g in the aftermath of a car accident, it is concluded that one driver slowed to a halt in 19 seconds while skidding 1700 feet. if the speed limit was 60 miles per hour, can it be proved that the driver had been speeding? (hint: 60 miles per hour is equal to 88 feet per second.) we can guarantee that at some time from when the driver first pressed on the brake to when the car came to a complete stop the car was traveling mph. therefore we (can/can not) conclude that the driver was speeding from the information given.

Answer:

Step-by-step explanation:

In the equation ax + b = 0, the value of x is not fixed and can vary based on the values of a and b. The purpose of this equation is to find the value of x that satisfies the equation, given the values of a and b.

For example, if a = 3 and b = -6, then the equation becomes 3x - 6 = 0. Solving for x, we get x = 2. Thus, 2 is the value of x that satisfies the equation.

The reason 0 is often used as an answer to this equation is because it represents a special case where b = 0. In this case, the equation becomes ax = 0, and the only solution is x = 0. However, in general, the value of x can be any real number that satisfies the equation.

The amount of yoghurt left is 12. 18 ounces

The algebraic expressions are defined as those expressions that are made up of variables, terms, constants, factors and coefficients.

The expressions are also composed of some arithmetic or mathematical operations, such as;

From the information given,

Let the total number of ounces of yoghurt be x

Let the number of ounces of yoghurt sold be y

We have that;

The number left= x - y

= 98.38 - 86.2

= 12. 18 ounces of yoghurt

Learn about algebraic expressions at: https://brainly.com/question/4344214

#SPJ1

Answer:

3. Yes because it is the same thing. (short answer just elaborate more)

4. No, a trapezoid cannot be a parallelogram. Trapezoid has only one pair of parallel sides while in a parallelogram there are two pairs of parallel sides.

5. see last sentence in 4

6. group 1: the diamond and the square tilted, and the square.

   group 2: the second one, the cup like shape, the cup shape but taller(the last one)

7. hard to see

8. hard to see

Step-by-step explanation:

Answer:

Step-by-step explanation:

[tex]f(-3)=-(-)3-1=2\\\\f(-2)=-(-2)-1=1\\\\f(0)=-0-1=-1\\\\f(2)=-2-1=-3\\\\f(4)=-4-1=-5\\\\f(x)=5\rightarrow 5=-x-1\rightarrow6=-x \rightarrow x=-6[/tex]

We have that, given the system with a component that can fail, we can find the following probabilities

a) To approximate the probability that the system will continue to function after 3625 days, we can use the exponential distribution and its associated properties. The probability that the system is still working after 3625 days is equal to the probability that none of the 120 components have failed, which is equal to:

Probability = e(-120*(3625-25)/25) = 0.091

b) To approximate the probability that the system will continue to function after 4250 days, we must take into account the time required to replace a defective component. Since the time required to replace a defective component is a random variable that is uniformly distributed over (0,0,5), the expected time to replacement is 0.25. Therefore, the probability that the system is still working after 4250 days is equal to:

Probability = e(-120*(4250-25)/25) * e(-120*(0.25)/25) = 0.018

See more information on exponential distribution in: https://brainly.com/question/28256132

#SPJ11

The equivalent resultant force is 1228.3 N and its location along AB, measured from A is 4.7 m.

The system of four forces acts on the roof truss. Determine the equivalent resultant force and specify its location along AB, measured from A.For the given system of forces, the components of each force should be determined first.The angle between the horizontal and the 500 N force is 60 degrees.Cos 60 = adjacent/hypotenuse Adjacent = cos 60 x 500 = 250 N This force is resolved into two components; one horizontal and the other vertical.250 N is the horizontal component.

The vertical component of this force is resolved as follows:Sin 60 = opposite/hypotenuse Opposite = sin 60 x 500 = 433 NThe system is now resolved and we get:Resolve force 700 N into components. The angle between the horizontal and the 700 N force is 30 degrees.Cos 30 = adjacent/hypotenuse Adjacent = cos 30 x 700 = 606 N

The vertical component of this force is resolved as follows:Sin 30 = opposite/hypotenuse Opposite = sin 30 x 700 = 350 N
Resolve force 600 N into components. This force acts horizontally and thus, it has no vertical component.Resolve force 800 N into components. This force acts vertically and thus, it has no horizontal component.

The components of the forces are summarized in the table below:Force components X component (N)Y component (N)5002504337006063506006000800 This information can now be used to determine the equivalent resultant force and its location.∑Fy = 250 N + 433 N + 350 N - 800 N = 233 N∑Fx = 606 N + 600 N = 1206 N Therefore;∑F = √[(∑Fx)² + (∑Fy)²]= √[(1206)² + (233)²]= 1228.3 N From the force diagram, the distance of the equivalent resultant force from A, measured along AB is given by the ratio of the moment of the force about A and the force itself:Moment of force about A = 250 x 6 + 606 x 2.5 + 600 x 1 = 5750 N.m Therefore, Distance of the force from A = Moment of force about A / ∑F= 5750 N.m / 1228.3 N= 4.7 m (to 1 decimal place)

Therefore, the equivalent resultant force is 1228.3 N and its location along AB, measured from A is 4.7 m.

Learn more about Equivalent resultant force

brainly.com/question/30833433

#SPJ11

The 95% confidence interval for the population mean is equal to (30.4,39.6).

A confidence interval is a range of values that surrounds the point estimate, such as a sample mean, and provides a sense of the precision of the estimate. The confidence interval (CI) contains the estimated parameter at a given level of confidence, usually 95% or 99%.

The 95% confidence interval for the population mean is given by:

x(bar) ± Zα/2 * σ/√n

Where,

x(bar) = 35σ = 100n = 25Zα/2 = Z0.025 = 1.96

Substituting the values, we get:

CI = 35 ± 1.96 * 100/√25

CI  = (30.4,39.6)

Hence, the 95% confidence interval for the population mean is (30.4,39.6).

You can learn more about confidence interval at

https://brainly.com/question/15712887

#SPJ11

Answer: Xavier will receive $3.21 in change.

Step-by-step explanation:

To find the change Xavier receives, we need to subtract the cost of the dog collar from the amount he paid with his $10 bill:

Change = $10 - $6.79 = $3.21

Therefore, Xavier will receive $3.21 in change.

The work needed to bring two point charges from infinity to their current positions is equal to the Coulomb potential energy of the system, given by: U = kQ1Q2/r, where k is the Coulomb constant, Q1 and Q2 are the two point charges, and r is the distance between them.

The electric potential due to the two charges at the vertex p is given by the sum of the potentials of each charge individually. V = kQ1/r1 + kQ2/r2, where k is the Coulomb constant, Q1 and Q2 are the two point charges, and r1 and r2 are the distances between the charges and the vertex p.The direction of the electric field due to the two charges at the vertex p is given by the vector sum of the electric field of each charge individually. The direction of the electric field due to each charge can be calculated by taking the vector difference between the position of the charge and the position of the vertex p.

The magnitude of the electric field due to the two charges at the vertex p is given by the sum of the magnitudes of the electric fields of each charge individually. Etotal = √(E12 + E22), where E1 and E2 are the electric fields due to the two charges.

For more questions on potential energy

https://brainly.com/question/16167018

#SPJ11

The oldest and youngest the

time periods are Silurian and Tertiary respectively. Order the time periods from oldest to youngest is equals to

Silurian--> Triassic --> Jurassic -->Tertiary.

We have a table which shows different geologic time periods.

Period Number of Years Ago

Jurassic 2.08 × 10⁸

Silurian 4.38× 10⁸

Tertiary 6.64× 10⁷

Triassic 2.45× 10⁸

We have to order the time periods from oldest to youngest. Time period is the length of time during which an activity occurs and geologic time period showing the geologic eons, eras, periods, epochs, and associated. Now, we check the time periods and put in order.

So, 2.08 × 10⁸ = 2,08000,000

4.38× 10⁸ = 4,38000,000

6.64× 10⁷ = 6,6400,000

2.45× 10⁸ = 2,45000,000

Here, longest or oldest time period

= 4,38000,000

Youngest time period = 6,6400,000

Therefore, the order of time periods is Silurian --> Triassic -->Jurassic -->Tertiary. Hence, required time periods are Silurian and Tertiary.

For more information about order , visit :

https://brainly.com/question/1094377

#SPJ4

To design a cylindrical can (with a lid) to contain 1 liter (= 1000 cm3) of water, using the minimum amount of metal, we need to consider the following parameters:Height and Diameter of the canThickness of the metalMaterial used for making the canLet's assume we use Aluminium as a material. Now, let's start designing the can:Height of the can:

Volume of water = 1000 cm3Volume of cylinder = πr²hVolume of cylinder = π (d/2)² hVolume of cylinder = π (d²/4) hVolume of cylinder = 1000 cm³π (d²/4) h = 1000 cm³d²h = 4000 cm³h = (4000 cm³) / (π d²) h = (4000 cm³) / (3.14 * d²) h = (1273.24) / d²Diameter of the can:

Volume of cylinder = πr²hVolume of cylinder = π (d/2)² hVolume of cylinder = π (d²/4) hVolume of cylinder = 1000 cm³π (d²/4) h = 1000 cm³d²h = 4000 cm³d² = (4000 cm³) / h d² = (4000 cm³) / (1273.24/d²) d² = 3.1425d = 17.8 cmThickness of the metal:We can assume the thickness to be 0.5 mm.Material used for making the can:AluminiumTotal Surface Area of the can:Total Surface Area of cylinder = 2πrhTotal Surface Area of cylinder = 2π(d/2)(1273.24/d²)Total Surface Area of cylinder = 1273.24/d Total Surface Area of lid = πr²Total Surface Area of lid = π (d/2)²Total Surface Area of lid = π (17.8/2)²Total Surface Area of lid = 248.5Total Surface Area of the Can = 1273.24/d + 248.5Now, we can calculate the minimum amount of Aluminium required to make the can by minimizing the Total Surface Area of the can.Total Surface Area of the can = 1273.24/d + 248.5d (in cm)Total Surface Area of the can = 1273.24/7.09 + 248.5(7.09)Total Surface Area of the can = 584.24Therefore, the minimum amount of Aluminium required to make the can is 584.24 cm².

for such more questions on Total Surface Area

https://brainly.com/question/31186196

#SPJ11

Answer:

Step-by-step explanation:

You want the measures of AO and DO in a trapezium in which AB║CD, the diagonals intersect at O, and AB = 3 cm, CD = 6 cm, CO = 4 cm, OB = 3 cm.

Diagonal AC is a transversal to parallel lines AB and CD, so alternate interior angles BAO and DCO are congruent. Vertical angles AOB and COD are also congruent, so ∆ABO ~ ∆CDO by the AA similarity postulate.

This means the side lengths are proportional, so ...

  AB/CD = AO/CO = BO/DO

  3/6 = AO/4 = 3/DO   ⇒   AO = 2, DO = 6

The measures of AO and DO are 2 cm and 6 cm, respectively.

__

Additional comment

It can help to draw a diagram.

Answer:Given : number of hours spent studying for a history final exam and the score on that exam.

To Find : Which value is an outlier

(1.5, 65)

(3.5, 71)

(4.5, 98)

(6.5, 88)

Solution:

Number of hours spent studying =x            

Exam score   = y

x         y

1.5       65

2         68

3.5      71

4.5      98

6         82

1.5 -   2   difference = 0.5

2 - 3.5     difference = 1.5

3.5 - 4.5   difference = 1

4.5 - 6       difference = 1.5

No outlier

65  - 68   Difference  3

68 - 71      Difference  3

71 -  98      Difference  27

71 - 82     Difference  11

Hence 98 is outlier

(4.5    ,  98 )  is outlier

Learn More:

Mrs. Juarez graded ten English papers and recorded the scores. 92 ...

brainly.in/question/16382460

If the first quartile is 142 and the semi-interquartile range is 18, find ...

brainly.in/question/13279139

first quartile is 20 then semi-inter quartile range is

brainly.in/question/13187486

Step-by-step explanation:

The number of students traveling are 2 students out of the 30 who are traveling out of the country this summer.  If 1/3 of the students are traveling somewhere this summer, then we can calculate the number of students who are traveling by multiplying the total number of students by 1/3:

Number of students traveling = 30 x 1/3 = 10  

Now, we need to find out how many of these 10 students are traveling out of the country. We know that 1/5 of the students who are traveling are going out of the country, so we can find the number of students who are traveling out of the country by multiplying the total number of traveling students by 1/5:

Number of students traveling out of the country = 10 x 1/5 = 2

Therefore, there are 2 students out of the 30 who are traveling out of the country this summer.

It's important to note that fractions can be converted to decimals or percentages to make them easier to work with. For example, 1/3 can be written as 0.33 or 33%, and 1/5 can be written as 0.20 or 20%. This can be particularly useful when dealing with more complex problems or when working with larger numbers.

In summary, by using the information given, we can determine that out of the 30 students in Mr. Hall's class, 10 are traveling somewhere this summer, and out of those 10 students, 2 are going out of the country. This type of problem-solving helps build math skills that are applicable in real-world scenarios, such as budgeting and planning for travel.

To know more about  traveling click here:

brainly.com/question/17235551

#SPJ4

The z-score for the 25th percentile of a standard normal distribution is approximately -0.625. Here option A is the correct answer.

To find the z-score for the 25th percentile of a standard normal distribution, we need to use a standard normal distribution table or calculator. The 25th percentile corresponds to a cumulative area under the standard normal curve of 0.25.

Using a standard normal distribution table or calculator, we can find that the z-score corresponding to a cumulative area of 0.25 is about -0.68. This means that approximately 25% of the area under the standard normal curve lies to the left of -0.625.

So, among the given options, the correct answer is Option A, -0.625, Option D, -0.50, which is also incorrect. Option E, 0.00, is definitely incorrect because the 25th percentile is to the left of the mean.

To learn more about standard normal distribution

https://brainly.com/question/29509087

#SPJ4

Answer:

4.75 liters of punch

Step-by-step explanation:

2.8 + 0.75 = 3.55

3.55 + 1.2 = 4.75 liters of punch

There will be 30 yards of the string that will be leftover.

What are Arithmetic operations?

It is a field of mathematics that deals with the study of numbers and the operations on those numbers that are relevant to all other areas of mathematics. The basic operations included in it are addition, subtraction, multiplication, and division. The term "arithmetic operator" refers to the operator that does the calculation.

Given that,

Total Length of string = 50 yards.

The total number of students = 24.

Total used string = 24 × 30 = 720.

We know that 1 foot = 12 inches,

So, 150 feet = 1800 inches.

Therefore, yards of string leftover = (1800 - 720)/36

                                                         = 1080/36

                                                         = 30 yards.

Hence, there will be 30 yards of string that will be leftover.

To learn more about arithemetic operations, refer to:

https://brainly.com/question/25834626

#SPJ4

Answer: a > -1

Explanation is in the image.

Answer:

[tex]a > -1[/tex]

Step-by-step explanation:

1) Write the equation

[tex]-2a+14 < 5a+21\\[/tex]

2) Collect like terms on their corresponding side

[tex]-7a < 7[/tex]

3) Divide -7 from both sides and flip the sign

[tex]a > -1[/tex]

If the null hypothesis is actually true, then there is a 5% chance that the researcher will end up accepting the alternative hypothesis in error, the statement is true.

If a hypothesis test is performed with a level of significance of 0.05 and the null hypothesis is actually true, then there is a 5% chance (or 0.05 probability) that the researcher will reject the null hypothesis and accept the alternative hypothesis in error.

This is known as a Type I error. The Type I error rate is determined by the level of significance of the test.

In other words, if the null hypothesis is true, but the researcher concludes that it is false (i.e., accepts the alternative hypothesis), this is an incorrect decision that is made with a probability of 0.05 or 5%, assuming a significance level of 0.05.

To learn more about alternative hypothesis:

https://brainly.com/question/25263462

#SPJ11

The estimated probability of a success is 40% since the numbers 1 and 2 represent a success out of the integers 1 to 5. Therefore, the success outcomes (1 and 2) make up 2 out of 5 possible outcomes, or 40%.

To find the estimated probability of a success, we need to determine the proportion of successes in the generated list.

Out of the numbers 1 to 5, two numbers represent success (1 and 2). Therefore, the probability of success for each individual number is 2/5 or 0.4.

Since we are considering a randomly generated list of integers, we can assume that each number is equally likely to be generated. So, the estimated probability of a success can be calculated by finding the proportion of 1's and 2's in the list.

Let's assume that the list has n elements. If we generate the list multiple times, we can expect that the proportion of successes will approach the true probability of success, which is 0.4.

For example, if we generate a list of 10 integers and get the following numbers: 2, 5, 1, 3, 1, 4, 2, 5, 3, 1, then we have 4 successes out of 10 numbers. So, the proportion of successes in this list is 4/10 or 0.4, which matches the true probability of success.

Therefore, the answer is A. 40%.

Learn more about probability here: brainly.com/question/30034780

#SPJ4

The rewritten expression  3.00 +2.25(m-1) is 2.25m + 0.75.

The cost for a taxi ride is $3.00 for the first mile and $2.25 for each additional mile.

Therefore, let's rewrite the expression 3.00 +2.25(m-1) for the cost of the taxi ride in dollars as a sum of two terms, where m represents the miles travelled.

Hence,

Therefore, the cost using expression is as follows:

3 + 2.25(m - 1)

3 + 2.25m - 2.25

combine like terms

2.25m + 3 - 2.25

2.25m + 0.75

learn more on expression here: https://brainly.com/question/11121991

#SPJ1

In monopolistic competition, the end result of entry and exit is that firms end up with a price that lies on the downward-sloping portion of the average cost curve.

Monopolistic competition is a market condition in which many small firms compete with each other by selling slightly varied, but essentially comparable goods or services at somewhat different prices. These companies enjoy some market power, but they are not monopolies because their products or services are close substitutes for each other.

The equilibrium price in a monopolistically competitive market is a long-run, but not a short-run, outcome of entry and exit. Because the market is monopolistic, entry and exit do not have an immediate impact on the price; it simply alters the number of producers operating in the market. Over time, the entry and exit of producers in the industry will increase or decrease the number of substitutes available, driving demand curves and resulting in the price of the commodity settling on the down-sloping portion of the average cost curve in the long run.

Therefore, it can be concluded that the end result of entry and exit in monopolistic competition is that companies end up with a price that lies on the downward-sloping portion of the average cost curve.

To know more about "monopolistic competition": https://brainly.com/question/25717627

#SPJ11

Considering the volume of the rectangular prism, the height of the sand inside the box is of 2 feet.

The volume of a rectangular prism, with dimensions length, width and height, is given by the multiplication of these dimensions, according to the equation presented as follows:

Volume = length x width x height.

The parameters for this problem are given as follows:

Hence the height of the sand inside the box is given as follows:

2 x 1.5 x h = 6

3h = 6

h = 2 ft.

More can be learned about the volume of a rectangular prism at brainly.com/question/22070273

#SPJ1

Given:

The inequality is

[tex]-3(2x - 5) < 5(2 - x)[/tex]

To find:

The correct representations of the given inequality.

Solution:

We have,

[tex]-3(2x - 5) < 5(2 - x)[/tex]

Using distributive property, we get

[tex]-3(2x)-3(-5) < 5(2)+5(-x)[/tex]

[tex]-6x+15 < 10-5x[/tex]

Therefore, the correct option is C.

Isolate variable terms.

[tex]15-10 < 6x-5x[/tex]

[tex]5 < x[/tex]

It means, the value of x is greater than 5.

Since 5 is not included in the solution set, therefore, there is an open circle at 5.

So, the graphical represents of the solution is a A number line from negative 3 to 3 in increments of 1. An open circle is at 5 and a bold line starts at 5 and is pointing to the right.

Therefore, the correct option is D.

Answer:

To rewrite the quadratic equation in the form y = a(x - p)²+q, we need to complete the square.

y = 2x^2 + 16x + 26

y = 2(x^2 + 8x) + 26

y = 2(x^2 + 8x + 16 - 16) + 26 // Adding and subtracting (8/2)^2 = 16 inside the parentheses

y = 2((x + 4)^2 - 16) + 26

y = 2(x + 4)^2 - 32 + 26

y = 2(x + 4)^2 - 6

Therefore, the quadratic equation y = 2x ^ 2 + 16x + 26 rewritten in the form y = a(x - p)²+q is y = 2 * (x + 4) ^ 2 - 6, so the answer is D

Answer:

y= 2(x+4)^2 -6

Step-by-step explanation:

y= 2x^2 + 16x + 26

It is in the form y= ax^2 + bx + c

To rewrite in the form y=a(x-p)^2 + q

We need to fin p and q. We already have a in the original equation.

In y= 2x^2 + 16x + 26,    a=2.

The formula say that:  p=-b/2a

p= -16/(2*2)

p=-16/4

p=-4

In the formula, we replace a and  y= 2(x-(-4))^2 +q

Obtaining, y= 2 (x+4)^2 + q

Now, to find q we need to obtain a point from the original equation. Commonly the y-intercept. In the form y= ax^2 + bx + c ; C is the y-intercept.

y-intercept: (0,c)

Therefore, in y= 2x^2 + 16x + 26

y-intercept: (0,26)

In the equation we already have:

y= 2(x+4)^2 +q

26= 2(0+4)^2 + q

26=2(4)^2 +q

26= 2(16) + q

26= 32 + q

-6 = q

Joining all the results, we obtain:

y= 2(x+4)^2 -6

The total surface area of the remaining portion is approximately 23.14 in.

To find the total surface area of the remaining portion of a wooden sphere after two equal caps have been removed, use the formula SA = 4πr2. A sphere is symmetrical, and thus, the diameter of the wooden sphere is equal to the diameter of the remaining portion. The radius of the remaining portion is equal to half the diameter of the sphere minus the radius of the cap.

The diameter of the wooden sphere is 11.8 in. As such, the radius of the sphere is 5.9 in. If two equal caps are removed, the diameter of the remaining portion is equal to 11.8 in - 2x R_cap, where R_cap is the radius of the cap. Since the caps are equal, we can simplify the formula to

D = 11.8 - 2R_cap. R_cap is equal to the radius of a circle with area equal to the surface area of one cap. As such, we can use the formula SA = 2πrh + πr2 to find the surface area of the cap. We know the diameter of the sphere is 11.8 in. Thus, the radius of the sphere is 5.9 in. We also know that the height of the cap is 5.9 in. Since the caps are equal, we can use the formula to find the surface area of one cap and multiply by 2 to get the total surface area of both caps.

SA_cap = 2π(5.9 in)(5.9 in) + π(5.9 in)

2SA_cap = 2π(34.84 in2) + π(34.84 in2)

SA_cap = 2π(34.84 in2) + 109.45 in2SA_cap ≈ 219.74 in

Since the surface area of the cap is equal to 219.74 in, we can use the formula to find the radius of the cap.

219.74 in = 2πrh + πr22(219.74 in2)

= 2π(5.9 in)h + π(5.9 in)22(219.74 in2)

= 37.699 in2 + 109.45 in23r2

= 72.533 in2r ≈ 4.545 in

Using the formula D = 11.8 - 2R_cap, we can find the diameter of the remaining portion of the wooden sphere.

D = 11.8 - 2(4.545 in)D ≈ 2.71 in

The radius of the remaining portion of the wooden sphere is equal to 5.9 in - 4.545 in. Thus, the radius of the remaining portion of the sphere is 1.355 in. Finally, we can find the total surface area of the remaining portion of the sphere.

SA = 4πr2SA = 4π(1.355 in)2SA ≈ 23.14 in

Therefore, the total surface area of the remaining portion is approximately 23.14 in.

To learn more about total surface area of sphere refer :

https://brainly.com/question/14692728?

#SPJ11

It is Arithmetic Sequence. An ordered group of numbers with a shared difference between each succeeding term is known as an arithmetic sequence.

For the given sequence

d= 49-56 = -7

d= 42-49 = -7

Thus, there is -7 as a common difference between the terms.

The distance between succeeding terms in an arithmetic series is always the same. It is often referred to as an arithmetic series or arithmetic progression. The following statement can be used to represent an arithmetic sequence: a, (a + d), (a + 2 d), (a + 3 d),..., where a is the first term and d is the constant difference between values.

To determine the sum of an arithmetic sequence, it is generally simple to add or subtract all the terms in a short series together. An individual can quickly determine the sum of an arithmetic series for a particular number of terms by using the generic formula for the nth term of an arithmetic sequence.

Learn more about Arithmetic Sequence here: brainly.com/question/15412619

#SPJ4

Answer:

perimeter=42

Area=90

Step-by-step explanation:

find the length of DEFG:

perimeter=a=b+a+b

28=10+b+10+b

28=20+2b

8=2b

4=b

finding the scale factor:

15/10=3/2

to find the perimeter of WXYZ:

the missing side:

=4x3/2

=6

perimeter=a+b+a+b

perimeter=15+6+15+6

perimeter=42

Area of WXYZ:

Area=bh

Area=15x6

Area=90

Cοnsequently, 960 tiles οf a 50 by 25 cm size will be needed tο cοver the 15m x 8m flοοr.

Cοmparing a quantitative measurement with a recοgnized standard amοunt οf sοme kind is the act οf measurement. Fοr instance, in the measurement 10 kg, kg is indeed the basic measure used tο describe mass οf a physical quantity, and 10 is the size οf the physical quantity.

Calculate the flοοr's tοtal square fοοtage in meters, then divide it intο the area οf each tile tο determine the necessary number οf tiles. The measurements must first be changed tο a cοmparable unit. By dividing by 100, we may cοnvert centimeters tο meters:

15m = 1500cm

8m = 800cm

In square meters, the flοοr space is as fοllοws:

1500cm x 800cm = 1200000cm² = 120m²

The area οf the each tiles in square meters must nοw be determined. The size οf each tile, which is 50 by 25 centimetres, is as fοllοws:

50cm x 25cm = 1250cm² = 0.125m²

Lastly, by dividing the entire flοοr area even by area οf each tile, we can determine the necessary number οf tiles:

120m² / 0.125m² = 960 tiles

The flοοr will therefοre need 960 tiles that are 50 cm by 25 cm in size tο cοver its 15 m × 8 m surface.

To know more about Measure visit:

brainly.com/question/4725561

#SPJ1

The expression (6 + 2a) - (-a - 5) is equivalent to 3a + 11. The other options given are not equivalent to (2a + 6) - (-a-5).

In mathematics, a negative sign is a symbol used to represent a negative value or operation. It is represented by the symbol "-", which is usually placed before a number to indicate that the number is negative.

To simplify (2a + 6) - (-a-5), we can distribute the negative sign:

(2a + 6) - (-a-5) = 2a + 6 + a + 5 = 3a + 11

Therefore, the expression equivalent to (2a + 6) - (-a-5) is:

3a + 11

Out of the options given, the equivalent expression is:

(6 + 2a) - (-a - 5)

We can simplify this expression in the same way as above:

(6 + 2a) - (-a - 5) = 6 + 2a + a + 5 = 3a + 11

Therefore, the expression (6 + 2a) - (-a - 5) is equivalent to 3a + 11.

The other options given are not equivalent to (2a + 6) - (-a-5).

To know more about negative sign visit:

https://brainly.com/question/29461821

#SPJ1