find the gradients of esm n with respect to w(1) and w(2). (note that you should always consider two possible values of yn).

True sampling distribution sample which is proportion to be approximately normal is "Both np and n(1 P) are at least 10".

For the sampling distribution of the sample proportion to be approximately normal, the sample size must be sufficiently large, and the sample proportion must be neither too small nor too large.

Specifically, the sample size multiplied by the sample proportion (np) and the sample size multiplied by one minus the sample proportion (n(1-P)) must both be at least 10. This is known as the "success-failure" condition.

Option b is not entirely accurate, as a sample size greater than 30 is a rule of thumb for the Central Limit Theorem to apply, but it is not a strict requirement for normality.

Option c is incorrect as a sample proportion greater than 0.5 means the distribution is skewed towards one end and not normal.

Option d and e are the mean and variance of the binomial distribution and are not directly related to normality.

The correct answer is option a. Both np and n(1-P) are at least 10.

For a similar question on success-failure" condition

https://brainly.com/question/15119127

#SPJ4

Now we can find the area:

Area = length x width

Area = (19/4) x 6

Area = 114/4

Area = 28.5

Therefore, the area of the picture is 28.5 square inches.

The area of a planar figure is the region that its perimeter includes. The quantity of unit squares that completely encircle the surface of a closed figure is its area. Square units like cm2 and m2 are used to measure area.

The area of a rectangle is found by multiplying its length by its width. In this case, the width is 6 inches and the length is 4 3/4 inches. We can convert the length to an improper fraction to make it easier to multiply:

4 3/4 = 19/4

Now we can find the area:

Area = length x width

Area = (19/4) x 6

Area = 114/4

Area = 28.5

Therefore, the area of the picture is 28.5 square inches.

To know more about area visit:

https://brainly.com/question/27683633

#SPJ1

The area of the rectangular picture painted by Tamara is 28.5 in.²

What is a rectangle?

The internal angles of a rectangle, which has four sides, are all precisely 90 degrees. The two sides come together at a straight angle at each corner or vertex. The rectangle differs from a square because its two opposite sides are of equal length. Rectangles are flat, two-dimensional shapes. The diagonals of the rectangle's symmetrical shape are of equal length. The rectangle will be split into two right-angle triangles by a diagonal.

The region covered by a two-dimensional plane is known as its area. It has a square unit of measurement. As a result, the rectangle's area is the space enclosed by its exterior lines. It is the same as the length times the width calculation.

Given,

  The width of the rectangular picture = 6 inches

The length of the rectangular picture = 4 3/4 inches = 19/4 inches

The area of the picture = Area of the rectangle = Length * breadth

                                                                      = 19/4 * 6 = 57/2 = 28.5 in.²

Therefore the area of the rectangular picture painted by Tamara is

28.5 in.²

To learn more about rectangles, follow the link.

https://brainly.com/question/25292087

#SPJ1

Pixel size for fast spin echo is 0.94mm x 0.94mm. FOV 30cm, TR 600, TE 10, 320x320 matrix, 4NEX, 3mm slice thickness, 3ETL.

To calculate the pixel size, we first need to convert the FOV from 30cm to 300mm. We can then divide the FOV by the matrix size (320 x 320) to get the pixel size. This will give the same value for both the phase dimension and frequency dimension pixels. So the pixel size for the fast spin echo sequence is 0.94mm x 0.94mm.

The other parameters for the sequence are TR 600, TE 10, 4NEX, 3mm slice thickness and 3ETL. These parameters will determine the type of sequence and the overall image quality. With these parameters, the fast spin echo sequence should produce a high quality image with good resolution.

Learn more about matrix here

https://brainly.com/question/28180105

#SPJ4

Solution in da attachment!! :)

The supplement of angles 2.68, 2.79, 1.79, 2.04, 0.34 are 1.32, 1.21, 1.21, 1.96, 2.66 radians respectively.

The supplement of an angle is defined as the difference between π radians (180 degrees) and the given angle. If the measure of an angle is "x" radians, then its supplement is calculated as π - x radians.

The supplement of an angle represents the smallest angle that when added to the original angle.

Supplement of 2.68 radians: π - 2.68 = 1.32 radians

Supplement of 2.79 radians: π - 2.79 = 1.21 radians

Supplement of 1.79 radians: π - 1.79 = 1.21 radians

Supplement of 2.04 radians: π - 2.04 = 1.96 radians

Supplement of 0.34 radians: π - 0.34 = 2.66 radians

To know more about supplement of an angle:

https://brainly.com/question/25889161

#SPJ4

___________The given question is incomplete, the complete question is given below:

find the supplement of each of the following angles measured in radians: 2.68 is supplementary to_____, 2.79 is supplementary to_____, 1.79 is supplementary to_______, 2.04 is supplementary to______, 0.34 is supplementary to_______.

No, there is no outlier. this means that the people are all the same age

No, there isn't an outlier. This indicates that everyone is roughly the same age.

What is an Outlier?

An outlier in a data graph or dataset you're dealing with is a data point that is disproportionately high or low compared to the closest data point and the rest of the nearby coexisting values.

Extreme values that significantly deviate from the dataset for graph's normal distribution are known as outliers.

How to Spot the Outlier?

Data points in a dataset must be fewer than Q1 - 1.5xIQR in order to qualify as low outliers.

As a result, a data point cannot be regarded as a low outlier unless it falls below the first quartile by more than 1.5 times the interquartile range.

To know more about Outliers visit:

https://brainly.com/question/29127247

#SPJ1

The error of Improved Euler's Method is that it underestimates the true solution of the differential equation, leading to an inaccurate result.

Improved Euler's Method is used to approximate the solution to a differential equation. The method begins by using the initial value of the function, as well as its derivative at that point. The derivative is then multiplied by a step size, h, and added to the initial value to obtain an estimate of the function at the next point. This estimate is used to calculate the derivative at the new point, which is then multiplied by the same step size and added to the initial value to obtain the next estimate. This process is repeated until the desired solution is obtained. The error of Improved Euler's Method is that it underestimates the true solution of the differential equation, leading to an inaccurate result.

Learn more about equation here

https://brainly.com/question/649785

#SPJ4

Answer:

Step-by-step explanation:

[tex]\sqrt{6} * \sqrt{3}\\ \sqrt{18}, 18=9*2, \\ \sqrt{9*2}, \\ \sqrt{9*2} = \sqrt{9} * \sqrt{2}, \sqrt{9}=3\\ 3 \sqrt{2}[/tex]

B.

The probability of getting more than 5 questions right in the quiz is

0.00011445.

Probability is simply how likely something is to happen. Whenever we're unsure about the outcome of an event, we can talk about the probabilities of certain outcomes—how likely they are.

the probability of guessing right on a 4-option multiple choice item is= 1/4

= 0.25

A quiz contains 10 questions.

now, the probability of getting 5 right answers as below,

Required Probability = P(X = 6) + P(X = 7) + P(X = 8) + P(X = 9) + P(X = 10)

so, this is the probability to come right answers,

Required Probability  = (1/4)^6 (3/4)^4 + (1/4)^7 (3/4)^3 + (1/4)^8 (3/4)^2 + (1/4)^9 (3/4)^1 + (1/4)^10

Required Probability = 0.000077 + 0.000025 + 0.0000086 + 0.0000029 + 0.00000095

after adding all values we get the required probability,

Required Probability = 0.00011445.

Learn more about probability here :-

https://brainly.com/question/11234923

#SPJ4

the complete and correct question is ,

the probability of guessing right on a 4-option multiple choice item is 1/4 or 0.25. a quiz contains 10 questions. find the probability of getting more than 5 right.

The plan which generate the most interest after three years is 5.0% compounded semi-annually, the correct option is A

If the initial amount (also called as principal amount) is P, and the interest rate is R% per unit time, and it is left for T unit of time for that compound interest, then the interest amount earned is given by:

[tex]CI = P\left(1 +\dfrac{R}{100}\right)^T - P[/tex]

The final amount becomes:

[tex]A = CI + P\\A = P\left(1 +\dfrac{R}{100}\right)^T[/tex]

Given that;

The amount of investment= $4,500

Now,

The amount with rate of 5.0% compounded semi-annually;

The final balance is ₹5,218.62.

The total compound interest is ₹718.62.

The amount with rate of 4.9% compounded quarterly;

The final balance is ₹5,207.94.

The total compound interest is ₹707.94.

The amount with rate of 4.8% compounded monthly;

The final balance is ₹5,195.49.

The total compound interest is ₹695.49.

The amount with rate of 5.1% compounded yearly;

The final balance is ₹5,209.31.

The total compound interest is ₹709.31.

Therefore, maximum compound interest will be of 5% semi annually.

Learn more about compound interest here:

https://brainly.com/question/11897800

#SPJ9

The solution is,  the value at the 75th percentiles for the data set is 17.

In statistics, a k-th percentile is a score below which a given percentage k of scores in its frequency distribution falls or a score at or below which a given percentage falls.

here, we have,

The 75th percentile of the data is the value which is greater than 75% of the data. Arranging the values first in ascending order:

given that,

3 4 5 5 6 7 8 10 11 11 12 16 16 16 17 18 20 20 20 22

The data has 20 elements, so 75% of the data consists of .75(20) = 15.

The 75th percentile must be the 15th element.

Therefore, 17.

To learn more on percentile click:

https://brainly.com/question/2141926

#SPJ9

Answer:

t = 9

Step-by-step explanation:

We know that 1/3 of t is 3, so to find t, we have to multiply 3 x 3 because we want to find 3/3 or 1 of t. When we multiply 3 x 3, we get t = 9

OR

We could also solve it like this-

1/3 × t = 3

1/3 goes to the other side so it becomes: [tex]t = \frac{3}{1/3} \\[/tex]

Then, it become multiplication so: [tex]t = 3 * 3/1[/tex]

So t is 9

Hope this helps!

The function g(x) is a quadratic function in vertex form. Its vertex is at (3, 9), and it opens upwards because the coefficient of the squared term is positive.

The function f(x) is also a quadratic function, but in standard form. It opens upwards because the coefficient of the squared term is positive.

Since both functions have a minimum value at the vertex, the graphs of g(x) and f(x) will be similar in shape. However, the vertex of f(x) is at (0,0), so it is shifted to the left of g(x). Also, the y-intercept of f(x) is (0,0), while the y-intercept of g(x) is (0,18).

In summary, the graph of g(x) is the graph of f(x) shifted 3 units to the right and 9 units up.

The hydronium ion concentration in orange juice with pH 3.5 is 3.16 × 10⁻⁴

The hydronium ion is an important factor when dealing with chemical reactions that occur in aqueous solutions. Its concentration relative to hydroxide is a direct measure of the pH of a solution. It can be formed when an acid is present in water or simply in pure water.

Given that, the pH level, P, of a liquid can be determined from the hydronium ion (H3O+) concentration, c, using the equation P = –log(c). we need to determine the hydronium ion concentration in orange juice with pH level of 3.5

Therefore,

P = -log(c)

P = 3.5

Therefore,

3.5 = -log(c)

log(c) = -3.5

(10)⁻³⁵/₁₀ = c

c = 0.000316227766

c = 3.16 × 10⁻⁴

Hence, the hydronium ion concentration in orange juice with pH 3.5 is 3.16 × 10⁻⁴

Learn more about hydronium ion concentration, click;

https://brainly.com/question/13387755

#SPJ1

The median for the distribution table is falls within the range of 60-70 points.

Understanding the concept of median is crucial in analyzing data and making statistical inferences.

From the given distribution table, we can see that the percentage of students scoring between 0-60 points is 15%, between 60-70 points is 10%, between 70-80 points is 25%, between 80-90 points is 30%, and between 90-100 points is 20%. To calculate the cumulative percentage, we can add up the percentages from left to right.

For instance, the cumulative percentage of students scoring between 0-70 points is

=> 15% + 10% = 25%.

Similarly, the cumulative percentage of students scoring between 0-80 points is

=> 15% + 10% + 25% = 50%.

We can repeat this process to find the cumulative percentage for each score range.

Once we have the cumulative percentages, we can find the median score. In this case, since the total percentage is 100%, the median score would be the point at which the cumulative percentage reaches 50%. We can use the height column to calculate this value.

Starting from the lowest score range, we can add the heights until the cumulative percentage exceeds 50%. The point where this happens is the median score.

Moving on to the next score range, the cumulative percentage for scores between 0-70 points is 25%, which is greater than 50%. Therefore, the median score falls within the range of 60-70 points.

To know more about distribution here.

https://brainly.com/question/29062095

#SPJ4

Complete Question:

A distribution table for the scores on an exam is shown below. The second row says that 10% of the students scored between 60 and 70. Fill in the blanks in the height column. Do not include units.

Points (Width) % 0-60  60-70 70-80 80-90 90-100

(Area) Height=Area/Width (% per point)  15  10  25 30  20

What is the median score?

The distribution used to obtain the critical value in this situation is the Student's t-distribution.

Critical value is a statistical value used to determine whether a hypothesis test result is statistically significant or not. It is the value that is compared to the test statistic to determine whether the null hypothesis should be rejected or not. The critical value is determined by the level of significance chosen for the study, the sampling distribution of the test statistic, and the degrees of freedom.

The Student's t-distribution is a symmetric probability distribution that is used when the population standard deviation is unknown. It is used in situations where there is a small sample size (less than 30) and the sample is drawn from a normally distributed population. In this case, the owner is interested in developing a 90% confidence interval estimate, so the critical value will be obtained from the Student's t-distribution.

To know more about critical value, click

brainly.com/question/24281057

#SPJ1

The probability that Machine A filled a randomly selected bottle, given that it is defective, is 2/3 or approximately 0.67.

Let's define the subsequent events:

A: Machine A filled the bottle.

A': The bottle wasn't mechanically filled A (i.e. filled by machine AC).

D: the bottle is defective.

The chance that a randomly selected bottle was filled by machine A, assuming that it is broken, is known as P(A|D). The Bayes theorem provides us with:

P(A|D) = P(D|A)P(A) / P(D)

The following three terms on the right-hand side must be calculated:

P(D|A): the probability that a bottle is flawed given that machine A filled it. 10% of the bottles filled by machine A are reported to be faulty. so P(D|A) = 0.1.

P(A): the previous probability that machine A filled a bottle. There are just two machines, both of which fill bottles., P(A) = P(A') = 0.5.

P(D): the slight possibility that a bottle is flawed. The law of total probability can be used to calculate this:

P(D) = P(D|A)P(A) + P(D|A')P(A') = 0.1 x 0.5 + 0.05 x 0.5 = 0.075

Now we can plug in the values:

P(A|D) = 0.1 x 0.5 / 0.075 = 2/3

Therefore, the probability that Machine A filled a randomly selected bottle, given that it is defective, is 2/3 or approximately 0.67.

To learn more about Bayes theorem, visit the link below:

https://brainly.com/question/17010130

#SPJ4

The correct statement regarding the test of the hypothesis is given as follows:

B. The p-value is less than the significance level, and the null hypothesis is rejected. There is convincing evidence to suggest the true proportion of stitching defects is not 0.08.

Depends on if the p-value is less or more than the significance level:

The parameters for this problem are given as follows:

Hence the null hypothesis is rejected, as 0.03 < 0.05, and the conclusion is that the proportion is different of 0.08, which is the test made for this problem.

More can be learned about the test of an hypothesis at https://brainly.com/question/15980493

#SPJ1

Answer:

yes

Step-by-step explanation:

Given ab 12 ac 6 prove c is the midpoint is true because the midpoint of 12 is 6.

What is the slope of the budget line if the slope of the budget line equals the slope of the indifference curve when consumer equilibrium is taken into account on an indifference curve/budget line diagram

A client selects a group of items where an indifference curve is perpendicular to the price range line in order to optimize utility. The fee ratio of the two things is the same as the client's marginal charge of substitution (absolutely the cost of the slope of the indifference curve) at the utility-maximizing solution. The marginal charge of substitution is the indifference curve's slope (MRS). The MRS is the price at which a client will often trade one fact for another.

Learn more about the budget here:

brainly.com/question/24940564

#SPJ1

Donald  has a higher three-game series score.

In statistics, the standard score is the number of standard deviations by which the value of a raw score is above or below the mean value of what is being observed or measured. Raw scores above the mean have positive standard scores, while those below the mean have negative standard scores.

here, we have,

Given that :

BRUCE :

score (x) = 500

League average (m) = 620

Standard deviation (σ) = 20

DONALD:

score (x) = 520

League average (m) = 625

Standard deviation (σ) = 25

Take standardized score of both Bruce and Donald

BRUCE:

Zscore = (x - m) / σ

Zscore = (500 - 620) / 20

Zscore = - 120 / 20

Zscore = - 6

DONALD:

Zscore = (x - m) / σ

Zscore = (520 - 625) / 25

Zscore = - 105 / 25

Zscore = - 4.2

Bruce's standardized score is lesser Than Donald's.

Hence, Donald has a higher three-game series score.

To learn more on Z-score click:

https://brainly.com/question/18558246

#SPJ1

Answer:

2 5/8 kg

Step-by-step explanation:

To find the total mass of the 3 parcels, we need to determine the mass of Parcel A and Parcel C.Since Parcel B is the lightest, with a mass of 3/8 kg, and the difference in mass between Parcel A and Parcel C is 1/5 kg, we can say that Parcel A weighs 3/8 + 1/5 = 4/8 = 1/2 kg more than Parcel C.Let's call the mass of Parcel C "x". Then, Parcel A weighs x + 1/2 kg.The total mass of the 3 parcels can be found by adding the masses of all 3 parcels:x + x + 1/2 + 3/8 = 3x + 9/83x = 3 - 9/83x = 27/8 - 9/83x = 18/8x = 6/8 = 3/4 kgSo, the mass of Parcel C is 3/4 kg, the mass of Parcel A is 3/4 + 1/2 = 1 1/4 kg, and the total mass of the 3 parcels is 3/4 + 1 1/4 + 3/8 = 2 5/8 kg.In conclusion, the total mass of the 3 parcels is 2 5/8 kg.

Answer:

accounting is a systematic and detailed recording of all the financial transactions that further help owners, investors, suppliers, etc. in making the right business decision.

Step-by-step explanation:

Answer:

The expression 6x^2 + x − 1 is a quadratic trinomial.

Step-by-step explanation:

The area and perimeter of 2D shape of Rectangle is 6.8448cm and 11.04cm repectively. The area and perimeter of 2D shape of circle is 5.0761cm and 8.0028cm respectively.

2D shape of Rectangle with dimensions of Length is3.72 cm and Width is 1.84 cm. we can find the area of rectangle with formula Area = length x width and the formula of perimeter is Perimeter = 2(length + width).

Area = length x width = 3.72 cm x 1.84 cm = 6.8448 square cm (rounded to four decimal places)

Perimeter = 2(length + width) = 2(3.72 cm + 1.84 cm) = 11.04 cm

2D shape of Circle with dimension of diameter of 2.54 cm. we can find the area with formula Area = πr^2 and circumference with formula Circumference = 2πr

Radius = diameter / 2 = 2.54 cm / 2 = 1.27 cm

Area = πr^2 = π(1.27 cm)^2 = 5.0761 square cm (rounded to four decimal places)

Circumference = 2πr = 2π(1.27 cm) = 8.0028 cm (rounded to four decimal places)

To know more about 2D shapes.

https://brainly.com/question/18719120

#SPJ4

____The given question is incomplete, the complete question is given below:

Calculating area and circumference or perimeter of a 2D shape. Use your measurements to calculate the area and circumference of the circle and to calculate the area and perimeter of the rectangle. Rectangle Length: 3.72 cm Width: 1.84 cm  Circle : 2.54 cm Diameter of circle

Answer:

I will tell you the answer

Step-by-step explanation:

Answer:

the median is 11 questions.

Step-by-step explanation:

khan academy :)

The percentage decrease in the score is 1.8%

Juan earned 166 points on a school assignment

The assignment was turned in late which made the score to be reduced to 163 point

The first step is to calculate the decrease

= 166-163

= 3

The percentage decrease is

3/166 × 100

= 0.0180 × 100

= 1.8

Hence the percentage decrease in the score is 1.8%

Read more on percentage decrease here

https://brainly.com/question/29282810

#SPJ1

The number of solution of each of the equations -2x + 4 = 4 - 2x, 5 - 3x = -5 - 3x and 2 + 3x = 2 + 2x are infinite solution, no solution and one solution respectively.

Given the equations in the question;

a) -2x + 4 = 4 - 2x

b) 5 - 3x = -5 - 3x

c) 2 + 3x = 2 + 2x

To determine the number of solutions of each equation, solve for x.

a)

-2x + 4 = 4 - 2x

Solve for x

-2x + 2x + 4 - 4 = 4 - 4 - 2x + 2x

-2x + 2x = 4 - 4

0 = 0

Hence, the equation has infinite solutions.

b)

5 - 3x = -5 - 3x

Solve for x

5  - 5 - 3x + 3x = -5 - 5 - 3x + 3x

- 3x + 3x = -5 - 5

0 =  -10

Hence, the equation has no solution.

c)

2 + 3x = 2 + 2x

Solve for x

2 - 2 + 3x - 2x  = 2 - 2 + 2x - 2x

3x - 2x  = 2 - 2

x = 0

Hence, the equation has one solution.

Learn to solve more equations here: https://brainly.com/question/9236233

#SPJ1

The value of f( -10 ) in the piecewise function is 150.

A piecewise function is simply a function which has different definitions of values for different intervals.

Given the piecewise function;

         t² - 5t; t ≤ -10

f(t) = { t + 19; -10 < t < -2

         t³/( t + 9 ); t ≥ -2

To solve for f( -10 ), we check the interval where -10 falls into.

Since -10 is less than or equal to -10, it falls in the interval of t ≤ -10.

Hence;

f(t) =  t² - 5t

Replace t with -10 and simplify.

f( -10 ) =  ( -10 )² - 5( -10 )

f( -10 ) =  100 + 50

f( -10 ) =  150

Therefore, the value of f( -10 ) is 150.

Learn more about piecewise function here: brainly.com/question/30605767

#SPJ1