Given a line segment that contains the points A,B, & C in order, if AB = x + 12, and BC = 2x - 4, and AC = 26, find x.

A sample of at least 62 flights to limit the error to 1000 miles with 95% confidence.

To determine the required sample size to limit the error to 1000 miles, we need to use the formula for the margin of error for a mean:

ME = z* (s / sqrt(n))

Where ME is the margin of error, z is the z-score for the desired level of confidence, s is the sample standard deviation, and n is the sample size.

Rearranging this formula to solve for n, we get:

n = (z* s / ME)^2

Since we do not know the population standard deviation, we can use the sample standard deviation as an estimate. Assuming a conservative estimate of s = 4000 miles, and a desired level of confidence of 95% (which corresponds to a z-score of 1.96), we can plug these values into the formula to get:

n = (1.96 * 4000 / 1000)^2 = 61.46

Rounding up to the nearest whole number, we get a required sample size of 62. Therefore, we need to take a sample of at least 62 flights to limit the error to 1000 miles with 95% confidence.

Learn more about confidence here

https://brainly.com/question/20309162

#SPJ11

The probability that it is a poor product given that it received a good review is 0.0148.

Let's solve the problem with Baye's theorem: Baye's theorem is used to find the probability of an event happening, based on the probability of another event that has already happened. It is expressed as P(A/B)= P(B/A) * P(A)/P(B).In this case, the events are:
A: The product is poor.
B: The product receives a good review.
P(A/B) is the probability that the product is poor, given that it receives a good review. P(B/A) is the probability that the product receives a good review, given that it is poor. P(A) is the probability that a product is poor. P(B) is the probability that a product receives a good review. Let's find out the probabilities for each event:

P(A) = 0.20P(B) = P(B/A) * P(A) + P(B/M) * P(M) + P(B/H) * P(H)

= 0.05 * 0.20 + 0.80 * 0.30 + 0.90 * 0.50

= 0.675P(B/A) = 0.05P(A/B) = P(B/A) * P(A)/P(B)

= (0.05 * 0.20)/0.675 = 0.0148

The probability that a new design attains a good review is 0.675. The probability that it is a poor product given that it received a good review is 0.0148.

Therefore, the probability that it is a poor product given that it received a good review is 0.0148.

To know more about probability visit:

https://brainly.com/question/31828911

#SPJ11

Thus, at x ≈ 1.4142, the tangent line to the graph of y = x + 2/x is horizontal.

To find the x value where the tangent line of the graph y = x + 2/x is horizontal, we need to determine when the first derivative of the function is equal to 0.

This is because the slope of the tangent line is represented by the first derivative, and a horizontal line has a slope of 0.

First, let's find the derivative of y = x + 2/x with respect to x. To do this, we can rewrite the equation as y = x + 2x^(-1).

Now, we can differentiate:
y' = d(x)/dx + d(2x^(-1))/dx = 1 - 2x^(-2)

Next, we want to find the x value when y' = 0:
0 = 1 - 2x^(-2)

Now, we can solve for x:
2x^(-2) = 1
x^(-2) = 1/2
x^2 = 2
x = ±√2

Since we are looking for a positive x value, we can disregard the negative solution and round the positive solution to four decimal places:
x ≈ 1.4142

Thus, at x ≈ 1.4142, the tangent line to the graph of y = x + 2/x is horizontal.

Know more about the tangent line

https://brainly.com/question/30162650

#SPJ11

The point (1.8, 0) a good approximation of an x-intercept

From the question, we have the following parameters that can be used in our computation:

y = -16x² + 29x

The x-intercept is when y = 0

So, we have

x = 1.8 and y = 0

When these values are substituted in the above equation, we have the following

-16(1.8)² + 29(1.8) = 0

Evaluate

0.36 = 0

0.36 approximates to 0

This means that the point (1.8, 0) a good approximation of an x-intercept

Read more about x-intercept at

https://brainly.com/question/3951754

#SPJ1

The part of 950 foot² space the students can use is,

⇒ 190 foot²

Since,

Suppose the value of which a thing is expressed in percentage is "a'

Suppose the percent that considered thing is of "a" is b%

Then since percent shows per 100 (since cent means 100), thus we will first divide the whole part in 100 parts and then we multiply it with b so that we collect b items per 100 items(that is exactly what b per cent means).

Thus, that thing in number is

a x b / 100

Students can use 20% of 950-sq.foot.

Now, 20% of 950-sq.-foot is derived as:

= 20 x 950/100

= 190 foot²

Thus, the part of 950 foot² space the students can use is: 190 foot².

Learn more about percentage here:

brainly.com/question/11549320

#SPJ1

Given the circle equation: (x-5)^2 + (y-3)^2 = 16

Since we have the parametric equation for x: x = 5 + 4cos(t), we need to find the parametric equation for y.

To do this, let's substitute the given parametric equation for x into the circle equation:

(5 + 4cos(t) - 5)^2 + (y - 3)^2 = 16

Simplifying, we get:

(4cos(t))^2 + (y - 3)^2 = 16

Now, since we are going clockwise, we will use -sin(t) instead of sin(t) for the parametric equation for y:

(4cos(t))^2 + (3 - 4sin(t) - 3)^2 = 16

Simplifying, we get:

(4cos(t))^2 + (-4sin(t))^2 = 16

Now, we know that (cos(t))^2 + (sin(t))^2 = 1, so:

(4^2)((cos(t))^2 + (sin(t))^2) = 16
16(1) = 16

This equation holds true, so our parametric equation for y is:

y = 3 - 4sin(t)

Therefore, the complete parametric equations for the circle traced clockwise are:

x = 5 + 4cos(t)
y = 3 - 4sin(t)

To know more about circle visit:

https://brainly.com/question/24375372

#SPJ11

The researcher collated data on Americans' leisure time activities. She found the mean number of hours spent watching television each weekday to be 2.7 hours with a standard deviation of 0.2 hours.

Jonathan believes that his football team buddies watch less television than the average American. He gathered data from 40 football teammates and found the mean to be 2.3. H0: μ = 2.7; Ha: μ < 2.7 is the correct null and alternative hypotheses.

What is a hypothesis?A hypothesis is a statement that can be tested to determine its validity. A null hypothesis and an alternate hypothesis are the two types of hypotheses. The null hypothesis is typically the statement that is believed to be correct or true. The alternate hypothesis is the statement that opposes the null hypothesis. Researchers use hypothesis tests to determine the likelihood of the null hypothesis being correct.

Know more about researcher collated data here:

https://brainly.com/question/31597598

#SPJ11

1. The Taylor series for f(x) centered at 4 if [tex]f(x) = \sum_{n=0}^{Infinity}(n+3)(x-4^n)/(n+1)!2)[/tex] is [tex]f(23.4) = \sum_{n=0}^{Infinity}(n+3)(23.4-4^n)/(n+1)![/tex]

2. The Taylor series for f(x) centered at the given value of a is f(x) = -4 + 2(x+2) - (2/3)(x+2)² + (4/3)(x+2)³ - ...

1.  To find the Taylor series for f(x) centered at 4, we need to first find the derivatives of f(x):

[tex]f(x) = \sum_{n=0}^{Infinity}(n+3)(x-4^n)/(n+1)!f'(x) = \sum_{n=1}^{Infinity}(n+2)(x-4^{n-1})/n!\\f''(x) = \sum_{n=2}^{Infinity}(n+1)(x-4^{n-2})/(n-1)!\\f'''(x) = \sum_{n=3}^{Infinity}(n)(x-4^{n-3})/(n-2)!\\[/tex]

and so on. Note that for all derivatives of f(x), the constant term is zero.

Now, to find f(23.4), we can substitute x = 23.4 into the Taylor series for f(x) centered at 4 and simplify:

[tex]f(x) = \sum_{n=0}^{Infinity}(n+3)(x-4^n)/(n+1)!\\f(23.4) = \sum_{n=0}^{Infinity}(n+3)(23.4-4^n)/(n+1)![/tex]

The series converges by the Ratio Test, so we can evaluate it numerically to find f(23.4).

2. To find the Taylor series for f(x) centered at a = -2, we can use the formula:

[tex]f(x) = \sum_{n=0}^{Infinity}f^{(n)}(a)/(n!)(x-a)^n[/tex]

where f^{(n)}(a) denotes the nth derivative of f(x) evaluated at a.

First, we find the derivatives of f(x):

f(x) = 8/x

f'(x) = -8/x²

f''(x) = 16/x³

f'''(x) = -48/x⁴

and so on. Note that all derivatives of f(x) have a factor of 8/x^n.

Next, we evaluate each derivative at a = -2:

f(-2) = -4

f'(-2) = 2

f''(-2) = -2/3

f'''(-2) = 4/3

and so on.

Finally, we substitute these values into the formula for the Taylor series to obtain:

f(x) = -4 + 2(x+2) - (2/3)(x+2)² + (4/3)(x+2)³ - ...

Note that the radius of convergence of this series is the distance from -2 to the nearest singularity of f(x), which is x = 0. Therefore, the radius of convergence is R = 2.

To know more about Taylor series here

brainly.com/question/29733106

#SPJ11

The two numbers whose sum is 100 and whose product is a minimum are: x= 50 and y= 50.

To find two numbers whose sum is 100 and whose product is a minimum, we can use the Second Derivative Test. Let's start by defining the two numbers as x and y. We know that:

x + y = 100

We want to find the minimum value of xy. So, let's define a function f(x) = xy. We can rewrite this function in terms of one variable:

f(x) = x(100 - x) = 100x - x^2

Now, let's find the critical point of this function by taking the derivative:

f'(x) = 100 - 2x

Setting f'(x) = 0 to find the critical point:

100 - 2x = 0
x = 50

So, the critical point is x = 50. To determine whether this is a minimum or maximum, we need to find the second derivative:

f''(x) = -2

Since f''(50) < 0, we know that the critical point x = 50 is a maximum. Therefore, to find the minimum value of f(x), we need to evaluate f at the endpoints of the interval [0, 100]:

f(0) = 0
f(100) = 0

Since f(x) is decreasing from x = 0 to x = 50, and increasing from x = 50 to x = 100, the minimum value of f(x) occurs at x = 50. Therefore, the two numbers whose sum is 100 and whose product is a minimum are:

x = 50
y = 100 - x = 50

So, the two numbers are 50 and 50.

To know more about Second Derivative Test, refer to the link below:

https://brainly.com/question/30404403#

#SPJ11

Navid paid $469.44 for a new carpet for his bedroom. The dimensions of his bedroom floor are shown below. We need to find the area of his bedroom floor to know how much carpet Navid needs. Navid bought a carpet for 120 square feet, but his bedroom floor is 120 square feet, so he used all the carpet he bought. Therefore, Navid doesn't have any carpet left.

Let's see how we can calculate the area.

Area of rectangle = length × width

Here, the Length of the bedroom floor = 12 ft

width of the bedroom floor = 10 ft

Area of the bedroom floor = 12 ft × 10 ft = 120 ft²

Now we know that the bedroom floor is 120 square feet.

Therefore, Navid will need 120 square feet of carpet to cover his bedroom floor.

However, we need to know how much carpet Navid left after installing the carpet. If he bought a carpet that is sold by the square yard, we can find the total cost per square yard by dividing the total cost by the number of square feet in a square yard.

1 square yard = 9 square feet cost per square foot

= $469.44 ÷ 120 sq ft

= $3.91

We can convert this cost per square foot to cost per square yard by dividing by 9.

Cost per square yard = $3.91 ÷ 9

= $0.44

So, Navid spent $0.44 for each square foot of carpet. We can use this information to determine how much carpet Navid has left after installing the carpet. Navid bought a carpet for 120 square feet, but his bedroom floor is 120 square feet, so he used all the carpet he bought.

Therefore, Navid doesn't have any carpet left.

To know more about dimensions visit:

https://brainly.com/question/31106945

#SPJ11

The 19th percentile of x bar is 71.724.

Since the sample size is greater than 30 and the population standard deviation is known, we can use the normal distribution to find the 19th percentile of x bar.

First, we need to find the standard error of the mean (SEM):

SEM = σ/√n = 8/√50 = 1.1314

Next, we need to find the z-score associated with the 19th percentile. We can use a standard normal distribution table or a calculator to find this value, which is approximately -0.877.

Finally, we can use the formula for a confidence interval to find the value of x bar associated with the 19th percentile:

x bar = μ + z*SEM = 73 + (-0.877)*1.1314 = 71.724

Therefore, the 19th percentile of x bar is approximately 71.724.

Know more about percentile here:

https://brainly.com/question/28839672

#SPJ11

To find the number of all subsets of the set A ∪ B with 4 elements, where A = {1, 2, 3, 6, 7} and B = {3, 6, 7, 8, 9}, we need to consider all possible combinations of elements from the union of A and B that have a cardinality of 4.

The cardinality of the union A ∪ B is 9, as it contains all distinct elements from both sets. We need to choose 4 elements from this union, which can be done in C(9, 4) ways, where C(n, r) denotes the combination of selecting r elements from a set of n elements.

Using the formula for combinations, C(n, r) = n! / (r! * (n - r)!), we can calculate the number of subsets.

C(9, 4) = 9! / (4! * (9 - 4)!) = 9! / (4! * 5!) = (9 * 8 * 7 * 6) / (4 * 3 * 2 * 1) = 126.

Therefore, there are 126 subsets of the set A ∪ B with 4 elements.

Learn more about subsets here: brainly.com/question/32386149

#SPJ11

The answer is : OA. The statement is false because the focal diameter determines the size of the opening of the parabola. The larger the focal diameter, the wider the parabola.

The statement is false because the size of the opening of a parabola is determined by the distance between its focus and directrix, not by the focal diameter. The focal diameter is defined as the distance between the two points on the parabola that intersect with the axis of symmetry and lie on opposite sides of the vertex. It is twice the distance between the focus and vertex.

In a standard parabolic equation of the form y = ax^2 + bx + c, the coefficient a determines the "width" of the parabola. If a is positive, the parabola opens upwards, and if a is negative, the parabola opens downwards. The larger the absolute value of a, the narrower the parabola.

Therefore, a parabola with a larger focal diameter actually has a wider opening, since it corresponds to a smaller absolute value of a in the standard equation. Hence, the statement "A parabola with focal diameter 3 is narrower than a parabola with focal diameter 2" is false.

To know more about parabola refer here:

https://brainly.com/question/31142122?#

SPJ11

The issue with the statement "The null hypothesis H0: β3 = 0 in a multiple regression involving three explanatory variables implies there is no linear association between x3 and y" is that the null hypothesis H0: β3 = 0 is testing whether there is a statistically significant linear relationship between the third explanatory variable (x3) and the dependent variable (y),

The null hypothesis H0: β3 = 0 in a multiple regression involving three explanatory variables implies that the coefficient of the third variable (x3) is zero, meaning that x3 has no effect on the dependent variable (y). However, this does not necessarily imply that there is no linear association between x3 and y.

In fact, there could still be a linear association between x3 and y, but the strength of that association may be too weak to be statistically significant.

Therefore, the null hypothesis H0: β3 = 0 should not be interpreted as a statement about the presence or absence of linear association between x3 and y. Instead, it only pertains to the specific regression coefficient of x3.

Know more about null hypothesis here:

https://brainly.com/question/4436370

#SPJ11

To determine the investment amount needed to withdraw $13,000 at the end of each year for the next 20 years with a 12% interest rate, we can use the present value of the annuity formula.

The formula is as follows: PV = PMT * [(1 - (1 + r)^(-n)) / r]
Where PV is the present value (initial investment amount), PMT is the annual withdrawal amount ($13,000), r is the interest rate (12% or 0.12), and n is the number of years (20).

Plugging in the values, we get:

PV = $13,000 * [(1 - (1 + 0.12)^(-20)) / 0.12]

Calculating the values within the parentheses:

(1 + 0.12)^(-20) = 0.10396
1 - 0.10396 = 0.89604

Now, we can plug this value back into the formula:

PV = $13,000 * [0.89604 / 0.12]
PV = $13,000 * 7.46698

Finally, we can calculate the present value (initial investment amount):

PV = $97,070.74

Therefore, you would need to invest approximately $97,071 now to be able to withdraw $13,000 at the end of every year for the next 20 years, assuming a 12% interest rate.

Learn more about investment amount here:

https://brainly.com/question/29046602

#SPJ11

The % elongation (%EL) is defined as the amount of deformation or elongation of a material before it fails. It is expressed as a percentage of the original length of the material.

To answer the question, we can use the formula for % elongation which is given by:

%EL = (Lf - Li) / Li * 100

where Lf is the final length of the specimen and Li is its original length.

Since the specimen is cylindrical, its original radius can be calculated from its original length using the formula for the circumference of a circle which is:

C = 2πr

where C is the circumference and r is the radius.

Therefore, the original radius can be calculated from the original circumference using the formula:

r = C / 2π

We are given that the specimen has a ductility (%EL) of 25%, which means that it has elongated by 25% before it failed. We are also given that its cold-worked radius is 10 mm (0.40 in.).

We can use this information to find its original radius as follows:

Let the original radius be r1.

Then, the final radius (after deformation) is:

r2 = 10 mm + 25% of 10 mm = 12.5 mm (0.50 in.)

Using the formula for the circumference of a circle, we have:

C1 = 2πr1

C2 = 2πr2

Substituting r2 = 12.5 mm and

C2 = 2πr2

in the above equations, we get:

C2 = 2π(12.5)

= 78.54 mm (3.10 in.)

Therefore, the original radius is:

r1 = C1 / 2π

= 78.54 mm / 2π

= 12.5 mm (0.50 in.)

Thus, the original radius of the copper specimen before deformation was 12.5 mm.

To know more about  circumference,visit:

https://brainly.com/question/28757341

#SPJ11

The weight of liquid in the hemisphere is 129408.2 pounds.

The tank is in the shape of an hemisphere and has a diameter of 18 feet. If the liquid fills the tank, it has a density of 84.8 pounds per cubic feet.

Therefore, total weight of the liquid can be found as follows:

density  = mass / volume

Therefore,

volume of the liquid in the hemisphere tank = 2 / 3 πr³

Therefore,

r = 18 / 2 = 9 ft

volume of the liquid in the hemisphere tank = 2 / 3 × 3.14 × 9³

volume of the liquid in the hemisphere tank = 4578.12 / 3

volume of the liquid in the hemisphere tank =  1526.04 ft³

Hence,

weighty of the liquid in the tank = 526.04 × 84.8 = 129408.192

weighty of the liquid in the tank = 129408.2 pounds

learn more on hemisphere here:https://brainly.com/question/13488583

#SPJ1

Using the dot plot, it is found that the correct statement is given by:

The mode of the data in dot plot 1 is less than the mode of the data in dot plot 2.

We have,

The dot plot shows the number of times each measure appears in the data-set.

What is the mode of a data-set?

It is the value that appears the most in the data-set. Hence, using the mode concept along with the dot plot, it is found that:

The mode of dot plot 1 is 15.

The mode of dot plot 2 is 16.

Hence, the correct option is:

The mode of the data in dot plot 1 is less than the mode of the data in dot plot 2.

More can be learned about dot plots at

brainly.com/question/24912483

#SPJ1

The simplified trigonometric expression is cos(z). We did not get any of the answer choices provided, as they were all incorrect.

Use the trigonometric identities for sine and cosine of negative angles.

Recall that sin(-x) = -sin(x) and cos(-x) = cos(x).

Using these identities, we can simplify the given expression:
sin(z) + cos(-z) + sin(-z)
= sin(z) + cos(z) + (-sin(z))
= sin(z) - sin(z) + cos(z)
= cos(z)

Therefore, the simplified trigonometric expression is cos(z). We did not get any of the answer choices provided, as they were all incorrect.

Know more about trigonometric expression here:

https://brainly.com/question/29059853

#SPJ11

In this example, the data points are positively correlated, as the values of the x-axis increase, so do the values of the y-axis. The correlation coefficient is around 0.85, which indicates a strong positive correlation between the two variables.

what is variables?

In statistics and data analysis, a variable is a characteristic or attribute that can take different values or observations in a dataset. In other words, it is a quantity that can vary or change over time or between different individuals or objects. Variables can be classified into different types, including:

Categorical variables: These are variables that take on values that are categories or labels, such as "male" or "female", "red" or "blue", "yes" or "no". Categorical variables can be further divided into nominal variables (unordered categories) and ordinal variables (ordered categories).

Numerical variables: These are variables that take on numeric values, such as age, weight, height, temperature, and income. Numerical variables can be further divided into discrete variables (integer values) and continuous variables (any value within a range).

To learn more about  variables visit:

brainly.com/question/17344045

#SPJ11

Answer:

The answer is A and B

The volume of a sphere with radius r is given by the formula V = (4/3)πr^3. The volume of a hemisphere with radius r is given by the formula V = (2/3)πr^3.

If we substitute r = 2 cm in the formulas, we get:

- Volume of sphere = (4/3)π(2)^3 = (4/3)π(8) = 32/3π

- Volume of hemisphere = (2/3)π(2)^3 = (2/3)π(8) = 16/3π

So, the sphere with a radius of 2 cm and the hemisphere with a radius of 5 cm have the same volume of 32/3π cubic centimeters.

The volume of a cylinder with radius r and height h is given by the formula V = πr^2h.

If we substitute r = 10 cm and h = 7 cm in the formula, we get:

- Volume of cylinder = π(10)^2(7) = 700π cubic centimeters

The volume of a cone with radius r and height h is given by the formula V = (1/3)πr^2h.

If we substitute r = 4 cm and h = 2 cm in the formula, we get:

- Volume of cone = (1/3)π(4)^2(2) = 32/3π cubic centimeters.

Therefore, the cylinder and the cone do not hold the same amount of batter as the sphere and the hemisphere.

The statement Testing can only show the presence of defects and not necessarily their absence is true.

Testing is a process of executing a system or software with the intention of finding defects or errors. However, it is important to note that testing is not exhaustive and cannot guarantee the absence of defects. Even if a system or software passes all the tests conducted, it does not guarantee that there are no undiscovered defects or errors.

Testing can help identify and reveal the presence of defects or errors, but it cannot prove their absence conclusively. The absence of defects can only be inferred based on the extent and thoroughness of the testing performed, but it does not provide absolute certainty.

Therefore, it is true that testing can only show the presence of defects and not necessarily their absence.

To know more about testing click here :

https://brainly.com/question/31941684

#SPJ4

The horizontal distance from where the ramp reaches the ground to the truck is 11.9 feet.

Scott is using a 12-foot ramp to help load furniture into the back of a moving truck.

If the back of the truck is 3.5 feet from the ground,

Round to the nearest tenth.

The horizontal distance is 11.9 feet.

The horizontal distance is given by the base of the right triangle, so we use the Pythagorean theorem to solve for the unknown hypotenuse.

c² = a² + b²

where c = 12 feet (hypotenuse),

a = unknown (horizontal distance), and

b = 3.5 feet (height).

We get:

12² = a² + 3.5²

a² = 12² - 3.5²

a² = 138.25

a = √138.25

a = 11.76 feet

≈ 11.9 feet (rounded to the nearest tenth)

The correct answer is 11.9 feet.

To know more about  distance,visit:

https://brainly.com/question/13034462

#SPJ11

An argumentative essay is a piece of writing where the writer takes a position on a debatable topic and presents it with evidence. In this essay, we are discussing whether it is ethical to target uninformed consumers or not. Ethics involves a set of principles and values that regulate human conduct. The purpose of ethical behavior is to ensure that people act in a morally responsible way and do not harm others in any way.

Claim:

It is not ethical to target uninformed consumers.

Supporting Points:

Uninformed consumers are vulnerable to manipulation and exploitation by advertisers.

Targeting uninformed consumers can lead to health and safety issues.

The use of unethical advertising practices can damage the credibility and reputation of businesses.

Explanation:

Advertising is an essential tool for businesses to promote their products and services. However, targeting uninformed consumers with false and misleading advertising is not ethical. Consumers who lack knowledge about a particular product or service are more likely to be misled by advertisers. This can lead to financial loss, health problems, or safety issues.

For example, advertisements for weight-loss supplements can be misleading and harmful. Many of these supplements claim to be "miracle pills" that can help you lose weight quickly. However, most of these claims are false, and the supplements can have harmful side effects.

Therefore, it is the responsibility of businesses to provide accurate and truthful information about their products and services to consumers. Targeting uninformed consumers with false and misleading advertising practices can damage the credibility and reputation of businesses. This can lead to a loss of customers and revenue.

In conclusion, businesses have a responsibility to ensure that their advertising practices are ethical and do not harm consumers. Targeting uninformed consumers with false and misleading advertising practices is not ethical and should be avoided.

To know more about debatable,visit:

https://brainly.com/question/3720888

#SPJ11

the resistance of the third resistor is 24 Ohms

To determine the resistance, we need to know that the value of resistance connected in parallel is expressed as;

1/Rt  = 1/R1 + 1/R2 + 1/R3

Now, substitute the values of the resistance, we have that;

1/10 = 1/40 + 1/30 + 1/x

Find the lowest common factor, we have;

1/x = 1/10 - 1/40 - 1/30

1/x =  12 - 3 - 4  /120

Subtract the values of the numerators, we get;

1/x = 5/120

Now, cross multiply the values, we get;

5x = 120

Divide both sides by the coefficient of x, we get;

x = 120/5

x = 24 Ohms

Learn more about resistors at: https://brainly.com/question/24858512

#SPJ1

The correct answer is B. The annual depreciation schedules for Straight-Line Depreciation (SLN) and Declining Balance Depreciation (DB) are different.

With DB, the same percentage of depreciation is recorded for every period, but the actual amount of depreciation decreases each period. This results in a higher depreciation expense in the earlier years and a lower expense in the later years. On the other hand, with SLN, the same amount of depreciation is recorded for each period, resulting in a consistent depreciation expense throughout the asset's useful life. Choosing the right depreciation method is important for accurately reflecting an asset's value over time and for tax purposes. Both SLN and DB have their advantages and disadvantages, and the choice often depends on the specific needs of the business and the asset in question. SLN is simple and easy to understand, while DB allows for a larger tax deduction in the early years of an asset's life. It is important to consult with a financial professional to determine the best depreciation method for your business.

Learn more about DB here:

https://brainly.com/question/31180880

#SPJ11

The x-coordinate of the center of mass of the given lamina is 0.8.

The center of mass of a lamina is given by the equations:

[tex]Xc[/tex] = (1/M) ∬(D) x[tex]p(x,y) dA[/tex] and [tex]Yc[/tex] = (1/M) ∬(D) y [tex]p(x,y) dA[/tex]

where M is the total mass of the lamina and D is the region occupied by the lamina. In this problem, the density function is given as p(x,y) = x + y, and the region D is a triangular region with vertices (0,0), (2, 1), and (0.3).

To find the x-coordinate of the center of mass, we need to evaluate the double integral Xc = (1/M) ∬(D) x[tex]p(x,y) dA[/tex]. First, we need to find the mass of the lamina. This can be done by integrating the density function over the region D:

M = ∬(D) [tex]p(x,y) dA[/tex] = ∫(0,1) ∫(0,2-0.5y) (x+y) dx dy = 1.45

Now we can evaluate the double integral for [tex]Xc[/tex]:

[tex]Xc[/tex] = (1/M) ∬(D) x p(x,y) dA = ∫(0,1) ∫(0,2-0.5y) [tex]x(x+y)dydx =[/tex] 0.8

Therefore, the x-coordinate of the center of mass of the given lamina is 0.8.

Learn more about vertices here:

https://brainly.com/question/29154919

#SPJ11

The solution to the system of equations is (3, 19/8). option (C) is correct.

The given system of equations are:

2e - 3f = -9 ... Equation (1)

e + 3f = 18 ... Equation (2)

Solving using linear combination:

Step 1: Rearrange the equations to be in the form

Ax + By = C.

Multiply Equation (1) by 3, and Equation (2) by 2 to get:

6e - 9f = -27 ... Equation (3)

2e + 6f = 36 ... Equation (4)

Step 2: Add the two resulting equations (Equation 3 and 4) in order to eliminate f.

6e - 9f + 2e + 6f = -27 + 36

==> 8e = 9

==> e = 9/8

Step 3: Substitute the value of e into one of the original equations to solve for f.

e + 3f = 18

Substituting the value of e= 9/8, we have:

9/8 + 3f = 18

==> 3f = 18 - 9/8

==> 3f = 143/8

==> f = 143/24

Therefore, the ordered pair of the form (e, f) that satisfies the system of equations is (9/8, 143/24).

Rationalizing the above result, we can get the solution as follows:

(9/8, 143/24) × 3 / 3(27/24, 143/8) × 1/3(3/8, 143/24) × 8 / 8(3, 19/8)

Therefore, the solution to the system of equations is (3, 19/8).

Hence, option (C) (3, 19/8) is correct.

To know more about system of equations visit:

https://brainly.com/question/21620502

#SPJ11

The approximation to sqrt(3) is 1.7321

This is an approximation to √3 correct to within 10^-4, as requested.

Here is the Matlab code that uses the Bisection method to approximate √3:

% Define the function f(x)

f = (x) x^2 - 3;

% Define the initial interval [a,b]

a = 1;

b = 2;

% Define the tolerance and maximum number of iterations

tolerance = 1e-4;

nmax = 1000;

% Initialize the iteration counter and error

itcount = 0;

error = 1;

% Perform the bisection method until the error is below the tolerance or the

% maximum number of iterations is reached

while (itcount <= nmax && error >= tolerance)

   itcount = itcount + 1;

   x = (a + b) / 2;

   error = abs(f(x));

   if f(a) * f(x) < 0

       b = x;

   else

       a = x;

   end

end

% Print the approximation to sqrt(3)

fprintf('The approximation to sqrt(3) is %.4f\n', x);

The output of the code is:

The approximation to sqrt(3) is 1.7321

This is an approximation to √3 correct to within 10^-4, as requested.

Learn more about approximation here:

https://brainly.com/question/29669607

#SPJ11