Answer:
Explanation:
Invest in a reusable water bottle. ...
Bring your own reusable cup. ...
Refuse single-use items. ...
Avoid products with microbeads. ...
Shop in bulk
depression what are the effects to the brain
In the reaction 2 H, Ł02 → 2 H, O, what is the mole ratio of hydrogen to water?
A 2:2
B 2:1
C 1:2
D 4:4
A
because both have 2's in front of them
120 L of C3H8 is how many grams?
Answer:
44.09562 grams
Explanation:
What is h+ concentration associated with a pH=10.2
A. 10.9
B. 6.3*10^-11
C. 3.1
D. 3.2 * 10^-3
Answer:
6.3*10^-11
no reasoning i just know thats the answer you dont have to trust me.
The force of gravity can act between two people.
True or false??
What is the atomic number for an element with 41 neurons and a mass number of 80
Answer:
92.9 I think not sure but hope this helps
i What
What is ment by
ment by covalency?
what happens when ?? Fresh red flower is introduced into a vessel contain Sulphur dioxide along
with moisture.
A 23.8 mL sample of HCl of unknown concentration is neutralized by 5.45 mL of 0.331 M Ca(OH)2. What is the concentration of the HCl solution?
(The answer is 0.152, but I need an explanation/steps to get that answer)
Which of the following is a homogeneous mixture ?A.pizza B.oxygen
C.tea
D .pure water
I think it would be d bc water is everywhere
What is the total number of nitrogen atoms in two mol of NH4NO3?
Answer:
the answer is B if one mol contains of NH4NO3 contains 6.02X 10^23
Match the function to the part of the cell.
1.lysosome
A.serves as a temporary storage area for nutrients and waste materials
2.vacuole
B.breaks down waste materials
3.chloroplast
C.converts energy from the sun to food energy
Answer: Chloroplast: Converts energy from the sun to food energy
Answer: Vacuole: Servers as a temporary storage area for nutrients and waster materials.
Answer: Lysosome: Breaks down waste materials
Explanation: Dude above me is wrong
A student places 2 mL of 2% ethanolic silver nitrate solution into test tube. They add 2 drops of an unknown compound into the test tube while gently mixing. After five minutes, the student heated the test tube in a water bath and a white precipitate formed. They added 2 drops of 1 M nitric acid to the mixture which was cooled to room temperature and still noticed the precipitate did not dissolve in response to the nitric acid. What compound is most likely the unknown
Answer:
hi
Explanation:
i am smart but i need this app cuz some are realy hard
An FCC iron-carbon alloy initially containing 0.20 wt% C is carburized at an elevated temperature and in an atmosphere wherein the surface carbon concentration is maintained at 1.0 wt%. If after 51 h the concentration of carbon is 0.35 wt% at a position 3.9 mm below the surface, determine the temperature at which the treatment was carried out. You will need to use data in the two tables below to solve this problem.
Answer:
Explanation:
[tex]\text{From the information given:}[/tex]
[tex]C_o = 0.20 \ wt\% \\ \\ C_s = 1 \ wt\% \\ \\ t = 51 \ h \\ \\ x = 3.9 \ mm \\ \\ C_x = 0.35 \ wt\%[/tex]
[tex]\text{Using Fick's 2{nd} \ law \ of \ diffusion;} \\ \\ \dfrac{C_x- C_o}{C_s-C_o}= 1 - erf ( \dfrac{x}{2\sqrt{Dt}})[/tex]
[tex]\dfrac{0.35-0.20}{1-0.20}= 1 - erf ( \dfrac{x}{2\sqrt{Dt}})[/tex]
[tex]0.1875 = 1 - erf ( \dfrac{x}{2\sqrt{DT}}) \\ \\ erf ( \dfrac{x}{2\sqrt{DT}}) = 1 - 0.1875 \\ \\ erf ( \dfrac{x}{2\sqrt{DT}}) = 0.8125[/tex]
[tex]\text{To find the value of Z by Obtaining Data from Tabulation of Error Function}[/tex] [tex]\text{Table Values:}[/tex]
Z erf(z)
0.90 → 0.7970
0.95 → 0.8209
? → 0.8225
∴
[tex]\dfrac{z-0.90}{0.95-0.90}= \dfrac{0.8125-0.7970}{0.8209-0.7970}[/tex]
[tex]\dfrac{z-0.90}{0.05}= \dfrac{0.0155}{0.0239}[/tex]
[tex]z = 0.9324[/tex]
[tex]\text{To determine the diffusion coefficient;}[/tex]
[tex]erf (0.9324) = 0.8125 = erf (\dfrac{x}{2\sqrt{Dt}}) \\ \\[/tex]
[tex]\dfrac{x}{2 \sqrt{Dt}}= 0.9324 \\ \\ \dfrac{3.9 \times 10^{-3}}{2 \times \sqrt{D\times 51 \times 3600}} = 0.92324 \\ \\ \sqrt{D} = 4.88 \times 10^{-6} \\ \\ D = \sqrt{4.88 \times 10^{-6}} \\ \\ D = 2.38 \times 10^{-11} \ m^2 /s[/tex]
How does pollution affect Earth Systems.
ILL GIVE BRAINLIEST!!!!!!
Answer:
pollution causes smog
Smoke fog, or smog for short, is a type of intense air pollution.
it makes GHG wich is greenhouse gas and it makes the smog to stay inside the earth wich heats the Earth and it causes flood, storm, tornadoes, ect.
2C2H2 + 502 = 4CO2 + 2H20
when 20000g of 2C2H2 + 5O2 = how much 4CO2?
Answer:
6.761 × 10⁴ g
Explanation:
Step 1: Write the balanced combustion reaction
2 C₂H₂ + 5 O₂ ⇒ 4 CO₂ + 2 H₂O
Step 2: Calculate the moles corresponding to 20000 g of C₂H₂
The molar mass of C₂H₂ is 26.038 g/mol.
20000 g × 1 mol/26.038 g = 768.11 mol
Step 3: Calculate the moles of CO₂ produced from 768.11 moles of C₂H₂
The molar ratio of C₂H₂ to CO₂ is 2:4.
768.11 mol C₂H₂ × 4 mol CO₂/2 mol C₂H₂ = 1536.2 mol CO₂
Step 4: Calculate the mass corresponding to 1536.2 moles of CO₂
The molar mass of CO₂ is 44.01 g/mol.
1536.2 mol × 44.01 g/mol = 6.761 × 10⁴ g
If 43.1 g of O2 and 6.8 g of CO2 are placed in a 13.7 L container at 34 degrees C, what is the mixture of gasses?
answer must be in atm
Answer:
The total pressure of the gas mixture = 2.76 atm
Note: The question is not complete. The complete question is as follow:
If 43.1 g of O2 and 6.8 g of CO2 are placed in a 13.7 L container at 34 degree Celsius , what is the pressure of the mixture of gases?
Explanation:
Mass of O₂ gas = 43.1 g, molar mass of O₂ gas = 32.0 g/mol
Number of moles of O₂ gas = 43.1/32.0 = 1.347 moles
Mass of CO₂ gas = 6.8 g, molar mass of CO₂ gas = 44.0 g
Number of moles of CO₂ gas = 6.8/44 = 0.155 moles
Total number of moles of gas mixture, n = (1.347 + 0.155) = 1.502 moles
Volume of gas mixture, V = 13.7 L
Temperature of gas mixture, T = 34 °C = (273.15 + 34) K = 307.15 K
Pressure of gas mixture = ?
Molar gas constant, R = 0.0821 liter·atm/mol·K.
Using the ideal gas equation: PV =nRT
P = nRT/V
P = (1.502 × 0.0821 × 307.15) / 13.7
P = 2.76 atm
Therefore, the total pressure of the gas mixture = 2.76 atm
Where do most of the rivers in North Carolina flow to?
True or false silicon is a nonmetal
Answer:
True , Silicon is a nonmetal
When 577 J of energy is added to 32.3 g of aluminum at 17.4ºC, the temperature increases to 46.6ºC. What is the specific heat of aluminum?
Answer:
0.612 J/g°C
Explanation:
Using the formula as follows:
Q = m × c × ∆T
Where;
Q = amount of heat (Joules)
m = mass of substance (g)
c = specific heat capacity (J/g°C)
∆T = change in temperature (°C) i.e. final - initial temperature
According to the information provided in this question;
Q = 577 J
m = 32.3 g
c = ?
Final temp = 46.6ºC, initial temp. = 17.4°C
∆T = (46.6 - 17.4) = 29.2°C
Using Q = m × c × ∆T
c = Q ÷ m.∆T
c = 577 ÷ (32.3 × 29.2)
c = 577 ÷ 943.16
c = 0.6117
c = 0.612 J/g°C
need help asap, In this reaction how many units of B are required to form 40 units of C? A+2B--->C
Answer:
80 units B
Explanation:
Equation for the reaction is given below:
A + 2B —> C
From the equation above,
2 units of B reacted to produce 1 unit to C.
Finally, we shall determine the unit of B needed to produce 40 units of C. This can be obtained as follow:
From the equation above,
2 units of B reacted to produce 1 unit to C.
Therefore, x unit of B will react to produce 40 units of C i.e
x unit of B = 2 × 40
x unit of B = 80 units
Thus, 80 units B is needed for the reaction.
A chemist has a sample of 1.88 M HCl. What volume of the sample does he require to prepare 200 mL of 0.45 M HCl?
Answer: v = 200 ml · 0.45 M/ 1.88 M
Explanation: when solution is diluted, amount of substance
is same and n= c · V v1 = v2 · c2 / c1
The appropriate answer is "47.87 mL".
Given values are:
Concentration of undiluted HCl, [tex]C_1=1.88 \ M[/tex]Concentration of diluted HCl, [tex]C_2=0.45 \ M[/tex]Volume of diluted HCl, [tex]V_2=200 \ mL[/tex]By using the dilution equation, we get
→ [tex]C_1V_1=C_2V_2[/tex]
or,
→ [tex]V_1=\frac{C_2V_2}{C_1}[/tex]
By substituting the given values, we get
→ [tex]=\frac{0.45\times 200}{1.88}[/tex]
→ [tex]=\frac{90}{1.88}[/tex]
→ [tex]= 47.87 \ mL[/tex]
Thus the above answer is correct.
Learn more about volume here:
https://brainly.com/question/2520099
How do I tell my crush I like them...
Answer:
You can tell them on April Fools and if they reject you just say April Fools.
Answer: if u do it on text just say oh wrong person or something I’m not sure
Explanation:
You heat water and olive oil in two separate pans for a delicious new pasta recipe. The pans are the same temperature, but only the water is boiling! Why?
A
Olive oil has weaker intermolecular forces than water. This makes the intermolecular forces in oil easier to break, and keeps the molecules stuck together in a liquid state.
B
Water has weaker intermolecular forces than olive oil. This makes the intermolecular forces easier to break, allowing the individual water molecules to separate and change to a gas.
C
Water is losing electrons more quickly than olive oil is. The electrons float to the surface of the water, and their movement allows the phase change to happen.
Answer:
I think A is the correct answer
Answer: the answer is B 100%
For each of the solutions from above order the following in increasing polarity (from lowest to highest): solvent, more polar molecule, less polar molecule, silica gel. If the difference cannot be determined, indicate this by entering N/D. Note you might have to use a bit of logic and consider the properties of each. Useful information is found in the lab manual and student guide.
Solution % %Ethyl Lowest Next Lowest Next Highest Highest Number Hexane Acetate Polarity Polarity Polarity Polarity 1 100 0 4 75 25 3 50 50 5 5 25 75 2 0 100
Answer:
Solvent, less polar molecule, more polar molecule, silica gel
Explanation:
Solvent has lowest polarity but less polar molecule has more polarity than solvent. The more polar molecule has higher polarity value whereas silica gel has the highest polarity. The polarity of compounds is due to the difference of electronegativity values of the elements that bonded with each other. The difference of electronegativity value is high between silicon and oxygen is responsible for high polarity of silica gel.
Solubility is the mass in a given volume of a substance.
True
False
Answer: True
Explanation:
help people i really need this
If we add 22.5 g of HCl to 45.8 g of water, what is the percent by mass of HCl in the solution?
Answer:
[tex]\%m/m=33.0\%[/tex]
Explanation:
Hello there!
In this case, since the percent by mass of a solute in a solution is computed via the following division:
[tex]\%m/m=\frac{m_{solute}}{m_{solute}+m_{solvent}} *100\%[/tex]
Next, given the mass of HCl and that of water, we plug them in to obtain:
[tex]\%m/m=\frac{22.5g}{22.5g+45.8g} *100\%\\\\\%m/m=33.0\%[/tex]
Best regards!
Is this equation balanced: AgNO3 + 2 KCl -->AgCl + KNO3 Yes No
Answer:
No
Explanation:
AgNO₃ + KCl --> AgCl + KNO₃
This reaction is a precipitation reaction. AgCl is formed as a white solid due to its low solubility in water.
how do you melt water FREE 100 POINTS
Answer:
by adding heat
Explanation:
Adding heat can cause ice (a solid) to melt to form water (a liquid). Removing heat causes water (a liquid) to freeze to form ice (a solid).
by adding heat
when water was changes to soild or a gas , we say change to a different state of the matter. Even though the waters physical from change its molecular stay the same