the order as follows:

p-methoxybenzonitrile > p-methyl benzonitrile > benzonitrile

To learn about Electrophilic substitution with the help of given link:

https://brainly.com/question/28286554

#SPJ4

The types of the nonequivalent protons are present in each of the molecules is :

a) 4

b) 4

c) 2

The proton that is having the different environment and all the protons will give the different peaks is the non equivalent proton and if the proton will shares the same environment and all the protons will gave the same singles or the  peaks called as the  the equivalent protons.

a) 6 H will produce the same 1 signal and the 2 carbon and the 4 hydrogen will produce the 1 signal and same as the 3 carbon and the 4 hydrogen will produce the 1 signal and last 4 carbon will produce 1 signal.

b) The compound also contains the 4 non equivalent proton .

c)  The 1 signal and 1 equivalent proton and 2 will produce 1 signal so. The total 2 non equivalent proton.

To learn more about non equivalent proton here

https://brainly.com/question/30255368

#SPJ4

The statement that is not true about proteins is "Proteins are naturally acidic." Option C is correct.

Proteins are biological macromolecules made up of long chains of amino acids. They are also referred to as polypeptides because they are composed of multiple peptide bonds between the amino acids. The specific sequence and arrangement of amino acids in the polypeptide chain determine the unique 3D structure and function of the protein.

Proteins can have a structure characterized by loops, bends, and twists, and this structure is held together by a variety of intermolecular interactions, including hydrogen bonds, disulfide bonds, electrostatic interactions, and van der Waals forces.

While some amino acids have acidic or basic side chains, proteins as a whole are not necessarily naturally acidic. The overall charge of a protein is dependent on the charge of its constituent amino acids and the pH of the surrounding environment.

To know more about proteins here

https://brainly.com/question/30258984

#SPJ4

--The given question is incomplete, the complete question is

"All of the following statements are true about proteins except. -Proteins can have a structure characterized by loops, bend, and twists. A) Proteins are composed of amino acids. B) Proteins are polypeptides C) Proteins are naturally acidic. D) Hydrogen bonds keep the protein together"--

Milk is considered to be slightly acidic.

This is because it contains lactic acid, which gives it a slightly sour taste. However, it is not as acidic as substances like vinegar or lemon juice. The pH of milk is typically around 6.5-6.7, which is just below neutral on the pH scale (neutral is 7.0).
Mammary glands in mammals generate milk, a clear liquid meal. Before they can digest solid food, it serves as a young mammal's main source of nutrition. Milk immunity is a result of immune-related and immune-modulating elements.

It is important to note that the pH of milk can vary depending on factors such as the type of cow, the cow's diet, and the processing of the milk. However, in general, milk is considered to be an acid rather than a base.

To know more about Milk here:
https://brainly.com/question/30200555#

#SPJ11