Answer:
Evaporation and condensation are two processes through which matter changes from one state to another.
Explanation:
Change of state is a factor in the processes of condensation and evaporation. Evaporation refers to the transition of a substance from a liquid to a gas. Condensation describes the transition from a gas to a liquid form. They occur when molecules receive or lose energy. Heat is a form of this energy.
Why is it proposed that the work of ATP is analogous to the work of money
describe ph scale in detail
Answer:
pH is a measure of how acidic/basic water is. The range goes from 0 - 14, with 7 being neutral. pHs of less than 7 indicate acidity, whereas a pH of greater than 7 indicates a base.
When the temperature goes up, the pressure will go up.
What is the reason?
Mention a real-world example?
Explanation:
As the temperature increases, the average kinetic energy increases as does the velocity of the gas particles hitting the walls of the container. The force exerted by the particles per unit of area on the container is the pressure, so as the temperature increases the pressure must also increase.
For example, if an engineer has to store 600g of oxygen in a container and that oxygen needs to be kept at a pressure of 1 atm and a temperature of 125 degrees Fahrenheit, then this theorem (which is called Ideal Gas Law) is used to figure out what volume of a container needs to be built.
1. You have 100 ml of water. What is its mass?
Answer:
100 grams
Explanation:
According to Newton’s Third Law, if someone jumps off a skateboard, the skateboard will roll backwards because -
Answer:
for the force that sent the person forward, there is an equal force pushing back on the skateboard
why would adding water to the ester reaction mixture help us smell the ester
Answer:
A simple way of detecting the smell of the ester is to pour the mixture into some water in a small beaker. Esters are virtually insoluble in water and tend to form a thin layer on the surface. Excess acid and alcohol both dissolve and are tucked safely away under the ester laye
A chemical change occurs when one or more substances change into entirely new substances with new and different properties. true or false?
Answer:
true
Explanation:
what is substance take change everything changes
60 points please help me! i will appreciate it!
Answer:
[tex]\huge\boxed{\sf 1.51\ L}[/tex]
Explanation:
From the reaction:
2 moles of Na produce 1 mole of H₂
Converting 3.10 g of Na into moles:
Moles = mass / molar mass
= 3.10 / 23
= 0.135 mol
From the reaction:
2 Na = 1 H₂
1 Na = 1/2 H₂
1 Na = 0.5 H₂
1 mol of Na = 0.5 mol of H₂
0.135 mol of Na = 0.5 × 0.135 mol of H₂
0.135 mol of Na = 0.067 mol of H₂
So, 0.135 mol of Na (3.10 g) produce 0.067 mol of H₂
Convert 0.067 mol of H₂ into L:
= mol × molar value
[molar value = 22.4 L/mol]
= 0.067 × 22.4
= 1.51 L
[tex]\rule[225]{225}{2}[/tex]
Desmond wanted to paint his bedroom. He went to the hardware store and was shown a variety of different paint colors from which to pick. Paint is an example of which kind of product, Which is made with chemicals by humans?
Answer:
led
Explanation:
Paint is kind of synthetic chemical product.
What is paint?Paint is any colored liquid, liquefiable, or solid mastic substance that solidifies after being applied in a thin layer to a substrate.
Pigments, binders, solvents, and additives are the four major components of all paints. Binders work to "bind" the pigments together and create the paint film, while pigments offer color and conceal. Additives are substances that give certain paint features such as mildew resistance, while solvents are liquids that suspend the components and allow you to deposit the paint on the surfaces. All four elements work together to create paint that is tailored to your exact design requirements.
To know more about paint, here,
https://brainly.com/question/21147399
#SPJ2
Calculate the number of representative particles. 5.00 mol Cl2
If a spacecraft was parked on Venus and needed to make a flight to Jupiter, how far would it need to travel? Please show your work.
Answer:
If a spacecraft was parked on Venus and needed to make a flight to Jupiter, it would need to travel 670,338,270 km.
Explanation:
Jupiter - Various Properties
Jupiter Meaning:
Jupiter is the largest planet in the solar system. Fittingly, it was named after the king of the gods in Roman mythology. In a similar manner, the ancient Greeks named the planet after Zeus, the king of the Greek pantheon.
Jupiter is a gas giant that is the 5th planet from the sun. It is known as the biggest planet in the solar system. It is a very marvelous planet regarding the characteristics of the atmosphere and “surface” of the planet.The planet is a gas giant, so the whole planet that could’ve been the crust and the mantle is full of poisonous gases. Except for the core, it is full of rocky metals. The planet Jupiter has approximately 70 moons. Jupiter has a high gravitational pull, so it can easily grasp some satellites or other rocky bodies into its collection.Jupiter’s distance from the sun is 483.8 million miles.It’s orbital period is 12 earth years.Jupiter’s length of a day is 9 hours and 56 minutes.Jupiter has a radius of 43,441 miles.Has a gravity of 24.79 m/s squared.Venus - Various Properties
It's very hot. It has a thick dense atmosphere bloated with strong greenhouse gasses.Its also the second brightest celestial body when viewed from Earth due to its reflective gasses.It is also very volcanically active. From what we know now, Venus has no tectonic plates.Venus is also very similar in size to Earth.Venus Meaning:
Venus (plural veneres) is the Latin word for ‘loveliness,’ ‘beauty,’ ‘charm,’ It is derived from Proto-Italic *wenos- ('desire'). The ultimate source is the Proto-Indo-European (PIE) *wenh₁-os ('desire').
---------------------------------------------------------------------------------------------------To calculate how far the spacecraft would need to fly is to calculate the distance betwen Venus and Jupiter.
To save energy, let's consider a Hohmann transfer orbit, an ellipse tangent to opposite sides of Venus's and Jupiter's orbits. The spacecraft would follow the outbound half of this orbit, departing ahead of Venus and arriving as Jupiter overtakes it.
Depending on where in Jupiter's orbit the spacecraft meets it, this orbit has semi-major axis a = (rV + rJ) / 2 = 2.96±0.03 au and period of a3/2 = 5.10±0.08 years. The outbound half has a path length of 7.78±0.07 au and takes 2.55±0.04 years. As Jupiter moves 72° to 84° around the Sun in that time, the launch window is when Venus's heliocentric ecliptic longitude is 96° to 108° behind Jupiter's.
To convert au to km, multiply by 1.496 × 108 km / au.
---------------------------------------------------------------------------------------------------Answer:If a spacecraft was parked on Venus and needed to make a flight to Jupiter, it would need to travel 670,338,270 km.
Answer:
If a spacecraft was parked on Venus and needed to make a flight to Jupiter, it would need to travel 670,338,270 km.
Explanation:
how do you do this
A regulation NBA basketball has a radius of 12 cm when inflated properly. What is the volume of an inflated basketball in cm^3?
someone help lol
Answer:
The volume of basketball is 7216.5 cm³.
Explanation:
Given data:
Radius of ball = 12 cm
Volume of ball = ?
Solution:
We will apply the volume formula of sphere.
V = 4/3 ×π×r³
we know that,
π = 22/7
r = 12 cm
Now we will put the values in formula.
V = 4/3 × 3.14 × (12 cm)³
V = 4/3 × 3.14 ×1728 cm³
V = 7216.5 cm³
Thus, the volume of basketball is 7216.5 cm³.
what size volumetric flask would be useful in diluting 100 ml of a 3.0 m solution of sucrose to make a 0.60 m solution. dilutions worksheet answers
The size of volumetric flask that would be useful in diluting 100 ml of a 3.0 M solution of sucrose to make a 0.60M solution is 500mL.
How to calculate volume?The volume of a solution can be calculated by using the following expression;
C1V1 = C2V2
Where;
C1 = initial concentrationC2 = final concentrationV1 = initial volumeV2 = final volume3 × 100 = V2 × 0.60
300 = 0.6V2
V2 = 300 ÷ 0.6
V2 = 500mL
Therefore, the size of volumetric flask that would be useful in diluting 100 ml of a 3.0 M solution of sucrose to make a 0.60M solution is 500mL.
Learn more about volume at: https://brainly.com/question/12127540
ANSWER THIS QUICKLY FOR BRAINLIEST!!
Answer:
do good
Explanation:
do good
How many methane molecules could form from these reactants? limiting reactants gizmo answers
Answer:
Explanation:not
What is the benefit of having a detailed procedure to follow
Answer:
see answer below
Explanation:
LOL idk what this question is about but to my understanding, having a detailed procedure gives u more clue on what u r doing and how u r doing it. think of this like a instruction manual, if u want to build a telescope and have no idea how to build it and the instrutions only give u short sentences like"screw nails next to the finger scope" or something like that wouldnt help much. i dont know about u but i rather prefer instructions written like this"first screw the nail beside the finger scope, DO NOT unscrew the botton" and continue. i cant build a telescope so yea dont know any directions to that.
Compare and contrast the concepts of average mass and relative mass. Which one is more accurate, and why? Why is the one you did not choose inaccurate?
Answer:
Relative and average atomic mass both describe properties of an element related to its different isotopes.
Explanation:However, relative atomic mass is a standardized number that's assumed to be correct under most circumstances, while average atomic mass is only true for a specific sample.
Relative and average atomic mass both describe properties of an element related to its different isotopes. Out of these two Relative atomic mas is more accurate.
What is mass?Mass defines the quantity of a substance. It is measured in gram or kilogram. Average mass is the mass of atoms of an element that are isotopes. It can be calculated by multiplying mass of a isotope to natural abundance of that isotope.
The relative mass is the mass that is with respect to mass of a matter that is considered as standard. In chemistry relative mass is equal to the mass of one-twelfth the mass of [tex]C-12[/tex] isotope .
Out of relative and average atomic mass, relative atomic mass is more accurate as it is calculated with respect to a standard quantity.
Thus Relative atomic mass is more accurate than average atomic mass.
To learn more about mass, here:
https://brainly.com/question/28704035
#SPJ2
Relative and average atomic mass both describe properties of an element related to its different isotopes.
Explanation: However, relative atomic mass is a standardized number that's assumed to be correct under most circumstances, while average atomic mass is only true for a specific sample.
Does tilt of earths axis of rotation influence climate
Answer:
The greater Earth's axial tilt angle, the more extreme our seasons are, as each hemisphere receives more solar radiation during its summer
Explanation:
name some compounds with their colours pls help.
Explanation:
manganese(11)
chloride =color pink
tetrahydate
copper(11)
chloride =color blue green
dihydrate
nickel(11)
chloride =color green
hexahydrate
Answer:
Explanation:
Iron(II) sulphate crystals are green.
Solid Ferric, ( Fe(III) chloride is brown.
Copper Sulphate is blue.
Calcium Sulphate is white.
Barium Sulphate is white.
please help will mark brainliest
1) what proccess can be used to extract pure water from salt water ?
2) how is an element different to a compound
Answer:
1= simple distillation
2 - elements contain just one type of atom ; compounds contain atoms of at least two different elements , which have been chemically combined or bonded
Explanation:
hope this helps
Answer:
chromotragraphy
because it has mixture of compounds and elements
i think these are the answers
Explanation:
what is the volume of an object with a mass of 31g and density of 444g/ml
Answer:
The answer is 0.07 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question
mass = 31 g
density = 444 g/mL
We have
[tex]volume = \frac{31}{444} \\ = 0.06981...[/tex]
We have the final answer as
0.07 mLHope this helps you
The greater in ecosystems blank the more likely it is that some organisms could survive caster traffic environmental changes
Answer:
The answer is species diversity
Explanation:
Hope this helps:)......if not then sorry for wasting your time and may God bless you:)
What are two different ways that electrons can become excited
Absorbing light and through collisions
describe what makes a diamond a mineral
Answer:
isn't diamond made from black coal? haha... just kidding. se the answer below
Explanation:
Diamond is a rare, naturally occurring mineral composed of carbon. Each carbon atom in a diamond is surrounded by four other carbon atoms and connected to them by strong covalent bonds - the strongest type of chemical bond.Diamond is the hardest known natural substance.
I hope I helped.
Describe the structure of DNA.
Answer:
DNA is made up of two strands of nucleotides. The nucleotides are made up of a sugar (deoxyribose in DNA), a phosphate, and a nitrogen base. The sugars and phosphates make up the "handrails" (or "backbone"), and are held together by covalent bonds.
Explanation:
12.09 kcal of energy is added to 45 grams of water at an initial temperature of
23.4°C. What is the final temperature of the water?
For 12.09 kcal of energy, added to 45 grams of water at an initial temperature of 23.4°C, the final temperature of the water is mathematically given as
T2=290C
What is the final temperature of the water?Generally, the equation for the Energy is mathematically given as
Q=mcdT
Therefore
Q=mcdT
12.09=45*(23.4-T2)
T2=290C
In conclusion, the final temperature is
T2=290C
Read more about Temperature
https://brainly.com/question/13439286
2. Which have a positive charge?
O atoms
O protons
O neutrons
O electrons
Answer:
protons
Explanation:
have a positive charge
Answer:
Protons!
Explanation:
Protons are positve! Protons start with P, and Positive starts with P. This is a very handy trick!
why are atoms attracted to each other in an ionic bond?
Answer:
The answer is C. Inversely, when this atom gains a positively charged ion. (The atom) becomes a negatively charged atom or an "anion".
Explanation:
Since electrons are negatively charged, an atom that loses one or more electrons will become positively charged, an atom that gains one or more electrons becomes negatively charged. The oppositely charged ions attract each other to form ionic networks (or lattices)
Answer:
opposite charges attract
Explanation: Ionic bonding is the attraction between positive and negative charge ions electrostatics explains why this happens: opposite charges attract and like charges repel. when many ions attract each other, they form large, ordered, crystal lattices in which each ion is surrounded by ions of the opposite charge. Happy to help my friend
List in order which digits are significant in the following numbers:
a. 230 mL.
b. 0.00540 s
c. 1440
d. 50 ℃
e. 0.9405 g/cm3
f. 700 jellybeans
g. 1.05 x 106
Answer: see below
Explanation:
Zeros between the digit and decimal point are NOT significant.
Zeros between digits ARE significant.
a. 230 mL. sf: 23
b. 0.00540 s sf: 540
c. 1440 sf: 144
d. 50 ℃ sf: 5
e. 0.9405 g/cm3 sf: 9405
f. 700 jellybeans sf: 7
g. 1.05 x 10⁶ sf: 105
please help Why can we listen to radio or watch TV indoors?
A. It will work as long as the room has hardwood.
B. Walls absorb most of the incoming waves
C. It will work as long as the room is carpeted.
D. Walls don’t absorb the incoming waves
Answer:
D
Explanation:
A: not true. You could have cement floors and still receive radio/TV
B: not true. Very little of the waves are absorbed by the walls.
C: not true. You can receive radio/TV if there isn't a carpet in the entire house.
D: Dis the answer. Walls don't absorb the incoming waves or not much of them